Search NASA⌕ Search

SEARCH · Search NASA

Results for “interaction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

The effect of bleed configuration on shock/boundary layer interactions

The flow field characteristics are simulated numerically in an oblique shock wave/laminar boundary layer interaction for three different bleed configurations. The numerical solution for the flow field is obtained for the strong conservation-law form of the two-dimensional compressible Navier-Stokes equations using an implicit scheme. The computations model the flow in the interaction region and inside the bleed slot for an impinging oblique shock of sufficient strength to cause boundary layer separation on a flat plate boundary layer. The computed results are presented for a normal bleed slot at three different locations, upstream, across and downstream of the shock impingement point. The detailed flow characteristics in the interaction zone and inside the bleed slot are compared for the three cases. The resulting surface pressure and shear stress distributions are also compared for the three bleed cases and for the shock wave boundary layer interaction without bleed.

Hamed, A.↗
NASA NTRS1991

Analysis of airframe/engine interactions in integrated flight and propulsion control

An analysis framework for the assessment of dynamic cross-coupling between airframe and engine systems from the perspective of integrated flight/propulsion control is presented. This analysis involves to determining the significance of the interactions with respect to deterioration in stability robustness and performance, as well as critical frequency ranges where problems may occur due to these interactions. The analysis illustrated here investigates both the airframe's effects on the engine control loops and the engine's effects on the airframe control loops in two case studies. The second case study involves a multi-input/multi-output analysis of the airframe. Sensitivity studies are performed on critical interactions to examine the degradations in the system's stability robustness and performance. Magnitudes of the interactions required to cause instabilities, as well as the frequencies at which the instabilities occur are recorded. Finally, the analysis framework is expanded to include control laws which contain cross-feeds between the airframe and engine systems.

Schierman, John D.↗
NASA NTRS1990

Radial evolution of interaction regions

Near and outside 1 AU, corotating interaction regions bounded by shocks form at the leading edges of high-speed streams. This paper describes the radial evolution of interaction regions, the merging of interaction regions belonging to neighboring streams, and the coalescence of interaction regions belonging to successive solar rotations.

Whang, Y. C.↗
NASA NTRS1991

Data analysis and interpretation related to space system/environment interactions at LEO altitude

Several studies made on the interaction of active systems with the LEO space environment experienced from orbital or suborbital platforms are covered. The issue of high voltage space interaction is covered by theoretical modeling studies of the interaction of charged solar cell arrays with the ionospheric plasma. The theoretical studies were complemented by experimental measurements made in a vacuum chamber. The other active system studied was the emission of effluent from a space platform. In one study the emission of plasma into the LEO environment was studied by using initially a 2-D model, and then extending this model to 3-D to correctly take account of plasma motion parallel to the geomagnetic field. The other effluent studies related to the releases of neutral gas from an orbiting platform. One model which was extended and used determined the density, velocity, and energy of both an effluent gas and the ambient upper atmospheric gases over a large volume around the platform. This model was adapted to study both ambient and contaminant distributions around smaller objects in the orbital frame of reference with scale sizes of 1 m. The other effluent studies related to the interaction of the released neutral gas with the ambient ionospheric plasma. An electrostatic model was used to help understand anomalously high plasma densities measured at times in the vicinity of the space shuttle orbiter.

Raitt, W. John↗
NASA NTRS1992

Interactive solution-adaptive grid generation procedure

TURBO-AD is an interactive solution adaptive grid generation program under development. The program combines an interactive algebraic grid generation technique and a solution adaptive grid generation technique into a single interactive package. The control point form uses a sparse collection of control points to algebraically generate a field grid. This technique provides local grid control capability and is well suited to interactive work due to its speed and efficiency. A mapping from the physical domain to a parametric domain was used to improve difficulties encountered near outwardly concave boundaries in the control point technique. Therefore, all grid modifications are performed on the unit square in the parametric domain, and the new adapted grid is then mapped back to the physical domain. The grid adaption is achieved by adapting the control points to a numerical solution in the parametric domain using control sources obtained from the flow properties. Then a new modified grid is generated from the adapted control net. This process is efficient because the number of control points is much less than the number of grid points and the generation of the grid is an efficient algebraic process. TURBO-AD provides the user with both local and global controls.

Henderson, Todd L.↗
NASA NTRS1992

Interactive solution-adaptive grid generation

TURBO-AD is an interactive solution-adaptive grid generation program under development. The program combines an interactive algebraic grid generation technique and a solution-adaptive grid generation technique into a single interactive solution-adaptive grid generation package. The control point form uses a sparse collection of control points to algebraically generate a field grid. This technique provides local grid control capability and is well suited to interactive work due to its speed and efficiency. A mapping from the physical domain to a parametric domain was used to improve difficulties that had been encountered near outwardly concave boundaries in the control point technique. Therefore, all grid modifications are performed on a unit square in the parametric domain, and the new adapted grid in the parametric domain is then mapped back to the physical domain. The grid adaptation is achieved by first adapting the control points to a numerical solution in the parametric domain using control sources obtained from flow properties. Then a new modified grid is generated from the adapted control net. This solution-adaptive grid generation process is efficient because the number of control points is much less than the number of grid points and the generation of a new grid from the adapted control net is an efficient algebraic process. TURBO-AD provides the user with both local and global grid controls.

Choo, Yung K.↗
NASA NTRS1992

TIGER: Turbomachinery interactive grid generation

A three dimensional, interactive grid generation code, TIGER, is being developed for analysis of flows around ducted or unducted propellers. TIGER is a customized grid generator that combines new technology with methods from general grid generation codes. The code generates multiple block, structured grids around multiple blade rows with a hub and shroud for either C grid or H grid topologies. The code is intended for use with a Euler/Navier-Stokes solver also being developed, but is general enough for use with other flow solvers. TIGER features a silicon graphics interactive graphics environment that displays a pop-up window, graphics window, and text window. The geometry is read as a discrete set of points with options for several industrial standard formats and NASA standard formats. Various splines are available for defining the surface geometries. Grid generation is done either interactively or through a batch mode operation using history files from a previously generated grid. The batch mode operation can be done either with a graphical display of the interactive session or with no graphics so that the code can be run on another computer system. Run time can be significantly reduced by running on a Cray-YMP.

Soni, Bharat K.↗
NASA NTRS1992

Electrical and chemical interactions at Mars Workshop, part 1

The Electrical and Chemical Interactions at Mars Workshop, hosted by NASA Lewis Research Center on November 19 and 20, 1991, was held with the following objectives in mind: (1) to identify issues related to electrical and chemical interactions between systems and their local environments on Mars, and (2) to recommend means of addressing those issues, including the dispatch of robotic spacecraft to Mars to acquire necessary information. The workshop began with presentations about Mars' surface and orbital environments, Space Exploration Initiative (SEI) systems, environmental interactions, modeling and analysis, and plans for exploration. Participants were then divided into two working groups: one to examine the surface of Mars; and the other, the orbit of Mars. The working groups were to identify issues relating to environmental interactions; to state for each issue what is known and what new knowledge is needed; and to recommend ways to fulfill the need. Issues were prioritized within each working group using the relative severity of effects as a criterion. Described here are the two working groups' contributions. A bibliography of materials used during the workshop and suggested reference materials is included.

Source record↗
NASA NTRS1992

Collision integrals for the interaction of the ions of nitrogen and oxygen in a plasma at high temperatures and pressures

The corrections to the transport cross-sections and collision integrals for Coulomb interactions arising from the application of realistic interaction energies of the ions of nitrogen and oxygen are investigated. Accurate potential-energy curves from an ab initio electronic-structure calculation and a semiclassical description of the scattering are used to determine the difference between the cross-sections for the real interaction forces and a Coulomb force for large values of the Debye shielding parameter. Graphs of the correction to the diffusion and viscosity-collision integrals are presented for temperatures from about 10,000 K to 150,000 K. This correction can be combined with tabulations of the collision integrals for shielded Coulomb potentials to determine the contribution of N(+)-N(+), N(+)-O(+), and O(+)-O(+) interactions to the transport properties of high-temperature air. Analytical forms are fitted to the calculated results to assist this application.

Stallcop, James R.↗
NASA NTRS1992

Unsteady separation in sharp fin-induced shock wave/turbulent boundary layer interaction at Mach 5

Fluctuating wall-pressure measurements are made in shock-wave/turbulent-boundary-layer interactions generated by sharp/unswept fins at angles of attack of 16, 18, 20, 22, 24, 26, and 28 degrees at Mach 5. The experiment was conducted under approximately adiabatic wall temperature conditions. The mean and rms pressure distributions can be collapsed in conical coordinates. The wall-pressure signal near separation is intermittent for all angles of attack (16-28 deg) and is qualitatively similar to that measured in unswept flows. However, the shock frequencies are higher - about 5 kHz compared to 0.5-1 kHz. Over the range of sweepbacks examined, from 25-55 deg, the spectral content of the fluctuating pressures does not change. Thus, the increase in separation-shock frequency from 1 to 5 kHz occurs at lower interaction sweepback and is not a continuous process with increasing sweepback. Power spectra at the position of maximum rms in the intermittent region for interactions in different incoming boundary layers have the same center frequency. The maximum rms in the intermittent region correlates with interaction sweepback, not with overall inviscid pressure rise.

Schmisseur, J. D.↗
NASA NTRS1992

Presupernova evolution in massive interacting binaries

The way in which binary interaction affects the presupernova evolution of massive close binaries and the resulting supernova explosions is investigated systematically by means of a Henyey-type stellar evolution code that was modified to allow its application to binary stellar evolution calculations. The code makes it possible to trace the effects of mass and angular momentum loss from the binary, as well as mass transfer within the binary system. It is found that a large number of binary scenarios can be distinguished, depending on the type of binary interaction and the evolutionary stage of the supernova progenitor at the time of the interaction. Monte Carlo simulations are performed to estimate the frequencies of the occurrence of various scenarios. It is found that, because of a previous binary interaction, 15-30 percent of all massive stars (with initial masses greater than about 8 solar masses) become helium stars, and another 5 percent of all massive stars end their lives as blue supergiants rather than as red supergiants.

Podsiadlowski, PH.↗
NASA NTRS1991

Three-dimensional blade vortex interactions

A three-dimensional time dependent Navier-Stokes analysis was applied to the rotor blade vortex interaction problem. The numerical procedure is an iterative implicit procedure using three point central differences to represent spatial derivatives. A series of calculations were made to determine the time steps, pseudo-time steps, iterations, artificial dissipation level, etc. required to maintain a nondissipative vortex. Results show the chosen method to have excellent non-dissipative properties provided the correct parameters are chosen. This study was used to set parameters for both two- and three-dimensional blade vortex interaction studies. The case considered was the interaction between a vortex and a NACA0012 airfoil. The results showed the detailed physics during the interaction including the pressure pulse propagating from the blade. The simulated flow physics was qualitatively similar to that experimentally observed. The BVI phenomena is the result of the buildup and violent collapse of the shock waves and local supersonic pockets on the blade surfaces. The resulting pressure pulse build-up appears to be centered at the blade leading edge.

Davoudzadeh, Farhad↗
NASA NTRS1992

Turbulence modeling in shock wave/turbulent boundary layer interactions

The research performed was an experimental program to help develop turbulence models for shock wave boundary layer interactions. The measurements were taken in a Mach 3, 16 deg compression corner interaction, at a unit Reynolds number of 63 x 10(exp 6)/m. The data consisted of heat transfer data taken upstream and downstream of the interaction, hot wire measurements of the instantaneous temperature and velocity fluctuations to verify the Strong Reynolds Analogy, and single- and double-pulsed Rayleigh scattering images to study the development of the instantaneous shock/turbulence interaction.

Smits, A. J.↗
NASA NTRS1992

Mode interaction in stiffened composite shells under combined mechanical and thermal loadings

Stiffened shells of various configurations fabricated out of composite materials find extensive applications in aircraft structures. Two distinctive modes of buckling dominate structural response of stiffened panels, viz. the short-wave local mode in which the shell skin buckles essentially between the stiffeners and the long-wave overall mode in which the shell skin buckles carrying the stiffeners with it. In optimized designs, the critical stresses corresponding to these modes of buckling would be close to each other. This leads to a nonlinear mode interaction which is recognized to be the principal cause of the failure of stiffened structures. If the structure is subjected to through-the-thickness thermal gradients, then large-wave bending effects would begin to occur well below the overall critical load and these would play the role of overall imperfections. The load carrying capacity would be significantly diminished as a result of interaction of local buckling with overall thermal distortions. The analysis of this problem using standard finite element techniques can be shown to be prohibitively expensive for design iterations. A concept which would greatly facilitate the analysis of mode interaction is advanced. We note that the local buckling occurs in a more or less periodic pattern in a structure having regular spacings of stiffeners. Thus it is a relatively simple matter to analyze the local buckling and the second order effects (which are essential for modeling postbuckling phenomena) using a unit cell of the structure. Once analyzed, these dormations are embedded in a shell element. Thus, a shell element could span several half-waves of local buckling and still be able to depict local buckling effects with requisite accuracy. A major consequence of the interaction of overall buckling/bending is the slow variation of the local buckling amplitude across the structure - the phenomenon of 'amplitude modulation' - and this is accounted for in the present model by letting the scaling parameter of the local mode vary according to a 'slowly varying' function. The construction of the analytical model involves essentially two stages and these are described briefly.

Sridharan, Srinivasan↗
NASA NTRS1992

Flow visualizations of perpendicular blade vortex interactions

Helium bubble flow visualizations have been performed to study perpendicular interaction of a turbulent trailing vortex and a rectangular wing in the Virginia Tech Stability Tunnel. Many combinations of vortex strength, vortex-blade separation (Z(sub s)) and blade angle of attack were studied. Photographs of representative cases are presented. A range of phenomena were observed. For Z(sub s) greater than a few percent chord the vortex is deflected as it passes the blade under the influence of the local streamline curvature and its image in the blade. Initially the interaction appears to have no influence on the core. Downstream, however, the vortex core begins to diffuse and grow, presumably as a consequence of its interaction with the blade wake. The magnitude of these effects increases with reduction in Z(sub s). For Z(sub s) near zero the form of the interaction changes and becomes dependent on the vortex strength. For lower strengths the vortex appears to split into two filaments on the leading edge of the blade, one passing on the pressure and one passing on the suction side. At higher strengths the vortex bursts in the vicinity of the leading edge. In either case the core of its remnants then rapidly diffuse with distance downstream. Increase in Reynolds number did not qualitatively affect the flow apart from decreasing the amplitude of the small low-frequency wandering motions of the vortex. Changes in wing tip geometry and boundary layer trip had very little effect.

Rife, Michael C.↗
NASA NTRS1993

Radio jets in colliding galaxies: Testing the interaction-activity connection

The idea that galaxy interactions and merging are related to the generation of starburst and AGN activity in galactic nuclei has been the subject of intensive investigations over the past several years and is still a matter of lively debate. Peculiar morphologies, indicative of tidal interactions, have been detected in high-luminosity radio galaxies, in quasars, and in ultraluminous IRAS galaxies. In addition, low-luminosity radio and active galaxies show similar evidence for a recent merger or for nearby companions. In a recent CCD optical study of galaxies selected on the basis that they all contain well defined radio jets, it was found that almost half of the sample consists of pairs of elliptical galaxies. Many of these low-luminosity radio galaxies with companions show a well defined distorted radio jet structure at the VLA scale with an S- or C-shaped morphology. We have developed a general numerical simulation algorithm for ballistic radio jets with the intention of applying this model to the study of the bent jets seen in colliding pairs of galaxies and with the hope of testing the well documented interaction-activity connection. In our model the morphological evolution of the jets is determined by their response to the simple mechanical forces (i.e., gravity and ram pressure) imposed on them from both the host and the companion galaxies. Radiative losses, jet precession, magnetic effects, relativistic terms, and hydrodynamic instabilities have all been ignored. Starting with a previously derived collision model for the interacting pair of elliptical galaxies NGC 4782/4783, we have used our algorithm to simulate the specific two-sided jet morphology seen in the radio source 3C 278, associated with NGC 4782. This is the first time that such jet simulations have been produced for a galaxy pair whose relative orbit was determined independently from the jet modeling.

Borne, Kirk D.↗
NASA NTRS1992

Multi-wave interaction theory for wind-generated surface gravity waves

Consistently employing the assumption of localness of wave-wave interactions in the wavenumber space, the Kolmogorov treatment of the energy cascade is applied to the case of wind-generated surface gravity waves. The effective number v of resonantly interacting wave harmonics is not limited to four but is found as a solution of a coupled system of equations expressing: (i) the dependence of the spectrum shape on the degree of the wave nonlinearity, and (ii) the continuity of the wave action flux through the spectrum given a continuous positive input from wind. The latter is specified in a Miles-type fashion, and a simple scaling relationship based on the concept of the turnover time is derived in place of the kinetic equation. The mathematical problem is reduced to an ordinary differential equation of first order. The exponent in the 'power law' for the spectral density of the wave potential energy and the effective number of resonantly interacting wave harmonics are found as functions of the wave frequency and of external factors of wind-wave interaction. The solution is close to the Zakharov-Filonenko spectrum at low frequencies and low wind input while approaching the Phillips spectrum at high frequencies and sufficiently high wind.

Glazman, Roman E.↗
NASA NTRS1992

Hypersonic flow separation in shock wave boundary layer interactions

An assessment is presented for the experimental data on separated flow in shock wave turbulent boundary layer interactions at hypersonic and supersonic speeds. The data base consists mainly of two dimensional and axisymmetric interactions in compression corners or cylinder-flares, and externally generated oblique shock interactions with boundary layers over flat plates or cylindrical surfaces. The conditions leading to flow separation and the subsequent changes in the flow empirical correlations for incipient separation are reviewed. The effects of the Mach number, Reynolds number, surface cooling and the methods of detecting separation are discussed. The pertinent experimental data for the separated flow characteristics in separated turbulent boundary layer shock interaction are also presented and discussed.

Hamed, A.↗