Search NASA⌕ Search

SEARCH · Search NASA

Results for “ionic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Li 2 GeS 3 : Lithium Ionic Conductor with an Unprecedented Structural Type

Lithium-ion batteries (LIBs) are widely used in electric vehicles, mobile electronic devices, and large-scale stationary energy storage systems. However, their liquid electrolytes present significant safety concerns due to their inherent flammability. To address this, the focus has shifted toward all-solid-state batteries (ASSBs) utilizing inorganic solid electrolytes that promise enhanced safety. In this work, we report the discovery of a new crystal structural type of Li-ion conductor, Li 2 GeS 3 , with a unique structure, synthesized by a solid-state reaction from Li 2 S and GeS 2 . It was first reported in 2000 with an orthorhombic unit cell, but its detailed crystal structure remains veiled. Here, we have unveiled its structure for the first time, employing an ab initio structure determination technique from powder X-ray and time-of-flight neutron diffraction data. The compound has an unprecedented crystal structural type with a hexagonal $P6_1$ symmetry and a unit cell of α = 6.79364(4) Å and c = 17.90724(14) Å. Its structure is comprised of a distorted hexagonal close-packed arrangement of sulfur anions with three asymmetric metal atoms: Li1, Li2, and Ge are in tetrahedral cavities surrounded by sulfur atoms. The ionic conductivity of Li 2 GeS 3 was measured to be 1.63 × 10 –8 S cm –1 at 303 K and 2.45 × 10 –7 S cm –1 at 383 K. Bond valence energy landscape calculations revealed three-dimensional lithium diffusion pathways within the structure. This novel crystal structure in Li 2 GeS 3 holds the potential for developing high-performance ionic conductors through suitable chemical substitution and offers valuable insights into designing new ionic conductors for ASSBs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparison of Hydrogels Prepared with Ionic-Liquid-Isolated vs Commercial Chitin and Cellulose

Physical and/or covalently linked (chemical) hydrogels were prepared from chitin and cellulose extracted with ionic liquid from shrimp shells and wood biomass, respectively, and compared with hydrogels prepared from commercially available biopolymers, practical grade chitin, and microcrystalline cellulose. The highly porous aerogels were formed by initial dissolution of the biopolymers in NaOH/urea aqueous systems using freeze/thaw cycles, followed by thermal treatment (with or without epichlorohydrin as a cross-linker) and supercritical CO 2 drying. The ionic-liquid-extracted cellulose pulp and chitin, as well as practical grade chitin could form both stable physical and chemical hydrogels, whereas biopolymers of lower apparent molecular weight such as microcrystalline cellulose required a covalent cross-linker for hydrogel formation and commercially available pure chitin was not suitable for the preparation of hydrogels of either type. Hydrogels prepared from the ionic-liquid- extracted biopolymers exhibited properties substantially different from those made from the commercially available biopolymers. As a result, loading of an active ingredient into the hydrogel and its subsequent release was demonstrated using indigo carmine and revealed that the release rate was controlled mainly by the biopolymer concentration of the gel network.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamics of electrical double layer formation in room-temperature ionic liquids under constant-current charging conditions

We report detailed simulation results on the formation dynamics of an electrical double layer (EDL) inside an electrochemical cell featuring room-temperature ionic liquids (RTILs) enclosed between two planar electrodes. Under relatively small charging currents, the evolution of cell potential during charging can be suitably predicted by the Landau-Ginzburg-type continuum model proposed recently (M. Z. Bazant, B. D. Storey, and A. A. Kornyshev, Phys. Rev. Lett., 106, 046102, 2011). Under very large charging currents, the cell potential shows pronounced oscillation during the initial stage of charging, a feature not captured by the continuum model. Such oscillation originates from the sequential growth of the ionic space charge layers near the electrode surface, allowing the evolution of EDLs in RTILs with time, an atomistic process difficult to visualize experimentally, to be studied by analyzing the cell potential under constant current charging conditions. While the continuum model cannot predict the potential oscillation under such far-from-equilibrium charging conditions, it can nevertheless qualitatively capture the growth of cell potential during the later stage of charging. Furthermore, improving the continuum model by introducing frequency-dependent dielectric constant and density-dependent ion diffusion coefficients may help to further extend the applicability of the model. Keywords: ionic

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Charge Transport and Phase Behavior of Imidazolium-Based Ionic Liquid Crystals from Fully Atomistic Simulations

Ionic liquid crystals occupy an intriguing middle ground between room-temperature ionic liquids and mesostructured liquid crystals. Here, we examine a non-polarizable, fully atomistic model of the 1-alkyl-3-methylimidazolium nitrate family using molecular dynamics in the constant pressure–constant temperature ensemble. These materials exhibit a distinct “smectic” liquid phase, characterized by layers formed by the molecules, which separate the ionic and aliphatic moieties. In particular, we discuss the implications this layering may have for electrolyte applications.

36 MATERIALS SCIENCE↗

Solvent extraction of Sr2+ and Cs+ using protic amide-based ionic liquids

Sixteen protic amide-based ionic liquids (ILs) derived from N,N-dimethylformamide and other protophilic amide derivatives with bis(trifluoromethanesulfonyl)imide or bis(perfluoroethylsulfonyl)imide as conjugated anions were synthesized in a one-pot reaction with very high yields. All sixteen of these protic ionic liquids (PILs) were characterized by NMR spectra, thermogravimetric analysis, and differential scanning calorimetry. These protic amide-based ionic liquids were tested as extraction solvents using dicyclohexano-18-crown-6 (DCH18C6) as an extractant for separation of Sr2+ and Cs+ from aqueous solutions. The extraction efficiencies were studied in comparison with those derived from both imidazolium-based and ammonium-based IL extraction systems. Excellent extraction efficiencies were found for a number of these ILs using DCH18C6 as an extractant. Unlike findings for imidazolium-based and ammonium-based ILs, the observed enhancement trend for the extraction efficiency associated with our amide-based ILs is not directly correlated with the enhanced hydrophilicity of the corresponding cations of the PIL system. The effects on extraction efficiencies of solution acidities, anions, and alkyl chain lengths in the cations of ILs were also investigated and reported.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Strain tuning and strong enhancement of ionic conductivity in SrZrO 3 -RE 2 O 3 (RE = Sm, Eu, Gd, Dy, and Er) nanocomposite films

Fast ion transport channels at interfaces in thin films have attracted great attention due to a range of potential applications for energy materials and devices, for, solid oxide fuel cells, sensors, and memories. Here, it is shown that in vertical nanocomposite heteroepitaxial films of SrZrO 3 –RE 2 O 3 (RE = Sm, Eu, Gd, Dy, and Er) the ionic conductivity of the composite can be tuned and strongly enhanced using embedded, stiff, and vertical nanopillars of RE 2 O 3 . With increasing lattice constant of RE 2 O 3 from Er 2 O 3 to Sm 2 O 3 , it is found that the tensile strain in the SrZrO 3 increases proportionately, and the ionic conductivity of the composite increases accordingly, by an order of magnitude. Lastly, the results here conclusively show, for the first time, that strain in films can be effectively used to tune the ionic conductivity of the materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ionic Liquid Analogs of AlCl 3 with Urea Derivatives as Electrolytes for Aluminum Batteries

The ionic liquid analog, formed through the mixture of urea and AlCl 3 , has previously shown to serve as a low-cost electrolyte for an aluminum-graphite battery, while maintaining good performance and achieving high Coulombic efficiency. Undesirable are the relatively high viscosity and low conductivity of this electrolyte, when compared to chloroaluminate ionic liquids with organic cations. Here, the fundamental changes to the electrolyte resulting from using derivatives of urea (N-methyl urea and N-ethyl urea), again mixed with AlCl 3 , are examined. These electrolytes are shown to have significantly lower viscosities (η = 45, 67, and 133 cP when using N-ethyl urea, N-methyl urea, and urea, respectively, at 25 °C). The associated batteries exhibit higher intrinsic discharge voltages (2.04 and 2.08 V for N-methyl urea and N-ethyl urea electrolytes, respectively, vs 1.95 V for urea system@100 mA g -1 specific current for ≈5 mg cm -2 loading), due to changes in concentrations of ionic species. Furthermore, aluminum deposition is directly observed to primarily occur through reduction of Al 2 Cl 7 - when AlCl 3 is present in excess, in contrast to previously suggested cationic Al-containing species, via operando Raman spectroscopy performed during cyclic voltammetry.

25 ENERGY STORAGE↗

Synthesis of Ionic Ultramicroporous Polymers for Selective Separation of Acetylene from Ethylene

The design of highly stable and efficient porous materials is essential for developing breakthrough hydrocarbon separation methods based on physisorption to replace currently used energy-intensive distillation/absorption technologies. Efforts to develop advanced porous materials such as zeolites, coordination frameworks, and organic polymers have met with limited success. Here, a new class of ionic ultramicroporous polymers (IUPs) with high-density inorganic anions and narrowly distributed ultramicroporosity is reported, which are synthesized by a facile free-radical polymerization using branched and amphiphilic ionic compounds as reactive monomers. A covalent and ionic dual-crosslinking strategy is proposed to manipulate the pore structure of amorphous polymers at the ultramicroporous scale. The IUPs exhibit exceptional selectivity (286.1–474.4) for separating acetylene from ethylene along with high thermal and water stability, collaboratively demonstrated by gas adsorption isotherms and experimental breakthrough curves. Modeling studies unveil the specific binding sites for acetylene capture as well as the interconnected ultramicroporosity for size sieving. Finally, the porosity-engineering protocol used in this work can also be extended to the design of other ultramicroporous materials for the challenging separation of other key gas constituents.

36 MATERIALS SCIENCE↗

Ionic Modulation at the LaAlO 3 /KTaO 3 Interface for Extreme High-Mobility Two-Dimensional Electron Gas

Due to the coexistence of many emergent phenomena, including 2D superconductivity and a large Rashba spin-orbit coupling, 5d transition metal oxides-based two-dimensional electron systems (2DESs) have been prospected as one of the potential intrants for modern electronics. However, despite the lighter electron mass, the mobility of carriers, a key requisite for high-performance devices, in 5d-oxides devices remains far behind their 3d-oxides analogs. The carriers’ mobility in these oxides is significantly hampered by the inevitable presence of defects. Here, in this study, very high mobility (≈22 650 cm 2 V –1 s –1 ) of 5d-2DES confined at the LaAlO 3 /KTaO 3 interface is reported. The high mobility, which is beyond the values observed in SrTiO 3 2DESs in the same carrier-density range, is achieved using the ionic-liquid gating at room temperature. The authors postulate that the ionic-liquid gating affects the oxygen vacancies and efficiently reduces any disorder at the interface. Investigating density and mobility in a broad range of back-gate voltage, the authors reveal that the mobility follows the power-law µ ∝ n 1.2 , indicating the very high quality of ionic-liquid-gated LaAlO 3 /KTaO 3 devices, consistent with the postulate. Furthermore, the analysis of the quantum oscillations confirms that the high-mobility electrons occupy the electronic sub-bands emerging from the Ta:5d orbitals of KTaO 3 .

36 MATERIALS SCIENCE↗

Ionically Conductive Self-Healing Binder for Low Cost Si Microparticles Anodes in Li-Ion Batteries

A self-healing polymer (SHP) with abundant hydrogen bonds, appropriate viscoelasticity, and stretchability is a promising binder to improve cycle performance of Si microparticle anodes in lithium (Li) ion batteries. Besides high capacity and long cycle life, efficient rate performance is strongly desirable for practical Si anode implementation. Here in this paper, polyethylene glycol (PEG) groups are incorporated into the SHP, facilitating Li ionic conduction within the binder. The concept of the SHP-PEG binder involves improving the interface between Si microparticles and electrolytes after cycling based on the combination of self-healing ability and fast Li ionic conduction. Through the systematic study of mixing PEG M w and ratio, the polymeric binder combining SHP and PEG with Mw 750 in an optimal ratio of 60:40 (mol%) achieves a high discharging capacity of ≈2600 mA h g -1 , reasonable rate performance especially when >1C and maintains 80% of their initial capacity even after ≈150 cycles at 0.5C. The described concept for the polymeric binder, embedding both self-healing ability and high Li ionic conductivity, should be equally useful for next generation batteries utilizing high capacity materials which suffer from huge volume change during cycling.

25 ENERGY STORAGE↗

Mechanisms of Alkali Ionic Transport in Amorphous Oxyhalides Solid State Conductors

Amorphous oxyhalides have attracted significant attention due to their relatively high ionic conductivity (1 mS cm –1 ), excellent chemical stability, mechanical softness, and facile synthesis routes via standard solid‐state reactions. These materials exhibit an ionic conductivity that is almost independent of the underlying chemistry, in stark contrast to what occurs in crystalline conductors. In this work, we employ machine learning interatomic potentials to construct large‐scale molecular dynamics trajectories encompassing hundreds of nanoseconds to obtain statistically converged transport properties. We find that the amorphous state consists of chain fragments of metal‐anion tetrahedra of various lengths. By analyzing the residence time of alkali cations migrating around tetrahedrally‐coordinated metals, we find that oxygen anions limit alkali diffusion. By computing the full Einstein expression of the ionic conductivity, we demonstrate that the alkali transference number of these materials is strongly influenced by distinct‐particles correlations, while alkali transport is dictated by uncorrelated self‐diffusion. By extending this analysis to chemical compositions AMX 2.5 O 0.75 , spanning different alkaline (A = Li, Na, K), metallic (M = Al, Ga, In), and halogen (X = Cl, Br, I) species, we clarify why the diffusion properties of these materials remain largely insensitive to variations in atomic isovalent chemistry.

amorphous materials↗

A roadmap to uranium ionic liquids: Anti-crystal engineering

In the search for uranium-based ionic liquids, tris(N,N-dialkyldithiocarbamato)uranylates have been synthesized as salts of the 1-butyl-3-methylimidazolium (C 4 mim) cation. As dithiocarbamate ligands binding to the UO 2 2+ unit, tetra-, penta-, hexa-, and heptamethylenedithiocarbamates, N,N-diethyldithiocarbamate, N-methyl-N-propyldithiocarbamate, N-ethyl-N-propyldithiocarbamate, and N-methyl-N-butyldithiocarbamate have been explored. X-ray single-crystal diffraction allowed unambiguous structural characterization of all compounds except N-methyl-N-butyldithiocarbamate, which is obtained as a glassy material only. In addition, powder X-ray diffraction as well as vibrational and UV/Vis spectroscopy, supported by computational methods, were used to characterize the products. Differential scanning calorimetry was employed to investigate the phase-transition behavior depending on the N,N-dialkyldithiocarbamato ligand with the aim to establish structure–property relationships regarding the ionic liquid formation capability. Compounds with the least symmetric N,N-dialkyldithiocarbamato ligand and hence the least symmetric anions, tris(N-methyl-N-propyldithiocarbamato)uranylate, tris(N-ethyl-N-propyldithiocarbamato)uranylate, and tris(N-methyl-N-butyldithiocarbamato)uranylate, lead to the formation of (room-temperature) ionic liquids, which confirms that low-symmetry ions are indeed suitable to suppress crystallization. As a result, these materials combine low melting points, stable complex formation, and hydrophobicity and are therefore excellent candidates for nuclear fuel purification and recovery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sustainable Synthesis of NiMo Alloy Nanoparticles for Hydrogen Evolution Catalysis Using a Recyclable Ionic Liquid Solvent

Advancing the sustainability of nanoparticle electrocatalyst synthesis requires reducing solvent waste without compromising catalytic performance. Here, we report a rapid, microwave‐assisted colloidal synthesis of NiMo alloy nanoparticles in the ionic liquid 1‐butyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide (BMIM‐NTf 2 ), which serves as both reaction medium and recyclable solvent. NiMo nanoparticles with tunable compositions were obtained within 1 min at 230 °C, with Ni 0.86 Mo 0.14 giving the highest activity toward the hydrogen evolution reaction (HER), achieving an onset potential of −129 mV, an overpotential at 10 mA cm −2 of −290 mV versus RHE in acidic electrolyte, and >99% Faradaic efficiency. The ionic liquid was recovered and purified via aqueous NH 4 OH extraction, removing over 99% of residual Mo species, and reused for up to five successive syntheses. Nanoparticles prepared in recycled BMIM‐NTf 2 retained comparable crystallinity, morphology, and catalytic activity, with stable HER performance over 45 h of electrolysis. These results demonstrate that ionic liquid recycling can improve the sustainability of the preparation of NiMo nanoparticle electrocatalysts while preserving performance and material integrity.

bimetallic alloy↗

Ionic current in nanochannels grafted with pH-responsive polyelectrolyte brushes modeled using augmented strong stretching theory

Here, we provide a theory to quantify the ionic current (i ion ) in nanochannels grafted with pH-responsive polyelectrolyte (PE) brushes. We consider the PE brushes to be modelled by our recently proposed augmented strong stretching theory (SST) model that improves the existing SST models by incorporating the effects of excluded volume interactions and an extended mass action law. Use of such augmented SST for this problem implies that this is the first study on computing i ion in PE-brush-grafted nanochannels accounting for the appropriate coupled con guration-electrostatic description of the PE brushes. i ion is obtained as functions of PE brush grafting density, medium pH and salt concentration (c ∞ ), and the density of polyelectrolyte chargeable sites (PECS). For large c ∞ , i ion increases linearly with c ∞ (as for such c ∞ , i ion becomes independent of the PE charge and is dominated by the bulk mobility and number density of the electrolyte ions), while iion is independent of c ∞ at small c ∞ (where the EDL electrostatics and the total number of ions in the system is dominated by the hydrogen ions). We further witness an enhancement of i ion for smaller pH and larger grafting density at low and moderate c ∞ , while there is little to no effect of the PECS density on the ionic current except for weakly grafted brushes at low c ∞ . We believe that this study will serve as a theoretical foundation for a large number of applications that are based on the brush-induced modification of the ionic current in a nanochannel.

42 ENGINEERING↗

Polyimide-PEG Segmented Block Copolymer Membranes with High Proton Conductivity by Improving Bicontinuous Nanostructure of Ionic Liquid-Doped Films

The structure and properties of segmented block copolymer films of aromatic polyimide (PI) and poly(ethylene glycol) (PEG) doped with an ionic liquid are observed for potential polymer electrolyte membrane applications for fuel cells. Poly(amic acid) precursors of PI-PEG copolymers of 4,4'-(hexafluoroisopropylidene) diphthalic anhydride, 4,4'-(1,3-phenylenedioxy) dianiline, and bis(3-aminopropyl) terminated PEG (M n ≈ 1500) are synthesized and then thermally imidized in membrane films, followed by swelling in ethylammonium nitrate (EAN) ionic liquid. The small-angle X-ray scattering results from the EAN-doped PI-PEG copolymer films show disordered bicontinuous phase-separated nanostructures described by Teubner–Strey theory, with the interface fractal dimension determined from the Porod equation. Thermal annealing of the EAN-doped membranes at 100–140 °C results in increased correlation lengths and smoother interfaces of the bicontinuous nanostructures. Such improved nanostructures lead to the increased ionic conductivity by two to five times with the maximum conductivity of 210 mS cm -1 at 60 °C and 70% RH, much greater (nearly fivefold) than that of Nafion films, while maintaining the mechanical stability possibly up to 140 °C. Furthermore, the investigation of the disordered bicontinuous phase-separated nanostructure of EAN-doped PI-PEG copolymer membranes is highly relevant to understanding the nanostructures of hydrated Nafion membranes and segmented block copolymers in general.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ionic conductivity optimization of composite polymer electrolytes through filler particle chemical modification

The addition of filler particles to polymer electrolytes is known to increment their ionic conductivity (IC). A detailed understanding of how the interactions between the constituent materials are responsible for the enhancement remains to be developed. A significant contribution is ascribed to an increment of the polymer amorphous fraction, induced by the fillers, resulting in the formation of higher ionic conductivity channels in the polymer matrix. However, the dependence of IC on the particle weight load and its composition on the polymer morphology is not fully understood. This work investigates Li-ion transport in composite polymer electrolytes (CPE) comprising Bi-doped LLZO particles embedded in PEO:LiTFSI matrixes. We find that the IC optimizes for very low particle weight loads (5-10%) and that both its magnitude and the load are required, strongly dependent on the garnet particle composition. Based on structural characterization results and electrochemical impedance spectroscopy, a mechanism is proposed to explain these findings. It is suggested that the Li-molar content in the garnet particle controls its interactions with the polymer matrix, resulting at the optimum loads reported, in the formation of high ionic conductivity channels. We propose that filler particle chemical manipulation of the polymer morphology is a promising avenue for the further development of composite polymer electrolytes.

bismuth↗

More sustainable electricity generation in hot and dry fuel cells with a novel hybrid membrane of Nafion/nano-silica/hydroxyl ionic liquid

Here, a new hybrid proton exchange membrane (PEM) has been prepared from hydroxyl functionalized imidazolium ionic liquid (IL-OH), Nafion and nano-SiO 2 . The IL-OH, with a hydroxyl group that acts as both a proton acceptor and donor, forms strong hydrogen bonds with both Nafion and nano-SiO 2 , resulting in an effective hydrogen bond network in the ternary membrane. Such an anhydrous hydrogen-bond network, which is unknown previously, endows the PEMs with higher proton conductivity, greater thermal stability and surprisingly a more robust mechanical performance than PEMs consisting of conventional ionic liquids. The resulting PEMs have a tensile strength that is more than twice as strong as recast Nafion and an anhydrous ionic conductivity of ~55 mS cm –1 at temperatures above 160 °C, with a proton transfer number of ~0.9. A laboratory assembled H 2 –O 2 fuel cell employing this new PEM delivered a power density of 340 and 420 mW cm –2 at 160 and 180 °C, respectively.

25 ENERGY STORAGE↗

Numerical modeling and performance analysis of a membrane-based air dehumidifier using ionic liquid desiccant

Membrane-based Liquid Desiccant Air Dehumidifier (MLDAD) has the potential to overcome the shortcomings of the conventional open-tower liquid desiccant air dehumidifier. The MLDAD uses membranes with high water vapor permeability to separate air stream from the liquid desiccant and thus eliminates carry-over and the resulting corrosion issues. Recently, the ionic liquid desiccant becomes a promising alternative to conventional liquid desiccant. The ionic liquid desiccant has a large potential of dehumidification, which is also non-corrosive to metals and non-crystallizable. A two-dimensional numerical heat and mass transfer model of the MLDAD using a recently identified ionic liquid desiccant, [EMIM]OAc, is presented in this paper. We report this model can simulate the performance of the MLDAD with various designs, including different selections of liquid desiccant and membrane materials, dimensions of the MLDAD, and flow patterns. For porous membranes, this model accounts for several micro-scale mass transfer mechanisms of vapor transportation across the membrane. It can also model the mass transfer performance of dehumidifiers using non-porous membranes based on the experimentally measured membrane permeance. The numerical model was validated against the performance data available from literature and experimental tests. The maximum discrepancy of the latent effectiveness between the measured and the model-predicted results was about 6% when porous membranes were used. A parametric study was conducted with the numerical model. The results indicated that the membrane permeability, air path height, and solution to air mass ratio were the most critical parameters, determining the dehumidification performance of the MLDAD.

42 ENGINEERING↗