Search NASA⌕ Search

SEARCH · Search NASA

Results for “electronic components”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Precision circuit calculations in hostile environments.

Sensing and calculating electronic systems with stringent accuracy requirements use internal standard voltages for references. Conceptually, this is related to using some unit measurement for counting any quantity. The high precision electronic components used in systems in the nation’s stockpile also make use of these standard voltages. The need for stable voltage references has been long-standing in the overall electronics industry. For many applications, the most pressing need is for stability of a reference voltage as the circuit temperature varies. Typical circuit components have temperature coefficients for their operational characteristics that are given in some delta per degree centigrade and these coefficients can be either positive or negative. Thus, it is natural to consider building a circuit out of components that have complementary temperature coefficients so that the operating characteristics of the circuit have a net zero temperature coefficient. This is the fundamental basis of precision voltage reference (PVR) circuit operation and it is straightforward to extend this type of stabilization to reduce shifts caused by hostile environment radiation.

42 ENGINEERING↗

Modification Of The Electron Energy Distribution Function During Lithium Experiments On The National Spherical Torus Experiment

The National Spherical Torus Experiment (NSTX) has recently studied the use of a liquid lithium divertor (LLD). Divertor Langmuir probes have also been installed for making measurements of the local plasma conditions. A non-local probe interpretation method is used to supplement the classical probe interpretation and obtain measurements of the electron energy distribution function (EEDF) which show the occurrence of a hot-electron component. Analysis is made of two discharges within a sequence that exhibited changes in plasma fueling efficiency. It is found that the local electron temperature increases and that this increase is most strongly correlated with the energy contained within the hot-electron population. Preliminary interpretative modeling indicates that kinetic effects are likely in the NSTX.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Novamene: A new class of carbon allotropes

We announce a new class of carbon allotropes. The basis of this new classification resides on the concept of combining hexagonal diamond (sp3 bonded carbon - lonsdaleite) and ring carbon (sp2 bonded carbon - graphene). Since hexagonal diamond acts as an insulator and sp2 bonded rings act as conductors, these predicted materials have potential applications for transistors and other electronic components. We describe the structure of a proposed series of carbon allotropes, novamene, and carry out a detailed computational analysis of the structural and electronic properties of the simplest compound in this class: the single-ring novamene. In addition, we suggest how hundreds of different allotropes of carbon could be constructed within this class.

36 MATERIALS SCIENCE↗

Performance of the CMS High Granularity Calorimeter prototype to charged pion beams of 20–300 GeV/c

The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing medium and silicon sensors as an active medium in the regions of high radiation exposure, and scintillator tiles directly read out by silicon photomultipliers in the remaining regions. As part of the development of the detector and its readout electronic components, a section of a silicon-based HGCAL prototype detector along with a section of the CALICE AHCAL prototype was exposed to muons, electrons and charged pions in beam test experiments at the H2 beamline at the CERN SPS in October 2018. The AHCAL uses the same technology as foreseen for the HGCAL but with much finer longitudinal segmentation. The performance of the calorimeters in terms of energy response and resolution, longitudinal and transverse shower profiles is studied using negatively charged pions, and is compared to GEANT4 predictions. This is the first report summarizing results of hadronic showers measured by the HGCAL prototype using beam test data.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Influence of Xe{sub 2}{sup +} ions on the micro-hollow cathode discharge driven by thermionic emission

The influence of Xe{sub 2}{sup +} dimer ions and excited Xe* atoms on the hollow cathode discharge driven by electron thermionic emission is studied using two-dimensional Particle-in-Cell Monte Carlo Collisions modeling. A comparison with the results of two-component (electrons and Xe{sup +} ions) plasma modeling showed that the presence of the Xe{sub 2}{sup +} dimer ions and excited Xe* atoms in the plasma affects the plasma parameters (density, potential, and ion fluxes toward the cathode). The influence of Xe{sub 2}{sup +} ions and Xe* atoms on the plasma sheath parameters, such as thickness and the ion velocity at the sheath edge, is analyzed.

74 ATOMIC AND MOLECULAR PHYSICS↗

Novel In-situ Patterning Technique to Fabricate Single Quantum Dots for Quantum Photonics

Photon sources able to emit single or entangled photon pairs are key components in quantum information systems. Semiconductor quantum dots (QDs) are promising candidates due to their high efficiencies and ease of integration with other photonic or electronic components. State-of-the-art QDs, however, are limited to certain emission wavelengths and specific applications due to material choice constraints and their randomness in shape/size. This project is focused on developing a novel in-situ patterning technique to realize QDs with a broad emission range, shape/size control and the ability to emit single/entangled photons. Our approach has two key elements: (1) In-situ patterning via arsenic-induced nanovoid etching on antimonide surfaces and (2) In-filling of nanovoids to form QDs. By closely controlling the experimental conditions, it is shown that this technique can be used to realize III-V QDs in As 2 - etched nanovoids on a GaSb surface. The exposure to As 2 in terms of substrate temperature, time and flux is found to have a significant impact on the process variables such as nanovoid depth, QD dimensions etc. An in-depth analysis of the etch mechanism reveals that by controlling the As 2 exposure, uniform 3-dimensional nanostructures with varying areal densities can be obtained without an in-filling step. Preliminary optical characterization of these nanostructures shows that these QDs may be relevant for realizing emitters in the telecom wavelength range.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Towards Accelerated Aging Methodologies and Health Management of Power MOSFETs (Technical Brief)

Understanding aging mechanisms of electronic components is of extreme importance in the aerospace domain where they are part of numerous critical subsystems including avionics. In particular, power MOSFETs are of special interest as they are involved in high voltage switching circuits such as drivers for electrical motors. With increased use of electronics in aircraft control, it becomes more important to understand the degradation of these components in aircraft specific environments. In this paper, we present an accelerated aging methodology for power MOSFETs that subject the devices to indirect thermal overstress during high voltage switching. During this accelerated aging process, two major modes of failure were observed - latch-up and die attach degradation. In this paper we present the details of our aging methodology along with details of experiments and analysis of the results.

Celaya, Jose R.↗

Time-resolved study of the extreme-ultraviolet emission and plasma dynamics of a sub-Joule, fast capillary discharge

In this work, we discuss experimental observations on the dynamics of a fast, low energy capillary discharge when operated in argon and its properties as an intense source of extreme-ultraviolet (EUV) radiation. The discharge pre-ionization and self-triggering were accomplished by the use of the hollow cathode effect. This allowed a compact size and low inductance discharge with multi-kA current level and a quarter-period of ∼10 ns at sub-Joule energy level. We used the novel moiré and schlieren diagnostics with a 12 ps laser to obtain the time evolution of the line electron density and to study the plasma dynamics. EUV spectroscopy and filtered diodes were also implemented to estimate the plasma temperature and density throughout the evolution of the discharge. EUV source size was measured by using a filtered slit-wire camera. We observed that EUV emission starts from a compressed plasma on axis during the second quarter-period of the current and continues until the fifth quarter-period. Ionization levels from Ar VII to X were observed. By comparing the EUV emission spectra with synthetic spectra, we found that at the onset of emission (∼7 ns), the plasma is well fitted by a single Maxwellian electron distribution function with T{sub e} ∼ 12 eV and n{sub e} ∼ 10{sup 17 }cm{sup −3}. Close to peak emission (∼13 ns), plasma temperature and density increase to ∼20 eV and n{sub e} ∼ 10{sup 18 }cm{sup −3}, respectively. However, in order to successfully match the experimental data, a two component electron distribution function was necessary. Later in time, a smaller fraction in the high energy component and higher temperature suggests homogenization of the plasma. The moiré and schlieren diagnostics showed multiple radial compression-waves merging on axis throughout the discharge; they are an important heating mechanism that leads to a period of severe turbulence at peak EUV emission. It was also observed that emission ceases when the axial maximum of the electron density collapses.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A POSSIBLE APPROACH TO THREE-DIMENSIONAL COSMIC-RAY PROPAGATION IN THE GALAXY. IV. ELECTRONS AND ELECTRON-INDUCED {gamma}-RAYS

Based on the diffusion-halo model for cosmic-ray (CR) propagation, including stochastic reacceleration due to collisions with hydromagnetic turbulence, we study the behavior of the electron component and the diffuse {gamma}-rays (D{gamma}'s) induced by them. The galactic parameters appearing in these studies are essentially the same as those appearing in the hadronic CR components, while we additionally need information on the interstellar radiation field, taking into account dependences on both the photon energy, E{sub ph}, and the position, r. We compare our numerical results with the data on hadrons, electrons, and D{gamma}'s, including the most recent results from Fermi, which gives two remarkable results: (1) the electron spectrum falls with energy as E{sup -3}{sub e} up to 1 TeV, and does not exhibit prominent spectral features around 500 GeV, in contrast to the dramatic excess appearing in both ATIC and PPB-BETS spectra and (2) the EGRET GeV-excess in the D{gamma} spectrum is neither due to an astronomical origin (much harder CR spectrum in the galactic center) nor a cosmological one (dark matter annihilation or decay), but due to an instrumental problem. In the present paper, however, we focus our interest rather conservatively upon the internal relation between these three components, using common galactic parameters. We find that they are in reasonable harmony with each other within both the theoretical and experimental uncertainties, apart from the electron-anomaly problem, while some enhancement of D{gamma}'s appears in the high galactic latitude with |b|>60{sup 0} in the GeV region.

79 ASTRONOMY AND ASTROPHYSICS↗

Effect of electron flow on the ordinary-extraordinary mode conversion

Ordinary-extraordinary mode conversion in the electron cyclotron frequency range is revisited in the presence of a flowing electron component. The analytical expressions of optimal parallel refraction index and conversion efficiency are obtained from a one-dimensional cold plasma model. The presence of flowing electrons leads to an outward shift of the conversion layer and therefore increases the optimal value of parallel refraction index. If this effect is not considered, the efficiency of mode conversion degenerates. In typical tokamak plasmas, this degeneration is about a few percentages, which may induce the reflection of several tens of kilowatts of power from the cutoff layer when injecting megawatts of ECRF power into fusion plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Investigation of mechanism of anode plasma formation in ion diode with dielectric anode

The results of investigation of the anode plasma formation in a diode with a passive anode in magnetic insulation mode are presented. The experiments have been conducted using the BIPPAB-450 ion accelerator (350–400 kV, 6–8 kA, 80 ns) with a focusing conical diode with B{sub r} external magnetic field (a barrel diode). For analysis of plasma formation at the anode and the distribution of the ions beam energy density, infrared imaging diagnostics (spatial resolution of 1–2 mm) is used. For analysis of the ion beam composition, time-of-flight diagnostics (temporal resolution of 1 ns) were used. Our studies have shown that when the magnetic induction in the A-C gap is much larger than the critical value, the ion beam energy density is close to the one-dimensional Child-Langmuir limit on the entire working surface of the diode. Formation of anode plasma takes place only by the flashover of the dielectric anode surface. In this mode, the ion beam consists primarily of singly ionized carbon ions, and the delay of the start of formation of the anode plasma is 10–15 ns. By reducing the magnetic induction in the A-C gap to a value close to the critical one, the ion beam energy density is 3–6 times higher than that calculated by the one-dimensional Child-Langmuir limit, but the energy density of the ion beam is non-uniform in cross-section. In this mode, the anode plasma formation occurs due to ionization of the anode material with accelerated electrons. In this mode, also, the delay in the start of the formation of the anode plasma is much smaller and the degree of ionization of carbon ions is higher. In all modes occurred effective suppression of the electronic component of the total current, and the diode impedance was 20–30 times higher than the values calculated for the mode without magnetic insulation of the electrons. The divergence of the ion beam was 4.5°–6°.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Use of High Magnetic Field to Control Microstructural Evolution in Metallic and Magnetic Materials

The Amendment 1, referred to as Phase 2, to the original CRADA NFE-06-00414 added tasks 3 through 7 to the original statement of work that had two main tasks that were successfully accomplished in Phase 1 of this project. In this Phase 2 CRADA extension, extensive research and development activities were conducted using high magnetic field processing effects for the purpose of manipulating microstructure in the SAE 5160 steel to refine grain size isothermally and to develop nanocrystalline spacing pearlite during continuous cooling, and to enhance the formability/forgability of the non-ferrous precipitation hardening magnesium alloy AZ90 by applying a high magnetic field during deformation processing to investigate potential magnetoplasticity in this material. Significant experimental issues (especially non-isothermal conditions evolving upon insertion of an isothermal sample in the high magnetic field) were encountered in the isothermal phase transformation reversal experiments (Task 4) that later were determined to be due to various condensed matter physics phenomenon such as the magnetocaloric (MCE) effect that occurs in the vicinity of a materials Curie temperature. Similarly the experimental deformation rig had components for monitoring deformation/strain (Task 3) that were susceptible to the high magnetic field of the ORNL Thermomagnetic Processing facility 9-T superconducting magnet that caused electronic components to fail or record erroneous (very noisy) signals. Limited experiments on developing nanocrystalline spacing pearlite were not sufficient to elucidate the impact of high magnetic field processing on the final pearlite spacing since significant statistical evaluation of many pearlite colonies would need to be done to be conclusive. Since extensive effort was devoted to resolving issues for Tasks 3 and 7, only results for these focused activities are included in this final CRADA report along with those for Task 7 (described in the Objectives Section of this report).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Excitation of the ordinary electromagnetic mode in low-beta plasmas

The excitation of the ordinary mode propagating perpendicular to an external magnetic field in a plasma is discussed for the case where the ratio of the kinetic energy associated with electron motion parallel to the external magnetic field to the energy density of the magnetic field is low. The analysis is performed for plasma in which in addition to the thermal electrons there is a hot anisotropic electron component. Relativistic effects are taken into account in the stability analysis. Both a ring distribution and a loss cone distribution are used to model the hot electron species. For the ring distribution typical growth rates are larger than that for the case of the loss cone distribution. Excitation of the ordinary mode is found at numerous harmonics of the cyclotron frequency for the ring distribution, however, the loss cone distribution is found to give instability primarily at the fundamental harmonic.

Freund, H. P.↗

Wire Scanner Beam Profile Measurements for the LANSCE Facility

The Los Alamos Neutron Science Center (LANSCE) is replacing beam profile measurement systems, commonly known as Wire Scanners (WS). Using the principal of secondary electron emission, the WS measurement system moves a wire or fiber across an impinging particle beam, sampling a projected transverse-beam distribution. Because existing WS actuators and electronic components are either no longer manufactured or home-built with antiquated parts, a new WS beam profile measurement is being designed, fabricated, and tested. The goals for these new WS's include using off-the-shelf components while eliminating antiquated components, providing quick operation while allowing for easy maintainability, and tolerating external radioactivation. The WS measurement system consists of beam line actuators, a cable plant, an electronics processor chassis, and software located both in the electronics chassis (National Instruments LabVIEW) and in the Central Control Room (EPICS-based client software). This WS measurement system will measure Hand H{sup +} LANSCE-facility beams and will also measure less common beams. This paper describes these WS measurement systems.

43 PARTICLE ACCELERATORS↗

Shock-isolation material selection for electronic packages in hard-target environment

High velocity munitions and kinetic penetrators experience monumental external forces, impulses, and accelerations. The hard target environment is immensely taxing on sophisticated electronic components and recorders designed to retrieve valuable data related to the systems performance and characteristics in the periods of flight, impact, and post-impact. Such electronic systems have upper limits of overall shock intensity which, if exceeded, will either shorten the operating life of the parts or risk destruction resulting in loss of both the data and the principal value of the recorder. The focus of this project was to refine the categorization of leading material types for encapsulation and passive shock isolation and implement them in a method useable for a wide variety of environments. Namely, a design methodology capable of being tailored to the specific impact conditions to maximize the lively hood of sensitive electronics and the information recorded. The results of the study concluded that the materials observed under consistent dynamic high strain rate tests, which include Conathane® EN-4/9, Slygard®-184, and Stycast™-2651, behaved well in certain aspects of energy transmission and shock when considering the frequency environment or package coupled with the isolation material’s application. Key points about the implementation of the materials in extreme shock environments is discussed with the connection to energy analysis, loss attributes, and pulse transmissibility modeling. However, attempts to model the materials solely based on energy transmissibility in the frequency domain using only external experimental data and simplified boundary conditions was not found to be consistent with that acquired from the pressure bar experiments. Further work will include the addition of further material experimentation of the encapsulants in other frequency and temperature states, confined and pre-load boundary states, and composite constructions.

36 MATERIALS SCIENCE↗

Analytical calculation of degree of linear polarization of the H{sub {alpha}}and H{sub {beta}}lines in hydrogen-containing ionized gas

The degrees of linear polarization of the H{sub {alpha}}and H{sub {beta}}lines in an ionized gas are calculated analytically, and the inverse problem of spectropolarimetry is resolved. The parameters of an anisotropic electron distribution in a hydrogen-containing plasma are determined. The dependences of the degree of linear polarization on the parameters of the electron component in an ionized gas are analyzed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Digibase Performance Over Time

All NaI detectors and electronic components drift over time; however, in well-behaved systems, this drift should be less than 5 keV. We’ve documented a method to determine if the electronics or detector is damaged and how to mitigate shifts due to applying voltage.

42 ENGINEERING↗

Reliability Effects of Surge Current Testing of Solid Tantalum Capacitors

Solid tantalum capacitors are widely used in space applications to filter low-frequency ripple currents in power supply circuits and stabilize DC voltages in the system. Tantalum capacitors manufactured per military specifications (MIL-PRF-55365) are established reliability components and have less than 0.001% of failures per 1000 hours (the failure rate is less than 10 FIT) for grades D or S, thus positioning these parts among electronic components with the highest reliability characteristics. Still, failures of tantalum capacitors do happen and when it occurs it might have catastrophic consequences for the system. This is due to a short-circuit failure mode, which might be damaging to a power supply, and also to the capability of tantalum capacitors with manganese cathodes to self-ignite when a failure occurs in low-impedance applications. During such a failure, a substantial amount of energy is released by exothermic reaction of the tantalum pellet with oxygen generated by the overheated manganese oxide cathode, resulting not only in destruction of the part, but also in damage of the board and surrounding components. A specific feature of tantalum capacitors, compared to ceramic parts, is a relatively large value of capacitance, which in contemporary low-size chip capacitors reaches dozens and hundreds of microfarads. This might result in so-called surge current or turn-on failures in the parts when the board is first powered up. Such a failure, which is considered as the most prevalent type of failures in tantalum capacitors [I], is due to fast changes of the voltage in the circuit, dV/dt, producing high surge current spikes, I(sub sp) = Cx(dV/dt), when current in the circuit is unrestricted. These spikes can reach hundreds of amperes and cause catastrophic failures in the system. The mechanism of surge current failures has not been understood completely yet, and different hypotheses were discussed in relevant literature. These include a sustained scintillation breakdown model [1-3]; electrical oscillations in circuits with a relatively high inductance [4-6]; local overheating of the cathode [5,7, 8]; mechanical damage to tantalum pentoxide dielectric caused by the impact of MnO2 crystals [2,9, 10]; or stress-induced-generation of electron traps caused by electromagnetic forces developed during current spikes [11]. A commonly accepted explanation of the surge current failures is that at unlimited current supply during surge current conditions, the self-healing mechanism in tantalum capacitors does not work, and what would be a minor scintillation spike if the current were limited, becomes a catastrophic failure of the part [l, 12]. However, our data show that the scintillation breakdown voltages are significantly greater that the surge current breakdown voltages, so it is still not clear why the part, which has no scintillations, would fail at the same voltage during surge current testing (SCT).

Teverovsky, Alexander↗