Search NASA⌕ Search

SEARCH · Search NASA

Results for “interval analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Immobilization of Radioactive Materials Using Porous Iron Composite Media - 18582

High levels of nitrate (NO{sub 3}) derived from agriculture and naturally occurring radioactive materials (NORM), primarily uranium (U) and natural decay chain products that have been mobilized by the influx of oxygenated, high-alkalinity water, are a threat to shallow groundwater resources in California. Porous Iron Composite (PIC) materials were evaluated as a water treatment option in a series of batch experiments. While the use of Zero Valent Iron (ZVI) to address groundwater contaminated with NO{sub 3} or U has been demonstrated, the ability of PICs to chemically reduce and immobilize U and other associated contaminants in oxygenated alkaline groundwater where soluble uranyl-carbonate species dominate and high NO{sub 3} levels may compete for reductive capacity remain a concern. Additionally, ZVI materials have been used to immobilize other redox sensitive radionuclides (e.g., technetium-99 ({sup 99}Tc)) with limited success. Batch tests were conducted using an artificial groundwater surrogate (i.e., CAGW for California Groundwater) containing ∼ 100 mg L{sup -1} NO{sub 3}{sup -}, 200 mg L{sup -1} alkalinity, 100 μg L{sup -1} U, 100 μg L{sup -1} rhenium (Re) as a non-radioactive surrogate for the nuclear fission product technetium-99 ({sup 99}Tc), 100 μg L{sup -1} stable strontium (Sr) as a surrogate for radium (Ra) and the fission product strontium-90 ({sup 90}Sr), and 50 μg L{sup -1} arsenic (As), a common groundwater contaminant. Five gram samples of the PIC material were reacted with 200 mL of CAGW under two different atmospheric conditions to evaluate the impact of O{sub 2}. Batch tests were also conducted in the presence and absence of another oxidized species, NO{sub 3}. At specific time intervals, a small aliquot was collected from each batch treatment for chemical analysis (i.e., U, Re, As, Fe, NO{sub 3}, etc.) and the pH and ORP of the remaining suspension was measured. The PIC was effective at fully reducing NO{sub 3}{sup -} levels over the extended reaction time, even though the reactor pH quickly increased above 8.0 during equilibration. Soluble levels of U and Re decreased in a similar fashion to NO{sub 3}{sup -} in the presence and absence of O{sub 2}. Soluble As levels decreased more rapidly than other contaminants, but remained at ∼ 1 μg L{sup -1}. Very little nitrite (NO{sub 2}{sup -}) was detected in the batch tests, with NH{sub 4}{sup +} levels consistent with the amount of NO{sub 3}{sup -} reduced. Similar rates of immobilization for U, Re, and As were observed in the presence and absence of NO{sub 3}{sup -}. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

IN-SITU ASSAY OF TRANSURANIC RADIONUCLIDES IN THE VADOSE ZONE USING HIGH-RESOLUTION SPECTRAL GAMMA LOGGING - A HANFORD CASE STUDY

High-resolution spectral gamma logging in steel-cased boreholes is used to detect and quantify transuranic radionuclides in the subsurface. Pu-239, Pu-241, Am-241, and Np-237 are identified based on characteristic decay gammas. Typical minimum detectable levels are on the order of 20 to 40 nCi/g. In intervals of high transuranic concentrations, gamma rays from other sources may complicate analysis and interpretation. Gamma rays detected in the borehole may originate from three sources: decay of the parent transuranic radionuclide or a daughter; alpha interactions; and interactions with neutrons resulting from either spontaneous fission or alpha particle interactions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Fuzzy-probabilistic calculations of water-balance uncertainty

Hydrogeological systems are often characterized by imprecise, vague, inconsistent, incomplete, or subjective information, which may limit the application of conventional stochastic methods in predicting hydrogeologic conditions and associated uncertainty. Instead, redictions and uncertainty analysis can be made using uncertain input parameters expressed as probability boxes, intervals, and fuzzy numbers. The objective of this paper is to present the theory for, and a case study as an application of, the fuzzyprobabilistic approach, ombining probability and possibility theory for simulating soil water balance and assessing associated uncertainty in the components of a simple waterbalance equation. The application of this approach is demonstrated using calculations with the RAMAS Risk Calc code, to ssess the propagation of uncertainty in calculating potential evapotranspiration, actual evapotranspiration, and infiltration-in a case study at the Hanford site, Washington, USA. Propagation of uncertainty into the results of water-balance calculations was evaluated by hanging he types of models of uncertainty incorporated into various input parameters. The results of these fuzzy-probabilistic calculations are compared to the conventional Monte Carlo simulation approach and estimates from field observations at the Hanford site.

54 ENVIRONMENTAL SCIENCES↗

Interval Between Hysterectomy and Start of Radiation Treatment Is Predictive of Recurrence in Patients With Endometrial Carcinoma

Purpose: Adjuvant radiation therapy (RT) has been shown to improve local control in patients with endometrial carcinoma. We analyzed the impact of the time interval between hysterectomy and RT initiation in patients with endometrial carcinoma. Methods and Materials: In this institutional review board-approved study, we identified 308 patients with endometrial carcinoma who received adjuvant RT after hysterectomy. All patients had undergone hysterectomy, oophorectomy, and pelvic and para-aortic lymph node evaluation from 1988 to 2010. Patients' demographics, pathologic features, and treatments were compared. The time interval between hysterectomy and the start of RT was calculated. The effects of time interval on recurrence-free (RFS), disease-specific (DSS), and overall survival (OS) were calculated. Following univariate analysis, multivariate modeling was performed. Results: The median age and follow-up for the study cohort was 65 years and 72 months, respectively. Eighty-five percent of the patients had endometrioid carcinoma. RT was delivered with high-dose-rate brachytherapy alone (29%), pelvic RT alone (20%), or both (51%). Median time interval to start RT was 42 days (range, 21-130 days). A total of 269 patients (74%) started their RT <9 weeks after undergoing hysterectomy (group 1) and 26% started ≥9 weeks after surgery (group 2). There were a total of 43 recurrences. Tumor recurrence was significantly associated with treatment delay of ≥9 weeks, with 5-year RFS of 90% for group 1 compared to only 39% for group 2 (P<.001). On multivariate analysis, RT delay of ≥9 weeks (P<.001), presence of lymphovascular space involvement (P=.001), and higher International Federation of Gynecology and Obstetrics grade (P=.012) were independent predictors of recurrence. In addition, RT delay of ≥9 weeks was an independent significant predictor for worse DSS and OS (P=.001 and P=.01, respectively). Conclusions: Delay in administering adjuvant RT after hysterectomy was associated with worse survival endpoints. Our data suggest that shorter time interval between hysterectomy and start of RT may be beneficial.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Characterization of the Wymark CO2 Reservoir: A Natural Analog to Long-Term CO2 Storage at Weyburn

Natural accumulations of CO{sub 2} occur in the Duperow and other Devonian strata on the western flank of the Williston Basin in lithologies very similar to those into which anthropogenic CO{sub 2} is being injected as part of an EOR program in the Weyburn-Midale pool. Previous workers have established the stratgraphic and petrographic similarities between the Duperow and Midale beds (Lake and Whittaker, 2004 and 2006). As the CO{sub 2} accumulations in the Devonian strata may be as old as 50 Ma, this similarity provides confidence in the efficacy of long-term geologic sequestration of CO{sub 2} in the Midale-Weyburn pool. Here we attempt to extend this comparison with whole rock and mineral chemistry using the same sample suite used by Lake and Whittaker. We provide XRD, XRF, and electron microprobe analysis of major constituent minerals along with extensive backscattered electron and x-ray imaging to identify trace phases and silicate minerals. LPNORM analysis is used to quantify modal concentrations of minerals species. Samples from depth intervals where CO{sub 2} has been observed are compared to those where CO{sub 2} was absent, with no systematic differences in mineral composition observed. Gas accumulation can be correlated with sample porosity. In particular gas-bearing samples from the Eastend region are more porous than the overlying gas-free samples. Silicate minerals are rare in the Duperow carbonates, never exceeding 3 wt%. As such, mineral trapping is precluded in these lithologies. The geochemical data presented here will be used for comparison with a similar geochemical-mineralogical study of the Midale (Durocher et al., 2003) in a subsequent report.

58 GEOSCIENCES↗

Technical Note: Introduction of variance component analysis to setup error analysis in radiotherapy

Purpose: The purpose of this technical note is to introduce variance component analysis to the estimation of systematic and random components in setup error of radiotherapy. Methods: Balanced data according to the one-factor random effect model were assumed. Results: Analysis-of-variance (ANOVA)-based computation was applied to estimate the values and their confidence intervals (CIs) for systematic and random errors and the population mean of setup errors. The conventional method overestimates systematic error, especially in hypofractionated settings. The CI for systematic error becomes much wider than that for random error. The ANOVA-based estimation can be extended to a multifactor model considering multiple causes of setup errors (e.g., interpatient, interfraction, and intrafraction). Conclusions: Variance component analysis may lead to novel applications to setup error analysis in radiotherapy.

60 APPLIED LIFE SCIENCES↗

Adjuvant Radiation Therapy Treatment Time Impacts Overall Survival in Gastric Cancer

Purpose: Prolonged radiation therapy treatment time (RTT) is associated with worse survival in several tumor types. This study investigated whether delays during adjuvant radiation therapy impact overall survival (OS) in gastric cancer. Methods and Materials: The National Cancer Data Base was queried for patients with resected gastric cancer who received adjuvant radiation therapy with National Comprehensive Cancer Network–recommended doses (45 or 50.4 Gy) between 1998 and 2006. RTT was classified as standard (45 Gy: 33-36 days, 50.4 Gy: 38-41 days) or prolonged (45 Gy: >36 days, 50.4 Gy: >41 days). Cox proportional hazards models evaluated the association between the following factors and OS: RTT, interval from surgery to radiation therapy initiation, interval from surgery to radiation therapy completion, radiation therapy dose, demographic/pathologic and operative factors, and other elements of adjuvant multimodality therapy. Results: Of 1591 patients, RTT was delayed in 732 (46%). Factors associated with prolonged RTT were non-private health insurance (OR 1.3, P=.005) and treatment at non-academic facilities (OR 1.2, P=.045). Median OS and 5-year actuarial survival were significantly worse in patients with prolonged RTT compared with standard RTT (36 vs 51 months, P=.001; 39 vs 47%, P=.005); OS worsened with each cumulative week of delay (P<.0004). On multivariable analysis, prolonged RTT was associated with inferior OS (hazard ratio 1.2, P=.002); the intervals from surgery to radiation therapy initiation or completion were not. Prolonged RTT was particularly detrimental in patients with node positivity, inadequate nodal staging (<15 nodes examined), and those undergoing a cycle of chemotherapy before chemoradiation therapy. Conclusions: Delays during adjuvant radiation therapy appear to negatively impact survival in gastric cancer. Efforts to minimize cumulative interruptions to <7 days should be considered.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Start-Up and Dynamic Modeling of the Multilevel Modular Capacitor-Clamped Converter

This paper will present the analytical proof of concept of the multilevel modular capacitor-clamped converter (MMCCC). The quantitative analysis of the charge transfer mechanism among the capacitors of the MMCCC explains the start-up and steady-state voltage balancing. Once these capacitor voltages are found for different time intervals, the start-up and steady-state voltages at various nodes of the MMCCC can be obtained. This analysis provides the necessary proof that explains the stable operation of the converter when a load is connected to the low-voltage side of the circuit. In addition, the analysis also shows how the LV side of the converter is (1/N)th of the HV side excitation when the conversion ratio of the circuit is N. In addition to the analytical and simulation results, experimental results are included to support the analytical proof of concept.

99 GENERAL AND MISCELLANEOUS↗

Residual Tumor After Neoadjuvant Chemoradiation Outside the Radiation Therapy Target Volume: A New Prognostic Factor for Survival in Esophageal Cancer

Purpose/Objective(s): The aim of this study was to analyze the accuracy of gross tumor volume (GTV) delineation and clinical target volume (CTV) margins for neoadjuvant chemoradiation therapy (neo-CRT) in esophageal carcinoma at pathologic examination and to determine the impact on survival. Methods and Materials: The study population consisted of 63 esophageal cancer patients treated with neo-CRT. GTV and CTV borders were demarcated in situ during surgery on the esophagus, using anatomical reference points to provide accurate information regarding tumor location at pathologic evaluation. To identify prognostic factors for disease-free survival (DFS) and overall survival (OS), a Cox regression analysis was performed. Results: After resection, macroscopic residual tumor was found outside the GTV in 7 patients (11%). Microscopic residual tumor was located outside the CTV in 9 patients (14%). The median follow-up was 15.6 months. With multivariate analysis, only microscopic tumor outside the CTV (hazard ratio [HR], 4.96; 95% confidence interval [CI], 1.03-15.36), and perineural growth (HR, 5.77; 95% CI, 1.27-26.13) were identified as independent prognostic factors for OS. The 1-year OS was 20% for patients with tumor outside the CTV and 86% for those without (P<.01). For DFS, microscopic tumor outside the CTV (HR, 5.92; 95% CI, 1.89-18.54) and ypN+ (HR, 3.36; 95% CI, 1.33-8.48) were identified as independent adverse prognostic factors. The 1-year DFS was 23% versus 77% for patients with or without tumor outside the CTV (P<.01). Conclusions: Microscopic tumor outside the CTV is associated with markedly worse OS after neo-CRT. This may either stress the importance of accurate tumor delineation or reflect aggressive tumor behavior requiring new adjuvant treatment modalities.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

SURFACE EXOSURE TIMESCALES OF APOLLO CORE SAMPLE 73002 SPACE WEATHERED GRAINS

Introduction: Space weathering causes the surface regolith on airless bodies like the Moon to be morphologically, microstructurally, and chemically altered due to micrometeoroid bombardment and solar wind irradiation[1]. These processes produce a multitude of microstructural and chemical changes in individual soil grains that accumulate as grains are exposed on the surface over time. One microstructural feature produced by exposure to the solar wind is the development of ion-damaged rims on regolith grains via H+ and He+ ion irradiation. Also present are solar energetic particle (SEP) tracks, which are nanoscale lineations of ionization damage within grain interiors formed by high energy solar flare ions(primarily Fe group nuclei) which penetrate millimeters below the surface [2]. Recent work has confirmed that the thickness of solar wind-damaged amorphous rims on anorthite grains, nanocrystalline rims on olivine grains, and their respective SEP track densities are correlated with their surface exposure ages [3].Core sample 73002, recently released under the Apollo Next Generation Sample Analysis (ANGSA) Program, has provided an opportunity to study material collected from the light mantle formation during Apollo 17. The light mantle is thought to have been deposited via a landslide originating from the neighboring South Massif [4]. Spectral profiles and ferromagnetic resonance measurements of bulk soils sampled at cm-intervals from 73002 indicate the existence of mature regolith extending ~8 cm below the surface, suggesting the presence of an in-situ reworking zone in the core[5,6].Here we present the distribution of SEP track densities, solar wind damaged rim widths, and the corresponding surface exposure ages of grains residing in the proposed in-situ reworking zone of core 73002. Methods: Bulk samples of regolith from the first eight intervals and every following fourth interval down the core (dissection Pass 2) were delivered to Purdue University as <45 μm size fractions. The first eight0.5 cm intervals, representing the top 4cmof regolith, were individually dry sieved to a<20 μm size fraction, and grains were prepared by ultramicrotomy for analysis in the scanning transmission electron microscope (STEM). Bright field (BF) and dark field (DF) STEM images of solar flare tracks and solar wind damaged rims were acquired on a JEOL 2500SE TEM, equipped with a 60 mm2ultra-thin window silicon drift energy dispersive X-ray (EDX) spectrometer at NASA John-son Space Center. Grain compositions were determined by EDX compositional spectrum imaging. SEP track densities and amorphous rim thicknesses were measured on BF and DF images. Results: The fraction of grains with discernable space weathering features decreased with depth, with 100% in the first interval exhibiting space weathering features as opposed to ~60% in Interval 8.BF and DF STEM images show splash-melt and vapor deposited rims on outermost grain margins with embedded Fe-bearing nanoparticles ranging in size up to ~10 nm in diameter. Images also show solar-wind damaged rims below the vapor deposits, and SEP tracks present in grain interiors. The rim thicknesses and SEP track densities were determined using the methods of [3] for 54grains spanning the top 4 cm. ~80% of the grains analyzed were anorthite and ~20% were olivine. The track production rate from[3] was used to estimate the surface exposure times of the grains in this study. The majority of exposure times are in the 1 -5 MY range for all intervals. The lowest value was 3.8x 10¬5years in Interval 8and the highest value was1.1x 107years in Interval 6. Grains with the highest solar wind damage rim thicknesses and SEP track densities are found in Interval 6.The highest rim thickness and track density observed for anorthiteis126.5 nm and4.7 x 1011tracks/cm2, while for olivine they are 98.6 nm and 1.83 x 1011tracks/cm2, respectively. Discussion: Intervals from the top 4 cm of 73002 show similar SEP track density and solar wind damaged rim thickness distributions. Spectral and ferromagnetic resonance measurements of 73002 indicate an in-situ reworking zone up to~8 cm below the surface[5,6].The depth analyzed in this work is within the core’s uppermost in-situ reworking zone and may serve as an explanation to the homogenous distribution of exposure ages. The decreasing abundance of space weathered features with depth is consistent with regolith mixing models showing an exponential decay in regolith maturity with depth over time[7].A maximum surface exposure age determined via SEP track density is approximately 10million years. This timescale is consistent with the lower estimate of surface exposure ages of the light mantle determined in previous studies, which can range from 10s to over 100 Ma [4].It also falls within the core regolith reworking development timescale of ~17 Ma [5,6]. Additional analysis will be performed for a further seven intervals in 73002.

J A McFadden↗

Quantification of model error via an interval model with nonparametric error bound

The quantification of model uncertainty is becoming increasingly important as robust control is an important tool for control system design and analysis. This paper presents an algorithm that effectively characterizes the model uncertainty in terms of parametric and nonparametric uncertainties. The algorithm utilizes the frequency domain model error which is estimated from the spectra of output error and input data. The parametric uncertainty is represented as an interval transfer function while the nonparametric uncertainty is bounded by a designed error bound transfer function. Both discrete and continuous systems are discussed in this paper. The algorithm is applied to the Mini-Mast example, and the detail analysis is given.

Lew, Jiann-Shiun↗

Cosmological neutrino mass: a frequentist overview in light of DESI

We derive constraints on the neutrino mass using a variety of recent cosmological datasets, including DESI BAO, the full-shape analysis of the DESI matter power spectrum and the one-dimensional power spectrum of the Lyman-α forest (P1D) from eBOSS quasars as well as the cosmic microwave background (CMB). The constraints are obtained in the frequentist formalism by constructing profile likelihoods and applying the Feldman-Cousins prescription to compute confidence intervals. This method avoids potential prior and volume effects that may arise in a comparable Bayesian analysis. Parabolic fits to the profiles allow one to distinguish changes in the upper limits from variations in the constraining power σ of the different data combinations. We find that all profiles in the ΛCDM model are cut off by the ∑m ν ≥ 0 bound, meaning that the corresponding parabolas reach their minimum in the unphysical sector. The most stringent 95% C.L. upper limit is obtained by the combination of DESI DR2 BAO, Planck PR4 and CMB lensing at 53 meV, below the minimum of 59 meV set by the normal ordering. The corresponding constraining power σ is 43 meV, which highlights the importance of the cut-off by negative values in the determination of the upper limit. Extending ΛCDM to non-zero curvature and w 0 w a CDM relaxes the constraints past 59 meV again, but only w 0 w a CDM exhibits profiles with a minimum at a positive value. Additionally, we extend the formalism to constrain the lightest neutrino mass. For DESI DR2 BAO, Planck PR4 and CMB lensing, we find confidence limits at 20 and 19 meV for normal and inverted ordering, respectively. Using a combination of DESI DR1 full-shape, BBN and eBOSS Lyman-α P1D, we successfully constrain the neutrino mass independently of the CMB. This combination yields m l ≤ 97 and 98 meV in the normal and inverted orderings, and total neutrino mass ∑m ν ≤ 285 meV (95% C.L.). The addition of DESI full-shape or Lyman-α P1D to CMB and DESI BAO results in small but noticeable improvement of the constraining power of the data. Lyman-α free-streaming measurements especially improve the constraint. Since they are based on eBOSS data, this sets a promising precedent for upcoming DESI data.

Frequentist statistics↗

Integrated Markov Chain Monte Carlo (MCMC) analysis of primordial non-Gaussianity (f{sub NL}) in the recent CMB data

We have made a Markov Chain Monte Carlo (MCMC) analysis of primordial non-Gaussianity (f{sub NL}) using the WMAP bispectrum and power spectrum. In our analysis, we have simultaneously constrained f{sub NL} and cosmological parameters so that the uncertainties of cosmological parameters can properly propagate into the f{sub NL} estimation. Investigating the parameter likelihoods deduced from MCMC samples, we find slight deviation from Gaussian shape, which makes a Fisher matrix estimation less accurate. Therefore, we have estimated the confidence interval of f{sub NL} by exploring the parameter likelihood without using the Fisher matrix. We find that the best-fit values of our analysis make a good agreement with other results, but the confidence interval is slightly different.

79 ASTRONOMY AND ASTROPHYSICS↗

Functional Data Analysis in NTCP Modeling: A New Method to Explore the Radiation Dose-Volume Effects

Purpose/Objective(s): To describe a novel method to explore radiation dose-volume effects. Functional data analysis is used to investigate the information contained in differential dose-volume histograms. The method is applied to the normal tissue complication probability modeling of rectal bleeding (RB) for patients irradiated in the prostatic bed by 3-dimensional conformal radiation therapy. Methods and Materials: Kernel density estimation was used to estimate the individual probability density functions from each of the 141 rectum differential dose-volume histograms. Functional principal component analysis was performed on the estimated probability density functions to explore the variation modes in the dose distribution. The functional principal components were then tested for association with RB using logistic regression adapted to functional covariates (FLR). For comparison, 3 other normal tissue complication probability models were considered: the Lyman-Kutcher-Burman model, logistic model based on standard dosimetric parameters (LM), and logistic model based on multivariate principal component analysis (PCA). Results: The incidence rate of grade ≥2 RB was 14%. V{sub 65Gy} was the most predictive factor for the LM (P=.058). The best fit for the Lyman-Kutcher-Burman model was obtained with n=0.12, m = 0.17, and TD50 = 72.6 Gy. In PCA and FLR, the components that describe the interdependence between the relative volumes exposed at intermediate and high doses were the most correlated to the complication. The FLR parameter function leads to a better understanding of the volume effect by including the treatment specificity in the delivered mechanistic information. For RB grade ≥2, patients with advanced age are significantly at risk (odds ratio, 1.123; 95% confidence interval, 1.03-1.22), and the fits of the LM, PCA, and functional principal component analysis models are significantly improved by including this clinical factor. Conclusion: Functional data analysis provides an attractive method for flexibly estimating the dose-volume effect for normal tissues in external radiation therapy.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Methods of periodicity analysis - Relationship between the Rayleigh analysis and a maximum likelihood method

For periodicity analysis of occurrence rates of discrete events, one can use the maximum likelihood method or the 'Rayleigh analysis'. In a maximum likelihood analysis using a sinusoidal distribution, one tries various values of amplitude A and phase angle Theta(0) of the distribution function. We show that these two methods are essentially equivalent to one another in spite of their different mathematical origins. Using the Rayleigh analysis, therefore, we can simply calculate A and Theta(0) which maximize the likelihood. Using the cumulative nature of the logarithmic likelihood, we can identify time intervals during which the periodicity is in operation. When a periodicity operates only in certain time intervals, it is important to identify these intervals. Mathematically, the above technique is applicable only to discrete events. However, with slight modifications we can apply this technique to general cases - periodicity analysis of measurements of continuously varying quantities.

Bai, T.↗

A cross-sectional study of the temporal evolution of electricity consumption of six commercial buildings

Current approaches to building efficiency diagnoses include conventional energy audit techniques that can be expensive and time consuming. In contrast, virtual energy audits of readily available 15-minute-interval building electricity consumption are being explored to provide quick, inexpensive, and useful insights into building operation characteristics. A cross sectional analysis of six buildings in two different climate zones provides methods for data cleaning, population-based building comparisons, and relationships (correlations) of weather and electricity consumption. Data cleaning methods have been developed to categorize and appropriately filter or correct anomalous data including outliers, missing data, and erroneous values (resulting in < 0.5% anomalies). The utility of a cross-sectional analysis of a sample set of building's electricity consumption is found through comparisons of baseload, daily consumption variance, and energy use intensity. Correlations of weather and electricity consumption 15-minute interval datasets show important relationships for the heating and cooling seasons using computed correlations of a Time-Specific-Averaged- Ordered Variable (exterior temperature) and corresponding averaged variables (electricity consumption)(TSAOV method). The TSAOV method is unique as it introduces time of day as a third variable while also minimizing randomness in both correlated variables through averaging. This study found that many of the pair-wise linear correlation analyses lacked strong relationships, prompting the development of the new TSAOV method to uncover the causal relationship between electricity and weather. We conclude that a combination of varied HVAC system operations, building thermal mass, plug load use, and building set point temperatures are likely responsible for the poor correlations in the prior studies, while the correlation of time-specific-averaged-ordered temperature and corresponding averaged variables method developed herein adequately accounts for these issues and enables discovery of strong linear pair-wise correlation R values. TSAOV correlations lay the foundation for a new approach to building studies, that mitigates plug load interferences and identifies more accurate insights into weather-energy relationship for all building types. Over all six buildings analyzed the TSAOV method reported very significant average correlations per building of 0.94 to 0.82 in magnitude. Our rigorous statistics-based methods applied to 15- minute-interval electricity data further enables virtual energy audits of buildings to quickly and inexpensively inform energy savings measures.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Drivers, trends, and potential impacts of long-term coastal reclamation in China from 1985 to 2010

Driven by rapid economic development, population growth, and urbanization, China has experienced severe coastal land reclamation over the last decades, which resulted in significant loss of coastal wetland and wildlife habitat, and degradation of marine ecosystems. This study used advanced remote-sensing techniques to analyze the spatial and temporal distributions of coastal reclamation in China and investigated the relationships between coastal land reclamation and coastal economy, population growth, and urbanization. Analysis of long-term Landsat images time series from 1985 to 2010 in 5-year intervals, in combination with remotely sensed image techniques, indicated a sharp increasing trend of land reclamation after 2005, which accounted for over 35% of China’s total reclamation during the 25-year period since 1985. High-intensity coastal reclamation in China was mainly driven by the booming economy associated with urbanization and industrial development in the coastal region. Analysis indicated that coastal land reclamation is closely correlated with the GDP per capita in China. Study results of Landsat images showed that 754,697 ha of coastal wetlands have been reclaimed across all coastal provinces and metropolises from 1985 to 2010, at an annual rate of 5.9%. Coastal areas within the three major economic zones (Bohai Bay, Yangtze River Delta, and Pearl River Delta) were found to generally have higher reclamation rates. For example, the built-up area in Shanghai, which is located in the Yangtze River Delta, increased more than five times from 1985 to 2010. Approximately 35% of the reclamation occurred in Bohai Bay, in which the CRI between 2005 and 2010 was three times higher than the average CRI over the 25-year period.

54 ENVIRONMENTAL SCIENCES↗

Analysis of H-alpha flare spectra

Spectrographs of the H-alpha line taken at 15 second intervals from the event of 5 Sept. 1973 were interpreted by comparison with synthetic profiles. A sequence of 27 high resolution H alpha profiles was obtained from the second brightest flare kernel. The profiles were generally self reversed with a maximum peak intensity of 1.16 x continuum and a maximum central intensity of .91 x continuum. The line characteristics such as red and violet peak intensities and positions, center shifts and wing intensities were tabulated. Synthetic H-alpha profiles were generated from a finite layer assuming simple parameteric forms for the source function and velocity field. The velocity chosen always decreased with optical depth and had the same sign. For absorption profiles, bisector shifts were calculated for a variety of velocities. The velocity field and source function were derived as a function of optical depth and time.

Kulander, J. L.↗