Search NASA⌕ Search

SEARCH · Search NASA

Results for “preparation methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

20 Years Experience with the World's Largest Superconducting RF Application: CEBAF

The Continuous Electron Beam Accelerator Facility (CEBAF) uses over 350 multi-cell resonant rf structures to accelerate a precision high-power electron beam for nuclear physics research. These cavities are made of bulk niobium and operated CW at 2.07K, employing the world's 2nd largest sub-lambda cryogenics system. The superconducting system is a vital part of this unique tool for fundamental research. Through 20 years of system construction and operation the preparation methods have evolved and the performance levels have continued to climb. State-of-the practice now supports > 50 MV/m surface electric fields and > 100 mT surface magnetic fields while maintaining < 30 nOhm surface resistance. The evolution of the superconducting aspects of CEBAF will be reviewed, together with the associated production methods.

Reece, Charles↗

Direct analysis of cotton swipes for uranium and plutonium isotopic determination by microextraction-ICP-MS

The determination of uranium and plutonium isotopic abundance on environmental samples collected by International Atomic Energy Agency (IAEA) inspectors is vital for the detection of undeclared nuclear activities and material under the international nuclear safeguards regime. Current analytical protocols require time-consuming sample preparation steps prior to subsequent measurement by inorganic mass spectrometry (MS). Recent efforts from this laboratory have focused on developing sample preparation methods for faster analysis, potentially allowing higher sample throughput[1]. Alternative methods including microextraction sampling in conjunction with inductively coupled plasma-mass spectrometry (ICP-MS) have been recently explored. This methodology, microextraction-ICP-MS, was developed such that uranium and plutonium could be extracted from the swipe surface and directed into the ICP-MS for an in-situ measurement, eliminating the need for swipe ashing and digestion. A commercial off-the-shelf microextraction system was customized with an automated movable XY stage that can be programmed to save sampling locations, allowing for automated rapid sampling of swipe surfaces. Additional efforts have focused on the utilization of collision cell technology to the microextraction ICP-MS method. This would eliminate the need for lengthy column chemistry procedures to purify separated uranium and plutonium fractions before analysis. Here, the extracted U/Pu analyte is measured by reacting the uranium ions with CO2 in the collision cell of an ICP-MS, shifting the uranium to UO+, which will not interfere with the plutonium isotopic determination. The developed method utilizing collision cell – ICP-MS technology has demonstrated the ability to measure plutonium isotope ratios in the presence of high uranium concentration on the transient signal from the microextraction system utilizing certified reference materials from JRC-Geel and the New Brunswick Laboratory Program Office.

Bradley, Veronica↗

Plasma Treatment of Bulk Niobium Surface for SRF Cavities - Optimization of the Experimental Conditions on Flat Samples

Accelerator performance, in particular the average accelerating field and the cavity quality factor, depends on the physical and chemical characteristics of the superconducting radio-frequency (SRF) cavity surface. Plasma based surface modification provides an excellent opportunity to eliminate non-superconductive pollutants in the penetration depth region and to remove mechanically damaged surface layer improving surface roughness. Here we show that plasma treatment of bulk Nb presents surface preparation method alternative to the commonly used BCP and EP methods. We have optimized the experimental conditions in the microwave glow discharge system and their influence on the Nb removal rate on the flat samples. We have achieved etching rates of 1.5 micro-m/min using only 3% Cl2 in the reactive mixture. Combining fast etching step with the moderate one, we have improved a surface roughness without exposing fresh sample surface to the environment. We will apply optimized experimental conditions to single cell cavities, in pursuing improvement of their RF performance.

Raskovic, Marija↗

Characterization and photocatalytic activity of Bi{sub 3}TaO{sub 7} prepared by hydrothermal method

In this paper, Bi{sub 3}TaO{sub 7} nanoparticles with visible light response have been prepared via a facile hydrothermal route and solid-state reaction. The photocatalytic performance of as-prepared samples was evaluated by the degradation of Tetracycline hydrochloride (TC). It was observed that the sample obtained by hydrothermal method showed an enhanced photocatalytic activity in contrast to the sample prepared by solid-state method. This could be ascribed to the efficient separation of photogenerated electrons and holes in the sample prepared via hydrothermal process, which is certified by the photoluminescence spectroscopy (PL) and transient photocurrent analysis. Moreover, the result of nitrogen adsorption-desorption isotherm indicated the existence of mesoporous structure in as-prepared sample with hydrothermal process, and specific surface area is significantly higher than the sample obtained by solid-state method. The optimal conditions involved in the photocatalytic reaction, such as TC concentration, catalyst concentration and pH value were investigated. - Graphical abstract: The preparation process of Bi{sub 3}TaO{sub 7} photocatalyst by hydrothermal method. Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A facile method for rapid preparation of individual titania nanotube powders by a two-step process

Research highlights: {yields} Rapid and facile preparation of individual titania nanotube powders. {yields} Combination of the electrochemical process and the physical processing. {yields} Post ultrasonic treatment acts as the key factor to obtain the individual TiO{sub 2} NT powders. {yields} Individual TiO{sub 2} NTs powder owns higher photocatalytic activities. -- Abstract: Present study reports a facile method for preparing individual TiO{sub 2} nanotube (NT) powders by a two-step process, which includes that TiO{sub 2} NT bundles are rapidly synthesized by an electro-chemical process in perchlorate-containing electrolyte and then they are disaggregated into individual TiO{sub 2} NT powders under an assistance of ultrasonic oscillation treatment. Morphological and microstructural properties of the individual TiO{sub 2} NT powders are characterized by field emission scanning electron microscopy and transmission electron microscopy. Results indicate that the individual TiO{sub 2} NT powders, which have an outer diameter of about 20 nm and an inner diameter of 10 nm, can be easily obtained from the disaggregation of the TiO{sub 2} NT-bundles by combining the electrochemical process with the physical processing. Furthermore, the individual TiO{sub 2} NT powders exhibit higher photocatalytic activity than the TiO{sub 2} NT-bundle powders.

36 MATERIALS SCIENCE↗

A rapid and convenient method for the preparation of thermochromic VO{sub 2} thin films

Highlights: • A simple and efficient route has been developed for the preparation of VO{sub 2} thin films. • VO{sub 2} films annealed at high enough crystallization temperature were obtained and analyzed. • Excellent optical modulation both in the visible and near-infrared region has been achieved in the prepared VO{sub 2} film. - Abstract: The annealing temperature for the preparation of VO{sub 2} films with sputtering method have always been applied in the range of 300–500 °C. Herein, a simple and efficient route has been developed for the preparation of VO{sub 2} thin films through the thermal oxidation of sputtered vanadium film at 585 °C. Structural, morphological, elemental analysis and thermochromic properties of synthesized VO{sub 2} films are reported. Different from the traditional sputtered VO{sub 2} films, large change of transmittance has been found in the visible region during phase transition. The present work shows the feasibility to fabricate reliably reproduced high quality VO{sub 2} films with reversible phase transition and excellent optical modulation both in the visible and near-infrared region.

36 MATERIALS SCIENCE↗

Method for selectively preparing 5-hydroxymethylfurfual (HMF) from biomass in polar aprotic solvents

A method to produce 5-hydroxymethylfurfural (HMF) is described in which a reactant including cellulose, lignocellulose, or a combination thereof, in a reaction mixture of a polar, aprotic solvent and an acid is reacted for a time, at a temperature, and at a hydrogen ion concentration wherein at least a portion of the cellulose or lignocellulose present in the reactant is converted to HMF. The reaction mixture is initially substantially devoid of water. As the reaction proceeds, dehydration of intermediates causes the water concentration in the reaction mixture to rise to no more than about 0.2 wt % water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Method for the preparation of uniform triaminotrinitrobenzene microparticles

A new, rapid and inexpensive synthesis method for monodispersed triaminotrinitrobenzene (TATB) microparticles based on micelle-confined precipitation that enables control of microscopic morphology. The morphology of the TATB microparticles can be tuned between quasi-spherical and faceted by controlling the speed of recrystallization. The method enables improved performance and production consistency of TATB explosives for military grade explosives and propellants

36 MATERIALS SCIENCE↗

Effects of Nd-doping on optical and photovoltaic properties of barium titanate thin films prepared by sol–gel method

Graphical abstract: - Highlights: • We prepared Nd-doped BTO thin films by sol–gel method. • Addition of Nd to some extent can inhibit the grain growth. • Addition of Nd{sup 3+} ions can decrease band gap. • The remnant polarization of Nd-doped BTO thin films begins to increase and then decreases. • Photovoltaic properties of Nd-doped BTO thin films begin to increase then decrease. - Abstract: Nd-doped barium titanate thin films were prepared via sol–gel spin-coating method and effects of Nd content on microstructure, optical and photovoltaic properties have been investigated. The results show that Nd-doped barium titanate thin films are single tetragonal perovskite phase. Addition of neodymium to some extent can inhibit the grain growth. Substitution of Nd{sup 3+} ions for Ba{sup 2+} on A sites leads to the decrease of band gap. The remnant polarization begins to increase and reach the maximum and then decreases as Nd content increases. The short circuit photocurrent density, open circuit photovoltage and power conversion efficiency of Nd-doped barium titanate thin films begin to increase and reach the maximum and then decrease as Nd content increases.

36 MATERIALS SCIENCE↗

Standards for electron probe microanalysis of silicates prepared by convenient method

Standard compositions suitable for electron probe microanalysis of various silicates are prepared by coprecipitation of specified salts with colloidal silica to form a gel which is decomposed into a powdered oxide mixture and compressed into thin pellets. These pellets of predetermined standard are compared with a silicate sample to determine its composition.

Walter, L. S.↗

Effect of precursor concentration on the electrical properties of LiFePO{sub 4} prepared by solvothermal method

Lithium iron phosphate (LiFePO{sub 4}) is frequently used for Li-ion battery cathode. LiFePO{sub 4} has the high specific capacity at 170 mAhg{sup −1}, stable voltage at 3.45 V, stable structure, cheap, and low toxicity. The objective of this research is investigating the effect of precursor concentration on the electrical properties of LiFePO{sub 4} prepared by solvothermal method. LiOH, FeSO{sub 4}, H{sub 3}PO{sub 4}, and citric acid were used as the precursors. The LiOH concentration was varied from 0.3 M to 1.8 M. The Fourier Transform Infrared Spectroscopy (FTIR) measurement identified the Fe-O, O-P-O, and P-O bonds which corresponding to LiFePO{sub 4}. The result of 4-point probe measurement shows that, among the prepared samples, the sample from the precursor concentration of 1.8 M has the highest electrical conductivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Method for selectively preparing evoglucosenone (LGO) and other anhydrosugars from biomass in polar aprotic solvents

A method to produce 5-hydroxymethylfurfural (HMF) is described in which a reactant including cellulose, lignocellulose, or a combination thereof, in a reaction mixture of a polar, aprotic solvent and an acid is reacted for a time, at a temperature, and at a hydrogen ion concentration wherein at least a portion of the cellulose or lignocellulose present in the reactant is converted to HMF. The reaction mixture is initially substantially devoid of water. As the reaction proceeds, dehydration of intermediates causes the water concentration in the reaction mixture to rise to no more than about 2.0 wt % water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Improved Superconducting Properties in Graphene-Doped MgB{sub 2} Prepared by Coating Method

The effects of graphene doping on the phase formation and superconductivity of MgB{sub 2} bulks synthesized with different process have been studied systemically. Considering the scattering structure of graphene, coating method was applied to enhance the uniformity of graphene doping. The graphene coated B addition was expected to improve the critical current density of MgB{sub 2} bulks. In our study, several experiments were performed to find out the suitable way for graphene doping. The coating method could enhance the critical current density of MgB{sub 2} from 1.9 × 10{sup 5} to 2.5 × 10{sup 5} A/cm{sup 2} at 20 K and 0 T, compared with that of the undoped sample. And the superconductivity of MgB{sub 2} prepared by coating method got obvious improvement at high field compared with that of pure graphene doping bulk. It can be concluded that the coating method could ensure the uniformity of graphene doping in MgB{sub 2} and refined the grain crystalline effectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhanced ferromagnetic properties and high temperature dielectric anomalies in Bi{sub 0.9}Ca{sub 0.05}Sm{sub 0.05}FeO{sub 3} prepared by hydrothermal method

Graphical abstract: Temperature variation of dielectric constant of Bi{sub 0.9}Ca{sub 0.05}Sm{sub 0.05}FeO{sub 3} at various frequencies as a function of temperature indicating anomalies at 420 and 540 K. - Highlights: • Substitution of Sm ions for Bi enhances the saturation magnetization of BiFeO{sub 3}. • XPS studies indicate the creation of oxygen vacancies upon Ca substitution. • Dielectric measurements show dielectric anomalies at high temperatures. • Raman spectra at high temperatures confirm the dielectric anomaly temperatures. - Abstract: Enhanced ferromagnetic properties and high temperature dielectric anomalies in the temperature range of 300–873 K in Bi{sub 0.9}Ca{sub 0.05}Sm{sub 0.05}FeO{sub 3} (BCSFO) prepared by hydrothermal method are reported. BiFeO{sub 3} is seen to crystallize in rhombohedrally distorted perovskite structure without any impurity phase. Substitution of small amount of Ca and Sm (Bi{sub 0.9}Ca{sub 0.05}Sm{sub 0.05}FeO{sub 3}) leads to increase in the lattice constant values and formation of small amount of secondary phase. Magnetization curve of pure BFO indicates very weak ferromagnetism combined with antiferromagnetic nature of the samples. Whereas, BCSFO sample shows very clear and enhanced ferromagnetic nature. Saturation magnetization and Neel’s temperature values are found to be 4.36 emu/g and 664 K, respectively. X-ray photoelectron spectroscopy indicates the creation of oxygen vacancies upon Ca substitution in Bi site. Dielectric anomalies at 420 and 540 K were observed for Bi{sub 0.9}Ca{sub 0.05}Sm{sub 0.05}FeO{sub 3} from the temperature variation of dielectric constant and specific heat capacity measurements. Observation of dielectric anomalies in pure BiFeO{sub 3} sample reveals that the origin of dielectric peaks is purely from the primary phase. Raman spectroscopy study indicates a clear shift and broadening of A modes (between 100 and 200 cm{sup −1}) at the dielectric anomaly temperatures supporting the observed dielectric anomalies.

36 MATERIALS SCIENCE↗

AC Susceptibility of BaZrO{sub 3} Nanoparticles Added YBa{sub 2}Cu{sub 3}O{sub 7−δ} Superconductor Prepared via Coprecipitation Method

In this work, magnetic properties of polycrystalline samples YBa{sub 2}Cu{sub 3}O{sub 7−δ} added with x mol.% of BaZrO{sub 3} (BZO) nanoparticles (x = 0.0, 1.0, 2.0, 3.0, 5.0, and 7.0) were studied by AC susceptibility (ACS) measurement. The samples were prepared using coprecipitation (COP) method. X-ray diffraction (XRD) results showed that all the samples were composed of Y-123 as the major phase and Y-211 as the secondary phase. XRD peak of BZO was also observed in the samples added with BZO nanoparticles. The intensity of the peak became higher with increasing amount of BZO addition indicating the presence of increased amount of the unreacted nanoparticles in the samples. The refined lattice parameters indicated that all the samples have an orthorhombic crystal structure without the occurrence of orthorhombic-tetragonal phase transformation. Scanning electron microscopy (SEM) images showed that the samples have randomly distributed grains with irregular shape. The average grain size increased from 0.30 μ m for the pure sample to 0.50 μ m for the BZO addition of 7.0 mol.%. ACS measurement showed a slight decrease of onset critical temperature, T{sub c−onset} (< 1 K) with BZO addition. Both phase lock-in temperature, T{sub cj}, and coupling peak temperature, T{sub p}, remained relatively unchanged for BZO addition up to 3.0 mol.%. Based on the Bean critical state model, the calculated intergranular critical current density, J{sub cm}, for the pure sample is 1.88 A/cm{sup 2} at T{sub p} = 84.8 K. For the sample added with 7.0 mol.% of BZO, J{sub cm} at T{sub p} = 83.6 K is 1.95 A/cm{sup 2}.

77 NANOSCIENCE AND NANOTECHNOLOGY↗