Search NASA⌕ Search

SEARCH · Search NASA

Results for “phase behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

In Situ Synchrotron X-ray Diffraction Investigations of the Nonlinear Deformation Behavior of a Low Modulus β -Type Ti36Nb5Zr Alloy

The low modulus β-type Ti alloys usually have peculiar deformation behaviors due to their low phase stability. However, the study of the underlying mechanisms is challenging since some physical mechanisms are fully reversible after the release of the load. In this paper, the deformation behavior of a low modulus β-type Ti36Nb5Zr alloy was investigated with the aid of in situ synchrotron X-ray diffraction (SXRD) during tensile loading. The evolution of lattice strains and relative integrated diffraction peak intensities of both the β and α” phases were analyzed to determine the characteristics of the potential deformation mechanisms. Upon loading, the α” diffraction spots appeared at specific azimuth angles of the two-dimensional SXRD patterns due to the <110> fiber texture of original β grains and the selection of favorable martensitic variants. The nonlinear deformation behavior originated from a reversible stress-induced martensitic transformation (SIMT). However, the SIMT contributed a little to the large recoverable strain of over 2.0%, which was dominated by the elastic deformation of the β phase. Various deformation mechanisms were activated successively at different applied strains, including elastic deformation, SIMT and plastic deformation. Our investigations provide in-depth understandings of the deformation mechanisms in β-type Ti alloys with low elastic modulus.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Identifying the fingerprints of topological states by tuning magnetoresistance in a semimetal: The case of topological half-Heusler Pt 1 - x Au x LuSb

We report that topological materials often exhibit remarkably linear nonsaturating magnetoresistance (LMR), which is both of scientific and technological importance. However, the role of topologically nontrivial states in the emergence of such a behavior has eluded clear demonstration in experiments. Here, by reducing the coupling between the topological surface states (TSS) and the bulk carriers, we controllably tune the LMR behavior in Pt 1-x Au x LuSb into distinct plateaus in Hall resistance, which we show arise from a quantum Hall phase. This allowed us to reveal how smearing of the Landau levels, which otherwise gives rise to a quantum Hall phase, results in an LMR behavior due to strong interaction between the TSS with a positive g factor and the bulk carriers. We establish that controlling the coupling strength between the surface and the bulk carriers in topological materials can bring about dramatic changes in their magnetotransport behavior. In addition, our work outlines a strategy to reveal macroscopic physical observables of TSS in compounds with a semimetallic bulk band structure, as is the case in multifunctional Heusler compounds, thereby opening up opportunities for their utilization in hybrid quantum structures.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Strengthening Mechanisms and Deformation Behavior of Industrially-Cast and Lab-Cast Dual-Phase High Entropy Alloy

An iron-rich high entropy alloy Al 0.65 CoCrFe 2 Ni comprising of both FCC and BCC phases was designed and fabricated using induction melting at a large industrial scale and suction casting at a small lab scale. Spinodally decomposed interdendritic regions were uniformly distributed in the industrially melted alloy, and a finer dendritic structure with smaller sized spinodal structures was observed in the alloy suction cast at lab scale. The suction cast alloy fabricated at the lab scale exhibited significantly higher compressive yield strength compared to the industrially cast alloy. The relative strengthening contributions in the alloys due to solid solution, grain boundary, dislocation interactions and interphase boundary were analyzed. Dislocation hardening was the major contributor responsible for the higher strength of the SC alloy. The deformation behavior in the alloys was examined with the help of orientation image mapping. Finally, intense slip band formation at large strains in the industrially melted alloy indicates that cold working can be an effective technique to enhance the strength of the dual-phase high entropy alloy processed at a large scale.

36 MATERIALS SCIENCE↗
DOE OSTI2024

FY-24 Progress on Computational Modeling of the Water Based NSTF

This report summarizes the computational modeling of the Natural Convection Shutdown Heat Removal Test Facility (NSTF) completed in FY24. This year’s modeling campaign focuses on the continual testing of the RELAP5 model against experimental data. Several fault cases were simulated with the RELAP5 model in FY23 to study the accuracy of the model under complex flow conditions. Similarly, in FY24, a case is simulated where the chimney outlet is throttled with a valve while the flow is undergoing two-phase oscillations. The purpose of this case is to study the effects of increasing pressure drop in the two-phase region on the system behavior. Even though the model is able to capture the experimental data qualitatively, it overpredicts the pressure drops experienced by the flow in the two-phase regime. Nevertheless, the model and the experiment show that oscillations are stabilized with increased pressure drop in the two-phase region.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Microstructural heterogeneities in additively manufactured refractory alloy C103 and their implications for room and elevated temperature mechanical behavior

Considering the vast component design space enabled by fusion-based additive manufacturing (F-BAM) processes, e.g., directed energy deposition (DED), the scale-up manufacturing of Nb-alloys with F-BAM is advantageous for structural applications. However, varying thermokinetic parameters-induced microstructural heterogeneities are prevalent within the F-BAM processed alloys. Such microstructural heterogeneities can have significant implications for the room and elevated temperature mechanical behavior. While a few studies investigating F-BAM processed alloy C103 are available, none of these studies investigate the microstructural heterogeneities – including those associated with solidification growth modes and second phase particles – and the effect thereof on the mechanical behavior. To this end, we investigate the microstructurally heterogeneous regions with varying solidification growth morphologies, segregation behavior, and second phase particle attributes within the laser-DED processed alloy C103. The implications of such heterogeneous regions for room- and elevated-temperature tensile behavior and damage mechanisms are revealed. Particularly, the interface between the cellular and planar region is identified as susceptible to deformation localization. The implications of hot isostatic pressing (HIP) for the consolidation behavior, microstructural evolution, and resulting mechanical behavior are also discussed. Although the recrystallization and grain growth led to a reduced yield strength in the HIPed condition, the homogenization of microstructure alleviated the deformation localization sites, such as the planar/cellular interface within the melt pool. The homogenized microstructure alongside the enhanced consolidation upon HIP led to an enhanced elongation to failure. Findings establish microstructural design considerations in F-BAM processed Nb alloys and also facilitate design of post-processing heat treatments for achieving improved mechanical properties.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Quaternary i-MAX Phases (Mo 2/3 RE 1/3 ) 2 AlC (RE: Dy, Tb, Er): Experimental Characterization and First-Principles Insights into their Fundamental Properties

Rare earth (RE)-based materials have unique electronic, magnetic, and optical properties, leading to the recent discovery of atomically layered solids with the chemical formula (M' 2/3 RE 1/3 ) 2 AlC, which have since garnered significant attention in the scientific community. This study aims to synthesize, characterize, and investigate the structural and thermal stability of the RE i-MAX phases. We prepared i-MAX phases using molybdenum (Mo) as M′ and RE elements as Dy, Tb, and Er, namely (Mo 2/3 Dy 1/3 ) 2 AlC, (Mo 2/3 Tb 1/3 ) 2 AlC, and (Mo 2/3 Er 1/3 ) 2 AlC. Structural characterization through x-ray diffraction (XRD) and Raman spectroscopy confirms the formation of the RE-based i-MAX phase, along with the presence of minor impurity phases in the alloys. Thermogravimetric analysis (TGA) conducted up to 1000°C under ambient conditions reveals that the i-MAX phases remain thermally stable up to approximately 450°C, beyond which oxidation leads to a noticeable weight gain in all samples. Differential scanning calorimetry (DSC) measurements during heating and cooling cycles show endothermic and exothermic peaks for (Mo 2/3 Dy 1/3 ) 2 AlC i-MAX in the 410–420°C range, indicating a temperature-induced minor atomic arrangement. In contrast, these peaks are absent in the Tb- and Er-based i-MAX phases. These findings offer valuable insights into the thermal behavior and stability of these i-MAX phases under thermal stress, contributing to a deeper understanding of their unique properties. Furthermore, first-principles density functional theory (DFT) calculations were performed to investigate the electronic and optical properties of the i-MAX phases. The results reveal their metallic nature, with pronounced contributions from Mo and RE elements near the Fermi level and within the conduction band.

Rare earth↗
DOE OSTI2022

Simulation of convective transport during frequency chirping of a TAE using the MEGA code

Here, we present a procedure to examine energetic particle phase-space during long range frequency chirping phenomena in tokamak plasmas. To apply the proposed method, we have performed self-consistent simulations using the MEGA code and analyzed the simulation data. We demonstrate a traveling wave in phase-space and that there exist specific slices of phase-space on which the resonant particles lie throughout the wave evolution. For non-linear evolution of an n = 6 toroidicity-induced Alfvén eigenmode (TAE), our results reveal the formation of coherent phase-space structures (holes/clumps) after coarse-graining of the distribution function. These structures cause a convective transport in phase-space which implies a radial drift of the resonant particles. We also demonstrate that the rate of frequency chirping increases with the TAE damping rate. Our observations of the TAE behavior and the corresponding phase-space dynamics are consistent with the Berk–Breizman theory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Computing Thermodynamic Properties of Fluids Augmented by Nanoconfinement: Application to Pressurized Methane

Nanoconfined fluids exhibit remarkably different thermodynamic behavior compared to the bulk phase. These confinement effects render predictions of thermodynamic quantities of nanoconfined fluids challenging. In particular, confinement creates a spatially varying density profile near the wall that is primarily responsible for adsorption and capillary condensation behavior. Significant fluctuations in thermodynamic quantities, inherent in such nanoscale systems, coupled to strong fluid–wall interactions give rise to this near-wall density profile. Empirical models have been proposed to explain and model these effects, yet no first-principles based formulation has been developed. We present a statistical mechanics framework that embeds such a coupling to describe the effect of the fluid–wall interaction in amplifying the near-wall density behavior for compressible gases at elevated pressures such as pressurized methane in confinement. We show that the proposed theory predicts accurately the adsorbed layer thickness as obtained with small-angle neutron scattering measurements. Furthermore, the predictions of density under confinement from the proposed theory are shown to be in excellent agreement with available experimental and atomistic simulations data for a range of temperatures for nanoconfined methane. While the framework is presented for evaluating the near-wall density, owing to its rigorous foundation in statistical mechanics, the proposed theory can also be generalized for predicting phase-transition and nonequilibrium transport of nanoconfined fluids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Direct Laser Writing Crystal Polymorphs of Organic Semiconductors for Phase Change Electronics

The many diverse polymorphic behaviors observed in organic electronic materials offer opportunities to modulate electronic properties through reversibly switching crystal structures. Here, we access the prolific polymorphism observed in two-dimensional quinoidal terthiophene via laser writing to locally heat and direct the phase transitions. We access a metastable polymorph IV through rapid cooling and observe distinct symmetry as well as packing through grazing incidence X-ray diffraction (GIXD). Using our open-source PolyChemPrint patterning platform, we direct laser heating to initiate the IV-I transition, switching the conductance by >2 orders of magnitude. Here, this is confirmed via a combination of GIXD and Raman spectroscopy. Finally, we demonstrate switching of transistor devices as well as discrete tuning of conductance via laser writing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Infrared Signatures for Phase Identification in Hafnium Oxide Thin Films

Phase identification in HfO 2 -based thin films is a prerequisite to understanding the mechanisms stabilizing the ferroelectric phase in these materials, which hold great promise in next-generation non-volatile memory and computing technology. While grazing-incidence X-ray diffraction is commonly employed for this purpose, it has difficulty unambiguously differentiating between the ferroelectric phase and other metastable phases that may exist due to similarities in the d-spacings, their low intensities, and the overlapping of reflections. Infrared signatures provide an alternative route. However, their use in phase identification remains limited because phase control has overwhelmingly been accomplished via substituents, thereby convoluting infrared signatures between the substituent and the phase changes they induce. Herein, we report the infrared optical responses of three undoped hafnium oxide films where annealing conditions have been used to create films consisting primarily of the ferroelectric polar orthorhombic Pca2 1 , antipolar orthorhombic Pbca, and monoclinic P2 1 /c phases, as was confirmed via transmission electron microscopy (TEM), UVvisible optical properties, and electrical property measurements. Vibrational signatures acquired from synchrotron nano-Fourier transform infrared spectroscopy (nano-FTIR) are shown to be capable of differentiating between the phases in a non-destructive, rapid, and nanoscale manner. The utility of nano-FTIR is illustrated for a film exhibiting an antiferroelectric polarization response. In this sample, it is proven that this behavior results from the Pbca phase rather than the often-cited tetragonal phase. Here, by demonstrating that IRspectroscopy can unambiguously distinguish phases in this material, this work establishes a tool needed to isolate the factors dictating ferroelectric phase stability in HfO 2 -based materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Synthesis and structural characterization of the new Zintl phases Ba 3 Cd 2 P 4 and Ba 2 Cd 2 P 3 . Rare example of small gap semiconducting behavior with negative thermopower within the range 300 K-700 K

The new Zintl phases Ba 3 Cd 2 P 4 and Ba 2 Cd 2 P 3 have been synthesized using Pb flux, which allowed for the growth of 4-5 mm large crystals. The structures were determined utilizing single-crystal X-ray diffraction methods. Both compounds crystalize in the monoclinic crystal system (space group C2/m (No. 12)) and their structures are closely related. The structure of Ba 3 Cd 2 P 4 can be seen as being comprised of divalent Ba atoms and conjoined CdP 4 tetrahedra in the form of [Cd 2 P 4 ] 6- layers. Within the layers, homoatomic P–P bonds are present, which if cleaved, leave two infinite [CdP 3 ] 7- chains running along the crystallographic b-axis. The other structure, that of Ba 2 Cd 2 P 3 , can be rationalized as also having divalent Ba atoms and conjoined CdP4 tetrahedra in the form of [Cd 2 P 3 ] 6- layers. These layers, again, can be visualized as chains that run down the crystallographic b-axis, which are further connected by P-P dimers. Electronic band structure calculations show that each structure has an optimal number of valence electrons, and therefore conform to the Zintl-Klemm concept. Accordingly, the two compounds can be considered small band gap semiconductors, with band gaps of ca. 0.1 eV and 0.6 eV for Ba3Cd2P4 and Ba 2 Cd 2 P 3 , respectively. Electrical resistivity measurements show that Ba3Cd2P4 displays a large resistivity value at room temperature and an experimental band gap of ca. 0.05 eV, which fits reasonably well with the theoretical predictions. Thermopower measurements show that throughout the temperature range 300 K-700 K, Ba 3 Cd 2 P 4 displays a negative Seebeck coefficient. Here, the extremum value of -84 μV is reached at 630 K, suggestive of an n-type semiconductor, a rarity among Zintl phases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Field-tuned ferroquadrupolar quantum phase transition in the insulator TmVO 4

We report results of low-temperature heat-capacity, magnetocaloric-effect, and neutron-diffraction measurements of TmVO 4 , an insulator that undergoes a continuous ferroquadrupolar phase transition associated with local partially filled 4 f orbitals of the thulium (Tm 3 + ) ions. The ferroquadrupolar transition, a realization of Ising nematicity, can be tuned to a quantum critical point by using a magnetic field oriented along the c axis of the tetragonal crystal lattice, which acts as an effective transverse field for the Ising-nematic order. In small magnetic fields, the thermal phase transition can be well described by using a semiclassical mean-field treatment of the transverse-field Ising model. However, in higher magnetic fields, closer to the field-tuned quantum phase transition, subtle deviations from this semiclassical behavior are observed, which are consistent with expectations of quantum fluctuations. Although the phase transition is driven by the local 4 f degrees of freedom, the crystal lattice still plays a crucial role, both in terms of mediating the interactions between the local quadrupoles and in determining the critical scaling exponents, even though the phase transition itself can be described via mean field. In particular, bilinear coupling of the nematic order parameter to acoustic phonons changes the spatial and temporal fluctuations of the former in a fundamental way, resulting in different critical behavior of the nematic transverse-field Ising model, as compared to the usual case of the magnetic transverse-field Ising model. Our results establish TmVO 4 as a model material and electronic nematicity as a paradigmatic example for quantum criticality in insulators.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Influence of helium bubbles on the bulk equation of state of gold under static compression

Nuclear materials often evolve into two-phase systems comprising a bulk matrix with dispersed inert-gas bubbles. The presence of these bubbles can have consequences to the thermomechanical response of materials and is a key life-limiting factor in some nuclear fuel forms. Understanding the behavior of these two-phase, bubble-matrix systems is, thus, important to improved predictive models and frameworks for many nuclear materials applications. While temperature excursions of these two-phase systems have been characterized, fewer studies have focused on the evolution of inert-gas bubbles under pressure. Here, in this paper, we use x-ray tools to interrogate a He-implanted gold foil to determine the pressure-dependent evolution of the individual components (Au matrix + bubbles), and we compare that total pressure dependence to theoretical equation-of-state descriptions based on mixing rules.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Additively manufactured high-entropy alloy mimics the pressure-induced structural transition of iron

We report a pressure-induced structural phase transformation in an additively manufactured (AM) AlCrFe 2 Ni 2 high-entropy alloy. High laser scan-speed processing during AM has been shown to strongly suppress FCC formation, yielding BCC/B2-dominant microstructures. Synchrotron x-ray diffraction reveals a reversible BCC/B2 → HCP transition near ∼13 GPa that mirrors the α-Fe → ɛ-Fe transformation in elemental iron. Notably, this iron-like phase change occurs despite substantial chemical disorder and multi-element site occupancy, demonstrating that the BCC lattice instability leading to close-packed polymorphs can persist in a highly disordered matrix. At ambient pressure, AlCrFe 2 Ni 2 exhibits robust ferromagnetic behavior associated with the BCC/B2 phase. The observation of an α-Fe–like polymorphic pathway in a chemically complex alloy shows that classic cubic-to-close-packed transformation physics is not extinguished by compositional complexity. As a result, AlCrFe 2 Ni 2 emerges as a model system for exploring pressure-driven polymorphism and potential magneto-structural coupling in high-entropy alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Thermal Stability of π-Conjugated n -Ethylene-Glycol-Terminated Quaterthiophene Oligomers: A Computational and Experimental Study

This work represents a joint computational and experimental study on a series of $\textit{n}$-ethylene glycol (PEO$\textit{n}$)-terminated quaterthiophene (4T) oligomers for 1 < $\textit{n}$ < 10 to elucidate their self-assembly behavior into a smectic-like lamellar phase. This study builds on an earlier study for $\textit{n}$ = 4 that showed that our model predictions were consistent with experimental data on the melting behavior and structure of the lamellar phase, with the latter consisting of crystal-like 4T domains and liquid-like PEO4 domains. The present study aims to understand how the length of the terminal PEO$\textit{n}$ chains modulates the disordering temperature of the lamellar phase and hence the relative stability of the ordered structure. In this work, a simplified bilayer model, where the 4T domains are not explicitly described, is put forward to efficiently estimate the disordering effect of the PEO domains with increasing n; this method is first validated by correctly predicting that layers of alkyl (PE)-capped 4T oligomers (for 1 < $\textit{n}$ < 10) stay ordered at room temperature. Both 4T-domain implicit and explicit model simulations reveal that the order-disorder temperature decreases with the length of the PEO capping chains, as the associated increase in conformational entropy drives a tendency toward disorder that overtakes the cohesive energy, keeping the ordered packing of the 4T domains.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Thermal Hysteresis and Ordering Behavior of Magnetic Skyrmion Lattices

The physics of phase transitions in two-dimensional (2D) systems underpins research in diverse fields including statistical mechanics, nanomagnetism, and soft condensed matter. However, many aspects of 2D phase transitions are still not well understood, including the effects of interparticle potential, polydispersity, and particle shape. Magnetic skyrmions are chiral spin-structure quasi-particles that form two-dimensional lattices. Here, in this study, we show, by real-space imaging using in situ cryo-Lorentz transmission electron microscopy coupled with machine learning image analysis, the ordering behavior of Néel skyrmion lattices in van der Waals Fe 3 GeTe 2 . We demonstrate a distinct change in the skyrmion size distribution during field-cooling, which leads to a loss of lattice order and an evolution of the skyrmion liquid phase. Remarkably, the lattice order is restored during field heating and demonstrates a thermal hysteresis. This behavior is explained by the skyrmion energy landscape and demonstrates the potential to control the lattice order in 2D phase transitions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Effects of Zr addition on lattice strains and electronic structures of NbTaTiV high-entropy alloy

We report the room-temperature (RT) deformation behavior for two single-phase body-centered-cubic (BCC) refractory high-entropy alloys (RHEAs), NbTaTiV and NbTaTiVZr, has been comprehensively investigated via in-situ neutron-diffraction experiments. Our work shows that the addition of Zr leads to the transition of mechanical response from ductile to brittle behavior. The results of lattice-strain evolutions obtained from in-situ neutron diffraction for the ductile NbTaTiV RHEA exhibit atypical plastic-deformation behavior, i.e., the reduced plasticanisotropic deformation, leading to an even distribution of the applied stress amongst the grains with different orientations rather than forming stress concentrations in {200}-oriented grains during plastic-deformation. Density functional theory (DFT) analysis shows that NbTaTiVZr has a lower electron density at the Fermi level, larger lattice distortion, and stronger charge transfer, as compared to NbTaTiV, suggesting higher strength and lower ductility in NbTaTiVZr, which are consistent with the current experimental results.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Data-Efficient Methods for Determining Flory–Huggins χ Parameters in Multicomponent Polymer Formulations

Polymer formulations are essential in diverse applications including personal care products, coatings, paints, adhesives, and plastic materials. Designing these formulations requires navigating large, complex design spaces, where phase and self-assembly behavior critically impact performance. The Flory–Huggins χ parameter, which quantifies segmental miscibility, is widely used to parametrize the excess free energy of mixing in formulation models. In this work, we introduce two data-efficient, top-down methods for estimating χ parameters using the Random Phase Approximation (RPA): (i) Boundary Nonlinear Regression (Boundary-NLR), which fits theoretical spinodal boundaries to experimental phase boundaries, and (ii) Surrogate Model Inverse Parameter Estimation (SMIPE), which uses a Gaussian Process Classifier to fit sparse phase maps via a surrogate model. Both methods allow rapid parametrization of polymer field-theoretic models without the need for additional experiments. We evaluate these approaches on data sets involving polymer–solvent–nonsolvent ternary mixtures and block copolymer–solvent systems, demonstrating their robustness to experimental noise and their relevance for real-world formulation design.

copolymers↗