Search NASA⌕ Search

SEARCH · Search NASA

Results for “harmonic analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Coupling constant metamorphosis, the Staeckel transform and superintegrability

This paper is dedicated to the memory of Marcos Moshinsky. In this paper, we discuss the important role that coupling constant metamorphosis (CCM) and the Staeckel transform have played in the analysis of superintegrable systems. We explain the relation between the two and in particular show that they coincide when transforming between second-order superintegrable systems. Unlike in the case of second-order superintegrability, the quantum analog of CCM has only been proven for a subclass of systems with integrals of a specific form. We give the proof and as an application show the mapping of a family of superintegrable deformations of the simple harmonic oscillator to an associated family of superintegrable deformations of the Kepler-Coulomb potential.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Controlled Pyroshock Test Transients Can Be Used To Better Match Operational Shock Transients and Reduce Artificial Pyroshock Test Failures [Slides]

Shock analysis is typically done via SRS (shock response spectrum). Oftentimes shock analysis is not performed because most loads specifications only supply SRS requirements with no representative shock transients that can be used for analysis. SRS analysis is too conservative. There is no structural dynamics involved as all modes are assumed to have peak responses simultaneously and in-phase with each other. It is possible that all other loads and combination of loads show the design to be good, whereas SRS analysis (1000 g’s are involved) results may require redesign. Multiple shock transients can satisfy a SRS, yet most loads documents don’t provide a representative shock transient that could be used for shock analysis. Shock testing is less common than harmonic and random vibration testing. Engineers typically go into shock tests with very little knowledge of what to expect. A pass/fail type of approach with very little engineering done to prepare for the test or to control the type of shock transient is used. Most engineers will not model the shock test fixture due to lack of knowledge about the details of the test setup. Shock analysis and testing is often an open loop type situation with no test setup modeling, no test correlation, and no control over the test shock transient. In this work, if we can create applied test force transient that comes close to matching calculated force transient then a more reasonable acceleration transient will be created at the test reference accelerometer that better matches operational shocks.

42 ENGINEERING↗

On determining the spectrum of primordial inhomogeneity from the COBE DMR sky maps: Method

The natural approach to a spectral analysis of data distributed on the sky employs spherical harmonic decomposition. A common problem encountered in practical astronomy is the lack of full sky coverage in the available data. For example, the removal of the Galactic plane data from the Cosmic Background Explorer (COBE) Differential Microwave Radiometer (DMR) sky maps compromises Fourier analysis of the cosmic microwave background (CMB) temperature distribution due to the loss of orthogonality of the spherical harmonics. An explicit method for constructing orthonormal functions on an incomplete (e.g., Galaxy-cut) sphere is presented. These functions should be used in the proper Fourier analysis of the COBE DMR sky maps to provide the correct input for the determination of the spectrum of primordial inhomogeneity. The results of such an analysis are presented in an accompanying Letter. A similar algebraic construction of appropriate functions can be devised for other astronomical applications.

Gorski, Krzysztof M.↗

Diurnal cycle of precipitation over global monsoon systems in CMIP6 simulations

Accurate simulation of the diurnal cycle of precipitation over different climate regimes, including global monsoon systems, is an ongoing challenge for current state-of-the-art climate models. Here, in this study, the diurnal cycles of summertime precipitation from 21 CMIP6 historical simulations are evaluated with the NASA IMERG data via the diurnal harmonic amplitude and phase from the Fourier analysis in seven regional monsoon systems: Northern and Southern Africa monsoons, South Asia monsoon, East Asia monsoon, Australia monsoon, and North and South America monsoons. Particularly, we focus on four subregions including ocean, coastal ocean, land, and coastal land considering the different underlying physical processes. It is found that the CMIP6 historical simulations perform fairly well on reproducing the diurnal cycle of precipitation over ocean and coastal ocean, while the simulated diurnal harmonic phase and amplitude over land and coastal land show larger biases and model spread compared to biases over ocean and coastal ocean. The simulation of precipitation diurnal cycle is substantially improved in the multi-model mean of both CMIP6 historical and CMIP6 AMIP simulations compared with that of CMIP5 historical simulations. But the model bias of precipitation diurnal cycle is in general similar between CMIP6 AMIP and CMIP6 historical simulations, which suggests that the impact of the interactive ocean on the simulated diurnal precipitation averaged over a large domain is generally minor. The influence of model resolution on the diurnal cycle is shown in mixed directions across various subregions, and significant improvement from the low- to high-resolution models is only notable over coastal ocean.

54 ENVIRONMENTAL SCIENCES↗

Characterization of Deficiencies in the Frequency Domain Forced Response Analysis Technique for Supersonic Turbine Bladed Disks

Turbine blades in rocket and jet engine turbomachinery experience enormous harmonic loading conditions. These loads result from the integer number of upstream and downstream stator vanes as well as the other turbine stages. Assessing the blade structural integrity is a complex task requiring an initial characterization of whether resonance is possible and then performing a forced response analysis if that condition is met. The standard technique for forced response analysis in rocket engine turbines is to decompose a computational fluid dynamics (CFD).generated flow field into its harmonic components, and to then perform a frequency response analysis at the problematic natural frequencies using cyclically symmetric structural dynamic models. Recent CFD analysis and water-flow testing at NASA/MSFC, though, indicates that this technique may miss substantial harmonic and non ]harmonic excitation sources that become present in complex flows. This complex content can only be captured by a CFD flow field encompassing at least an entire revolution. A substantial development effort to create a series of software programs to enable application of the 360 degree forcing function in a frequency response analysis on cyclic symmetric models has been completed (to be described in a future paper), but the question still remains whether the frequency response analysis itself is capable of capturing the excitation content sufficiently. Two studies comparing frequency response analysis with transient response analysis, therefore, of bladed-disks undergoing this complex flow environment have been performed. The first is of a bladed disk with each blade modeled by simple beam elements and the disk modeled with plates (using the finite element code MSC/NASTRAN). The focus of this model is to be representative of response of realistic bladed disks, and so the dimensions are roughly equivalent to the new J2X rocket engine 1st stage fuel pump turbine. The simplicity of the model allows the CFD load to be able to be readily applied, along with analytical and experimental variations in both the temporal and spatial fourier components of the excitation. In addition, this model is a first step in identifying response differences between transient and frequency forced response analysis techniques. The second phase assesses this difference for a much more realistic solid model of a bladed-disk in order to evaluate the effect of the spatial variation in loading on blade dominated modes. Neither research on the accuracy of the frequency response method when used in this context or a comprehensive study of the effect of test-observed variation on blade forced response have been found in the literature, so this research is a new contribution to practical structural dynamic analysis of gas turbines. The primary excitation of the upstream nozzles interacts with the blades on fuel pump of the J2X causes the 5th Nodal diameter modes to be excited, as explained by Tyler and Sofrin1, so a modal analysis was first performed on the beam/plate model and the 5ND bladed-disk mode at 40167 hz was identified and chosen to be the one excited at resonance (see figure 1). The first forced response analysis with this model focuses on identifying differences between frequency and transient response analyses. A hypothesis going into the analysis was that perhaps the frequency response was enforcing a temporal periodicity that did not really exist, and so therefore it would overestimate the response. As high dynamic response was a considerable source of stress in the J2X, examining this concept could potentially be beneficial for the program.

Brown, Andrew M.↗

Second and Third Harmonic Measurements at the Linac Coherent Light Source

The Linac Coherent Light Source (LCLS) started user commissioning in October of 2009, producing Free Electron Laser (FEL) radiation between 800 eV and 8 keV [1]. The fundamental wavelength of the FEL dominates radiation in the beamlines, but the beam also produces nonnegligible levels of radiation at higher harmonics. The harmonics may be desirable as a source of harder X-rays, but may also contribute backgrounds to user experiments. In this paper we present preliminary measurements of the second and third harmonic content in the FEL. We also measure the photon energy cutoff of the soft X-ray mirrors to determine the extent to which higher harmonics reach the experimental stations. We present preliminary second and third harmonic measurements for LCLS. At low energies (below 1 keV fundamental) we measure less than 0.1% second harmonic content. The second harmonic will be present in the soft X-ray beam line for fundamental photon energies below approximately 1.1 keV. At low and high energies, we measure third harmonic content ranging from 0.5% to 3%, which is consistent with expectations. For both second and third harmonics, experimental work is ongoing. More rigorous analysis of the data will be completed soon.

43 PARTICLE ACCELERATORS↗

Magnetohydrodynamic interference with the edge pedestal motional Stark effect diagnostic on DIII-D

Accurate measurement of internal magnetic field direction using motional Stark effect (MSE) polarimetry in the edge pedestal is desired for nearly all tokamak scenario work. A newly installed 500 kHz 32-channel digitizer on the MSE diagnostic of DIII-D allows full spectral information of the polarimeter signal to be recovered for the first time. Fourier analysis of this data has revealed magnetohydrodynamic (MHD) fluctuations in the plasma edge pedestal at {rho}{>=} 0.92. By correlating edge localized mode fluctuations seen on lock-in amplifier outputs with MSE spectrograms, it has been shown that edge pedestal tearing mode fluctuations cause interference with MSE second harmonic instrument frequencies. This interference results in unrecoverable errors in the real-time polarization angle measurement that are more than an order of magnitude larger than typical polarimeter uncertainties. These errors can cause as much as a 38% difference in local q. By using a redundant measure of the linear polarization found at the fourth harmonic photo-elastic modulator (PEM) frequency, MHD interference can be avoided. However, because of poorer signal-to-noise the fourth harmonic signal computed polarization angle shows no improvement over the MHD polluted second harmonics. MHD interference could be avoided in future edge pedestal tokamak polarimeters by utilizing PEMs with higher fundamental frequencies and a greater separation between their frequencies.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Emission times in high-order harmonic generation

We calculate the emission times of the radiation in high-order harmonic generation using the Gabor transform of numerical data obtained from solving the time-dependent Schroedinger equation in one, two, and three dimensions. Both atomic and molecular systems, including nuclear motion, are investigated. Lewenstein model calculations are used to gauge the performance of the Gabor method. The resulting emission times are compared against the classical simple man's model as well as against the more accurate quantum orbit model based on complex trajectories. The influence of the range of the binding potential (long or short) on the level of agreement is assessed. Our analysis reveals that the short-trajectory harmonics are emitted slightly earlier than predicted by the quantum orbit model. This partially explains recent experimental observations for atoms and molecules. Furthermore, we observe a distinct signature of two-center interference in the emission times for H{sub 2} and D{sub 2}.

74 ATOMIC AND MOLECULAR PHYSICS↗

Isotropic octupolar second harmonic generation response in LaBGeO{sub 5} glass-ceramic with spherulitic precipitation

A spherulitic crystallization of the crystalline phase LaBGeO{sub 5} is generated in the 25La{sub 2}O{sub 3}-25B{sub 2}O{sub 3}-50 GeO{sub 2} glass system. Linear and nonlinear optical properties of lanthanum borogermanate glass-ceramic have been investigated at both macroscopic and microscopic scales. Polarized μ-Raman analysis has evidenced a radial distribution of the crystallites along the c-axis inside spherulites, whereas polarized μ-Second Harmonic Generation (SHG) analysis revealed intensity maxima perpendicularly to the c-axis crystallites orientation. Polarized SHG mapping of a spherulite indicate that no dipolar response along the c-axis oriented crystallites occurs despite the individual dipolar symmetry C{sub 3} of the crystallites. At a larger mm scale, the isotropic scattering of spherulites recorded from macroscopic SHG experiment in the forward direction is consistent with an average coherent octupolar response per spherulite. These SHG analyses at different scale are both in accordance with radial antiferroelectric orientation along the c-axis of crystallites inside each spherulite.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First zonal harmonic component of cosmic ray neutron intensity

Cosmic ray neutron data from the cosmic ray stations from the worldwide network in 1966, 1967 and 1969 are analyzed by means of the three dimensional analysis method by Nagashima. The variations of the north-south anisotropy, which is the first zonal harmonic component obtained from the analysis are studied. The result obtained confirms earlier findings. Relationship of the anisotropy to the interplanetary magnetic field sector polarity is also studied.

Takahashi, H.↗

Combined Bluntness and Roughness Effects on Cones at Hypersonic Speeds

This computational study investigates the effects of discrete roughness elements on a blunt cone at zero degrees angle of attack in a Mach 6 flow. Motivation was provided by experiments conducted in the Air Force Research Laboratory Mach 6 High Reynolds Number facility on a 7-degree half-angle cone with a roughness array located at 45 degrees from the apex on two nose tips of different blutness but equivalent roughness Reynolds number. Transition was only affected on the blunter cone, indicating that the transition onset is associated with the combined effects of bluntness and roughness. The present study investigates the 15.24 mm nose radius, 420 azimuthal wavenumber case via Navier-Stokes computations of the laminar base flow and instability analysis. Plane-marching parabolized stability equations (PSE) and inflow-resolvent analysis based on the three-dimensional, harmonic linearized Navier-Stokes equations (HLNSE) are used to calculate the amplification of disturbances along the roughness wake as well as over the roughness nearfield. Results show that the roughness shape can have a great impact on the characteristics of the most amplified wake instabilities. For the experimental configuration with cubic roughness elements of 15 μ m height, the flow is marginally unstable. For prismatic elements of 20 μ m height, the PSE predicts a logarithmic disturbance amplification ratio of N = 5.6 along its wake, but this ratio increases to N = 9.6 when the amplification over the roughness and separation regions is included in the inflow-resolvent analysis.

Boundary-layer transition↗

Combined Bluntness and Roughness Effects on Cones at Hypersonic Speeds

This computational study investigates the effects of discrete roughness elements on a blunt cone at zero degrees angle of attack in a Mach 6 flow. Motivation was provided by experiments conducted in the Air Force Research Laboratory Mach 6 High Reynolds Number facility on a 7-degree half-angle cone with a roughness array located at 45 degrees from the apex on two nose tips of different blutness but equivalent roughness Reynolds number. Transition was only affected on the blunter cone, indicating that the transition onset is associated with the combined effects of bluntness and roughness. The present study investigates the 15.24 mm nose radius, 420 azimuthal wavenumber case via Navier-Stokes computations of the laminar base flow and instability analysis. Plane-marching parabolized stability equations (PSE) and inflow-resolvent analysis based on the three-dimensional, harmonic linearized Navier-Stokes equations (HLNSE) are used to calculate the amplification of disturbances along the roughness wake as well as over the roughness nearfield. Results show that the roughness shape can have a great impact on the characteristics of the most amplified wake instabilities. For the experimental configuration with cubic roughness elements of 15 μ m height, the flow is marginally unstable. For prismatic elements of 20 μ m height, the PSE predicts a logarithmic disturbance amplification ratio of N = 5.6 along its wake, but this ratio increases to N = 9.6 when the amplification over the roughness and separation regions is included in the inflow-resolvent analysis.

Boundary-layer transition↗

Observations of discrete magnetosonic waves off the magnetic equator

Fast mode magnetosonic waves are typically confined close to the magnetic equator and exhibit harmonic structures at multiples of the local, equatorial proton cyclotron frequency. Here, we report observations of magnetosonic waves well off the equator at geomagnetic latitudes from -16.5°to -17.9° and L shell ~2.7–4.6. The observed waves exhibit discrete spectral structures with multiple frequency spacings. The predominant frequency spacings are ~6 and 9 Hz, neither of which is equal to the local proton cyclotron frequency. Backward ray tracing simulations show that the feature of multiple frequency spacings is caused by propagation from two spatially narrow equatorial source regions located at L ≈ 4.2 and 3.7. The equatorial proton cyclotron frequencies at those two locations match the two observed frequency spacings. Finally, our analysis provides the first observations of the harmonic nature of magnetosonic waves well away from the equatorial region and suggests that the propagation from multiple equatorial sources contributes to these off-equatorial magnetosonic emissions with varying frequency spacings.

79 ASTRONOMY AND ASTROPHYSICS↗

On the Theory of Acoustic Sounding of Tubular Channels Containing Depressurization Portions

A study is made of the evolution of pressure perturbations that propagate in a tubular channel filled with liquid or gas and having a damaged portion in the form of fairly large slots when their hydraulic resistance is minor. For this purpose, the authors have adopted a mathematical model taking account of viscous friction and of the transfer of heat in a thin layer of the liquid (or the gas) near the wall. Based on this model, dispersion relations have been obtained for the processes of propagation and reflection of harmonic waves from the damaged portion. An analysis has been made of the dependences of the phase velocity, the attenuation factor, and also the coefficients of reflection and transmission on the circular frequency, the physical properties of the liquid or the gas, and also the size of damage. The authors have presented results illustrating the dynamics of pulsed signals as a function of the distance to the damaged portion from the inlet cross section of the channel, the damage scale, and of the form of the medium (liquid or a gas) in the channel.

42 ENGINEERING↗

Time-dependent, multimode interaction analysis of the gyroklystron amplifier

In this paper, a time-dependent multimode nonlinear analysis for the gyroklystron amplifier has been developed by extending the analysis of gyrotron oscillators by employing the self-consistent approach. The nonlinear analysis developed here has been validated by taking into account the reported experimental results for a 32.3 GHz, three cavity, second harmonic gyroklystron operating in the TE{sub 02} mode. The analysis has been used to estimate the temporal RF growth in the operating mode as well as the nearby competing modes. Device gain and bandwidth have been computed for different drive powers and frequencies. The effect of various beam parameters, such as beam voltage, beam current, and pitch factor, has also been studied. The computational results have estimated the gyroklystron saturated RF power ∼319 kW at 32.3 GHz with efficiency ∼23% and gain ∼26.3 dB with device bandwidth ∼0.027% (8 MHz) for a 70 kV, 20 A electron beam. The computed results are found to be in agreement with the experimental values within 10%.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analysis of effects of macroscopic propagation and multiple molecular orbitals on the minimum in high-order harmonic generation of aligned CO{sub 2}

We report theoretical calculations of the effect of the multiple-orbital contribution in high-order harmonic generation (HHG) of aligned CO{sub 2} with the inclusion of macroscopic propagation of harmonic fields in the medium. Our results show very good agreement with recent experiments for the dynamics of the minimum in HHG spectra as laser intensity or alignment angle changes. Calculations are carried out to check how the position of the minimum in HHG spectra depends on the degrees of molecular alignment, laser-focusing conditions, and the effects of alignment-dependent ionization rates of the different molecular orbitals. These analyses help to explain why the minima observed in different experiments may vary.

74 ATOMIC AND MOLECULAR PHYSICS↗

Standing hydromagnetic oscillations in the magnetosphere

The mechanisms for generating Alfven waves in the magnetosphere are determined, on the basis of a comprehensive survey of satellite magnetometer data. The mechanisms are classified in terms of the physical properties of standing Alfven waves such as the direction of the major axis of polarization, harmonic mode, and the azimuthal wave number. In an analysis of the statistical organization of the pulsations, it is shown that the most common transverse waves seem to be azimuthally polarized waves involving the fundamental and several harmonics, with radially polarized waves excited at the second harmonic. The former are probably driven externally, while the latter are likely to be excited internally through particle-wave interactions.

Takahashi, K.↗

String junctions and holographic interfaces

In this paper we study half-BPS type IIB supergravity solutions with multiple AdS{sub 3}xS{sup 3}xM{sub 4} asymptotic regions, where M{sub 4} is either T{sup 4} or K{sub 3}. These solutions were first constructed in [M. Chiodaroli, M. Gutperle, and D. Krym, J. High Energy Phys. 02 (2010) 066.] and have geometries given by the warped product of AdS{sub 2}xS{sup 2}xM{sub 4} over {Sigma}, where {Sigma} is a Riemann surface. We show that the holographic boundary has the structure of a star graph, i.e. n half-lines joined at a point. The attractor mechanism and the relation of the solutions to junctions of self-dual strings in six-dimensional supergravity are discussed. The solutions of [M. Chiodaroli, M. Gutperle, and D. Krym, J. High Energy Phys. 02 (2010) 066.] are constructed introducing two meromorphic and two harmonic functions defined on {Sigma}. We focus our analysis on solutions corresponding to junctions of three different conformal field theories and show that the conditions for having a solution charged only under Ramond-Ramond three-form fields reduce to relations involving the positions of the poles and the residues of the relevant harmonic and meromorphic functions. The degeneration limit in which some of the poles collide is analyzed in detail. Finally, we calculate the holographic boundary entropy for a junction of three CFTs and obtain a simple expression in terms of poles and residues.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗