Search NASA⌕ Search

SEARCH · Search NASA

Results for “quantum diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Non-Fermi-liquid types of behavior associated with a magnetic quantum critical point in Sr ( Co 1 - x Ni x ) 2 As 2 single crystals

The compound SrCo 2 As 2 with the body-centered tetragonal ThCr 2 Si 2 structure is known to remain paramagnetic down to a temperature T = 0.05 K, but inelastic neutron scattering studies have shown that both ferromagnetic (FM) and antiferromagnetic (AFM) fluctuations occur in single crystals. Thus it is of interest to study how the magnetism evolves on doping SrCo 2 As 2 . Previous work on polycrystalline samples of Sr (Co 1-x Ni x ) 2 As 2 indicated the development of AFM order for 0 < x ≲ 0.3. Here we studied single crystals of Sr(Co 1-x Ni x ) 2 As 2 for 0 < x ≤ 1 and confirmed the occurrence of AFM order which we deduce to have a c -axis helix structure. We also find evidence for an unusual composition-induced magnetic quantum critical point at x ≈ 0.3 where non-Fermi-liquid types of behavior were revealed by heat capacity and electrical resisitivity measurements at low T. Electron-doped Sr (Co 1-x Ni x ) 2 As 2 single crystals with compositions x = 0 to 0.9 were grown out of self-flux and SrNi 2 As 2 single crystals out of Bi flux. The crystals were characterized using single-crystal x-ray diffraction (XRD) at room temperature, and magnetic susceptibility χ (H, T), isothermal magnetization M (H, T), heat capacity Cp (H, T), and electrical resistivity ρ (H, T) measurements versus applied magnetic field H and T. The XRD studies show that the system undergoes a continuous structural crossover from the uncollapsed-tetragonal (ucT) structure to the collapsed tetragonal (cT) structure with increasing Ni doping. The χ(T) data show that SrCo 2 As 2 exhibits an AFM ground state almost immediately upon Ni doping on the Co site. Ab initio electronic-structure calculations for x = 0 and 0.15 indicate that a flat band with a peak in the density of states just above the Fermi energy is responsible for this initial magnetic-ordering behavior on Ni doping. The AFM ordering is observed in the range 0.013 ≤ x ≤ 0.25 with the ordered moments aligned in the ab plane and with a maximum ordering temperature T N = 26.5 K at x = 0.10. The Curie-Weiss-like T dependence of χ in the paramagnetic (PM) state indicates dominant FM interactions. The behavior of the anisotropic susceptibilities below T N suggests a planar helical magnetic ground state with a composition-dependent pitch based on a local-moment molecular-field-theory model, with FM interactions in the ab plane and weaker AFM interactions along the helix c axis. However, the small ordered (saturation) moments ~0.1 μ B per transition metal atom, where μ B is the Bohr magneton, and the values of the Rhodes-Wohlfarth ratio indicate that the magnetism is itinerant. The high-field M (H) isotherms and the low-field χ-1 ( T > T N ) data were successfully analyzed within the framework of Takahashi's theory of FM spin fluctuations. The C p (T) at low T exhibits Fermi-liquid behavior for 0 ≤ x ≤ 0.15 , whereas an evolution to a logarithmic non-Fermi-liquid (NFL) behavior is found for x = 0.2 to 0.3. The logarithmic dependence is suppressed in an applied magnetic field. The low- T ρ ( H = 0 , T ) data show a T 2 dependence for 0 ≤ x ≤ 0.20 and a power-law dependence ρ (H = 0, T) = ρ 0 + AT n with n < 2 for x = 0.20 and 0.30. The exponent n shows a notable field dependence, suggesting both doping- and magnetic-field-tuned quantum critical phenomena. These low- T NFL types of behavior observed in the C p and ρ measurements are most evident near the quantum critical concentration x ≈ 0.3 at which a T = 0 composition-induced transition from the AFM phase to the PM phase occurs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Extensively Microtwinned Diamond with Nanolaminates of Lonsdaleite Formed by Flash Laser Heating of Glassy Carbon

Diamond’s unique properties on the nanoscale make it one of the most important materials for use in biosensors and quantum computing and for components that can withstand the harsh environments of space. We synthesize oriented, faceted diamond particles by flash laser heating of glassy carbon at 16 GPa and 2300 K. Detailed transmission electron microscopy shows them to consist of a mosaic of diamond nanocrystals frequently joined at twin boundaries forming microtwins. Striking 3-fold translational periodicity was observed in both imaging and diffraction. This periodicity was shown to originate from nanodimensional wedge-shaped overlapping regions of twinned diamond and not from a possible 9R polytype, which has also been reported in other group IVa elements and water ice. Extended bilayers of hexagonal layer stacking were observed, forming lonsdaleite nanolaminates. In conclusion, the particles exhibited optical fluorescence with a rapid quench time (<1 ns) attributed to their unique twinned microstructure.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A flexible neutron spectrometer concept with a new ultra-high field steady-state vertical-bore magnet

The proposed facility explores materials under ultra-high magnetic fields. By combining the power of high fields to tune materials and of neutron scattering to probe the resulting changes down to the atomic scale, this facility will enable transformative progress in the study of quantum materials and is named for the “TITAN” subset of Greek gods to reflect this transformation. TITAN will offer DC magnetic fields up to at least 20 T. Exploiting the record brightness and bandwidth of the Second Target Station at the Spallation Neutron Source, TITAN will probe atomic-scale responses through high efficiency neutron spectroscopy up to 80 meV energy transfer, high resolution diffraction, and small angle neutron scattering. Focusing neutron optics will maximize flux on accurately positioned samples, while radial collimation and optimized shielding and detection strategies will minimize backgrounds.

47 OTHER INSTRUMENTATION↗

Persistence of charge density wave fluctuations in the absence of long-range order in a hole-doped kagome metal

The kagome metals 𝐴⁢V 3 ⁢Sb 5 (𝐴=K, Rb, Cs) exhibit a complex interplay between charge density wave (CDW) order and superconductivity. Here, in this study, we use ultrafast coherent phonon spectroscopy to probe the evolution of CDW order in hole-doped CsV 3 ⁢Sb 5−𝑥 ⁢Sn 𝑥 across a broad range of compositions (0 ≤ 𝑥 ≤ 0.68). While thermodynamic and diffraction measurements show long-range CDW order vanishes above 𝑥 ≈ 0.05, we observe persistent signatures of CDW fluctuations up to the highest doping levels, with correlation times on the order of several picoseconds. These results indicate the presence of a robust fluctuating charge order that survives well beyond the established CDW phase boundary. Furthermore, these fluctuations are enhanced near a doping-tuned quantum phase transition at 𝑥* ≈ 0.15, which coincides with a local minimum in the superconducting 𝑇 c double-dome. Additional measurements on Ti- and K-substituted samples confirm that this behavior is intrinsic to hole doping and not tied to disorder. Overall, our findings suggest that CDW fluctuations play a central role in the electronic phase diagram of 𝐴⁢V 3 ⁢Sb 5 and may mediate or compete with superconductivity.

Kongruengkit, Terawit [Univ. of California, Santa ↗

Ferrimagnetic 120 ° magnetic structure in Cu 2 OSO 4

We report magnetic properties of a 3d 9 (Cu 2+ ) magnetic insulator Cu 2 OSO 4 measured on both powder and single crystal. The magnetic atoms of this compound form layers whose geometry can be described either as a system of chains coupled through dimers or as a kagome lattice where every third spin is replaced by a dimer. Specific heat and DC susceptibility show a magnetic transition at 20 K, which is also confirmed by neutron scattering. Magnetic entropy extracted from the specific heat data is consistent with an S=1/2 degree of freedom per Cu 2+ , and so is the effective moment extracted from DC susceptibility. The ground state has been identified by means of neutron diffraction on both powder and single crystal and corresponds to an ~120° spin structure in which ferromagnetic intradimer alignment results in a net ferrimagnetic moment. No evidence is found for a change in lattice symmetry down to 2 K. Finally, our results suggest that Cu 2 OSO 4 represents a type of model lattice with frustrated interactions where interplay between magnetic order, thermal and quantum fluctuations can be explored.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pressure-Stabilized MnSb2 with Complex Incommensurate Magnetic Order

Marcasite-type compounds have been proposed as promising hosts of exotic magnetic quantum states, yet experimental realizations in stoichiometric, disorder-free systems remain limited. Here, we report the high-pressure stabilization and magnetic characterization of MnSb2, a marcasite-type compound that is thermodynamically metastable under ambient pressure. Single crystals were synthesized using a cubic multianvil press at 3.3 GPa and 490 °C for 24 h, and powder and single-crystal X-ray diffraction confirm the orthorhombic Pnnm structure. These crystals are stable at ambient pressure for a long time up to between 450 and 500 K. Heat-capacity measurements reveal phase transitions at approximately T0 ∼ 118 K and T1 ∼ 220 K. Neutron diffraction uncovers an unconventional magnetic state below T1 ∼ 220 K. Magnetic powder neutron diffraction refinements reveal possible multiple magnetic configurations that provide comparably acceptable fits to the experimental data. While most solutions are consistent with a spin-density-wave (SDW) description, helical models systematically yield inferior agreement factors. Across a broad range of models, the Mn ordered moment reaches a maximum value of approximately 2 μB and remains predominantly collinear, with minimal canting along the c-axis. At 200 K, the magnetic propagation vector is q = (0, 0.3975, 0.3783); upon cooling, the b component increases toward 0.5, reflecting a temperature-dependent evolution of the modulation. The need for modification of the magnetic model between high and low temperatures further highlights the complex and strongly temperature-dependent nature of the magnetic order in this system. These results establish MnSb2 as a pressure-stabilized marcasite magnet with a tunable, complex magnetic state and a compelling stoichiometric platform for exploring unconventional magnetic behavior, including potential altermagnetism.

Xu, Mingyu [Michigan State University , , , ,; Iow↗

Large Hyperfine Coupling Arising from Pseudo- 2 S Ground States in a Series of Lutetium(II) Metallocene Complexes

The synthesis of molecules with strong coupling between electronic and nuclear spins represents an important challenge in molecular quantum information science. Here, we report the synthesis and characterization of the divalent lutetium metallocene complexes Lu(Cp Me 5 )(Cp iPr 5 ) (Cp Me 5 = pentamethylcyclopentadienyl; Cp iPr 5 = pentaisopropylcyclopentadienyl), Lu(Cp iPr 4 Et ) 2 (Cp iPr 4 Et = ethyltetraisopropylcyclopentadienyl), and Lu(Cp iPr 4 ) 2 (Cp iPr 4 = tetraisopropylcyclopentadienyl). The molecular structures of these complexes, as determined through singlecrystal X-ray diffraction, feature a common bent sandwich geometry, with average Cp–Lu–Cp angles ranging from 159.9° to 152.6°. Analysis of continuous-wave electron paramagnetic resonance (EPR) spectra for the complexes reveals nearly isotropic g tensors with only a slight deviation from that of a free electron. Moreover, an extremely large splitting of the eight-line spectra indicates the presence of strong hyperfine coupling, and simulations provide isotropic hyperfine coupling constants of A iso = 4.38, 4.30, and 4.17 GHz across the series, where the value of A iso is found to decrease as the Cp–Lu–Cp angle becomes more acute. Notably, these values are the largest yet observed for any lanthanide complex. Moreover, EPR and computational analysis show that the large values of A iso stem from large s-orbital character up to 41.2% in the corresponding singly occupied molecular orbitals. To our knowledge, this degree of s-character in a molecular orbital is the largest yet reported for an open-shell isolable complex. These results outline a general strategy toward the isolation of paramagnetic molecules with strong hyperfine coupling and highly isotropic doublet electronic ground states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Revisiting the Kitaev material candidacy of Ir 4 + double perovskite iridates

Quantum magnets with significant bond-directional Ising interactions, so-called Kitaev materials, have attracted tremendous attention recently in the search for exotic spin liquid states. Here we present a comprehensive set of measurements that enables us to investigate the crystal structures, Ir 4+ single-ion properties, and magnetic ground states of the double perovskite iridates La 2 BIrO 6 (B = Mg, Zn) and A 2 CeIrO 6 (A = Ba, Sr) with a large nearest-neighbor distance >5 angstrom between Ir 4+ ions. Our neutron powder diffraction data on Ba 2 CeIrO 6 can be refined in the cubic space group Fm$\overline{3}$m, while the other three systems are characterized by weak monoclinic structural distortions. Despite the variance in the noncubic crystal field experienced by the Ir 4+ ions in these materials, x-ray absorption spectroscopy and resonant inelastic x-ray scattering are consistent with J eff = 1/2 moments in all cases. Furthermore, neutron scattering and resonant magnetic x-ray scattering show that these systems host A-type antiferromagnetic order. These electronic and magnetic ground states are consistent with expectations for face-centered-cubic magnets with significant antiferromagnetic Kitaev exchange, which indicates that spacing magnetic ions far apart may be a promising design principle for uncovering additional Kitaev materials

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural and thermodynamic limits of layer thickness in 2D halide perovskites

In the fast-evolving field of halide perovskite semiconductors, the 2D perovskites (A') 2 (A) n -1 M n X 3 n +1 [where A = Cs + , CH 3 NH 3 + , HC(NH 2 ) 2 + ; A' = ammonium cation acting as spacer; M = Ge 2+ , Sn 2+ , Pb 2+ ; and X = Cl - , Br - , I - ] have recently made a critical entry. The n value defines the thickness of the 2D layers, which controls the optical and electronic properties. The 2D perovskites have demonstrated preliminary optoelectronic device lifetime superior to their 3D counterparts. They have also attracted fundamental interest as solution-processed quantum wells with structural and physical properties tunable via chemical composition, notably by the n value defining the perovskite layer thickness. The higher members ( n > 5) have not been documented, and there are important scientific questions underlying fundamental limits for n . To develop and utilize these materials in technology, it is imperative to understand their thermodynamic stability, fundamental synthetic limitations, and the derived structure–function relationships. We report the effective synthesis of the highest iodide n -members yet, namely (CH 3 (CH 2 ) 2 NH 3 ) 2 (CH 3 NH 3 ) 5 Pb 6 I 19 ( n = 6) and (CH 3 (CH 2 ) 2 NH 3 ) 2 (CH 3 NH 3 ) 6 Pb 7 I 22 ( n = 7), and confirm the crystal structure with single-crystal X-ray diffraction, and provide indirect evidence for “(CH 3 (CH 2 ) 2 NH 3 ) 2 (CH 3 NH 3 ) 8 Pb 9 I 28 ” (“ n = 9”). Direct HCl solution calorimetric measurements show the compounds with n > 7 have unfavorable enthalpies of formation (Δ H f ), suggesting the formation of higher homologs to be challenging. Finally, we report preliminary n -dependent solar cell efficiency in the range of 9–12.6% in these higher n -members, highlighting the strong promise of these materials for high-performance devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

X-ray ptychography on low-dimensional hard-condensed matter materials

Tailoring structural, chemical, and electronic (dis-)order in heterogeneous media is one of the transformative opportunities to enable new functionalities and sciences in energy and quantum materials. This endeavor requires elemental, chemical, and magnetic sensitivities at the nano/atomic scale in two- and three-dimensional space. Soft X-ray radiation and hard X-ray radiation provided by synchrotron facilities have emerged as standard characterization probes owing to their inherent element-specificity and high intensity. One of the most promising methods in view of sensitivity and spatial resolution is coherent diffraction imaging, namely, X-ray ptychography, which is envisioned to take on the dominance of electron imaging techniques offering with atomic resolution in the age of diffraction limited light sources. In this review, we discuss the current research examples of far-field diffraction-based X-ray ptychography on two-dimensional and three-dimensional semiconductors, ferroelectrics, and ferromagnets and their blooming future as a mainstream tool for materials sciences.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Origin of the quasi-quantized Hall effect in ZrTe 5

The quantum Hall effect (QHE) is traditionally considered to be a purely two-dimensional (2D) phenomenon. Recently, however, a three-dimensional (3D) version of the QHE was reported in the Dirac semimetal ZrTe 5 . It was proposed to arise from a magnetic-field-driven Fermi surface instability, transforming the original 3D electron system into a stack of 2D sheets. Here, we report thermodynamic, spectroscopic, thermoelectric and charge transport measurements on such ZrTe 5 samples. The measured properties: magnetization, ultrasound propagation, scanning tunneling spectroscopy, and Raman spectroscopy, show no signatures of a Fermi surface instability, consistent with in-field single crystal X-ray diffraction. Instead, a direct comparison of the experimental data with linear response calculations based on an effective 3D Dirac Hamiltonian suggests that the quasi-quantization of the observed Hall response emerges from the interplay of the intrinsic properties of the ZrTe 5 electronic structure and its Dirac-type semi-metallic character.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic functionalization and catalytic behavior of magnetic nanoparticles during laser photochemical graphitization of polyimide

We report laser-assisted photochemical graphitization of polyimides (PIs) into functional magnetic nanocomposites using laser irradiation of PI in the presence of magnetite nanoparticles (MNPs). PI Kapton sheets covered with MNP were photochemically treated under ambient conditions using a picosecond pulsed laser (1064 nm) to obtain an electrically conductive material. Scanning electron microscopy of the treated material revealed a layered magnetic nanoparticle/graphite (MNP/graphite) nanocomposite structure. Four probe conductivity measurements indicated that the nanocomposite has an electrical conductivity of 1550 ± 60 S/m. Superconducting quantum interference device magnetometer-based magnetic characterization of the treated material revealed an anisotropic ferromagnetic response in the MNP/graphite nanocomposite compared to the isotropic response of MNP. Raman spectroscopy of the MNP/graphite nanocomposite revealed a fourfold improvement in graphitization, suppression in disorder, and decreased nitrogenous impurities compared to the graphitic material obtained from laser treatment of just PI sheets. X-ray photoelectron spectroscopy, x-ray diffraction, and energy-dispersive x-ray spectroscopy were used to delineate the phase transformations of MNP during the formation of MNP/graphite nanocomposite. Post-mortem characterization indicates a possible photocatalytic effect of MNP during MNP/graphite nanocomposite formation. Under laser irradiation, MNP transformed from the initial Fe 3 O 4 phase to γ-Fe 2 O 3 and Fe 5 C 2 phases and acted as nucleation spots to catalyze the graphitization process of PI.

36 MATERIALS SCIENCE↗

High–Performance NiCo 2 O 4 /Graphene Quantum Dots for Asymmetric and Symmetric Supercapacitors with Enhanced Energy Efficiency

For the sustainable growth of future generations, energy storage technologies like supercapacitors and batteries are becoming more and more common. However, reliable and high-performance materials’ design and development is the key for the widespread adoption of batteries and supercapacitors. Quantum dots with fascinating and unusual properties are expected to revolutionize future technologies. However, while the recent discovery of quantum dots honored with a Nobel prize in Chemistry, their benefits for the tenacious problem of energy are not realized yet. In this context, herein, chemical-composition tuning enabled exceptional performance of NiCo 2 O 4 (NCO)/graphene quantum dots (GQDs) is reported, which outperform the existing similar materials, in supercapacitors. A comprehensive study is performed on the synthesis, characterization, and electrochemical performance evaluation of highly functional NCO/GQDs in supercapacitors delivering enhanced energy efficiency. The high-performance, functional NCO/GQDs electrode materials are synthesized by the incorporation of GQDs into NCO. The effect of variable amount of GQDs on the energy performance characteristics of NCO/GQDs in supercapacitors is studied systematically. In-depth structural and chemical bonding analyses using X-ray diffraction (XRD) and Raman spectroscopic studies indicate that all the NCO/GQDs composites crystallize in the spinel cubic phase of NiCo 2 O 4 while graphene integration evident in all the NCO/GQDs. The scanning electron microscopy imaging analysis reveals homogeneously distributed spherical particles with a size distribution of 5–9 nm validating the formation of QDs. The high-resolution transmission electron microscopy analyses reveal that the NCOQDs are anchored on graphene sheets, which provide a high surface area of 42.27 m 2 g –1 and high mesoporosity for the composition of NCO/GQDs-10%. In addition to establishing reliable electrical connection to graphene sheets, the NCOQDs provide reliable 3D-conductive channels for rapid transport throughout the electrode as well as synergistic effects. Chemical-composition tuning, and optimization yields NCO/GQDs-10% to deliver the best specific capacitance of 3940 Fg –1 at 0.5 Ag –1 , where the electrodes retain ≈98% capacitance after 5000 cycles. The NCO/GQD-10%//AC asymmetric supercapacitor device demonstrates outstanding energy density and power density values of 118.04 Wh kg –1 and 798.76 W kg –1 , respectively. The NCO/GQDs-10%//NCO/GQDs-10% symmetric supercapacitor device delivers excellent energy and power density of 24.30 Wh kg –1 and 500 W kg –1 , respectively. These results demonstrate and conclude that NCO/GQDs are exceptional and prospective candidates for developing next-generation high-performance and sustainable energy storage devices.

25 ENERGY STORAGE↗

Probing boron vacancy defects in hBN via single spin relaxometry

Spin defects in solids offer promising platforms for quantum sensing and memory due to their long coherence times and optical addressability. Here, we integrate a single nitrogen-vacancy (NV) center in diamond with scanning probe microscopy to detect, read out, and spatially map spin-based quantum sensors at the nanoscale. Using the boron vacancy ($V$$^{–}_{B}$) center in hexagonal boron nitride—an emerging two-dimensional spin system—as a model, we detect its electron spin resonance indirectly via changes in the spin relaxation time (T 1 ) of a nearby NV center, eliminating the need for optical excitation or fluorescence detection of the $V$$^{–}_{B}$. Cross-relaxation between NV and $V$$^{–}_{B}$ ensembles significantly reduces NV T1, enabling quantitative nanoscale mapping of defect densities beyond the optical diffraction limit and clear resolution of hyperfine splitting in isotopically enriched h 10 B 15 N. Our method demonstrates interactions between spin sensors in 3D and 2D materials, establishing NV centers as versatile probes for characterizing otherwise inaccessible spin defects.

Quantum metrology↗

Demonstration of nearly pinhole-free epitaxial aluminum thin films by sputter beam epitaxy

Superconducting resonators with high quality factors have been fabricated from aluminum films, suggesting potential applications in quantum computing. Improvement of thin film crystal quality and removal of void and pinhole defects will improve quality factor and functional yield. Epitaxial aluminum films with superb crystallinity, high surface smoothness, and interface sharpness were successfully grown on the c-plane of sapphire using sputter beam epitaxy. This study assesses the effects of varying substrate preparation conditions and growth and prebake temperatures on crystallinity and smoothness. X-ray diffraction and reflectivity measurements yield extensive Laue oscillations and Kiessig thickness fringes for films grown at 200 °C under 15 mTorr Ar, indicating excellent crystallinity and surface smoothness; moreover, an additional substrate preparation procedure which involves (1) a modified substrate cleaning procedure and (2) prebake at 700 °C in 20 mTorr O 2 is shown by atomic force microscopy to yield nearly pinhole-free film growth while maintaining epitaxy and high crystal quality. The modified cleaning procedure is environmentally friendly and eliminates the acid etch steps common to conventional sapphire preparation, suggesting potential industrial application both on standard epitaxial and patterned surface sapphire substrates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quasiepitaxial Growth of Organic Crystalline Thin-Films

The presence of excitons at room temperature in organic semiconductors distinguish them from traditional semiconductors, providing exceptional opportunities for manipulating energy in a range of structures from LEDs, polariton lasers, transparent photovoltaics, and optical switches. However, control over crystalline order, orientation, and defect formation are crucial to the fabrication and optimization of these excitonic electronics. In this work we have demonstrated new routes and new understanding in the growth of ordered organic thin film crystals and multilayer crystals. These crystals are composed of incommensurate organic semiconductors with sustained azimuthal registry and controlled crystalline orientation grown from the bottom up. By probing a range of molecular pairings with in-situ and real-time diffraction, we have demonstrated that one of the driving forces behind this growth is the requirement of surface energy matching of the lowest energy crystalline planes, which is distinct from the requirements of lattice matching for inorganic epitaxy. We have also demonstrated a new route to non-equilibrium quasiepitaxial growth of crystalline organic multilayers through selective edge nucleation dynamics that could provide new control over molecular orientation in organic quantum wells. This work provides a more universal understanding of the key requirements for growth regimes that have been historically inaccessible and will enable enhanced excitonic devices

36 MATERIALS SCIENCE↗

Instrument Performance of GISMO, a 2 Millimeter TES Bolometer Camera used at the IRAM 30 m Telescope

In November of 2007 we demonstrated a monolithic Backshort-Under-Grid (BUG) 8x16 array in the field using our 2 mm wavelength imager GISMO (Goddard IRAM Superconducting 2 Millimeter Observer) at the IRAM 30 m telescope in Spain for astronomical observations. The 2 mm spectral range provides a unique terrestrial window enabling ground-based observations of the earliest active dusty galaxies in the universe and thereby allowing a better constraint on the star formation rate in these objects. The optical design incorporates a 100 mm diameter silicon lens cooled to 4 K, which provides the required fast beam yielding 0.9 lambda/D pixels. With this spatial sampling, GISMO will be very efficient at detecting sources serendipitously in large sky surveys, while the capability for diffraction limited imaging is preserved. The camera provides significantly greater detection sensitivity and mapping speed at this wavelength than has previously been possible. The instrument will fill in the spectral energy distribution of high redshift galaxies at the Rayleigh-Jeans part of the dust emission spectrum, even at the highest redshifts. Here1 will we present early results from our observing run with the first fielded BUG bolometer array. We have developed key technologies to enable highly versatile, kilopixel, infrared through millimeter wavelength bolometer arrays. The Backshort-Under-Grid (BUG) array consists of three components: 1) a transition-edge-sensor (TES) based bolometer array with background-limited sensitivity and high filling factor, 2) a quarter-wave reflective backshort grid providing high optical efficiency, and 3) a superconducting bump-bonded large format Superconducting Quantum Interference Device (SQUID) multiplexer readout. The array is described in more detail elsewhere (Allen et al., this conference). In November of 2007 we demonstrated a monolithic 8x 16 array with 2 mm-pitch detectors in the field using our 2 mm wavelength imager GISMO (Goddard IRAM Superconducting 2 Millimeter Observer) at the IRAM 30 m telescope in Spain for astronomical observations. The 2 mm spectral range provides a unique terrestrial window enabling ground-based observations of the earliest active dusty galaxies in the universe and thereby allowing a better constraint on the star formation rate in these objects. The optical design incorporates a 100 mm diameter silicon lens cooled to 4 K, which provides the required fast beam yielding 0.9 lambda1D pixels. With this spatial sampling, GISMO will be very efficient at detecting sources serendipitously in large sky surveys, while the capability for diffraction limited imaging is preserved. The camera provides significantly greater detection sensitivity and mapping speed at this wavelength than has previously been possible. The instrument will fill in the spectral energy distribution of high redshift galaxies at the Rayleigh-Jeans part of the dust emission spectrum, even at the highest redshifts. Here I will we present early results from our observing run with the first fielded BUG bolometer array.

Staguhn, Johannes↗

Fast and bright scintillators for ultrafast materials dynamics using 4th generation synchrotron

We present recent advances in fast and bright scintillators for ultrafast X-ray phase contrast imaging of dynamic materials experiments at the upgraded Advanced Photon Source (APS-U), a fourth generation synchrotron. APS-U enables hard X-ray imaging at frame rates of at least 13 MHz (corresponding to 77 ns or shorter interframe intervals), creating a new need for scintillators with faster response and higher light output than lutetium yttrium oxyorthosilicate (LYSO). For indirect imaging and diffraction with ultrafast cameras, commercial lanthanum bromide (LaBr3) and cerium bromide (CeBr3) are promising candidates. These materials exhibit decay times approximately a factor of two shorter than LYSO (around 40 ns) and lutetium oxyorthosilicate (LSO), while maintaining comparable light yield per incident X-ray photon. However, their implementation at APS-U requires addressing several challenges, including material limitations due to hygroscopicity, efficient optical coupling to imaging systems, and high quantum efficiency for conversion of scintillation light, predominantly at wavelengths below 400 nm, into detectable electronic signals. We report results from material characterization, detector integration and packaging, and beamline experiments of materials with impact. In addition, emerging scintillator classes, including perovskites and high-entropy materials, are discussed as potential alternatives for next-generation ultrafast X-ray diagnostics.

Wang, Zhehui [Los Alamos] (ORCID:0000000178264063)↗