Search NASA⌕ Search

SEARCH · Search NASA

Results for “dynamics simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Nucleotide-dependence of G-actin conformation from multiple molecular dynamics simulations and observation of a putatively polymerization-competent superclosed state

The assembly of monomeric G-actin into filamentous F-actin is nucleotide dependent: ATP-G-actin is favored for filament growth at the “barbed end” of F-actin, whereas ADP-G-actin tends to dissociate from the “pointed end.” Structural differences between ATP- and ADP-G-actin are examined here using multiple molecular dynamics simulations. The “open” and “closed” conformational states of G-actin in aqueous solution are characterized, with either ATP or ADP in the nucleotide binding pocket. With both ATP and ADP bound, the open state closes in the absence of actin-bound profilin. The position of the nucleotide in the protein is found to be correlated with the degree of opening of the active site cleft. The simulations further reveal the existence of a structurally well-defined, compact, “superclosed” state of ATP-G-actin, as yet unseen crystallographically and absent in the ADP-G-actin simulations. The superclosed state resembles structurally the actin monomer in filament models derived from fiber diffraction and is putatively the polymerization competent conformation of ATP-G-actin.

59 BASIC BIOLOGICAL SCIENCES↗

Molecular dynamics simulations of radiation cascade evolution near cellular dislocation structures in additively manufactured stainless steels

The dislocation dense cellular structures observed in additively manufactured (AM) stainless steels can allow these materials to have enhanced strength and ductility compared to conventionally manufactured materials. Effective design of radiation resistant materials often necessitates creating microstructures containing of a high density of dislocations that act as sinks for radiation induced defects. This work uses molecular dynamics simulations to study the impact of pre-existing defects on radiation damage in stainless steel 316L fabricated by the laser powder bed fusion process. The evolution of synthetically generated dislocations in a crystal system in response to multiple radiation collision cascades suggest that dislocation dense regions reduce the probability of surviving point defects forming clusters. This finding seems to result from the dislocation cores’ ability to absorb point defects, thereby limiting the formation of clusters during the recombination phase. However, after successive cascades, the ability of the dislocation entanglement to prevent defect formation is diminished and defect cluster formation trends to an equilibrium. Accordingly, it is hypothesized that in an experimental setting the dislocation cells will initially act as neutral sinks for point defects, potentially delaying the onset of radiation damage effects; but, these structures will be degraded due to radiation-enhanced diffusion and lose their effectiveness at doses above 1.5–2 displacements per atom. Nevertheless, the ability to produce complex and feature-specific microstructures suggests promise for the design of radiation tolerant materials using AM methods.

36 MATERIALS SCIENCE↗

Ab initio molecular dynamics simulations of short-range order in Zr 50 Cu 45 Al 5 and Cu 50 Zr 45 Al 5 metallic glasses

Comparative analysis between Zr-rich Zr 50 Cu 45 Al 5 and Cu-rich Cu 50 Zr 45 Al 5 metallic glasses (MGs) is extensively performed to locate the key structural motifs accounting for their difference of glass forming ability. Here we adopt ab initio molecular dynamics simulations to investigate the local atomic structures of Zr 50 Cu 45 Al 5 and Cu 50 Zr 45 Al 5 MGs. A high content of icosahedral-related (full and distorted) orders was found in both samples, while in the Zr-rich MG full icosahedrons < 0,0,12,0 > is dominant, and in the Cu-rich one the distorted icosahedral orders, especially < 0,2,8,2 > and < 0,2,8,1 >, are prominent. And the < 0,2,8,2 > polyhedra in Cu 50 Zr 45 Al 5 MG mainly originate from Al-centered clusters, while the < 0,0,12,0 > in Zr 50 Cu 45 Al 5 derives from both Cu-centered clusters and Al-centered clusters. These difference may be ascribed to the atomic size difference and chemical property between Cu and Zr atoms. Lastly, the relatively large size of Zr and large negative heat of mixing between Zr and Al atoms, enhancing the packing density and stability of metallic glass system, may be responsible for the higher glass forming ability of Zr 50 Cu 45 Al 5 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fast neutrino cooling of nuclear pasta in neutron stars: Molecular dynamics simulations

The direct Urca process of rapid neutrino emission can occur in nonuniform nuclear pasta phases that are expected in the inner crusts of neutron stars. Here, the periodic potential for a nucleon in nuclear pasta allows momentum conservation to be satisfied for direct Urca reactions. We improve on earlier work by modeling a rich variety of pasta phases (gnocchi, waffle, lasagna, and anti-spaghetti) with large-scale molecular dynamics simulations. We find that the neutrino luminosity due to direct Urca reactions in nuclear pasta can be 3 to 4 orders of magnitude larger than that from the modified Urca process in the NS core. Thus neutrino radiation from pasta could dominate radiation from the core and this could significantly impact the cooling of neutron stars.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Plant-wide dynamic simulation of an IGCC plant with CO2 capture

To eliminate the harmful effects of greenhouse gases, especially that of CO2, future coalfired power plants need to consider the option for CO2 capture. The loss in efficiency for CO2 capture is less in an Integrated Gasification Combined Cycle (IGCC) plant compared to other conventional coal combustion processes. However, no IGCC plant with CO2 capture currently exists in the world. Therefore, it is important to consider the operability and controllability issues of such a plant before it is commercially built. With this objective in mind, a detailed plant-wide dynamic simulation of an IGCC plant with CO2 capture has been developed. The plant considers a General Electric Energy (GEE)-type downflow radiant-only gasifier followed by a quench section. A two-stage water gas shift (WGS) reaction is considered for conversion of about 96 mol% of CO to CO2. A two-stage acid gas removal (AGR) process based on a physical solvent is simulated for selective capture of H2S and CO2. The clean syngas is sent to a gas turbine (GT) followed by a heat recovery steam generator (HRSG). The steady state results are validated with data from a commercial gasifier. A 5 % ramp increase in the flowrate of coal is introduced to study the system dynamics. To control the conversion of CO at a desired level in the WGS reactors, the steam/CO ratio is manipulated. This strategy is found to be efficient for this operating condition. In the absence of an efficient control strategy in the AGR process, the environmental emissions exceeded the limits by a great extent.

01 COAL, LIGNITE, AND PEAT↗

Initial beam dynamics simulations of a high-average-current field-emission electron source in a superconducting radiofrequency gun

High-power electron beams are sought-after tools in support to a wide array of societal applications. This paper explores the production of high-power electron beams by combining a high-current field-emission electron source to a superconducting radio-frequency (SRF) cavity. We especially carry out beam-dynamics simulations that demonstrate the viability of the scheme to form ~ 300 kW average-power electron beam using a 1+1/2-cell SRF gun.

43 PARTICLE ACCELERATORS↗

Molecular Modeling and Molecular Dynamics Simulation of a Packed and Intact Bacterial Microcompartment

Bacterial microcompartments (BMCs) are protein-bound organelles found in some bacteria which encapsulate enzymes for enhanced catalytic activity. These compartments spatially sequester enzymes within semipermeable shell proteins and are packed full of enzyme cargoes and metabolites as they fulfill their function. Coupling together recent SAXS and proteomics work, it is possible to develop molecular models for these microcompartments and interrogate enzyme and metabolite dynamics within. Our primary goal of this study is to quantify the permeability of metabolite glyceraldehyde-3-phosphate (G3P) and dihydroxyacetone phosphate (DHAP) across the BMC shell through classical molecular dynamics simulation. The Haliangium ochraceum model of BMC shell (PDB: 6MZX) was used to model an intact BMC of approximately 10 million atoms. Working at this scale presented its own challenges in managing large data sets, with multiple challenges and hardware advances discussed that facilitated this work. Over approximately 750 ns of aggregate simulation, we see multiple permeation events for these metabolites that were added at high concentration through the pores present within BMC shell tiles. When compared to independent permeability estimates for the same metabolites determined through replica exchange umbrella sampling simulations, the permeabilities varied by approximately 3 orders of magnitude. Regardless, the permeability coefficients for both G3P and DHAP are highly similar and very high, such that only very small concentration gradients can be maintained across the BMC shell between the cytosol and BMC interior. The large simulation systems also facilitated comparisons for molecular diffusivity in the crowded environment within the BMC shell. By our estimates, the viscosity within a packed BMC shell is at least 10-fold higher than it would be in neat solution and is the real driver for varying permeability estimates we obtained through simulation. These findings will be used as design inputs for future bioengineering efforts to make products from BMCs, highlighting how permeable BMC shells can be.

Diffusion↗

Beam dynamics simulations of the NML photoinjector at Fermilab

Fermilab is currently constructing a superconducting RF (SRF) test linear accelerator at the New Muon Lab (NML). Besides testing SRF accelerating modules for ILC and Project-X, NML will also eventually support a variety of advanced accelerator R&D experiments. The NML incorporates a 40 MeV photoinjector capable of providing electron bunches with variable parameters. The photoinjector is based on the 1+1/2 cell DESY-type gun followed by two superconducting cavities. It also includes a magnetic bunch compressor, a round-to-flat beam transformer and a low-energy experimental area for beam physics experiments and beam diagnostics R&D. In this paper, we explore, via beam dynamics simulations, the performance of the photoinjector for different operating scenarios.

43 PARTICLE ACCELERATORS↗

Molecular Origin of Nanoscale Anion Ordering of LiTFSI Electrolytes Revealed through SAXS/WAXS and Molecular Dynamics Simulations

Recent developments in “water-in-salt” electrolytes have precipitated a renewed effort to study imide-based electrolytes. While previous small-/wide-angle X-ray scattering (SAXS/WAXS) studies have attributed the emergence of a low-Q peak in the SAXS profile of aqueous LiTFSI electrolytes to nanometer-scale anion clustering, a molecular-level understanding of the root of these clusters remains unclear. Here, in this study, we combined molecular dynamics simulations and SAXS/WAXS to study the solvation structures of LiTFSI in acetonitrile, methanol, and water. We concluded that hydrogen bonding in water and MeOH stabilizes anion clusters, while nonpolar methyl groups on methanol and acetonitrile interrupt the nanoscale ordering of TFSI anions. This causes LiTFSI in water and MeOH electrolytes to exhibit two low-Q SAXS profile peaks while LiTFSI in acetonitrile exhibits only a single peak below Q = 1 Å –1 . These findings shed light on the underlying molecular origins of nanoscale anion clusters, which may help in the design of the next generation of electrolyte chemistries.

Trojanowski, Lucas [Univ. of Michigan, Ann Arbor, ↗

Reactive molecular dynamics simulations of an excess proton in polyethylene glycol-water solutions

We investigate the effects of both triethylene glycol (TEG) and polyethylene glycol (PEG) on the structure and transport of an excess proton (H + ) in aqueous solution. A new reactive force field (ReaxFF) parameterisation is carried out to better describe proton transfer of H + with PEG polymers in aqueous solution via training against density functional theory (DFT) calculations. Using this ReaxFF parameterisation, reactive molecular dynamics simulations are carried out for three different systems containing H + : bulk water, aqueous TEG, and aqueous PEG with a single, oriented polymer chain. The H + diffusivity is suppressed due to the presence of TEG and enhanced in the oriented chain PEG system, particularly along the axis parallel to the PEG chain, relative to bulk water. The enhancement in proton mobility along the chain axis is mainly due to the structural, rather than vehicular, component. From free energy calculations for H + transfer, the increase in proton mobility is not due to a reduction in activation energy. Finally, from pair distribution function analysis of the local structure for water and hydronium we hypothesise the increased mobility is due to an entropic effect, specifically a favourable hydrogen bond network for long range proton transport due to the oriented PEG chain.

36 MATERIALS SCIENCE↗

Integrated atomistic chemical imaging and reactive force field molecular dynamic simulations on silicon oxidation

In this paper, we quantitatively investigate with atom probe tomography, the effect of temperature on the interfacial transition layer suboxide species due to the thermal oxidation of silicon. The chemistry at the interface was measured with atomic scale resolution, and the changes in chemistry and intermixing at the interface were identified on a nanometer scale. We find an increase of suboxide (SiOx) concentration relative to SiO{sub 2} and increased oxygen ingress with elevated temperatures. Our experimental findings are in agreement with reactive force field molecular dynamics simulations. This work demonstrates the direct comparison between atom probe derived chemical profiles and atomistic-scale simulations for transitional interfacial layer of suboxides as a function of temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ab-initio informed cluster dynamics simulation of self- and Xe diffusivity in uranium mononitride under irradiation

Uranium mononitride (UN) is one of the ceramic nuclear fuel alternatives to oxide fuels considered for light water reactor and advanced reactor designs, as it presents significant advantages such as high uranium density (better economics) and high thermal conductivity and melting point (increased safety). Self- and fission gas diffusivities need to be better understood, given that they influence key fuel performance phenomena like swelling and fission gas release. Recently, radiation enhanced diffusivity was investigated in UN by means of cluster dynamics simulations relying on empirical potential-based parameterizations, the reliability of which highly depends on the interatomic potential accuracy. Here, in this work, we refine this approach by determining, using ab-initio calculations, the properties of defect clusters containing vacancies, self-interstitials and Xe impurities. We also consider larger clusters than previous studies. The obtained dataset (formation enthalpies, entropies, and migration barriers) is used to parameterize a cluster dynamics model of mobile clusters, and to calculate the defect cluster concentrations under irradiation. This gives us access to the radiation enhanced self- and fission gas diffusivities. Although the resulting diffusivities are close to the values reported in the literature, we find important qualitative differences in the diffusion mechanisms. Capturing the correct mechanisms is crucial to properly describe the chemistry and fission rate dependence of the model.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Effect of Solvents on Lignin–Surface Interactions via Molecular Dynamics Simulations

Lignin, an essential building block of lignocellulosic biomass, is a potential abundant source of aromatic monomers for the polymer and chemical industry. Reductive catalytic fractionation (RCF) is one promising process that can produce high yields of phenolic monomers and oligomers from lignin under different catalytic conditions. An important choice in optimizing RCF is the selection of solvent; however, detailed insights into solvent effects on lignin behaviors and interactions remain limited. Here, in this work, we perform all-atom molecular dynamics simulations to study the solvation of lignin, solvent-mediated conformational changes, and the interaction of solvated lignin oligomers with model surfaces. We focus on the behavior of an oligomeric lignin model compound in methanol, ethanol, a binary mixture of ethanol and water, and water at both the RCF reaction temperature (473 K) and room temperature. Analysis of structural features of lignin suggests that these three organic solvent systems favorably solvate lignin, resulting in a more extended conformation suitable for catalytic conversion to valuable chemicals. We further introduce model palladium (Pd) and carbon (C) surfaces to understand how solvent choice impacts adsorption onto a representative catalytic surface and support, and to quantify the competition among the reactant and solvent molecules for the surface. Unbiased simulations suggest strong adsorption of lignin on both Pd and C surfaces at 473 K, with notable solvent-mediated differences in adsorption energies. Additionally, our findings indicate that lignin adsorption is promoted by the entropy change resulting from the displacement of solvent molecules from the surface. This study provides a molecular perspective of adsorption of lignin onto varying surfaces, which is a step towards understanding and optimizing the catalytic conversion of lignin into valuable chemicals.

adsorption↗

Statistically averaged molecular dynamics simulations of hydrogen diffusion in magnesium and magnesium hydrides

Magnesium has a different crystal structure from its dihydride with hydrogenation leading to a phase transition from the hexagonal closely packed Mg into a tetragonal α-MgH 2 rutile type structure. Such materials exhibit complex hydrogen uptake and release kinetics because hydrogen diffusivities significantly change when the crystal structure changes. To provide a foundational understanding of (de)hydrogenation kinetics that is applicable to all stages of the reaction, we performed statistically averaged molecular dynamics simulations to derive hydrogen diffusivities as a function of temperature and hydrogen content for both magnesium and magnesium hydride. Furthermore, our studies confirm that hydrogen diffusivities in magnesium hydride are much lower than in magnesium, in agreement with experimental data. Additionally, we observe that in either magnesium or magnesium hydride, higher hydrogen compositions result in reduced diffusivities. The latter was not revealed by prior experiments, which were conducted at fixed hydrogen composition. Finally, we discover a non-Arrhenius behavior in magnesium hydride. The physical origin of this behavior is also discussed.

36 MATERIALS SCIENCE↗

Cell dynamics simulations of coupled charge and magnetic phase transformation in correlated oxides

In this work, we present a comprehensive numerical study on the kinetics of phase transition that is characterized by two nonconserved scalar order parameters coupled by a special linear-quadratic interaction. This particular Ginzburg-Landau theory has been proposed to describe the coupled charge and magnetic transition in nickelates and the collinear stripe phase in cuprates. The inhomogeneous state of such systems at low temperatures consists of magnetic domains separated by quasimetallic domain walls where the charge order is reduced. By performing large-scale cell dynamics simulations, we find a two-stage phase-ordering process in which a short period of independent evolution of the two order parameters is followed by a correlated coarsening process. The long-time growth and coarsening of magnetic domains is shown to follow the Allen-Cahn power law. We further show that the nucleation-and-growth dynamics during phase transformation to the ordered states is well described by the Kolmogorov-Johnson-Mehl-Avrami theory in two dimensions. On the other hand, the presence of quasimetallic magnetic domain walls in the ordered states gives rise to a very different kinetics for transformation to the high-temperature paramagnetic phase. In this scenario, the phase transformation is initiated by the decay of magnetic domain walls into two insulator-metal boundaries, which subsequently move away from each other. Implications of our findings to recent nano-imaging experiments on nickelates are also discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Molecular dynamics simulations of uranyl and plutonyl cations in a task-specific ionic liquid

Ionic liquids (ILs) are a unique class of solvents with potential applications in advanced separation technologies relevant to the nuclear industry. ILs are salts with low melting points and a wide range of tunable physical properties, such as viscosity, hydrophobiciy, conductivity, and liquidus range. ILs have negligible vapor pressure, are often non-flammable, and can have high thermal stability and a wide electrochemical window, making them attractive for use in separations processes relevant to the nuclear industry. Metal salts generally have a low solubility in ILs; however, by incorporating new functional groups into the IL cation or anion that promote complexation with the metal, the solubility can be greatly increased. One such task-specific ionic liquid (TSIL) is 1-carboxy-N, N, N-trimethylglycine bis(trifluoromethylsulfonyl)imide ([Hbet][Tf 2 N]). Water, which is detrimental for electrochemical separations, is a common impurity in ILs and can coordinate with actinyl cations, particularly in ILs containing only weakly coordinating components. Understanding the behavior of actinides in TSIL/water mixtures on a molecular level is vital for designing improved separations processes. Classical molecular dynamics simulations of uranyl(VI) and plutonyl(VI) in 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIM][Tf 2 N]) with deprotonated Hbet (betaine) and water have been performed to understand the coordination and dynamics of the actinyl cations. We find that betaine is a much stronger ligand than water and prefers to coordinate the metal in a bidentate manner. Potential of mean force simulations yield a relative free energy for betaine coordination of approximately -120 to -90 kJ/mol in mixtures with water. As the amount of betaine coordinated to the actinide increases, the diffusion coefficient of the actinyl cation decreases. Moreover, the betaine ligand is able to bridge between two metal centers, resulting in dimeric complexes with actinide–actinide distances of ~5 Å. Potential of mean force simulations show that these structures are stable, with relative free energies of up to -40 kJ/mol. The crystal structure for [(UO 2 ) 2 (bet) 6 (H 2 O) 2 ][Tf 2 N] 4 shows that the betaine bridges between two uranium atoms to form dimeric complexes similar to those found in our simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Computational Evaluation of Mg–Salen Compounds as Subsurface Fluid Tracers: Molecular Dynamics Simulations in Toluene–Water Mixtures and Clay Mineral Nanopores

Molecular tracers that can be selectively placed underground and uniquely identified at the surface using simple on-site spectroscopic methods would significantly enhance subsurface fluid monitoring capabilities. To ensure their widespread utility, the solubility of these tracers must be easily tuned to oil- or water-wet conditions as well as reducing or eliminating their propensity to adsorb onto subsurface rock and/or mineral phases. In this work, molecular dynamics simulations were used to investigate the relative solubilities and mineral surface adsorption properties of three candidate tracer compounds comprising Mg–salen derivatives of varying degrees of hydrophilic character. Simulations in water–toluene liquid mixtures indicate that the partitioning of each Mg–salen compound relative to the interface is strongly influenced by the degree of hydrophobicity of the compound. Simulations of these complexes in fluid-filled mineral nanopores containing neutral (kaolinite) and negatively charged (montmorillonite) mineral surfaces reveal that adsorption tendencies depend upon a variety of parameters, including tracer chemical properties, mineral surface type, and solvent type (water or toluene). Simulation snapshots and averaged density profiles reveal insight into the solvation and adsorption mechanisms that control the partitioning of these complexes in mixed liquid phases and nanopore environments. As a result, this work demonstrates the utility of molecular simulation in the design and screening of molecular tracers for use in subsurface applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗