Search NASA⌕ Search

SEARCH · Search NASA

Results for “flow pattern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Substorm effects on the plasma sheet ion composition on March 22, 1979 (CDAW 6)

One of the potentially most useful aspects of mass spectroscopy in magnetospheric research is related to the ability to distinguish between ions of solar wind and terrestrial origins. Knowing the source of the plasmas in various regions and under various geomagnetic conditions is crucial in improving the understanding of particle flows in the magnetosphere. Sharp et al. (1982) found that the plasma sheet ions in the 0.1- to 16-keV/e range, were predominantly of solar wind origin during low geomagnetic activity, while there was a large terrestrial component during active times. This paper presents a set of data from March 22, 1979. The reported investigation represents the first detailed case study of the relation between geomagnetic substorm activity and the ion composition in the plasma sheet. A decrease in solar wind ion flow at ISEE 1 and the subsequent increase in the flow of ionospheric ions is interpreted as evidence of a fundamental change in the particle flow pattern following the start of substorm activity.

Lennartsson, W.↗

Turbulence structures associated with the bursting event

Turbulence structures in a wall bounded shear layer during the bursting event detected by a conditional sampling technique are investigated using data obtained from large eddy simulation of turbulent channel flow. Streamlines are constructed from the ensemble-averaged velocity field to illustrate the flow patterns associated with the bursting event. The splatting motions during the sweep event and the existence of a pair of counterrotating streamwise vortices during the ejection process are exhibited.

Kim, J.↗

Conical similarity of shock/boundary-layer interactions generated by swept and unswept fins

A parametric experimental investigation has been made of the class of three-dimensional shock wave/turbulent boundary layer interactions generated by swept and unswept leading-edge fins. The fin sweepback angles were 0-65 deg at 5, 9, and 15 deg angles of attack. Two equilibrium two-dimensional turbulent boundary layers with a freestream Mach number of 2.95 and a Reynolds number of 6.3 x 10 to the 7th/m were used as incoming flow conditions. All of the resulting interactions were found to possess conical symmetry of the surface flow patterns and pressures outside of an initial inception zone. Further, these interactions were found to obey a simple conical similarity rule based on inviscid shock wave strength, irrespective of fin sweepback or angle of attack. This is one of the first demonstrations of similarity among three-dimensional interactions produced by geometrically dissimilar shock generators.

Settles, G. S.↗

Space Shuttle ice prevention studies

Turbojet engine exhausts are being considered for the prevention of ice formation on the Space Shuttle External Tank (ET) when cryogenic propellants are loaded. The ice could dislodge and damage the Thermal Protection System tiles of the Shuttle Orbiter. An oil flow visualization technique was developed to quickly and inexpensively study the flowfields created by jet exhausts. The procedure can also determine the influence of geometry, jet exhausts, and wind conditions on the size and location of flow regions. A black tempra and kerosene mixture was applied to an ET model; the wind tunnel and jet flow were started; and when they stopped the flow patterns were photographed to determine which parameters had the greatest influence on the flowfields.

Porteiro, J. L. F.↗

The Influence of Low Frequency Mechanical Vibrations on the Growth of Single Crystals

The optimum conditions for crystal growth are usually achieved either by suppressing convective fluid flows (e.g., by the use of a low-gravity environment) or by over-riding thermal and solutal convection by the use of a strong stirring action. A novel stirring technique has been developed which involves subjecting a vertical crucible to a circle in a horizontal plane (without rotation). Use of an amplitude of 3 mm at a frequency of approx 6 Hz produced complete mixing of a non-uniform aqueous liquid in a few seconds. The mixing action involved the downward flow of liquid in the outer annulus of the liquid, driven by surface waves. When the downward flowing liquid reaches the bottom of the crucible, it is reflected in a central, upward flowing spiral. This flow pattern should be beneficial for crystal growth by the Bridgman method since it will sweep impurities away from the walls and produce a more convex solid-liquid interface. Initial attempts to apply the new stirring technique to CdTe crystal growth did not show significant improvement in the number of crystals nucleated, but the interface shape appeared to be close to that predicted.

Feigelson, R. S.↗

Modeling of convection phenomena in Bridgman-Stockbarger crystal growth

Thermal convection phenomena in a vertically oriented Bridgman-Stockbarger apparatus were modeled by computer simulations for different gravity conditions, ranging from earth conditions to extremely low gravity, approximate space conditions. The modeling results were obtained by the application of a state-of-the art, transient, multi-dimensional, completely densimetrically coupled, discrete-element computational model which was specifically developed for the simulation of flow, temperature, and species concentration conditions in two-phase (solid-liquid) systems. The computational model was applied to the simulation of the flow and the thermal conditions associated with the convection phenomena in a modified Germanium-Silicon charge enclosed in a stationary fused-silica ampoule. The results clearly indicated that the gravitational field strength influences the characteristics of the coherent vortical flow patterns, interface shape and position, maximum melt velocity, and interfacial normal temperature gradient.

Carlson, F. M.↗

A two-dimensional numerical study of the flow inside the combustion chambers of a motored rotary engine

A numerical study was performed to investigate the unsteady, multidimensional flow inside the combustion chambers of an idealized, two-dimensional, rotary engine under motored conditions. The numerical study was based on the time-dependent, two-dimensional, density-weighted, ensemble-averaged conservation equations of mass, species, momentum, and total energy valid for two-component ideal gas mixtures. The ensemble-averaged conservation equations were closed by a K-epsilon model of turbulence. This K-epsilon model of turbulence was modified to account for some of the effects of compressibility, streamline curvature, low-Reynolds number, and preferential stress dissipation. Numerical solutions to the conservation equations were obtained by the highly efficient implicit-factored method of Beam and Warming. The grid system needed to obtain solutions were generated by an algebraic grid generation technique based on transfinite interpolation. Results of the numerical study are presented in graphical form illustrating the flow patterns during intake, compression, gaseous fuel injection, expansion, and exhaust.

Shih, T. I. P.↗

Investigation of the dayside boundary region of the magnetosphere

The region near the dayside boundary of the magnetosphere is of particular interest mainly because it is the most likely site for solar wind energy transfer. Exactly where and how this transfer occurs is one of the basic problems of magnetospheric physics. The global nature of the energy transfer is addressed in this research. In order to test whether energy transfer affects the large scale plasma flow in the magnetosheath, global properties of the magnetosheath were analyzed and compared to models with no energy transfer. Also, global models of merging sites on the magnetopause were modeled with the aid of the magnetosheath models. Since energy transfer and intrinsic magnetosheath properties depend upon the orientation of the interplanetary magnetic field (IMF), it was essential to have an IMF monitor for these studies. In the course of using ISEE 3 in this role, statistical studies were performed to test the accuracy of using data from an orbit so far upstream. Global properties of the magnetosheath energetic ion population, magnetic field strength and orientation, and flow pattern, determined with ISEE data are summarized.

Crooker, N.↗

Discovery of meteorites on a blue-ice field near the Frontier Mountains, North Victoria Land, Antarctica

A high concentration of meteorites were discovered on a blue ice field northeast of the Frontier Mountains. As a result of a systematic search, a total of 42 meteorites were recovered. The current glacial situation has evolved through various stages, which are discussed in relationship to the concentration of meteorites. Ice flow patterns are summarized. The chemical composition and terrestrial ages of the meteorites are discussed.

Delisle, G.↗

Entrainment, transport and concentration of meteorites in polar ice sheets

Glaciers and ice sheets act as slow-moving conveyancing systems for material added to both their upper and lower surfaces. Because the transit time for most materials is extremely long the ice acts as a major global storage facility. The effects of horizontal and vertical motions on the flow patterns of Antarctic ice sheets are summarized. The determination of the source areas of meteorites and their transport paths is a problem of central importance since it relates not only directly to concentration mechanisms but also to the wider issues in glaciology and meteorites. The ice and snow into which a meteorite falls, and which moves with it to the concentration area, encodes information about the infall area. The principle environmental conditions being former elevation, temperature (also related to elevation), and age of the ice. This encoded information could be used to identify the infall area.

Drewry, D. J.↗

The physics of thermal instability in two dimensions

Previous studies of a thermal (radiative) instability in a sheared magnetic field have shown that, under solar coronal conditions, cool condensations can form in a small neighborhood about the shear layer. Such results have served to model the formation of solar filaments (or prominences) observed to occur above photospheric magnetic polarity-inversion lines. A surprising conclusion of these studies is that the width of the condensation does not depend on the thermal conductivity. By examining the mass-flow patterns of two-dimensional condensations in the absence of thermal conduction, it is demonstrated that local plasma dynamics and the constraints imposed by boundary conditions are together sufficient to explain the size of the condensation width. In addition the results of a series of numerical calculations are presented which illustrate the characteristic mode structure of sheared-field condensations.

Sparks, L.↗

Cosmic-ray acceleration at stellar wind terminal shocks

Steady-state spherically symmetric analytic solutions of the cosmic-ray transport equations, applicable to the problem of acceleration of cosmic rays at the terminal shock to a stellar wind, are studied. The spectra, graidents, and flow patterns of particles modulated and accelerated by the stellar wind and shock are investigated by means of monoenergetic-source solutions at finite radius, as well as solutions with monoenergetic and power-law galactic spectra. On the basis of calculations given, early-type stars could supply a significant fraction of the 3 x 10 to the 40th ergs/sec required by galactic cosmic rays.

Webb, G. M.↗

Neutral parcel transport in the high latitude F-region

The NCAR Thermospheric General Circulation model (TGCM) is used together with a 'post-processor' diagnostic package to analyze neutral parcel transport in the high latitude F-region. The diagnostic package includes a feature that enables individual parcels of neutral gas to be tracked by interpolation through the TGCM model grid in time and space. Various trajectories have been calculated to illustrate the predicted loci of neutral gas parcels that encounter large ion-drag forces due to the ionospheric mapping of the magnetospheric convection electric field. The trajectories, calculated for a 'steady state', diurnally reproducible run of the TGCM, show that the cusp region plays an exceedingly important regulatory or nozzle role for the overall flow pattern and has great influence on the energization of the F-region polar cap. In particular, it is found that the trajectory of a 'typical' F-region neutral gas parcel passes through the cusp region at least once and sometimes twice in a 24 hour period due to the convergent geometry of the ion convection pattern.

Killeen, T. L.↗

An auroral arc in the late evening plasma flow reversal

The late evening plasma flow reversal over Alaska on January 27, 1980 and changes associated with an auroral arc are examined on the basis of radar observations and rocket measurements. In particular, attention is given to changes in the plasma flow patterns resulting from a small substorm and to several effects associated with the auroral arc, such as an inverted V electron energy spectrum and, on the equatorial edge, an intense burst of auroral hiss and a very thin sheet of field-aligned electrons. Details of the experimental payload and geophysical conditions of the launch are included.

Cahill, L. J., Jr.↗

Convection in the vertical midplane of a horizontal cylinder Comparison of two-dimensional approximations with three-dimensional results

Experimental results and numerical data on the flow characteristics of core-driven and boundary-layer-driven regimes (CDRs) and (BLDRs) are compared to two-dimensional solutions for heated convective flow in the vertical midplane of a horizontal cylinder. The data were obtained from laser Doppler velocimetry (LDA) measurements and from three-dimensional numerical solutions. It is shown that the approximate solutions gave the correct Rayleigh-number-dependences and distributions for the velocities in the CDR and BLDR regimes. However, the transition between the CDR and the BLDR, as well as the magnitude of the distribution of velocity components, were found to be dependent on the type of two-dimensional approximation selected. In the case of CDR, core velocities were overestimated by as much as 30 percent by the two-dimensional approximations; and in the case of BLDR, the core velocities were overestimated by 40-50 percent as compared to the measured velocities. A schematic illustration of the flow patterns in the cylinder is provided.

Bontoux, P.↗

Numerical solution of the separating flow due to an obstruction

The steady separated flow due to an obstruction in a two-dimensional channel is studied through the numerical solution of the Navier-Stokes equations using finite difference techniques. The characteristics of the separated flow behind the obstruction are obtained up to a Reynolds number of 1500. The flow patterns, vorticity contours and total pressure contours are presented. The effects of Reynolds number, height of obstruction, thickness of obstruction and the inlet velocity profile are investigated.

Nallasamy, M.↗

Magnetic shear. IV - Hale regions 16740, 16815, and 16850

Dopplergrams made in C IV 1548 A are studied for evidence of velocity shear near H-alpha dark filaments and for large-scale flow convergent on active regions. The three regions studied support earlier conclusions that shear is a common property of active regions and that active regions may be the foci of converging plasma flow. Flow patterns near filaments show divergence or convergence as well as shear. Also the sense of the shear can be either cyclonic or anticyclonic. No preference is noted for convergence or divergence or for a particular sense of shear, and there appears to be no correlation between the sense of the shear and the sign of the velocity gradient normal to the filament. The close association of H-alpha dark filaments with shear lines leads to the suggestion that the filaments may arise from a cooling instability induced by the Bernoulli effect.

Athay, R. G.↗

Heat transfer in shrouded rectangular cavities

Heat transfer with turbulent flow over shrouded rectangular cavities are numerically investigated. The geometry studied models flow through the clearance gap at the grooved tip of an axial turbine blade, where the blade rotates in close proximity to a stationary outer ring or shroud. The direction of relative shroud motion is always in opposition to the direction of the gas flow across the blade tip. Heat transfer characteristics and flow pattern in a cavity are found to be strongly influenced by the dimension of gap clearance, cavity geometry, and relative shroud movement.

Chyu, M. K.↗