Search NASA⌕ Search

SEARCH · Search NASA

Results for “formulation systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

On-orbit propulsion requirements and performance assessment of ion propulsion subsystems for future GEO large satellite missions

It is pointed out that a large class of future spacecraft, referred to as large space structures (LSS), will require advanced stationkeeping thrust subsystems. The present investigation is concerned with the performance requirements of such advanced stationkeeping thrust subsystems. An analytical model is employed to evaluate the sensitivity of the total stationkeeping thrust-system mass, for geosynchronous spacecraft, to variations in the mission parameters and thrust-system performance, taking into account ion propulsion thrust systems. The model is formulated for geosynchronous missions and considers only the N-S orbit perturbations due to sun-moon forces and the E-W orbit perturbations due to solar pressure, since these are the dominant orbit perturbations of LSS missions. The thrust system is scaled in relation to the performance capabilities of the existing 8- and 30-cm diameter ion-thruster technology and consists of separate N-S and E-W thrusters.

Wessel, F. J.↗

Modeling the cooldown of cryocooler conduction-cooled devices

Cryocooler conduction cooled devices can experience significant cooldown time due to lower available cooling capacity compares to convection cooled devices. Therefore, the cooldown time is an important design parameter for conduction cooled devices. This article introduces a framework developed in Python for calculating the cooldown profiles and cooldown time of cryocooler conduction-cooled devices such as superconducting magnets and accelerator cavities. The cooldown time estimation problem is essentially a system of ordinary first-order differential equations comprising the material properties (temperature dependent thermal conductivity and specific heat capacity) of the components intertwined with the prevailing heat transfer channels (conduction, radiation, and heat flow across pressed contacts) and the cryocooler capacity. The formulation of this ODE system is first presented. This ODE system is then solved using the in-built Python library odeint. A case study is presented comprising a small cryocooler conduction-cooled copper stabilized niobium-titanium magnet. The case study is supplemented with the Python script enabling the reader to simply tweak the device design parameters and optimize the design from the point of view of slow/fast cooldown.

43 PARTICLE ACCELERATORS↗

NIBBS-Search for Fast and Accurate Prediction of Phenotype-Biased Metabolic Systems

Understanding of genotype-phenotype associations is important not only for furthering our knowledge on internal cellular processes, but also essential for providing the foundation necessary for genetic engineering of microorganisms for industrial use (e.g., production of bioenergy or biofuels). However, genotype-phenotype associations alone do not provide enough information to alter an organism’s genome to either suppress or exhibit a phenotype. It is important to look at the phenotype-related genes in the context of the genome-scale network to understand how the genes interact with other genes in the organism. Identification of metabolic subsystems involved in the expression of the phenotype is one way of placing the phenotype-related genes in the context of the entire network. A metabolic system refers to a metabolic network subgraph; nodes are compounds and edges labels are the enzymes that catalyze the reaction. The metabolic subsystem could be part of a single metabolic pathway or span parts of multiple pathways. Arguably, comparative genome-scale metabolic network analysis is a promising strategy to identify these phenotype-related metabolic subsystems. Network Instance-Based Biased Subgraph Search (NIBBS) is a graph-theoretic method for genome-scale metabolic network comparative analysis that can identify metabolic systems that are statistically biased toward phenotypeexpressing organismal networks. We set up experiments with target phenotypes like hydrogen production, TCA expression, and acid-tolerance. We show via extensive literature search that some of the resulting metabolic subsystems are indeed phenotype-related and formulate hypotheses for other systems in terms of their role in phenotype expression. NIBBS is also orders of magnitude faster than MULE, one of the most efficient maximal frequent subgraph mining algorithms that could be adjusted for this problem. Also, the set of phenotype-biased metabolic systems output by NIBBS comes very close to the set of phenotype-biased subgraphs output by an exact maximally-biased subgraph enumeration algorithm ( MBS-Enum ). The code (NIBBS and the module to visualize the identified subsystems) is available at http:// freescience.org/cs/NIBBS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Performance Improvement of the Linear System Solver for CMFD Acceleration in PROTEUS-MOC

The PROTEUS code developed under the DOE NEAMS program is a high-fidelity capable whole core transports solver based on unstructured finite element meshes [1]. PROTEUS includes three distinct transport solvers: SN, MOC and NODAL. Among them, the PROTEUS-MOC is the 3D method of characteristics (MOC) solver for extruded geometries. In order to accelerate the convergence of 3D MOC calculation, the CMFD acceleration method was implemented in PROTEUS-MOC [2]. For solving the CMFD linear system, the unpreconditioned GMRES algorithm was used in the previous work [3, 4] for implementing the CMFD scheme because of low computation cost of coarse mesh calculations. In the performance tests, we found that the overhead of the CMFD acceleration became non-negligible as the condition number of the CMFD linear system and the size of problem increase. This indicated that the CMFD overhead should be reduced in the preconditioning technique in order to improve the computational performance. In this work, the performance of CMFD acceleration was notably improved by developing and implementing the new formulation of CMFD linear system and preconditioning technique.

Jung, Yeon Sang↗

Zigzag search for multi-objective optimization considering generation cost and emission

The zigzag search algorithm has been applied in engineering fields, such as oil well placement, with satisfactory results. Here, the zigzag search algorithm is introduced, modified with enhancement, and effectively applied to solve an economic emission dispatch problem and to demonstrate its practicability in power systems. The problem is formulated as a non-linear multi-objective optimization model taking energy constraints, generation limits, and transmission constraints into consideration. A set of non-dominant solutions can be obtained to form the Pareto front. Case studies are carried out with the IEEE 30-bus system and IEEE 118-bus system. The results indicate that the proposed zigzag search algorithms have the ability to deal with relevant power system problems. Comparisons are made with algorithms which have been widely used in literatures, such as the genetic algorithm (GA) and particle swarm optimization (PSO). Finally, this demonstrates that the zigzag search is easy to implement and is superior to other multi-objective (MO) techniques in both accuracy and efficiency.

54 ENVIRONMENTAL SCIENCES↗

A New Mechanistic Model of Nucleation Site Density

The two-fluid model, which is a macroscopic formulation of nucleate boiling systems, still makes use of experimental data or empirical correlations for closure models. The use of empirical correlations outside the range of conditions where they have been developed is questionable, which limits the application of the two-fluid model in the design of new boiling systems. This paper proposes a mechanistic model of nucleation site density, which, along with bubble departure frequency and bubble departure diameter, are key factors in the accurate prediction of evaporation heat flux and vapor generation rate on the heated surface in the two-fluid model formulation. Nucleation originates from cavities on boiling surface. Griffith and Wallis proposed that a nucleation site becomes active when vapor is entrapped inside the cavity and the mouth radius is larger than the minimum cavity size corresponding to the wall superheat. Yang and Kim obtained the probability density function of the cavity mouth radius and the half cone angle through a statistical treatment based on the measured cavities by a scanning electron microscope and a differential interference contrast microscope. Hibiki and Ishii modified the distribution profiles of the size and cone angle of cavities present on the heater surface and proposed a new model which is valid over rather wide range of flow conditions. The existing nucleation site density models are not physically consistent at onset of nucleation, where no boiling occurs even though the models predict a high nucleation site density. The new model developed in this paper took into account the non-uniform temperature in liquid near the wall, which allows one to physically impart the onset of nucleation into the nucleation site density model. The new model was parametrically tested and showed physical consistency at the region near onset of nucleate boiling. The new model was also validated against selected experimental data and good agreement was reached.

42 ENGINEERING↗

A Solar-assisted Voltage Optimization Method for Transmission Solar Network Power System

This paper proposes a new formulation and solution algorithm that uses transmission level solar inverters to address the security-constrained optimal power flow (SCOPF) problem. The goal is to stabilize voltage fluctuations in transmission networks in base case and contingency scenarios, by using bulk solar power plant with a minimal number of post-contingency corrections. To achieve this goal, a two-stage volt/var optimization method is proposed to first correct all voltage violations with the volt-var alternating current optimal power flow (ACOPF) algorithm for a base case. Then a linearized SCOPF volt-var control algorithm is proposed to identify the corrective actions for all potential voltage violations in all contingency scenarios. The proposed method was tested and validated on a modified IEEE 118-bus system with solar photovoltaic (PV) data.

Photovoltaic, Volt/Var Control↗

Response and characteristics of structures subjected to S-H waves

A study of the dynamic characteristics of a coupled translational-rotational system is given. The formulation of the problem considers the soil-structure interaction effects by utilizing the impedance functions at the foundation of a structure. Due to the fact that the coefficient matrix in the characteristic equation is frequency dependent in nature, iterations have to be performed to find the nature frequencies of the system. Examples and discussions are presented. Comparisons of the analytical results from various approaches are also given.

Wu, S. T.↗

N=2 supersymmetric extension of a hydrodynamic system in Riemann invariants

In this paper, we formulate an N=2 supersymmetric extension of a hydrodynamic-type system involving Riemann invariants. The supersymmetric version is constructed by means of a superspace and superfield formalism, using bosonic superfields, and consists of a system of partial differential equations involving both bosonic and fermionic variables. We make use of group-theoretical methods in order to analyze the extended model algebraically. Specifically, we calculate a Lie superalgebra of symmetries of our supersymmetric model and make use of a general classification method to classify the one-dimensional subalgebras into conjugacy classes. As a result we obtain a set of 401 one-dimensional nonequivalent subalgebras. For selected subalgebras, we use the symmetry reduction method applied to Grassmann-valued equations in order to determine analytic exact solutions of our supersymmetric model. These solutions include traveling waves, bumps, kinks, double-periodic solutions, and solutions involving exponentials and radicals.

97 MATHEMATICS AND COMPUTING↗

A Revisit to the Notation of Martensitic Crystallography

As one of the most successful crystallographic theories for phase transformations, martensitic crystallography has been widely applied in understanding and predicting the microstructural features associated with structural phase transformations. In a narrow sense, it was initially developed based on the concepts of lattice correspondence and invariant plane strain condition, which is formulated in a continuum form through linear algebra. However, the scope of martensitic crystallography has since been extended; for example, group theory and graph theory have been introduced to capture the crystallographic phenomena originating from lattice discreteness. In order to establish a general and rigorous theoretical framework, we suggest a new notation system for martensitic crystallography. The new notation system combines the original formulation of martensitic crystallography and Dirac notation, which provides a concise and flexible way to understand the crystallographic nature of martensitic transformations with a potential extensionality. A number of key results in martensitic crystallography are reexamined and generalized through the new notation.

36 MATERIALS SCIENCE↗

Dynamic analysis of fully constrained Cable-Driven Parallel Robots for automated prefabricated component installation

This paper presents a dynamic analysis and validation framework to assess a fully constrained six-anchor Cable-Driven Parallel Robot (CDPR) for automated installation of prefabricated facade components. Compared with conventional eight-anchor systems, the six-anchor configuration simplifies setup and reduces cost, but it also reduces control authority, shrinks the wrench-feasible workspace, and tightens orientation limits. Consequently, it is unclear a priori whether dynamically feasible trajectories exist to move the end effector from pickup to the facade. A constrained trajectory optimization is formulated to enforce the system dynamics, cable-tension bounds, and pose/velocity limits, and the framework is evaluated in simulation at three levels: (i) an idealized reference model, (ii) a lab-scale prototype model incorporating measured anchor misalignments and identified damping, and (iii) a full-scale three-story building model with load decomposition for structural feasibility checks. Across these scenarios, the analysis shows that optimal, constraint-satisfying trajectories exist that move the end effector from pickup to installation while maintaining a near-plumb, level orientation at the final pose. Collectively, this multi-scale dynamic analysis and validation framework supports the deployment readiness of the six-anchor CDPR and provides a prototype-based sensitivity case study of how measured anchor placement deviations affect feasibility.

CDPR↗

A Hybrid Multiscale Framework for Subsurface Flow and Transport Simulations

Extensive research efforts have been invested in reducing model errors to improve the predictive ability of biogeochemical earth and environmental system simulators, with applications ranging from contaminant transport and remediation to impacts of biogeochemical elemental cycling (e.g., carbon and nitrogen) on local ecosystems and regional to global climate. While the bulk of this research has focused on improving model parameterizations in the face of observational limitations, the more challenging type of model error/uncertainty to identify and quantify is model structural error which arises from incorrect mathematical representations of (or failure to consider) important physical, chemical, or biological processes, properties, or system states in model formulations. While improved process understanding can be achieved through scientific study, such understanding is usually developed at small scales. Process-based numerical models are typically designed for a particular characteristic length and time scale. For application-relevant scales, it is generally necessary to introduce approximations and empirical parameterizations to describe complex systems or processes. This single-scale approach has been the best available to date because of limited understanding of process coupling combined with practical limitations on system characterization and computation. While computational power is increasing significantly and our understanding of biological and environmental processes at fundamental scales is accelerating, using this information to advance our knowledge of the larger system behavior requires the development of multiscale simulators. Accordingly there has been much recent interest in novel multiscale methods in which microscale and macroscale models are explicitly coupled in a single hybrid multiscale simulation. A limited number of hybrid multiscale simulations have been developed for biogeochemical earth systems, but they mostly utilize application-specific and sometimes ad-hoc approaches for model coupling. We are developing a generalized approach to hierarchical model coupling designed for high-performance computational systems, based on the Swift computing workflow framework. In this presentation we will describe the generalized approach and provide two use cases: 1) simulation of a mixing-controlled biogeochemical reaction coupling pore- and continuum-scale models, and 2) simulation of biogeochemical impacts of groundwater – river water interactions coupling fine- and coarse-grid model representations. This generalized framework can be customized for use with any pair of linked models (microscale and macroscale) with minimal intrusiveness to the at-scale simulators. It combines a set of python scripts with the Swift workflow environment to execute a complex multiscale simulation utilizing an approach similar to the well-known Heterogeneous Multiscale Method. User customization is facilitated through user-provided input and output file templates and processing function scripts, and execution within a high-performance computing environment is handled by Swift, such that minimal to no user modification of at-scale codes is required.

54 ENVIRONMENTAL SCIENCES↗

Heat Exchangers Circuitry Optimization using Low-GWP Refrigerants in Reversible Heat Pump Applications

Tube-fin heat exchangers (TFHX) are widely used in heat pump applications. Circuitry optimization can improve system performance. Previous optimizations focus on improving component-level performance under a specific operating condition, i.e., the TFHX either works as a condenser or an evaporator. The optimal circuitry obtained under air conditioning (AC) mode cannot guarantee optimal performance when used in heat pump (HP) mode. This study implements a bi-objective formulation to achieve optimal system performance in both AC and HP modes. An integer permutation-based Genetic Algorithm is integrated with Heat Pump Design Model (HPDM) to perform heat pump optimization. Six refrigerants, i.e., R410A, R452B, R454B, R32, D2Y60 and L41a are investigated. Case studies show that optimal heat exchangers yield 2.1%-6.1% EER improvement under AC mode and 1.9%-8.5% COP improvement under HP mode. Use of this design approach can help assure a preferable performance of reversible heat pumps during both cooling and heating mode usage.

Li, Zhenning↗

Analysis of a New Implicit Solver for a Semiconductor Model

Here, we present and analyze a new iterative solver for implicit discretizations of a simplified Boltzmann--Poisson system. The algorithm builds on recent work that incorporated a sweeping algorithm for the Vlasov--Poisson equations as part of nested inner-outer iterative solvers for the Boltzmann--Poisson equations. The new method eliminates the need for nesting and requires only one transport sweep per iteration. It arises as a new fixed-point formulation of the discretized system which we prove to be contractive for a given electric potential. We also derive an accelerator to improve the convergence rate for systems in the drift-diffusion regime. We numerically compare the efficiency of the new solver, with and without acceleration, against a recently developed nested iterative solver.

97 MATHEMATICS AND COMPUTING↗

ATTDES: An Expert System for Satellite Attitude Determination and Control

The design, analysis, and flight operations of satellite attitude determintion and attitude control systems require extensive mathematical formulations, optimization studies, and computer simulation. This is best done by an analyst with extensive education and experience. The development of programs such as ATTDES permit the use of advanced techniques by those with less experience. Typical tasks include the mission analysis to select stabilization and damping schemes, attitude determination sensors and algorithms, and control system designs to meet program requirements. ATTDES is a system that includes all of these activities, including high fidelity orbit environment models that can be used for preliminary analysis, parameter selection, stabilization schemes, the development of estimators covariance analyses, and optimization, and can support ongoing orbit activities. The modification of existing simulations to model new configurations for these purposes can be an expensive, time consuming activity that becomes a pacing item in the development and operation of such new systems. The use of an integrated tool such as ATTDES significantly reduces the effort and time required for these tasks.

Mackison, Donald L.↗

Development of an integrated model for energy systems planning and carbon dioxide mitigation under uncertainty – Tradeoffs between two-level decision makers

Highlights: • A bi-level model is developed for energy systems planning and carbon dioxide mitigation. • Tradeoffs between two-level decision-makers’ demands are quantified under uncertainty. • The energy and environmental impact of CO{sub 2} mitigation policy is analyzed for Beijing. • Results provide a range of decision alternatives between system optimality and reliability. A bi-level fuzzy programming (BFLP) method was developed for energy systems planning (ESP) and carbon dioxide (CO{sub 2}) mitigation under uncertainty. BFLP could handle fuzzy information and leader-follower problem in decision-making processes. It could also address the tradeoffs among different decision makers in two decision-making levels through prioritizing the most important goal. Then, a BFLP-ESP model was formulated for planning energy system of Beijing, in which the upper-level objective is to minimize CO{sub 2} emission and the lower-level objective is to minimize the system cost. Results provided a range of decision alternatives that corresponded to a tradeoff between system optimality and reliability under uncertainty. Compared to the single-level model with a target to minimize system cost, the amounts of pollutant/CO{sub 2} emissions from BFLP-ESP were reduced since the study system would prefer more clean energies (i.e. natural gas, LPG and electricity) to replace coal fuel. Decision alternatives from BFLP were more beneficial for supporting Beijing to adjust its energy mix and enact its emission-abatement policy. Results also revealed that the low-carbon policy for power plants (e.g., shutting down all coal-fired power plants) could lead to a potentially increment of imported energy for Beijing, which would increase the risk of energy shortage. The findings could help decision makers analyze the interactions between different stakeholders in ESP and provide useful information for policy design under uncertainty.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

High Waste Loading Glass Formulation Development for High-Zr HLW

This report describes work performed to develop and test new glass and feed formulations in order to increase waste loadings and glass melting rates for Hanford HLW with high concentrations of zirconium. Testing was designed to identify glass and melter feed formulations that optimize waste loading and waste processing rate while meeting all processing and product quality requirements. The work included preparation and characterization of crucible melts to evaluate the effects of waste loading on glass properties and the maximum waste loadings that can be achieved. The testing included an assessment of melt rate using a Vertical Gradient Furnace (VGF) system to develop new formulations with both high waste loadings and high melt rates. The results from crucible-scale testing supported subsequent DM100 tests designed to further assess the enhanced glass and feed formulations with respect to processing rate and product quality.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Exploring Mission Concepts with the JPL Innovation Foundry A-Team

The JPL Innovation Foundry has established a new approach for exploring, developing, and evaluating early concepts called the A-Team. The A-Team combines innovative collaborative methods with subject matter expertise and analysis tools to help mature mission concepts. Science, implementation, and programmatic elements are all considered during an A-Team study. Methods are grouped by Concept Maturity Level (CML), from 1 through 3, including idea generation and capture (CML 1), initial feasibility assessment (CML 2), and trade space exploration (CML 3). Methods used for each CML are presented, and the key team roles are described from two points of view: innovative methods and technical expertise. A-Team roles for providing innovative methods include the facilitator, study lead, and assistant study lead. A-Team roles for providing technical expertise include the architect, lead systems engineer, and integration engineer. In addition to these key roles, each A-Team study is uniquely staffed to match the study topic and scope including subject matter experts, scientists, technologists, flight and instrument systems engineers, and program managers as needed. Advanced analysis and collaborative engineering tools (e.g. cost, science traceability, mission design, knowledge capture, study and analysis support infrastructure) are also under development for use in A-Team studies and will be discussed briefly. The A-Team facilities provide a constructive environment for innovative ideas from all aspects of mission formulation to eliminate isolated studies and come together early in the development cycle when they can provide the biggest impact. This paper provides an overview of the A-Team, its study processes, roles, methods, tools and facilities.

Team Eureka↗