Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrical double layer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Electrolyte Regulating toward Stabilization of Cobalt-Free Ultrahigh-Nickel Layered Oxide Cathode in Lithium-Ion Batteries

Cobalt (Co)-free ultrahigh-nickel (Ni) layered oxides exhibit a double-edged competitive advantages in reducing the cathode cost and boosting the energy density, promising the sustainable development of batteries for electric vehicles. However, the increased Ni content, resultantly more highly oxidative Ni 4+ , potentially induces severe capacity fading due to the aggravated side reactions, limiting the practical applications. Here, we evaluate the compatibility of two localized high-concentration electrolytes (LHCEs) with LiNi 0.96 Mg 0.02 Ti 0.02 O 2 (NMT) cathode under a high charging voltage of 4.4 V in lithium ion batteries. The LHCE with EC additive enables the formation of stable interfacial layers on both NMT cathode and graphite anode, thus realizing a capacity retention of 97.2% over 200 cycles at 25 °C and high reversible capacities of ~180.2 and ~185.8 mAh g -1 , respectively, at 5C charge rate and 5C discharge rate. This study offers a promising approach to enable Co-free ultrahigh-Ni layered oxides for practical applications.

25 ENERGY STORAGE↗

The induced magnetic field of the moon - Conductivity profiles and inferred temperature.

Electromagnetic induction in the moon driven by fluctuations of the interplanetary magnetic field is used to determine the lunar bulk electrical conductivity. The earlier data are now augmented by an order of magnitude. The present data clearly show the north-south and east-west transfer function difference as well as the high-frequency rollover suggested earlier. The difference is shown to be compatible over the midfrequency range (0.001 to 0.01 Hz) with a noise source associated with the compression of the local remanent field by solar wind dynamic pressure fluctuations. The rollover of the transfer functions is shown to result from higher order magnetic multipole radiation; electric multipoles appear supressed, although a vestigial TM interaction may still be present. Models for two, three, and four layer; current layer, double current layer, and core plus current layer moons are generated by inversion of the data, using a theory that incorporates higher-order multipoles.

Sonett, C. P.↗

The polar ionosphere as a source of the storm time ring current

The transport of ions from the polar ionosphere to the inner magnetosphere during storm time conditions has been computed using a Monte Carlo diffusion code. The effect of the electrostatic turbulence assumed to be present during the substorm expansion phase was simulated by a process that accelerated the ions stochastically perpendicular to the magnetic field with a diffusion coefficient proportional to the rate of energization of the ions by the induced electric field. This diffusion process was continued as the ions were convected from the plasma sheet boundary layer to the double-spiral injection boundary. Inward of the injection boundary the ions were convected adiabatically. By using as input an O(+) flux of 2.8 x 10 to the 8th per sq cm per s (w greater than 10 eV) and an H(+) flux of 5.5 x 10 to the 8th per sq cm per s (w greater than .63 eV) the computed distribution functions of the ions in the ring current were found to be in good agreement, over a wide range in L (4-8), with measurements made with the ISEE 1 satellite during a storm. This O(+) flux and a large part of the H(+) flux appear to be consistent with the DE-1 and DE-2 satellite measurements of the polar ionospheric outflow during disturbed times.

Cladis, J. B.↗

Transport of ions in presence of induced electric field and electrostatic turbulence - Source of ions injected into ring current

The transport of ions from the polar ionosphere to the inner magnetosphere during stormtime conditions has been computed using a Monte Carlo diffusion code. The effect of the electrostatic turbulence assumed to be present during the substorm expansion phase was simulated by a process that accelerated the ions stochastically perpendicular to the magnetic field with a diffusion coefficient proportional to the energization rate of the ions by the induced electric field. This diffusion process was continued as the ions were convected from the plasma sheet boundary layer to the double-spiral injection boundary. Inward of the injection boundary, the ions were convected adiabatically. By using as input an O(+) flux of 2.8 x 10 to the 8th per sq cm per s (w greater than 10 eV) and an H(+) flux of 5.5 x 10 to the 8th per sq cm per s (w greater than 0.63 eV), the computed distribution functions of the ions in the ring current were found to be in good agreement, over a wide range in L (4 to 8), with measurements made with the ISEE-1 satellite during a storm. This O(+) flux and a large part of the H(+) flux are consistent with the DE satellite measurements of the polar ionospheric outflow during disturbed times.

Cladis, J. B.↗

Thermodynamic Theory of Proximity Ferroelectricity

Proximity ferroelectricity has recently been reported as a new design paradigm for inducing ferroelectricity, where a nonferroelectric polar material becomes a ferroelectric one by interfacing with a thin ferroelectric layer. Strongly polar materials, such as AlN and ZnO, which were previously unswitchable with an external field below their dielectric breakdown fields, can now be switched with practical coercive fields when they are in intimate proximity to a switchable ferroelectric. Here, we develop a general Landau-Ginzburg theory of proximity ferroelectricity in multilayers of nonferroelectrics and ferroelectrics to analyze their switchability and coercive fields. The theory predicts regimes of both “proximity switching,” where the multilayers collectively switch, and “proximity suppression,” where they collectively do not switch. The mechanism of the proximity ferroelectricity is an internal electric field determined by the polarization of the layers and their relative thickness in a self-consistent manner that renormalizes the double-well ferroelectric potential to lower the steepness of the switching barrier. Further reduction in the coercive field emerges from charged defects in the bulk that act as nucleation centers. The application of the theory to proximity ferroelectricity in Al x−1⁢ Sc x ⁢N/AlN and Zn 1−x ⁢Mg x ⁢O/ZnO bilayers is demonstrated. The theory further predicts that dielectric-ferroelectric and paraelectric-ferroelectric multilayers can potentially lead to induced ferroelectricity in the dielectric or paraelectric layers, resulting in the entire stack being switched, an exciting avenue for new discoveries. This thawing of “frozen ferroelectrics,” paraelectrics, and potentially dielectrics with high dielectric constants promises a large class of new ferroelectrics with exciting prospects for previously unrealizable domain-patterned optoelectronic and memory technologies.

36 MATERIALS SCIENCE↗

Nonlinear electric field structures in the inner magnetosphere

Recent observations by the Van Allen Probes spacecraft have demonstrated that a variety of electric field structures and nonlinear waves frequently occur in the inner terrestrial magnetosphere, including phase space holes, kinetic field-line resonances, nonlinear whistler-mode waves, and several types of double layer. However, it is nuclear whether such structures and waves have a significant impact on the dynamics of the inner magnetosphere, including the radiation belts and ring current. To make progress toward quantifying their importance, this study statistically evaluates the correlation of such structures and waves with plasma boundaries. A strong correlation is found. These statistical results, combined with observations of electric field activity at propagating plasma boundaries, are consistent with the identification of these boundaries as the source of free energy responsible for generating the electric field structures and nonlinear waves of interest. Therefore, the ability of these structures and waves to influence plasma in the inner magnetosphere is governed by the spatial extent and dynamics of macroscopic plasma boundaries in that region.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Mesoscale Phase-Field Modeling of Charge Transport in Nanocomposite Electrodes for Lithium-ion Batteries

A phase-field model is developed to investigate the influence of microstructure, thermodynamic and kinetic properties, and charging conditions on charged particle transport in nanocomposite electrodes. Two sets of field variables are used to describe the microstructure. One is comprised of the order parameters describing size, orientation and spatial distributions of nanoparticles, and the other is comprised of the concentrations of mobile species. A porous nanoparticle microstructure filled with electrolyte is taken as a model system to test the phase-field model. Inhomogeneous and anisotropic dielectric constants and mobilities of charged particles, and stresses associated with lattice deformation due to Li-ion insertion/extraction are considered in the model. Iteration methods are used to find the elastic and electric fields in an elastically and electrically inhomogeneous medium. The results demonstrate that the model is capable of predicting charge separation associated with the formation of a double layer at the electrochemical interface between solid and electrolyte, and the effect of microstructure, inhomogeneous and anisotropic thermodynamic and kinetic properties, charge rates, and stresses on voltage versus current density and capacity during charging and discharging.

Hu, Shenyang Y↗

Oxygen nonstoichiometry, thermal expansion and high-temperature electrical properties of layered NdBaCo{sub 2}O{sub 5+{delta}} and SmBaCo{sub 2}O{sub 5+{delta}}

Layered LnBaCo{sub 2}O{sub 5+{delta}} (Ln = Nd, Sm) with the cation-ordered double perovskite structure were synthesized by the solid-state reaction route and characterized by X-ray diffraction, thermogravimetric analysis and dilatometry. For NdBaCo{sub 2}O{sub 5.73} and SmBaCo{sub 2}O{sub 5.61} equilibrated with atmospheric oxygen at low temperatures, tetragonal and orthorhombic polymorphs were found to form, respectively. The oxygen content at 300-1300 K decreases with decreasing rare-earth cation size, whilst {delta} variations and chemical contribution to the apparent thermal expansion in air are substantially lower compared to the disordered (Ln, A)CoO{sub 3-{delta}} (A = Ca, Sr) analogues. The average thermal expansion coefficients are 23.1 x 10{sup -6} K{sup -1} for NdBaCo{sub 2}O{sub 5+{delta}} and 20.8 x 10{sup -6} K{sup -1} for SmBaCo{sub 2}O{sub 5+{delta}} at 300-1370 K and atmospheric oxygen pressure. These values are comparable to those of Bi{sub 2}O{sub 3}-based ionic conductors, but are incompatible with common electrolytes such as stabilized zirconia or doped ceria. The oxygen partial pressure dependencies of the total conductivity and Seebeck coefficient, studied in the P(O{sub 2}) range from 10{sup -10} to 1 atm, confirm predominant p-type electronic conductivity.

36 MATERIALS SCIENCE↗

Impedimetric investigation of gold nanoparticles - guanine modified electrode

In this paper we report the preparation of a modified electrode with gold nanoparticles and guanine. The colloidal suspension of gold nanoparticles was obtained by Turkevich method and was next analyzed by UV-Vis spectroscopy and Transmission Electron Microscopy (TEM). The gold electrode was modified by self-assembling the gold nanoparticles with guanine, the organic molecule playing also the role of linker. The electrochemical characteristics of the bare and modified electrode were investigated by Electrochemical Impedance Spectroscopy (EIS). A theoretical model was developed based on an electrical equivalent circuit which contain solution resistance (R{sub s}), charge transfer resistance (R{sub ct}), Warburg impedance (Z{sub W}) and double layer capacitance (C{sub dl})

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The platinum microelectrode/Nafion interface - An electrochemical impedance spectroscopic analysis of oxygen reduction kinetics and Nafion characteristics

The objectives of this study were to use electrochemical impedance spectroscopy (EIS) to study the oxygen-reduction reaction under lower humidification conditions than previously studied. The EIS technique permits the discrimination of electrode kinetics of oxygen reduction, mass transport of O2 in the membrane, and the electrical characteristics of the membrane. Electrode-kinetic parameters for the oxygen-reduction reaction, corrosion current densities for Pt, and double-layer capacitances were calculated. The production of water due to electrochemical reduction of oxygen greatly influenced the EIS response and the electrode kinetics at the Pt/Nafion interface. From the finite-length Warburg behavior, a measure of the diffusion coefficient of oxygen in Nafion and diffusion-layer thickness was obtained. An analysis of the EIS data in the high-frequency domain yielded membrane and interfacial characteristics such as ionic conductivity of the membrane, membrane grain-boundary capacitance and resistance, and uncompensated resistance.

Parthasarathy, Arvind↗

Particle acceleration in flares

Particle acceleration is intrinsic to the primary energy release in the impulsive phase of solar flares, and we cannot understand flares without understanding acceleration. New observations in soft and hard X-rays, gamma-rays and coherent radio emissions are presented, suggesting flare fragmentation in time and space. X-ray and radio measurements exhibit at least five different time scales in flares. In addition, some new observations of delayed acceleration signatures are also presented. The theory of acceleration by parallel electric fields is used to model the spectral shape and evolution of hard X-rays. The possibility of the appearance of double layers is further investigated.

Benz, Arnold O.↗

Artificial stimulation of auroral electron acceleration by intense field aligned currents

A cesium-doped high explosion was detonated at 165 km altitude in the auroral ionosphere during quiet conditions. An Alfven wave pulse with a 200-mV/m electric field was observed, with the peak occurring 135 ms after the explosion at a distance of about 1 km. The count rate of fixed energy 2-keV electron detectors abruptly increased at 140 ms, peaked at 415 ms, and indicated a downward field-aligned beam of accelerated electrons. An anomalously high-field aligned beam of backscattered electrons was also detected. The acceleration is interpreted as due to production of an electrostatic shock or double layer between 300 and 800 km altitude. The structure was probably formed by an instability of the intense field-aligned currents in the Alfven wave launched by the charge-separation electric field due to the explosion.

Holmgren, G.↗

Dielectric and ferroelectric response of compositionally graded bilayer and trilayer composites of BaTiO{sub 3} and 0.975BaTiO{sub 3}-0.025Ba(Cu{sub 1/3}Nb{sub 2/3})O{sub 3}

In this paper, we report the dielectric and ferroelectric response of compositionally graded bilayer and trilayer composites consisting of BaTiO{sub 3} (BT) and 0.975BaTiO{sub 3}-0.025Ba(Cu{sub 1/3}Nb{sub 2/3})O{sub 3} (BTBCN). Two types of graded bilayer samples were synthesized, one with same thickness of BT and BTBCN while other with different layer thicknesses. The graded trilayer sample consisted of BT layer sandwiched between two BTBCN layers of equal thickness. Scanning electron microscopy and transmission electron microscopy images showed a sharp interface with needle-shape domains across the interface. The domain size on BT side was found to be larger than that on BTBCN side. The temperature dependence of dielectric response for all composite systems was found to exhibit shifting in characteristic Curie peak compared to constituent material which was associated to coupling between layers. Moreover, the differences in grain size, tetragonality, domain mobility of each layer was found to perturb the electrical response of composite. The polarization mismatch between uncoupled BT and BTBCN established internal electric field in composite specimen and defined new polarization states in each layer by perturbing free energy functional of the composite specimen. Dynamic hysteresis behaviors and power-law scaling relations of all specimens were determined from polarization-electric field hysteresis loop measurements as a function of frequency. All systems were found to exhibit similar dynamic scaling relationships. Hysteresis area <A>, P{sub r}, and E{sub C} decreased with increasing frequency due to delayed response but increased with increasing applied electric field due to enhancement of driving force. Trilayer system was found to exhibit strong internal-bias field and double hysteresis behavior. The coupling effect resulting due to polarization mismatch between layers had substantial influence on the dynamic hysteresis behavior and power-law scaling relations.

36 MATERIALS SCIENCE↗

Challenges in Modeling Electrochemical Reaction Energetics with Polarizable Continuum Models

A major challenge in the modeling of electrochemical phenomena is the accurate description of the interface between an electrolyte and a charged conductor. Polarizable continuum models (PCM) have been gaining popularity because they offer a computationally inexpensive method of modeling the electrolyte. In this Perspective, we discuss challenges from using one such model which treats the ions using a linearized Poisson–Boltzmann (LPB) distribution. From a physical perspective, this model places charge unphysically close to the surface and adsorbates, and it includes excessively steep ramping of the dielectric constant from the surface to the bulk solvent. Both of these issues can be somewhat mitigated by adjusting parameters built into the model, but in doing so, the resultant capacitance deviates from experimental values. Likewise, hybrid explicit-implicit approaches to the solvent may offer a more realistic description of hydrogen bonding and solvation to reaction intermediates, but the corresponding capacitances also deviate from experimental values. These deviations highlight the need for a careful adjustment of parameters in order to reproduce not only solvation energies but also other physical properties of solid–liquid interfaces. Continuum approaches alone also necessarily do not capture local variations in the electric field from cations at the interface, which can affect the energetics of intermediates with substantial dipoles or polarizability. Finally, since the double-layer charge can be varied continuously, LPB/PCM models provide a way to determine electrochemical barriers at constant potential. However, double-layer charging and the atomic motion associated with reaction events occur on significantly different timescales. As a result, we suggest that more detailed approaches, such as the modified Poisson–Boltzmann model and/or the addition of a Stern layer, may be able to mitigate some but not all of the challenges discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of double- and triple-layer antireflection coatings on the formation of photocurrents in multijunction III–V solar cells

The results of simulation by the transfer-matrix method of TiO{sub 2}/SiO{sub 2} double-layer and TiO{sub 2}/Si{sub 3}N{sub 4}/SiO{sub 2} triple-layer antireflection coatings for multijunction InGaP/GaAs/Ge heterostructure solar cells are presented. The TiO{sub 2}/SiO{sub 2} double-layer antireflection coating is experimentally developed and optimized. The experimental spectral dependences of the external quantum yield of the InGaP/GaAs/Ge heterostructure solar cell and optical characteristics of antireflection coatings, obtained in the simulation, are used to determine the photogenerated current densities of each subcell in the InGaP/GaAs/Ge solar cell under AM1.5D irradiation conditions (1000 W/m{sup 2}) and for the case of zero reflection loss. It is shown in the simulation that the optimized TiO{sub 2}/Si{sub 3}N{sub 4}/SiO{sub 2} triple-layer antireflection coating provides a 2.3 mA/cm{sup 2} gain in the photocurrent density for the Ge subcell under AM1.5D conditions in comparison with the TiO{sub 2}/SiO{sub 2} double-layer antireflection coating under consideration. This thereby provides an increase in the fill factor of the current–voltage curve and in the output electric power of the multijunction solar cell.

36 MATERIALS SCIENCE↗

Vertically Aligned Carbon Nanotubes Grown on Copper Foil as Electrodes for Electrochemical Double Layer Capacitors

This study reports a binder-free, catalyst-free method for fabricating vertically aligned carbon nanotubes (VACNTs) directly on copper (Cu) foil using plasma-enhanced chemical vapor deposition (PECVD) for electrochemical double-layer capacitor (EDLC) applications. This approach eliminates the need for catalyst layers, polymeric binders, or substrate pre-treatments, simplifying electrode design and enhancing electrical integration. The resulting VACNTs form a dense, uniform, and porous array with strong adhesion to the Cu substrate, minimizing contact resistance and improving conductivity. Electrochemical analysis shows gravimetric specific capacitance (C grav ) and areal specific capacitance (C areal ) of 8 F g −1 and 3.5 mF cm −2 at a scan rate of 5 mV/s, with low equivalent series resistance (3.70 Ω) and charge transfer resistance (0.48 Ω), enabling efficient electron transport and rapid ion diffusion. The electrode demonstrates excellent rate capability and retains 92% of its initial specific capacitance after 3000 charge–discharge cycles, indicating strong cycling stability. These results demonstrate the potential of directly grown VACNT-based electrodes for high-performance EDLCs, particularly in applications requiring rapid charge–discharge cycles and sustained energy delivery.

25 ENERGY STORAGE↗

Models for quasi-periodic electric fields and associated electron precipitation in the auroral zone

Quasi-periodic electric fields observed in the nighttime auroral oval and in the polar cleft had periods of between 0.5 and 3 s and amplitudes from 2 to 30 mV/m and exhibited left-hand and right-hand elliptical polarization. The events in the auroral oval were associated with substorms and visual auroral activity, and the spectral and polarization properties of the observed fields suggest that they represented the electric components of Pc 1 or Pi 1 micropulsations. One possibility is that the micropulsations result from Birkeland current chopping by an unstable double layer located at an altitude of approximately one earth radius. In this interpretation, the double layer is assumed to accelerate the observed electrons, the electron flux variations being due either to the inherent variations of the double layer or to its interaction with the micropulsations.

Petelski, E. F.↗

Double metalization for VLSI

Postsintering process increases yield of double-layer metal conductors to almost 100 percent. When wafers containing double-metalized chips are sintered, metal layers react with oxide film remaining in insulation layer holes, breaking it up so that it no longer impedes electric current. Cooling also mechanically disrupts oxide film.

Trotter, J. D.↗