Search NASA⌕ Search

SEARCH · Search NASA

Results for “quantum dot”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Morphology and strain of self-assembled semipolar GaN quantum dots in (1122) AlN

GaN quantum dots (QDs) grown in semipolar (1122) AlN by plasma-assisted molecular-beam epitaxy were studied by transmission electron microscopy (TEM) and scanning transmission electron microscopy techniques. The embedded (1122)-grown QDs exhibited pyramidal or truncated-pyramidal morphology consistent with the symmetry of the nucleating plane, and were delimited by nonpolar and semipolar nanofacets. It was also found that, in addition to the (1122) surface, QDs nucleated at depressions comprising (1011) facets. This was justified by ab initio density functional theory calculations showing that such GaN/AlN facets are of lower energy compared to (1122). Based on quantitative high-resolution TEM strain measurements, the three-dimensional QD strain state was analyzed using finite-element simulations. The internal electrostatic field was then estimated, showing small potential drop along the growth direction, and limited localization at most QD interfaces.

36 MATERIALS SCIENCE↗

Detection of the Third Transition of InAs/GaAsSb Quantum Dots

We have investigated InAs quantum dots (QDs) on GaAsSb barrier layers. Low temperature photoluminescence (PL) for InAs/GaAsSb with various {delta}-doping levels is performed to observe interband transitions. PL spectra of heavily doped QD samples show that the electrons injected from the {delta}-doping plane increase the intensity of the emission peak between the electron and hole first excited states, E1H1, not observed from undoped and lightly QD samples. Time resolved photoluminescence (TRPL) data as a function of {delta}-doping density reveal that the introduction of a {delta}-doping plane in the GaAsSb barrier decreases a carrier lifetime making recombination between ground states in QD area faster. As an evidence of carriers more injected from a {delta}-doping plane an Arrhenius fitting curve taken from temperature dependent PL indicates that the doped samples have the greater thermal activation energies than those of the lightly doped samples. Additionally, intersubband transitions of 20 multiple InAs QDs embedded in GaAsSb barriers are experimentally determined by low temperature (77K) Fourier Transformation-Infrared Spectroscopy (FT-IR) using a multiple internal reflection technique. It is noted that there is a broad peak around about 240meV corresponding to the energy separation between the electron ground state and the continuum state in the conduction band offset (CBO). The band structure based upon an eight band k.p method confirms the experimental results observed here. Furthermore, all related physical phenomena will be discussed as well.

14 SOLAR ENERGY↗

Guanidinium-Assisted Surface Matrix Engineering for Highly Efficient Perovskite Quantum Dot Photovoltaics

Metal halide perovskite quantum dots (Pe-QDs) are of great interest in new-generation photovoltaics (PVs). However, it remains challenging in the construction of conductive and intact Pe-QD films to maximize their functionality. Herein, a ligand-assisted surface matrix strategy to engineer the surface and packing states of Pe-QD solids is demonstrated by a mild thermal annealing treatment after ligand exchange processing (referred to as “LE-TA”) triggered by guanidinium thiocyanate. The “LE-TA” method induces the formation of surface matrix on CsPbI 3 QDs, which is dominated by the cationic guanidinium (GA+) rather than the SCN-, maintaining the intact cubic structure and facilitating interparticle electrical interaction of QD solids. Consequently, the GA-matrix-confined CsPbI 3 QDs exhibit remarkably enhanced charge mobility and carrier diffusion length compared to control ones, leading to a champion power conversion efficiency of 15.21% when assembled in PVs, which is one of the highest among all Pe-QD solar cells. Additionally, the “LE-TA” method shows similar effects when applied to other Pe-QD PV systems like CsPbBr 3 and FAPbI 3 (FA = formamidinium), indicating its versatility in regulating the surfaces of various Pe-QDs. This work may afford new guidelines to construct electrically conductive and structurally intact Pe-QD solids for efficient optoelectronic devices.

36 MATERIALS SCIENCE↗

Quantum-Dot Laser for Wavelengths of 1.8 to 2.3 micron

The figure depicts a proposed semiconductor laser, based on In(As)Sb quantum dots on a (001) InP substrate, that would operate in the wavelength range between 1.8 and 2.3 m. InSb and InAsSb are the smallest-bandgap conventional III-V semiconductor materials, and the present proposal is an attempt to exploit the small bandgaps by using InSb and InAsSb nanostructures as midinfrared emitters. The most closely related prior III-V semiconductor lasers are based, variously, on strained InGaAs quantum wells and InAs quantum dots on InP substrates. The emission wavelengths of these prior devices are limited to about 2.1 m because of critical quantum-well thickness limitations for these lattice mismatched material systems. The major obstacle to realizing the proposed laser is the difficulty of fabricating InSb quantum dots in sufficient density on an InP substrate. This difficulty arises partly because of the weakness of the bond between In and Sb and partly because of the high temperature needed to crack metalorganic precursor compounds during the vapor-phase epitaxy used to grow quantum dots: The mobility of the weakly bound In at the high growth temperature is so high that In adatoms migrate easily on the growth surface, resulting in the formation of large InSb islands at a density, usually less than 5 x 10(exp 9) cm(exp -2), that is too low for laser operation. The mobility of the In adatoms could be reduced by introducing As atoms to the growth surface because the In-As bond is about 30 percent stronger than is the In-Sb bond. The fabrication of the proposed laser would include a recently demonstrated process that involves the use of alternative supplies of precursors to separate group-III and group-V species to establish local non-equilibrium process conditions, so that In(As)Sb quantum dots assemble themselves on a (001) InP substrate at a density as high as 4 x 10(exp 10) cm(exp -2). Room-temperature photoluminescence spectra of quantum dots formed by this process indicate that they emit at wavelengths from 1.7 to 2.3 microns.

Qiu, Yueming↗

Effect of the length of ligands passivating quantum dots on the electrooptical characteristics of organic light-emitting diodes

The electrooptical characteristics of organic light-emitting diodes with quantum dots passivated with organic ligands of different lengths as emitting centers are investigated. It is established that the thickness of the ligand coating covering the quantum dots has little effect on the Förster energy transfer in the diodes, but significantly affects the direct injection of charge carriers into the quantum-dot layer. It is shown that the thickness of the passivation coating covering the quantum dots in a close-packed nanoparticle layer is deter- mined both by the length of passivating ligands and the degree of quantum-dot coverage with ligands.

36 MATERIALS SCIENCE↗

Room temperature biosynthesis of greatly stable fluorescent ZnO quantum dots for the selective detection of Cr{sup 3+} ions

Graphical abstract: Biosynthesized fluorescent ZnO quantum dots are extremely stable and are able to sense up to 2 nM of Cr3+ ions in aqueous solution. - Highlights: • ZnO quantum dotes (QDs) are rapidly synthesized from the bio waste at room temperature. • The capping and reducing agent is from natural source hence biodegradable. • The water soluble fluorescent ZnO quantum dots are highly stable. • The QDs are able to sense 2 nM of Cr{sup 3+} ions in aqueous solution. - Abstract: Synthesis of extremely stable and water soluble quantum dots (QDs) would be smart if the method is rapid and eco-friendly. Here in, we have employed a simple strategy for the preparation of well dispersed, luminescent ZnO quantum dots by using pomegranate peel extract at room temperature. This method excludes the use of strong commercial stabilizing agents, different pH conditions, higher temperature and inert atmosphere during the synthesis. The microscopic study has revealed the ZnO QDs to be of a narrow size with an average size distribution of about 4 nm. The water soluble QDs exhibited a strong emission peak at 490 nm and were stable for twelve months. The emission from ZnO QDs are selectively quenched upon addition of Cr{sup 3+} ions. The interaction between the Cr{sup 3+} and the biomolecules on the exterior of ZnO QDs, enables the system to detect up to 2 nM Cr{sup 3+} ions in aqueous solution.

36 MATERIALS SCIENCE↗

Reconfigurable quadruple quantum dots in a silicon nanowire transistor

We present a reconfigurable metal-oxide-semiconductor multi-gate transistor that can host a quadruple quantum dot in silicon. The device consists of an industrial quadruple-gate silicon nanowire field-effect transistor. Exploiting the corner effect, we study the versatility of the structure in the single quantum dot and the serial double quantum dot regimes and extract the relevant capacitance parameters. We address the fabrication variability of the quadruple-gate approach which, paired with improved silicon fabrication techniques, makes the corner state quantum dot approach a promising candidate for a scalable quantum information architecture.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

SiGe quantum wells with oscillating Ge concentrations for quantum dot qubits

Large-scale arrays of quantum-dot spin qubits in Si/SiGe quantum wells require large or tunable energy splittings of the valley states associated with degenerate conduction band minima. Existing proposals to deterministically enhance the valley splitting rely on sharp interfaces or modifications in the quantum well barriers that can be difficult to grow. Here, we propose and demonstrate a new heterostructure, the “Wiggle Well”, whose key feature is Ge concentration oscillations inside the quantum well. Experimentally, we show that placing Ge in the quantum well does not significantly impact our ability to form and manipulate single-electron quantum dots. We further observe large and widely tunable valley splittings, from 54 to 239 μ eV. Tight-binding calculations, and the tunability of the valley splitting, indicate that these results can mainly be attributed to random concentration fluctuations that are amplified by the presence of Ge alloy in the heterostructure, as opposed to a deterministic enhancement due to the concentration oscillations. Quantitative predictions for several other heterostructures point to the Wiggle Well as a robust method for reliably enhancing the valley splitting in future qubit devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Indirect and direct optical transitions in In{sub 0.5}Ga{sub 0.5}As/GaP quantum dots

We present a study of self-assembled In{sub 0.5}Ga{sub 0.5}As quantum dots on GaP(001) surfaces linking growth parameters with structural, optical, and electronic properties. Quantum dot densities from 5.0 × 10{sup 7} cm{sup −2} to 1.5 × 10{sup 11} cm{sup −2} are achieved. A ripening process during a growth interruption after In{sub 0.5}Ga{sub 0.5}As deposition is used to vary the quantum dot size. The main focus of this work lies on the nature of optical transitions which can be switched from low-efficient indirect to high-efficient direct ones through improved strain relief of the quantum dots by different cap layers.

36 MATERIALS SCIENCE↗

RKKY interaction in a chirally coupled double quantum dot system

The competition between the Kondo effect and the Ruderman-Kittel-Kasuya-Yoshida (RKKY) interaction is investigated in a double quantum dots system, coupled via a central open conducting region. A perpendicular magnetic field induces the formation of Landau Levels which in turn give rise to the so-called Kondo chessboard pattern in the transport through the quantum dots. The two quantum dots become therefore chirally coupled via the edge channels formed in the open conducting area. In regions where both quantum dots exhibit Kondo transport the presence of the RKKY exchange interaction is probed by an analysis of the temperature dependence. The thus obtained Kondo temperature of one dot shows an abrupt increase at the onset of Kondo transport in the other, independent of the magnetic field polarity, i.e. edge state chirality in the central region.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Observability of localized magnetoplasmons in quantum dots: Scrutinizing the eligibility of far-infrared, Raman, and electron-energy-loss spectroscopies

We investigate a one-component, quasi-zero dimensional, quantum plasma exposed to a parabolic potential and an applied magnetic field in the symmetric gauge. If the size of such a system as can be realized in the semiconducting quantum dots is on the order of the de-Broglie wavelength, the electronic and optical properties become highly tunable. Then the quantum size effects challenge the observation of many-particle phenomena such as the magneto-optical absorption, Raman intensity, and electron energy-loss spectrum. An exact analytical solution of the problem leads us to infer that these many-particle phenomena are, in fact, dictated by the generalized Kohn’s theorem (GKT) in the long-wavelength limit. Maneuvering the confinement and/or the magnetic field furnishes the resonance energies capable of being explored with the FIR, Raman, and/or electron-energy-loss spectroscopy. This implies that either of these probes is competent in observing the localized magnetoplasmons in the system. As an application of the rigorous analytical diagnosis of the system, we have presented various pertinent single-particle, such as Fock-Darwin spectrum, Fermi energy, zigzag excitation spectrum, and magneto-optical transitions, and the many-particle phenomena, such as magneto-optical absorption, Raman intensity, and electron energy-loss probability. In the latter, the energy position of the resonance peaks is observed to be independent of the electron-electron interactions and hence of the number of electrons in the quantum dot in compliance with the GKT. It is found that both confinement potential and magnetic field play a decisive role in influencing the aforementioned many-particle phenomena. Specifically, increasing (decreasing) the strength of the confining potential is found to be analogous to shrinking (expanding) the size of the quantum dots and results into a blue (red) shift in the respective spectra. Intensifying the magnetic field has two-fold effects in the resonance spectra associated with all three spectroscopies considered here: the lower resonance peak observes a red shift, whereas the higher one experiences a blue shift. This is a unique and intriguing behavior observed in the quantum dots with complete confinement. A deeper insight into the physics of the quantum dots is paving the way for their implementation in such diverse fields as quantum computing and medical imaging.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of defects on the photoluminescence kinetics in GaN/AlN quantum-dot structures

The influence of defects in the AlN barrier on photoluminescence decay after pulse excitation is studied for structures with GaN quantum dots in an AlN matrix. For these quantum-dot structures, it is found that the initial part of the decay curves corresponds to fast photoluminescence decay. Comparison of the photoluminescence-decay curves for the GaN/AlN quantum-dot structures and AlN layers without quantum dots shows that fast decay is defined by the contribution of the photoluminescence band related to defects in the AlN matrix.

36 MATERIALS SCIENCE↗

Effect of the nonlinear saturation of the gain on the peak modulation frequency in lasers based on self-assembled quantum dots

Peak modulation frequency of lasers based on self-organized quantum dots is calculated taking into account the effect of nonlinear gain saturation. Because of a large nonlinear gain coefficient and a reduction in the differential gain with increasing optical losses, the peak modulation frequency is attained for an optimum loss level that is significantly lower than the saturated optical gain in the active region. For lasers based on multiply stacked arrays of quantum dots, the peak modulation frequency first increases with increasing number of quantum-dot layers before leveling off, with the limiting value being inversely proportional to the nonlinear gain coefficient.

36 MATERIALS SCIENCE↗

Size-Dependent Optical Properties of Colloidal CdS Quantum Dots Passivated by Thioglycolic Acid

The results of studies of the optical properties of ensembles of colloidal CdS quantum dots passivated by thioglycolic acid are reported. The average dimensions of the quantum dots lie in the range from 1.7 to 5.8 nm. By X-ray diffraction studies and Raman spectroscopy, it is established that quantum dots crystallize with the formation of a cubic crystal lattice. The systematic features of the quantum-confinement effect in the optical absorption and luminescence spectra, as well as in the luminescence excitation spectra, are established. The features manifest themselves as a blue shift of the corresponding bands with decreasing quantum-dot dimensions. From analysis of the nanosecond luminescence kinetics, it is concluded that experimentally observed radiative recombination proceeds by the donor–acceptor mechanism.

36 MATERIALS SCIENCE↗

Excitonic optical properties of wurtzite ZnS quantum dots under pressure

By means of atomistic empirical pseudopotentials combined with a configuration interaction approach, we have studied the optical properties of wurtzite ZnS quantum dots in the presence of strong quantum confinement effects as a function of pressure. We find the pressure coefficients of quantum dots to be highly size-dependent and reduced by as much as 23% in comparison to the bulk value of 63 meV/GPa obtained from density functional theory calculations. The many-body excitonic effects on the quantum dot pressure coefficients are found to be marginal. The absolute gap deformation potential of quantum dots originates mainly from the energy change of the lowest unoccupied molecular orbital state. Finally, we find that the exciton spin-splitting increases nearly linearly as a function of applied pressure.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Determination of energy scales in few-electron double quantum dots

The capacitive couplings between gate-defined quantum dots and their gates vary considerably as a function of applied gate voltages. The conversion between gate voltages and the relevant energy scales is usually performed in a regime of rather symmetric dot-lead tunnel couplings strong enough to allow direct transport measurements. Unfortunately, this standard procedure fails for weak and possibly asymmetric tunnel couplings, often the case in realistic devices. We have developed methods to determine the gate voltage to energy conversion accurately in the different regimes of dot-lead tunnel couplings and demonstrate strong variations of the conversion factors. Our concepts can easily be extended to triple quantum dots or even larger arrays.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Localization of Carriers in Quantum Dots with Uniaxial Anisotropy of Shape and Composition

The electronic and hole states in quantum dots (QD) of cubic II–VI semiconductors with a spheroidal shape and uniaxial anisotropy have been studied theoretically. The smooth potential energy profiles simulated by the Gauss function in all three spatial directions are considered. The energy level lowering and the energy splitting of the hole state from the valence band top Γ{sub 8} by momentum 3/2 into the states with projections ±3/2, ±1/2 on the anisotropy axis are analyzed. The QD anisotropies of three types are considered: the QD size anisotropy, the QD potential barrier anisotropy, and the combined anisotropy. In the first case, flattened quantum dots, in which the characteristic size in the structure plane is larger than the size along the anisotropy axis, are considered. In the second case, QDs, in which the potential barrier height in the plane is lower than that along the anisotropy axis, are considered. In the third case, flattened quantum dots with the anisotropy of the size and the potential barrier are considered. The conditions of the charge carrier localization inside QD have been found, and the influence of the form and composition anisotropies on the energies of exciton transitions in the structures with Cd{sub x}Zn{sub 1 –} {sub x}Se quantum dots are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Submonolayer InGaAs/GaAs Quantum Dots Grown by MOCVD

The mode of the growth of InGaAs quantum dots by MOS-hydride epitaxy on GaAs substrates without a deviation and with a deviation of 2° is selected for laser structures emitting at wavelengths above 1.2 μm at room temperature. As a result, a quantum-dot density of 4 × 10{sup 10} cm{sup –2} is achieved. Stimulated emission is observed in laser structures with seven layers of quantum dots at a wavelength of 1.06 μm at liquid-nitrogen temperature. The threshold power density of optical pumping is about 5 kW/cm{sup 2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗