Search NASA⌕ Search

SEARCH · Search NASA

Results for “projected gradient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

The Largest Accelerators and Colliders of Their Time

The Study Group for a GeV-scale Proton Synchrotron was launched in 1952 at CERN. Initially, an up-scaled version of the 3 GeV Cosmotron was considered but soon a new design based on the newly discovered alternating-gradient principle and promising a proton energy of 30 GeV was adopted by the CERN Council in the same year. In order to limit cost the energy was subsequently limited to 25 GeV and the project led by J.B. Adams was approved in 1953. The final parameters were fixed in 1954 and construction started in 1955. The CPS [1] became operational towards the end of 1959 reaching an energy of 28 GeV [2, 3]. It has turned out to be an extremely versatile facility [4] (Table 10.1).

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

Gradient-based constrained optimization using a database of linear reduced-order models

A methodology grounded in model reduction is presented for accelerating the gradient-based solution of a family of linear or nonlinear constrained optimization problems where the constraints include at least one linear Partial Differential Equation (PDE). A key component of this methodology is the construction, during an offline phase, of a database of pointwise, linear, Projection-based Reduced-Order Models (PROM)s associated with a design parameter space and the linear PDE(s). A parameter sampling procedure based on an appropriate saturation assumption is proposed to maximize the efficiency of such a database of PROMs. A real-time method is also presented for interpolating at any queried but unsampled parameter vector in the design parameter space the relevant sensitivities of a PROM. The practical feasibility, computational advantages, and performance of the proposed methodology are demonstrated for several realistic, nonlinear, aerodynamic shape optimization problems governed by linear aeroelastic constraints.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2017

Post Irradiation Examination of SiC Tube Subjected to Simultaneous Irradiation and Radial High Heat Flux

Silicon carbide (SiC) based composite is considered among leading candidate materials for accident tolerant fuel (ATF) cladding in light water reactors (LWRs) because of its outstanding irradiation and oxidation resistance, as well as low neutron absorption. Under normal operation conditions, the synergism between neutron irradiation and a high radial heat flux though the cladding thickness is expected to produce significant stress. This stress is attributed to a significant through-thickness temperature gradient and the resulting differential swelling strain due the highly temperature-dependent point-defect swelling of SiC. Although modeling of the in-pile stress state of SiC cladding has been conducted using finite element analysis, the analysis is challenging because of the complex stress state that depends upon swelling, irradiation creep, and thermal conductivity, all of which are both temperature and dose-dependent. These integral models have not yet been verified by experiments. In order to experimentally validate the multi-physics thermo-mechanical models of ATF SiC cladding during operation, SiC tube specimens have been irradiated under a high radial heat flux. This paper reports preliminary results from the post-irradiation examination (PIE) in on-going project supported by the U.S. Department of Energy's Nuclear Science User Facility program. The objectives of the PIE are (1) determination of the irradiation temperature distribution within the tube specimens, and (2) evaluation of the state and magnitude of the stress within the tube specimens arising from the temperature gradient. This paper mainly presents findings for objective (1)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Thermopile Energy Harvesting for Subsurface Wellbore Sensors (Final Report)

Robust in situ power harvesting underlies all efforts to enable downhole autonomous sensors for real-time and long-term monitoring of CO 2 plume movement and permeance, wellbore health, and induced seismicity. This project evaluated the potential use of downhole thermopile arrays, known as thermoelectric generators (TEGs), as power sources to charge sensors for in situ real-time, long-term data capture and transmission. Real-time downhole monitoring will enable “Big Data” techniques and machine learning, using massive amounts of continuous data from embedded sensors, to quantify short- and long-term stability and safety of enhanced oil recovery and/or commercial-scale geologic CO 2 storage. This project evaluated possible placement of the TEGs at two different wellbore locations: on the outside of the casing; or on the production tubing. TEGs convert heat flux to electrical power, and in the borehole environment, would convert heat flux into or out of the borehole into power for downhole sensors. Such heat flux would be driven by pumping of cold or hot fluids into the borehole—for instance, injecting supercritical CO 2 —creating a thermal pulse that could power the downhole sensors. Hence, wireless power generation could be accomplished with in situ TEG energy harvesting. This final report summarizes the project’s efforts that accomplished the creation of a fully operational thermopile field unit, including selection of materials, laboratory benchtop experiments and thermal-hydrologic modeling for design and optimization of the field-scale power generation test unit. Finally, the report describes the field unit that has been built and presents results of performance and survivability testing. The performance and survivability testing evaluated the following: 1) downhole power generation in response to a thermal gradient produced by pumping a heated fluid down a borehole and through the field unit; and 2) component survivability and operation at elevated temperature and pressure conditions representative of field conditions. The performance and survivability testing show that TEG arrays are viable for generating ample energy to power downhole sensors, although it is important to note that developing or connecting to sensors was beyond the scope of this project. This project’s accomplishments thus traversed from a low Technical Readiness Level (TRL) on fundamental concepts of the application and modeling to TRL-5 via testing of the fully integrated field unit for power generation in relevant environments. A fully issued United States Patent covers the wellbore power harvesting technology and applications developed by this project.

47 OTHER INSTRUMENTATION↗
DOE OSTI2016

An improved quasi-diabatic representation of the 1, 2, 3 1 A coupled adiabatic potential energy surfaces of phenol in the full 33 internal coordinates

In a previous project we constructed a quasi-diabatic representation, H d , of the 1, 2, 3 1 A adiabatic states of phenol from high level multireference single and double excitation configuration interaction electronic structure data, energies, energy gradients, and derivative couplings. That H d accurately describes surface minima, saddle points, and also regions of strong nonadiabatic interactions, reproducing the locus of conical intersection seams and the coordinate dependence of the derivative couplings. The present work determines the accuracy of H d for describing phenol photodissociation. Additionally, we demonstrate that a modest energetic shift of two diabats yields a quantifiably more accurate H d compared with experimental energetics. The analysis shows that in favorable circumstances it is possible to use single point energies obtained from the most reliable electronic structure methods available, including methods for which the energy gradients and derivative couplings are not available, to improve the quality of a global representation of several coupled potential energy surfaces. Our data indicate an alternative interpretation of kinetic energy release measurements near λ phot ~ 248 nm.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Symmetry restoration in mixed-spin paired heavy nuclei

The nature of the nuclear pairing condensates in heavy nuclei, specifically neutron-proton (spin-triplet), versus identical-particle (spin-singlet) pairing has been an active area of research for quite some time. In this work, we probe three candidates that should display spin-triplet, spin-singlet, and mixed-spin pairing. Using theoretical approaches such as the gradient method and symmetry-restoration techniques, we find the ground state of these nuclei in Hartree–Fock–Bogoliubov theory and compute ground state to ground state pair-transfer amplitudes to neighboring isotopes while simultaneously projecting to specific particle number and nuclear-spin values. We identify specific reactions for future experimental research that could shed light on spin-triplet and mixed-spin pairing.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

VTO_2021_APR_LLNL_Ye

Traditional batteries are composed of two-dimensional films that are stacked and/or rolled. Thin film batteries display high power density while their thick film counterparts show good energy density, but it has proven difficult to concurrently achieve both within these planar form factors. In addition, conventional Li-ion batteries based on liquid organic electrolytes or gel polymer electrolytes have raised severe safety concerns due to the intrinsic flammable properties of the organic electrolytes. They are also not ideal for the use of high energy density metallic lithium (Li) anodes due to Li dendrite growth, or sulfur cathodes due to shuttling effects that result in fast capacity fade. There is an urgent need to develop safe, high-performance solid-state batteries (SSBs) with advanced electrolyte and separator technologies. Although in recent years a series of superionic conductors have been developed for electrolytes and separators, their performance does not satisfy demanding criteria due to large impedance from poor solid electrolyte-electrode contact and questionable electrochemical and mechanical stability. Unlike the well-established roll-to-roll fabrication of conventional Li-ion batteries, the processing of SSBs is unique due to the brittleness of solid-state electrolytes (SSEs). The commercially available or lab-developed SSE discs are usually very thick (hundreds of micrometers to millimeters) to overcome their brittle nature, which unfortunately increases the cell impedance and accounts for the majority of the overall cell weight and volume, leading to dramatically decreased power and energy densities. In this project, we will investigate 3D printing techniques to overcome safety, fabrication, mechanical, and electrochemical issues in SSBs. 3D printing builds complex structures in a layer-by-layer fashion, which allows rapid production of hierarchical architectures, gradient and multi-material structures, and multi-component assemblies. 3D printing is an emerging area that could fundamentally transform energy storage devices. For example, 3D printing can produce batteries with arbitrary form factors to fit a product’s specific volume requirements and can create interwoven electrode arrangements over a wide range of length scales to improve transport and increase power density for a given energy density. For SSBs, 3D printing may dramatically reduce the separator thickness from ~1 mm (by hydraulic pressing) to tens of micrometers or less. In addition, the interfacial contact area between the electrolyte and the electrode may be increased via 3D interdigitated designs. Hence, we expect a significant reduction of the overall cell impedance and enhancement of both energy and power densities of SSBs by harnessing an array of 3D printing technologies being developed at Lawrence Livermore National Laboratory (LLNL).

25 ENERGY STORAGE↗
DOE OSTI2022

Investigation of Scanning Droplet Cell Technology for Electrochemical Deposition of Custom Three-Dimensional Alloys

The goal of this project was to assess the feasibility of a new method of electroplating, which we have termed “electroprinting”, for fabricating millimeter to centimeter metal parts with full density, and eventually, with bespoke 3D internal density patterns. Alloys, gradients and varying density is beyond the scope of this work, and efforts were focused on developing the technology to be capable of printing solid parts, beyond the lines and columns previously reported in the literature. Enabling this technology would expand the design space possible for the WPD program, allowing for smooth and complex density gradients in parts rather than discrete density steps between multilayers. We successfully designed and built an electroprinting apparatus, capable of printing copper in customizable 1-D patterns, which can be printed in stacked layers to form 3D parts. We successfully characterized the flat printed patterns, however, have encountered difficulty in characterizing multilayer prints. We have partially addressed the feasibility question, by developing the method for electroprinting 3D parts, however, some questions about the internal porosity and density of these parts still remain.

36 MATERIALS SCIENCE↗
DOE OSTI2026

SSR APPLIED – Automated Power Plants: Intelligent, Efficient and Digitised (V.2)

This report describes work undertaken during the SSR APPLIED project. The focus of the project has been on the development of digital twins to de-risk licensing of improved operating and maintenance practices. The operation of a bespoke flowing separate effects molten salt loop at ANL, with realistic temperature gradients, will provide invaluable data for computer codes validation. Three digital twins of aspects of the SSR-W have been successfully developed using ANL expertise and software. These digital twins have demonstrated optimization of the fuel cycle, the ability to model transients using an integrated coupled neutronic – thermal-hydraulic model with a model of the fuel expansion feedback so important to the inherent safety of the SSR-W. Advanced machine learning techniques have been developed and demonstrated for optimization of heat exchanger operation and maintenance.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
NASA NTRS2017

Cryogenic Refractive Index of Heraeus Homosil Glass

This paper reports measurements of the refractive index of Homosil (Heraeus) over the wavelength range of 0.34-3.16 microns and temperature range of 120-335 K. These measurements were performed by using the Cryogenic High Accuracy Refraction Measuring System (CHARMS) facility at the NASAs Goddard Space Flight Center. These measurements were in support of an integrated Structural-Thermal-Optical-Performance (STOP) model that was developed for a field-widened Michelson interferometer that is being built and tested for the High Spectral Resolution Lidar (HSRL) project at the NASA Langley Research Center (LaRC). The cryogenic refractive index measurements were required in order to account for the highly sensitivity performance of the HSRL instrument to changes in refractive index with temperature, temperature gradients, thermal expansion, and deformation due to mounting stresses. A dense coverage of the absolute refractive index over the aforementioned wavelength and temperature ranges was used to determine the thermo-optic coefficient (dn/dT) and dispersion relation (dn/d(lamda)) as a function of wavelength and temperature. Our measurements of Homosil will be compared with measurements of other glasses from the fused silica family studied in CHARMS as well as measurements reported elsewhere in literature.

cryogenic↗
NASA NTRS2017

Cryogenic Refractive Index of Heraeus Homosil Glass

This paper reports measurements of the refractive index of Homosil (Heraeus) over the wavelength range of 0.343.16 m and temperature range of 120335 K. These measurements were performed by using the Cryogenic High Accuracy Refraction Measuring System (CHARMS) facility at the NASAs Goddard Space Flight Center. These measurements were in support of an integrated Structural-Thermal-Optical-Performance (STOP) model that was developed for a field-widened Michelson interferometer that is being built and tested for the High Spectral Resolution Lidar (HSRL) project at the NASA Langley Research Center (LaRC). The cryogenic refractive index measurements were required in order to account for the highly sensitivity performance of the HSRL instrument to changes in refractive index with temperature, temperature gradients, thermal expansion, and deformation due to mounting stresses. A dense coverage of the absolute refractive index over the aforementioned wavelength and temperature ranges was used to determine the thermo-optic coefficient (dndT) and dispersion relation (dnd) as a function of wavelength and temperature. Our measurements of Homosil will be compared with measurements of other glasses from the fused silica family studied in CHARMS as well as measurements reported elsewhere in literature.

Homosil↗
NASA NTRSDate not supplied

The Response of the Quasi-Biennial Oscillation to Increased CO and its Modulation by Composition Feedbacks

The Quasi-Biennial Oscillation (QBO) impacts the large-scale circulation by altering lower stratospheric meridional temperature gradients which alter the propagation of upward propagating planetary waves. Proposed teleconnections of the QBO include impacts on the stratospheric polar vortices, extratropical surface winter climate, and the Madden-Julian Oscillation. However, long-term projections of the QBO remain highly uncertain. While recent multi-model investigations (Richter et al. 2019, Butchart et al. 2020) show that the amplitude of the QBO weakens robustly among models, changes in QBO period and stability remain highly uncertain. Here we examine the QBO response to increased greenhouse gases using the NASA Goddard Institute for Space Studies Middle Atmosphere Model E2.2 (Rind et al., 2020; Orbe et al. 2020). Compared to lower vertical resolution versions of ModelE, E2.2 also has a higher model top (0.002 hPa) and employs additional interactive non-orographic gravity wave drag sources from convection and shear, which produce a sufficiently realistic QBO, thus rendering it suitable for use in climate change studies. Overall, we find that both the QBO period and amplitude decrease in response to increased CO , the former related to increased lower stratospheric momentum fluxes (associated with convection) and the latter associated partly with a stronger residual mean circulation. Experiments integrated using fully interactive chemistry also reveal that ozone feedbacks significantly impact the magnitude of the QBO amplitude response. Finally, integrations using fixed (pre-industrial) sea surface temperatures (SST) show that the QBO amplitude responds differently to rapid adjustments versus SST feedbacks, as compared to the QBO period.

Quasi-Biennial Oscillation↗
DOE OSTI2019

On the potential impact of a half-degree warming on cold and warm temperature extremes in mid-latitude North America

This study focuses on potential impacts of climate change on the early spring (March-April) temperature and its extremes in the mid-latitudes of North America, discriminated between the 1.5 °C and 2 °C levels of global warming, as projected by a suit of numerical experiments. The results suggest relatively mild seasonal average warming (0.25 °C-1.5 °C), but also an intensification of both warm and cold temperature extremes. Furthermore, the derived changes feature much stronger warming over the West of the United States and weak to no warming to the East, which is congruent with the ventilating effect of the intensified northerly wind over central Canada and the East of the United States. The intensified northerly component of the mid-latitude jet is likely a contributing factor to the derived increased seasonal variability of March-April temperatures over parts of Manitoba and Ontario in Canada, and the Midwest of the United States. The projected changes in temperature extremes agree to some extent with the previous studies: Warm extremes intensify especially over southern mid-latitudes, while cold extremes are weakening over the north mid-to high-latitudes. However, high-resolution simulations with the Community Atmospheric Model 5 (CAM5) indicate much sharper spatial gradients, which translate into higher magnitudes and also more complex patterns of changes. Particularly, cold extremes feature not only reductions north of ~45°N latitudes, but also a very strong intensification of cold extremes (by-4 °C for 20 year return values) in the band 25°-45°N, centered in the Midwest of the United States. While general warming and intensification of the warm extremes may accelerate the arrival of early spring, the intensifying cold extremes may increase the risk of early spring frost damage, and hence may yield a profound impact on the regional agriculture of North America. Combined with reliable information on expected temperature variability at interannual-to-decadal timescales, the background longer-term projections can help inform decision makers in the food security sector.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Integration of LIBS with Machine Learning for Real-Time Monitoring of Feedstock in H 2 Gasification Applications

This project, funded by the U.S. Department of Energy (DOE) – Office of Fossil Energy under Award Number DE-FE0032177, aimed to assess the feasibility of an integrated Laser-Induced Breakdown Spectroscopy (LIBS) system with advanced machine learning (ML) models for real-time characterization and potential control of hydrogen gasifiers running on waste materials as feedstocks. This was a multidisciplinary effort that encompassed the acquisition and standardized analysis of individual and blended feedstocks—comprising biomass, coal waste, and plastic waste, followed by the development of a dynamic LIBS bench system for material sample analysis and development of predictive ML models. Comprehensive laboratory testing enabled the creation of a robust elemental dataset that served as the foundation for ML model training. Techniques such as Random Forest, Gradient Boosting, Support Vector Regression, and Neural Networks were employed to predict key feedstock properties, including higher heating value (HHV), moisture content, thermal conductivity, and ash composition with high accuracy. The results were validated against experimental data and demonstrated strong potential for real-time application in gasifier control systems. The project concluded with a study on the integration of the LIBS+ML approach for gasifier control and a techno-economic analysis of the implementation of the approach into hydrogen (H 2 ) gasification systems. Dissemination of results was carried out at a DOE meeting. This work establishes a scalable framework for automated, in-line feedstock quality assessment, offering significant implications for process optimization and emissions reduction in hydrogen production.

01 COAL, LIGNITE, AND PEAT↗
NASA NTRS1994

The gradient of meteorological and chemical variables across the tropopause

The downward transport of air through the tropopause can bring substantial amounts of ozone and reactive nitrogen into the upper troposphere. In this cold region of the atmosphere, O3 is particularly effective as a greenhouse gas. As part of the North Dakota Thunderstorm Project in June 1989, the NCAR Sabreliner made five flights through the tropopause. We measured ozone, nitric oxide (NO), total reactive nitrogen (NO(y)), carbon monoxide (CO), and water vapor (H2)), and took grab samples for hydrocarbon (HC) analysis. Hydrocarbons, CO, and H2O, species with sources primarily at the earth's surface, showed a strong concentration decrease with increasing altitude, while O3 and NO(y), species with a source in the stratosphere, showed a strong concentration increase with increasing altitude. Stratospheric concentrations of NO(x), NO(y), and H2O were all high relative to winter observations made during NASA's AASE. We suggest that midlatitude thunderstorms may inject wet, NO-rich air into the lower stratosphere. Calculation based on measured ratios of NO(x) and NO(y) to O3 yield a total flux of reactive nitrogen from the Northern Hemisphere stratosphere into the troposphere of 1 to 2 Tg(N) yr(exp -1) with about 8 percent in the form of NO(x). This value is higher than reported estimates of total stratospheric nitrogen fixation.

Dickerson, Russell R.↗
DOE OSTI2012

Changes in South Pacific rainfall bands in a warming climate

The South Pacific Convergence Zone (SPCZ) is the largest rainband in the Southern Hemisphere and provides most of the rainfall to southwest Pacific island nations. In spite of various modelling efforts, it remains uncertain how the SPCZ will respond to greenhouse warming. Using a hierarchy of climate models we show that the uncertainty of SPCZ rainfall projections in present-generation climate models can be explained as a result of two competing mechanisms. Higher tropical sea surface temperatures lead to an overall increase of atmospheric moisture and rainfall whereas weaker sea surface temperature gradients dynamically shift the SPCZ northeastward and promote summer drying in areas of the southwest Pacific. On the basis of a multi-model ensemble of 76 greenhouse warming experiments and for moderate tropical warming of 1–2 °C we estimate a 6% decrease of SPCZ rainfall with a multi-model uncertainty exceeding 20%. For stronger tropical warming exceeding 3 °C, a tendency for a wetter SPCZ region is identified.

58 GEOSCIENCES↗
DOE OSTI2014

The stable K0 giant star β Gem

A nine-season spectroscopic study of the photosphere of β Gem (K0 III) shows this low-luminosity giant to be stable, with no effective temperature variations above ∼2 K, and no secular temperature variations over the 2002-2010 time span above 0.2 K per year. The radial-velocity variations are consistent with an orbital variation of ∼40 m s{sup –1}. The projected rotation rate is found to be 1.70 ± 0.20 km s{sup –1} with a macroturbulence dispersion of 4.53 ± 0.10 km s{sup –1}. The third-signature plot is also invariant and shows a granulation velocity gradient 20% smaller than the solar gradient. The absolute shift of the third-signature plot gives a blueshift-corrected radial velocity of 3385 ± 70 m s{sup –1}. Bisector mapping of the Fe I λ6253 line yields a flux deficit of 12% ± 1% in area, somewhat smaller than for other giants, but the shape and the position of the peak at 4.8 km s{sup –1} is consistent with other giants. All of the investigated photospheric parameters are consistent with β Gem being a low-luminosity giant in agreement with its absolute magnitude.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2019

Spatial variation in oak ( Quercus spp.) radial growth responses to drought stress in eastern North America

Dendroecology provides a means to evaluate how mature trees have responded to climate stresses in the recent past and provides one approach for projecting how existing forests will respond to future climate change. This study documented spatial variation in the strength of growth–climate associations for six oak (Quercus) species at 284 sites in eastern North America that span substantial gradients of temperature and site water balance. Radial growth of oaks was more strongly related to growing-season precipitation and the ratio of precipitation to potential evapotranspiration at sites in the western part of the study region where drought conditions occur more frequently. Growth was more strongly related to growing-season mean maximum temperature in the warmer, southern part of the study region. Growth of oaks was not strongly related to site water balance or temperature in the northeastern part of the study region. These results indicate that if climate change results in increased growing-season drought stress, this will adversely affect mature oak trees growing in the southern and western parts of eastern North America, but oaks growing in northeastern North America have more safe space for change before they will suffer reduced growth and vigor.

Forestry↗