Search NASA⌕ Search

SEARCH · Search NASA

Results for “process simulation modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Kinetic modelling of an environmentally friendly carbamazepine synthesis via urea and iminostilbene in batch and continuous processes

Accurate kinetic models for reaction systems allow for improved process understanding and greater quality control, which is particularly beneficial as the pharmaceutical industry shifts from batch to continuous manufacturing (CM). In this work, a first principles kinetic model has been developed for the synthesis of carbamazepine (CBZ) from iminostilbene and urea, starting in a batch reactor and subsequently in a continuous flow reactor. An eco-friendly reaction pathway using urea was selected to avoid the toxic reagents that are typically used for synthesis of CBZ. The kinetic parameters determined from batch reactions were utilized in a MATLAB based kinetic model to simulate the yield for the continuous process. Overall, good agreement between the model prediction and corresponding experimental values was observed for the batch and continuous reaction systems within the full factorial design space. However, the model slightly overpredicted the yield of the continuous reaction system for higher conversion values (>60%) since it did not account for the reverse reaction that can occur at the studied reaction conditions. Here, the use of broken order kinetics was compared with whole number orders, and it was determined that the whole number orders resulted in better agreement at all conversion values for the continuous system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Economic assessment for recycling critical metals from hard disk drives using a comprehensive recovery process

Since the 2011 price spike of rare earth elements (REEs), research on permanent magnet recycling has blossomed globally to reduce future REE criticality. Hard disk drives (HDDs) have emerged as one feasible feedstock for recovering valuable REEs such as praseodymium, neodymium, and dysprosium. However, current processes for recycling e-waste only focus on certain metals due to feedstock and metal price uncertainties. In addition, some believe that recycling REEs is unprofitable. To shed some light on the economic viability of REE recycling from HDDs, this paper combines techno-economic information of a hydrometallurgical process with end-of-life HDD availability in a simulation model. Results showed that adding REEs to HDD recycling was profitable given current prices. As a result, recovered REEs could meet up to 5.1% rest of world (excluding China) magnet demand. Aluminum, gold, copper scrap and REEs were the primary main revenue streams from HDD recycling.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2026

Physiological Controls on Carbon Fluxes and Biomass Production in Miscanthus: Insights From a Process‐Based Agroecosystem Model

Biomass crops serve as essential feedstocks for renewable energy and bioproducts and play a critical role in achieving lower emissions in the transportation sector. However, dedicated perennial biomass crops such as Miscanthus × giganteus (Miscanthus) remain underrepresented in process-based agroecosystem models, limiting robust evaluation of their economic and environmental performance. In this study, we developed a data-constrained representation of the sterile triploid Miscanthus (IL clone) within the process-based model ecosys, integrating global sensitivity analysis, ensemble simulation, and parameter calibration. Planting, harvesting, and fertilization practices consistent with field management were incorporated, and phenology was constrained using PhenoCam-derived Green Chromatic Coordinate (GCC) data. Using the Morris global sensitivity analysis method, we identified 11 key physiological parameters governing plant carbon, water, and nutrient relations, particularly processes associated with CO 2 assimilation. We then conducted ensemble simulations by perturbing these parameters and calibrated the model against eddy covariance fluxes and field-measured biomass. Building on the calibrated operating state, parameter-response analyses show that different photosynthetic processes influence productivity in different ways. Protein allocation determines whether productivity increases toward a higher level, whereas electron transport capacity controls additional gains once protein allocation approaches saturation. These findings demonstrate that parameter importance depends on physiological context and on which photosynthetic processes remain limiting. Calibration and validation against observations show that ecosys can reliably reproduce carbon and water fluxes, as well as both above- and belowground biomass, with post-calibration GPP R 2 improving from 0.67 to 0.95 during the calibration period and remaining high during validation (R 2 = 0.95). These results provide a mechanistic foundation for regional simulations and sustainable bioenergy assessments.

ecosys↗
DOE OSTI2021

Quantifying the structural uncertainty of the aerosol mixing state representation in a modal model

Abstract. Aerosol mixing state is an important emergent property that affects aerosol radiative forcing and aerosol–cloud interactions, but it has not been easy to constrain this property globally. This study aims to verify the global distribution of aerosol mixing state represented by modal models. To quantify the aerosol mixing state, we used the aerosol mixing state indices for submicron aerosol based on the mixing of optically absorbing and non-absorbing species (χo), the mixing of primary carbonaceous and non-primary carbonaceous species (χc), and the mixing of hygroscopic and non-hygroscopic species (χh). To achieve a spatiotemporal comparison, we calculated the mixing state indices using output from the Community Earth System Model with the four-mode version of the Modal Aerosol Module (MAM4) and compared the results with the mixing state indices from a benchmark machine-learned model trained on high-detail particle-resolved simulations from the particle-resolved stochastic aerosol model PartMC-MOSAIC. The two methods yielded very different spatial patterns of the mixing state indices. In some regions, the yearly averaged χ value computed by the MAM4 model differed by up to 70 percentage points from the benchmark values. These errors tended to be zonally structured, with the MAM4 model predicting a more internally mixed aerosol at low latitudes and a more externally mixed aerosol at high latitudes compared to the benchmark. Our study quantifies potential model bias in simulating mixing state in different regions and provides insights into potential improvements to model process representation for a more realistic simulation of aerosols towards better quantification of radiative forcing and aerosol–cloud interactions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Exploiting electricity market dynamics using flexible electrolysis units for retrofitting methanol synthesis

Here we investigate the economic viability of integrating flexible electrolysis units to produce hydrogen in methanol synthesis processes. Specifically, we investigate whether this approach can help reduce methanol production costs by strategically exploiting dynamics of electricity markets. Our study integrates high-fidelity process simulations, optimization tools, and microkinetic modeling (informed by density functional theory) to conduct detailed techno-economic analyses and to compare performance against traditional processes that use hydrogen produced via steam-methane reforming (SMR). We also use this approach to estimate the levelized cost of hydrogen (LCOH) as a function of time-varying electricity prices (from day-ahead and real-time prices) and of key techno-economic parameters. Our results show that the proposed electrification framework is cost-competitive under certain electricity market conditions. Specifically, we find that, when the electrolysis system is operated in flexible mode (and can respond to dynamics of electricity markets), the associated electricity cost nearly collapses to zero. Conversely, when the unit is not flexible (and cannot respond to markets), the electricity cost comprises 60% of the total cost. Our results also reveal that the LCOH of the flexible electrolysis system participating in real-time electricity markets is 31% lower than the LCOH obtained from SMR. Overall, this indicates that exploiting the dynamics of electricity markets can make hydrogen production cost-competitive and this can lead to viable alternatives to electrify methanol production and other hydrogen-based processes.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
NASA NTRS2013

Simulation of Inflated Pahoehoe Lava Flows

A new stochastic model simulates late-stage pahoehoe lobes where random processes dominate emplacement. The model prescribes probabilistic rules for determining where and when parcels of lava move within the lobe. Unlike a classical Brownian motion random walk, the model allows individual parcels to remain dormant, but fluid, for multiple time steps. The randomness of parcel volume transfers within the lobe interior as well as at the margins qualitatively reflects inflation processes observed in the field. The fraction of inflated volume to total volume increases with the total volume, with greater than 75% of the lobe volume contributed through inflation for typical lobes. The influence on planform shape and topographic cross-sectional profiles of total volume, source area and shape, topographic confinement, and sequential breakouts at the lobe margins, are all explored with the stochastic model. Each of these factors influences the overall lobe thickness and width. The model provides a means for assessing the relative importance of these processes through comparisons with field data. For the first time, Gaussian and parabolic functions are quantitatively fit to field measurements of pahoehoe lobes. Both functional forms provide adequate description of the cross-sectional flow shapes. When comparing simulated lobes to field data, sequential breakouts at the lobe margins are found to be an important process controlling the final topographic distribution of observed pahoehoe lobes.

modeling↗
DOE OSTI2024

Convergence in simulating global soil organic carbon by structurally different models after data assimilation

Abstract Current biogeochemical models produce carbon–climate feedback projections with large uncertainties, often attributed to their structural differences when simulating soil organic carbon (SOC) dynamics worldwide. However, choices of model parameter values that quantify the strength and represent properties of different soil carbon cycle processes could also contribute to model simulation uncertainties. Here, we demonstrate the critical role of using common observational data in reducing model uncertainty in estimates of global SOC storage. Two structurally different models featuring distinctive carbon pools, decomposition kinetics, and carbon transfer pathways simulate opposite global SOC distributions with their customary parameter values yet converge to similar results after being informed by the same global SOC database using a data assimilation approach. The converged spatial SOC simulations result from similar simulations in key model components such as carbon transfer efficiency, baseline decomposition rate, and environmental effects on carbon fluxes by these two models after data assimilation. Moreover, data assimilation results suggest equally effective simulations of SOC using models following either first‐order or Michaelis–Menten kinetics at the global scale. Nevertheless, a wider range of data with high‐quality control and assurance are needed to further constrain SOC dynamics simulations and reduce unconstrained parameters. New sets of data, such as microbial genomics‐function relationships, may also suggest novel structures to account for in future model development. Overall, our results highlight the importance of observational data in informing model development and constraining model predictions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Advanced Drying Cycle Simulator Thermal Response to Commercial Drying Conditions

The purpose of this report is to document updates on testing of the apparatus built to simulate commercial drying procedures for spent nuclear fuel at the Nuclear Energy Work Complex at Sandia National Laboratories. Validation of the extent of water removal in a dry spent nuclear fuel storage system based on drying procedures used at nuclear power plants is needed to close existing technical gaps. Operational conditions leading to incomplete drying may have potential impacts on the fuel, cladding, and other components in the system during subsequent storage and disposal. A general lack of data suitable for model validation of commercial nuclear canister drying processes necessitates well-designed investigations of drying process efficacy and water retention that incorporate relevant physics and well-controlled boundary conditions. This report documents testing updates for the Advanced Drying Cycle Simulator (ADCS). This apparatus was built to simulate commercial drying procedures and quantify the amount of residual water remaining in a pressurized water reactor (PWR) fuel assembly after drying. The ADCS was constructed with a prototypic 17×17 PWR fuel skeleton and waterproof heater rods to simulate decay heat. These waterproof heaters are the next generation design to heater rods developed and tested at Sandia National Laboratories in FY20. This report describes preliminary testing of the ADCS through measurement and analysis of the thermal response of the system to a subset of commercial drying conditions that exclude the introduction of water, namely simulated decay heats and pressures relevant to commercial drying. This test series, referred to as a “dry” test series in this report, spans three uniform waterproof heater rod powers (representing spent fuel decay heats), four helium fill pressures, and six vacuum levels. This test series was conducted to cover the range of expected ADCS testing conditions for upcoming “wet” testing, where water will be introduced and a simulated commercial drying cycle will be performed. The dry test conditions were derived from the commercial drying conditions seen in the High Burnup Demonstration and the vacuum drying conditions chosen for a smaller scale Dashpot Drying Apparatus tested at Sandia National Laboratories in FY22. For a given uniform power and pressure/vacuum level, the ADCS was operated at constant power and pressure and allowed to reach steady state conditions. The thermal data obtained from these tests were analyzed, and the results can inform computational models built to simulate commercial drying processes by providing baseline thermal data prior to the introduction of water. Following the preliminary dry tests, a test plan for the ADCS will be developed to implement a drying procedure that begins with the introduction of water to the system and is based on measurements from the drying process used for the High Burnup Demonstration Project. While applying power to the simulated fuel rods, this procedure is expected to consist of filling the ADCS vessel with water, draining the water with applied pressure and multiple helium blowdowns, evacuating additional water with a vacuum drying sequence at successively lower pressures, and backfilling the vessel with helium. Additional investigations are expected to feature failed fuel rod simulators with engineered cladding defects and guide tubes with obstructed dashpots to challenge the drying system with multiple water retention sites. The data from these investigations is expected to inform the efficacy of commercial drying operations through the quantification of residual water in a prototypic-length dry storage canister.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

A HPC Theory-Guided Machine Learning Cyberinfrastructure for Communicating Hydrometeorological Data Across Scales

High-resolution predictions of hydrometeorological variables are critical for supporting hydropower generation decisions and flood control at hydroelectric power plants. Traditional climate and hydrologic models rely on the numerical simulation of detailed physical processes. Therefore, running these simulations is time-, labor-, and computation-intensive. Improving the spatial and temporal resolution in these modeling outputs could lead to cubic increases in both the simulation time and computational demands, rendering high-resolution hydrometeorological predictions expensive and impractical. Many past studies apply the super resolution (SR) technique to downscale climate models using deep learners. However, deep learners are deemed “black-boxes,” as their derivation processes from low-resolution outputs to high-resolution outputs are often hidden. Their results are difficult for domain scientists to interpret and validate. Thus, there is a need for an exploratory machine learning approach that can partially integrate domain-specific theory and knowledge into the data-driven mapping process between simulation outputs of different spatial scales. The domain-specific theory and knowledge can be incorporated into the data model through an inductive approach in which process-related environmental variables are used and analyzed as key drivers (i.e., environmental surrogates) to reflect the complex physical processes. Many of these variables, such as land use land cover, soil types, topography, digital elevation, air temperature, and various watershed characteristics, can be directly measured through sensors or remote sensing techniques. Additionally, SR applications that can downscale hydrological and hydrodynamics models to efficiently produce high-resolution (1 m) flood depth grids are still rare. Since the flood depth grid can be used to support critical decisions for flood control operation at hydroelectric power plants, it is crucial to enable an SR-based capability for interpolating high-resolution flood inundation maps.

13 HYDRO ENERGY↗
NASA NTRS2020

Marine wild-capture fisheries after nuclear war

Nuclear war, beyond its devastating direct impacts, is expected to cause global climatic perturbations through injections of soot into the upper atmosphere. Reduced temperature and sunlight could drive unprecedented reductions in agricultural production, endangering global food security. However, the effects of nuclear war on marine wild-capture fisheries, which significantly contribute to the global animal protein and micronutrient supply, remain unexplored. We simulate the climatic effects of six war scenarios on fish biomass and catch globally, using a state-of-the-art Earth system model and global process-based fisheries model. We also simulate how either rapidly increased fish demand (driven by food shortages) or decreased ability to fish (due to infrastructure disruptions), would affect global catches, and test the benefits of strong pre-war fisheries management. We find a decade-long negative climatic impact that intensifies with soot emissions, with global biomass and catch falling by up to 18 ± 3% and 29 ± 7% after a US-Russia war under business-as-usual fishing – similar in magnitude to the end-of-century declines under unmitigated global warming. When war occurs in an overfished state, increasing demand increases short-term (1-2 year) catch by at most ~30% followed by precipitous declines of up to ~70%, thus offsetting only a minor fraction of agricultural losses. However, effective pre-war management that rebuilds fish biomass could ensure a short-term catch buffer large enough to replace ~43 ± 35% of today’s global animal protein production. This buffering function in the event of a global food emergency adds to the many previously-known economic and ecological benefits of effective and precautionary fisheries management.

food from the ocean↗
NASA NTRSDate not supplied

Updates on the Predictive Materials Modeling Software Tools

Updates on NASA‘s efforts to build a Predictive Material Modeling (PMM) framework from the micro-scale to the macro-scale are presented in this abstract. The PMM effort is part of the Entry Systems Modeling (ESM) project under NASA’s Game Changing Development (GCD) program. To reduce the need for extensive testing and accelerate the design cycle process, ESM is developing simulation and modeling tools that enable the characterization of the properties of thermal protection materials and their response to extremely hot plasma. The Porous Microstructure Analysis (PuMA) software has been developed to compute effective material properties and perform material response simulations on digitized microstructures of porous media. PuMA is able to import three-dimensional digital images obtained from X-ray microtomography or to generate artificial microstructures that mimic real materials. PuMA also provides a module for interactive 3D visualizations. Version 3, which was recently released as open-source, includes modules to compute simple morphological properties such as porosity, volume fractions, pore diameter, and specific surface area. Additional capabilities include the determination of effective thermal and electrical conductivity (both radiative and solid conduction - including the ability to simulate local anisotropy for the latter); effective diffusivity and tortuosity from the continuum to the rarefied regime; techniques to determine the local material orientation, as well as mechanical properties (elasticity coefficients), and permeability. Computed properties are then used to inform a macro-scale material response model, such as those implemented in the Porous material Analysis Toolbox based on OpenFOAM (PATO) software developed within ESM. The computational model in PATO is a generic heat and mass transfer model for porous reactive materials containing several solid phases and a single gas phase. The detailed chemical interactions occurring between the solid phases and the gas phase are modeled at the pore scale, assuming Local Thermal Equilibrium. Recent efforts include the development of a mechanical erosion model as well as a unified model allowing an intrinsic coupling between fluid and material. Comparison to flight data (Mars Science Laboratory [MSL] Entry Descent and Landing Instrument [MEDLI] and Mars 2020 MEDLI2) is critical in order to validate these computational tools. Examples of ablative material response using the code will be presented, including 3D simulations of the full-scale heatshield of the MSL capsule. The simulations demonstrated the ability of the modern material response code, PATO, to handle the material response of geometrically complex and large domains through the use of massively parallel computations.

material modeling↗
DOE OSTI2022

Carbon Intensities of Refining Products in Petroleum Refineries with Co-Processed Biofeedstocks

Petroleum refineries increasingly seek to generate fuels with lower carbon intensities (CIs; a measure of life cycle greenhouse gas [GHG] emissions per unit of energy of fuel; well-to-wheel [WTW]) to meet growing demand. Co-processing refers to a process that adds biomass-derived feedstocks to the fossil-based feedstocks of existing petroleum refinery process units. With the use of biofeedstocks, it is expected that co-processed fuels would have lower CIs than their petroleum counterparts without requiring changes in the existing infrastructure for producing, transporting, and using fuels. To quantify the GHG emissions reduction benefits of co-processing, this study uses a linear programming model to simulate petroleum refinery conditions with and without co-processing. The co-processing cases include three biofeedstocks (soy oil, tallow, and used cooking oil or UCO) used as 10 vol.% of the feedstock to a hydrotreater or hydrocracker since these lipid-based feedstocks have favorable properties to be treated in a hydrotreater or hydrocracker. In addition, we considered pyrolysis oil used as 10 vol.% of the feedstock to a fluid catalytic cracking (FCC) unit in the modeled refinery due to its higher oxygen content compared to other lipid-based feedstocks. Life cycle analysis (LCA) using two distinct approaches—process-level energy allocation and a refinery-level marginal approach—has been conducted for each case. The LCA results using process-level allocation show that there are no noticeable changes in emissions or energy use impacts at the facility level. The life cycle GHG emission reductions of co-processing cases are mainly related to the fraction of biogenic carbon embedded in each fuel product. For example, co-processed jet fuels (a mixture of fossil and biogenic fuels) made via hydrotreating or hydrocracking have higher biogenic carbon, which results in jet fuel CI reductions of 3.9%–8.6% compared to the CI of baseline petroleum jet fuels on a WTW basis. However, analysis of co-processed pyrolysis oil in an FCC shows that a higher fraction of biofeedstocks (29%) becomes process emissions (i.e., CO and CO 2 ), mainly due to the oxygenates in pyrolysis oil, and so it generates less renewable fuel than biofeedstocks co-processed via hydrotreating or hydrocracking. Using the refinery-level marginal approach, the changes in energy use and emissions of co-processing cases compared to the petroleum-only baseline case are allocated to the changes in fuel production (assuming renewable fuels). This approach generates the life cycle GHG emission values of co-processed renewable fuels, which are comparable to the CIs of standalone biofuel production pathways. However, as this approach relies on a rough assumption that product yields and emissions from co-processing units on fossil feedstocks remain the same with and without biofeedstock inputs, co-processing cases like FCC pyrolysis oil may generate quite skewed results.

02 PETROLEUM↗
DOE OSTI2025

Modelling the Effects of Wetland Restoration on Coastal Hydrology: A Case Study of Elkhorn Slough Watershed, California

ABSTRACT Coastal wetlands, some of the most productive ecosystems on Earth, provide critical ecosystem services, including support of biodiversity, carbon sequestration and flood protection. In recent decades, these ecosystems have experienced extensive coastal wetland loss. Coastal wetland restoration provides a beacon of hope, offering a chance to reclaim these important habitats. However, even with billions of dollars invested worldwide in restoring coastal wetlands, we still lack comprehensive knowledge about the effectiveness of these restoration efforts in recovering wetland ecosystem functions and how future climate change may affect these efforts. The ability to evaluate how these ecosystems will function in the future is vital for examining current investments and developing future protection and management plans. We selected Elkhorn Slough, a tidal estuary, in California, to investigate the impact of wetland restoration and sea level rise (SLR) on coastal hydrology using the process‐based coastal hydrologic model, Advanced Terrestrial Simulator (ATS), informed by site‐specific data. We designed a novel modelling workflow for incorporating wetland restoration features into land cover and soil properties for the model parameterization. The validation results demonstrate a strong agreement between modelled and observed data. We studied the characteristics of coastal watershed hydrology, then focused on the surface water dynamics at two wetland sites within Elkhorn Slough, a reference site and a restored site. Our simulation results indicate that the restored site successfully maintains surface elevation, resulting in reduced surface inundation. We also examined the impact of wetland restoration under expected SLR over the next few decades. The low‐lying Yampah Marsh, the reference site, is likely to be inundated due to future SLR when highest tides arrive, while a higher percentage of Hester Marsh, the restored site, would retain marsh vegetation in coming decades, regardless of tidal conditions. Our study provides important information for examining the outcome of restoration practices that include surface elevation in tidal wetlands under climate changes.

advanced terrestrial simulator↗
DOE OSTI2020

FY2020 Fourth Quarter Performance Metric: Evaluate Improvement in Simulations of Mesoscale Convective Systems from New Parameterization Developments in E3SM

Mesoscale convective systems (MCSs) consist of an assembly of cumulonimbus clouds on scales of 100 km or more and produce mesoscale circulations (Houze, 2004, 2018). As the largest form of deep convective storms, MCSs contribute to 30% – 70% of annual and warm season rainfall in the U.S. and in the global tropics (Houze 2018; Stevenson & Schumacher, 2014; Feng et al., 2019; Haberlie & Ashley, 2019). Since MCSs contribute importantly to mean and extreme precipitation in the U.S. and many other regions around the world, understanding how well they are simulated by E3SM may guide future development towards more skillful modeling of convective storms and associated hydrologic impacts. The FY2020 Second Quarter Performance Metric Report documented comparisons of MCSs in the central and eastern U.S. in a high-resolution simulation produced by E3SM v1 at 25 km resolution (Caldwell et al. 2019) with observations. MCSs in the simulation occur less frequently and produce less intense precipitation, resulting in large underestimation of MCS volumetric rain-rate compared to observations. The first and third quarter performance metric report indicated that these model biases in simulating MCSs can be attributed to model limitations in parameterizing convection, clouds, and other related processes, as well as model biases in simulating the MCS large-scale environment. In the current FY2020 Fourth Quarter Performance Metric Report, we evaluate MCSs simulated in E3SM with several new developments in convection parameterizations that are being developed for its next generation. The goal is to summarize what have been improved with the new developments and highlight what need more work in the future.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2002

Measuring the Resilience of Advanced Life Support Systems

Despite the central importance of crew safety in designing and operating a life support system, the metric commonly used to evaluate alternative Advanced Life Support (ALS) technologies does not currently provide explicit techniques for measuring safety. The resilience of a system, or the system s ability to meet performance requirements and recover from component-level faults, is fundamentally a dynamic property. This paper motivates the use of computer models as a tool to understand and improve system resilience throughout the design process. Extensive simulation of a hybrid computational model of a water revitalization subsystem (WRS) with probabilistic, component-level faults provides data about off-nominal behavior of the system. The data can then be used to test alternative measures of resilience as predictors of the system s ability to recover from component-level faults. A novel approach to measuring system resilience using a Markov chain model of performance data is also developed. Results emphasize that resilience depends on the complex interaction of faults, controls, and system dynamics, rather than on simple fault probabilities.

Bell, Ann Maria↗
DOE OSTI2025

Trade-offs among restored ecosystem functions are context-dependent in Mediterranean-type regions

Global biodiversity hotspots, including Mediterranean-type ecosystems worldwide, are highly threatened by global change that alters biodiversity, ecosystem functions, and services. Some restoration activities enhance ecosystem functions by reintroducing plant species based on known relationships between plant traits and ecosystem processes. Achieving multiple functions across different site conditions, however, requires understanding how abiotic factors like climate and soil, along with plant assemblages, influence ecosystem functions, including their trade-offs and synergies. We used the ModEST ecosystem simulation model, which integrates carbon, water, and nutrient processes with plant traits, to assess the relationships between restored plant assemblages and ecosystem functions in Mediterranean-type climates and soils. We investigated whether maximised carbon increment, water use efficiency, and nitrogen use efficiency, along with their trade-offs and synergies, varied across different abiotic contexts. Further, we asked whether assemblages that maximised functions varied across environments and among these functions. We found that maximised ecosystem carbon increment and nitrogen use efficiency occurred under moist, warm conditions, while water use efficiency peaked under drier conditions. Generally, the assemblage that maximised one function differed from those for other maximised functions. Synergies were rare, except between water and nitrogen use efficiencies in loam soils across most climates. Trade-offs among maximised functions were common, varying in strength with abiotic context and plant assemblages, and were more pronounced in sandy loam soils compared to clay-rich soils. Our findings suggest that due to variation in abiotic conditions within and across Mediterranean-type regions at the global scale, site-specific plant assemblages are required to maximise ecosystem functions. Thus, lessons from a single site cannot be transferred to another site, even where the same plant functional types are available for restoration. Our simulation results offer valuable insights into potential ecosystem performance under specific abiotic conditions following restoration with particular plant functional types, thereby informing local restoration efforts.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRSDate not supplied

Martian B Storm Evolution: Modeling Dust Activity over the Receding South Polar CO 2 Ice Cap at Southern Hemisphere Summer Solstice

Observations of annually recurring, elevated (25 km) atmospheric warming and associated dust concentrations over the south polar cap near Southern Hemisphere (SH) summer solstice are the defining features of the regional dust storm known as the B storm [1]. Our observational analysis of MCS and TES temperature and dust retrievals include all Mars Years (MY) lacking a global dust storm (GDS) between MY 26 and MY 33 (Figure 1). The data indicate the B storm is initiated around perihelion (L s =252°) in the southern midlatitudes and reaches maximum height and intensity over the south pole near SH summer solstice at L s ~267°. At peak intensity, mid-level atmospheric temperatures are elevated by as much as 30 K and mid-level atmospheric dust mixing ratios are more than triple pre-B storm levels (1.5-2 ppm to 7-8 ppm). Cap edge lifting may contribute significantly to initial dust mobilization in the B storm since surface wind stress along the receding cap edge is likely strengthened by the combined effects of the sea breeze circulation and katabatic winds at this time of year [2, 3, 4]. We are investigating dust lifting and lofting near the south pole of Mars during SH summer using the NASA Ames Mars Global Climate Model (MGCM). The NASA Ames MGCM is a finite-volume numerical model with a cubed sphere grid ideal for modeling processes at high latitudes. Initial simulations at low resolution (4x4 degrees) capture some elevated dust and associated warming at the south pole around L s =265°, but the model fails to capture the intensity of the B storm. We will examine and present the model-predicted surface stress and vertical velocities near the receding seasonal CO 2 cap edge and at the south pole during solstice. Finally, we will present higher resolution simulations to better capture small-scale dynamics and features at the pole.

Courtney M. L. Batterson↗
DOE OSTI2024

IMPACT: Design of Integrated Multiphysics Producible Additive Components for Turbomachinery

The overall objective of the IMPACT program was to enable a dramatic reduction in design maturation time for an additive hot-section turbomachinery component through the following: • A fast crack-risk producibility surrogate model generated from machine learning applied to additive process simulation data generated via exascale computing, • Linking this surrogate model to multi-physics topology optimization (TO) to enable the creation of producible, near-optimal structural/thermal designs for additive hot-section components, • Maturing this toolset to reduce hot-section component design-for-manufacturing iterations by a large fraction, and eventually, • Using these tools to develop more efficient gas turbines in much shorter design cycle times.

42 ENGINEERING↗