Search NASA⌕ Search

SEARCH · Search NASA

Results for “random fields”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Investigating Grain Structure and Microcracking in SiCf-SiCm Composites Using 4D-STEM

Silicon carbide (SiC) fiber-reinforced SiC matrix composites (SiCf-SiCm) are promising materials for accident-tolerant fuel (ATF) cladding in light water reactors. This paper, using four-dimensional scanning transmission electron microscopy (4D-STEM), studied the microstructure of SiCf-SiCm at nanoscale and provided grain statistics at the CVI/fiber region. Here, the results reveal that CVI region mainly contain irregular sub-micron grains (115 nm to 1800 nm) with a preferred orientation, while the fiber region has nano equiaxed grains (21 nm to 78 nm) with random orientations. Centered dark field imaging over the fiber regions verified the grain size measurement by 4D-STEM. Through 4D-STEM virtual dark field imaging and orientation mapping, intragranular propagation was identified as the fracture mechanism for a microcrack observed within the CVI region. The amorphous pyrolytic carbon layer was also shown to effectively arrest the microcrack.

4D-STEM↗

An optimized posterior axillary boost technique in radiation therapy to supraclavicular and axillary lymph nodes: A comparative study

To assess the advantages of an optimized posterior axillary (AX) boost technique for the irradiation of supraclavicular (SC) and AX lymph nodes. Five techniques for the treatment of SC and levels I, II, and III AX lymph nodes were evaluated for 10 patients selected at random: a direct anterior field (AP); an anterior to posterior parallel pair (AP-PA); an anterior field with a posterior axillary boost (PAB); an anterior field with an anterior axillary boost (AAB); and an optimized PAB technique (OptPAB). The target coverage, hot spots, irradiated volume, and dose to organs at risk were evaluated and a statistical analysis comparison was performed. The AP technique delivered insufficient dose to the deeper AX nodes. The AP-PA technique produced larger irradiated volumes and higher mean lung doses than the other techniques. The PAB and AAB techniques originated excessive hot spots in most of the cases. The OptPAB technique produced moderate hot spots while maintaining a similar planning target volume (PTV) coverage, irradiated volume, and dose to organs at risk. This optimized technique combines the advantages of the PAB and AP-PA techniques, with moderate hot spots, sufficient target coverage, and adequate sparing of normal tissues. The presented technique is simple, fast, and easy to implement in routine clinical practice and is superior to the techniques historically used for the treatment of SC and AX lymph nodes.

61 RADIATION PROTECTION AND DOSIMETRY↗

A holey cavity for single-transducer 3D ultrasound imaging with physical optimization

Within the compressive sensing (CS) framework, one effective way to increase the likelihood of successful signal reconstruction is to employ random processes in the construction of the sensing matrix. This work presents a 3D holey cavity, with diverse frequency modes, to spectrally code, that is, randomize, the ultrasound wave fields. The simulated results show that the use of such a cavity enables imaging simple or complex targets, such as spheres or the letter E, by only a single transceiver—something that is not possible without the use of a coding structure like the cavity. The effect of noise on imaging results and the size of the targets on the first-order Born approximation (BA) are also investigated. Moreover, this study attempts to optimize the cavity, based on a single numerical metric, such as the sum of singular values (SSV) or mutual coherence (MC). Yet, it will be shown that neither of these metrics can consistently compare the norm-one imaging performance between two cavities of different materials or hole sizes. This leaves finding a quantitative metric for these kinds of optimizations an open problem.

42 ENGINEERING↗

Thermodynamic Model of Solvent Effects in Semiflexible Diblock and Random Copolymer Assembly

Here, we present a field-theoretic model to predict the equilibrium thermodynamic behavior of semiflexible diblock copolymers and random copolymers in the presence of solvent. We find that in both systems polymer–solvent contacts dramatically influence the thermodynamic behavior with decreasing the copolymer segment length (i.e., molecular weight). When a copolymer has unequal monomer composition, both polymer length and solvent concentration have a strong influence on the phase transition spinodal and magnitude of the critical wave modes. Diblock copolymers exhibit an expanded region of the lamellar phase in the phase diagram with decreasing chain length and polymer concentration. Such effects suggest a breakdown of the dilute approximation for solutions of short diblock copolymers. Random copolymer solutions also exhibit changes in the phase-transition spinodal and critical wave mode at asymmetric chemical compositions. This effect is highly relevant to most random copolymer materials, since a monomer is typically a low-molecular-weight chemical unit.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling of multiphase flow and heat transfer in radiant syngas cooler of an entrained-flow coal gasification

A comprehensive model has been developed to analyze the multiphase flow and heat transfer in the radiant syngas cooler (RSC) of an industrial-scale entrained-flow coal gasification. The three-dimensional multiphase flow field and temperature field were reconstructed. The realizable {kappa}-{epsilon} turbulence model is applied to calculate the gas flow field, while the discrete random walk model is applied to trace the particles, and the interaction between the gas and the particle is considered using a two-way coupling model. The radiative properties of syngas mixture are calculated by weighted-sum-of-gray-gases model (WSGGM). The Ranz-Marshall correlation for the Nusselt number is used to account for convection heat transfer between the gas phase and the particles. The discrete ordinate model is applied to model the radiative heat transfer, and the effect of ash/slag particles on radiative heat transfer is considered. The model was successfully validated by comparison with the industrial plant measurement data, which demonstrated the ability of the model to optimize the design. The results show that a torch shape inlet jet was formed in the RSC, and its length increased with the diameter of the central channel. The recirculation zones appeared around the inlet jet, top, and bottom of the RSC. The overall temperature decreased with the heat-transfer surface area of the fins. The concentration distribution, velocity distribution, residence time distribution, and temperature distribution of particles with different diameters have been discussed. Finally, the slag/ash particles size distribution and temperature profile at the bottom of the RSC have been presented.

01 COAL, LIGNITE, AND PEAT↗

On the widespread use of the Corrsin hypothesis in diffusion theories

In the past four decades, several nonlinear theories have been developed to describe (i) the motion of charged test particles through a turbulent magnetized plasma and (ii) the random walk of magnetic field lines. In many such theories, the so-called Corrsin independence hypothesis has been applied to enforce analytical tractability. In this note, it is shown that the Corrsin hypothesis is part of most nonlinear diffusion theories. In some cases, the Corrsin approximation is somewhat hidden, while in other cases a different name is used for the same approach. It is shown that even the researchers who criticized the application of this hypothesis have used it in their nonlinear diffusion theories. It is hoped that the present article will eliminate the recently caused confusion about the applicability and validity of the Corrsin hypothesis.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electrical spin injection in 2D semiconductors and topological insulators

We have developed a theory of spin orientation by electric current in 2D semiconductors. It is shown that the spin depends on the relation between the energy and spin relaxation times and can vary by a factor of two for the limiting cases of fast and slow energy relaxation. For symmetrically-doped (110)-grown semiconductor quantum wells the effect of current-induced spin orientation is shown to exist due to random spatial variation of the Rashba spin-orbit splitting. We demonstrate that the spin depends strongly on the correlation length of this random spin-orbit field. We calculate the spin orientation degree in two-dimensional topological insulators. In high electric fields when the “streaming” regime is realized, the spin orientation degree weakly depends on the electric field and can reach values about 5%.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Note: The design of thin gap chamber simulation signal source based on field programmable gate array

The Thin Gap Chamber (TGC) is an important part of ATLAS detector and LHC accelerator. Targeting the feature of the output signal of TGC detector, we have designed a simulation signal source. The core of the design is based on field programmable gate array, randomly outputting 256-channel simulation signals. The signal is generated by true random number generator. The source of randomness originates from the timing jitter in ring oscillators. The experimental results show that the random number is uniform in histogram, and the whole system has high reliability.

97 MATHEMATICS AND COMPUTING↗

GLOBAL GALACTIC DYNAMO DRIVEN BY COSMIC RAYS AND EXPLODING MAGNETIZED STARS

We report the first results of the first global galactic-scale cosmic ray (CR)-MHD simulations of CR-driven dynamo. We investigate the dynamics of magnetized interstellar medium (ISM), which is dynamically coupled with CR gas. We assume that exploding stars deposit small-scale, randomly oriented, dipolar magnetic fields into the differentially rotating ISM, together with a portion of CRs, accelerated in supernova shocks. We conduct numerical simulations with the aid of a new parallel MHD code PIERNIK. We find that the initial magnetization of galactic disks by exploding magnetized stars forms favorable conditions for the CR-driven dynamo. We demonstrate that dipolar magnetic fields supplied on small supernova remnant scales can be amplified exponentially by the CR-driven dynamo, to the present equipartition values, and transformed simultaneously to large galactic scales. The resulting magnetic field structure in an evolved galaxy appears spiral in the face-on view and reveals the so-called X-shaped structure in the edge-on view.

79 ASTRONOMY AND ASTROPHYSICS↗

RADIATIVE HEATING OF THE SOLAR CORONA

We investigate the effect of solar visible and infrared radiation on electrons in the Sun's atmosphere using a Monte Carlo simulation of the wave-particle interaction and conclude that sunlight provides at least 40% and possibly all of the power required to heat the corona, with the exception of dense magnetic flux loops. The simulation uses a radiation waveform comprising 100 frequency components spanning the solar blackbody spectrum. Coronal electrons are heated in a stochastic manner by low coherence solar electromagnetic radiation. The wave 'coherence time' and 'coherence volume' for each component is determined from optical theory. The low coherence of solar radiation allows moving electrons to gain energy from the chaotic wave field which imparts multiple random velocity 'kicks' to these particles causing their velocity distribution to broaden or heat. Monte Carlo simulations of broadband solar radiative heating on ensembles of 1000 electrons show heating at per particle levels of 4.0 x 10{sup -21} to 4.0 x 10{sup -20} W, as compared with non-loop radiative loss rates of {approx}1 x 10{sup -20} W per electron. Since radiative losses comprise nearly all of the power losses in the corona, sunlight alone can explain the elevated temperatures in this region. The volume electron heating rate is proportional to density, and protons are assumed to be heated either by plasma waves or through collisions with electrons.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

MAGNETIC ENERGY PRODUCTION BY TURBULENCE IN BINARY NEUTRON STAR MERGERS

The simultaneous detection of electromagnetic and gravitational wave emission from merging neutron star binaries would greatly aid in their discovery and interpretation. By studying turbulent amplification of magnetic fields in local high-resolution simulations of neutron star merger conditions, we demonstrate that magnetar-level ({approx}> 10{sup 16} G) fields are present throughout the merger duration. We find that the small-scale turbulent dynamo converts 60% of the randomized kinetic energy into magnetic fields on a merger timescale. Since turbulent magnetic energy dissipates through reconnection events that accelerate relativistic electrons, turbulence may facilitate the conversion of orbital kinetic energy into radiation. If 10{sup -4} of the {approx}10{sup 53} erg of orbital kinetic available gets processed through reconnection and creates radiation in the 15-150 keV band, then the fluence at 200 Mpc would be 10{sup -7} erg cm{sup -2}, potentially rendering most merging neutron stars in the advanced LIGO and Virgo detection volumes detectable by Swift BAT.

79 ASTRONOMY AND ASTROPHYSICS↗

Sample variance in weak lensing: How many simulations are required?

Constraining cosmology using weak gravitational lensing consists of comparing a measured feature vector of dimension N b with its simulated counterpart. An accurate estimate of the N b × N b feature covariance matrix C is essential to obtain accurate parameter confidence intervals. When C is measured from a set of simulations, an important question is how large this set should be. To answer this question, we construct different ensembles of N r realizations of the shear field, using a common randomization procedure that recycles the outputs from a smaller number N s ≤ N r of independent ray-tracing N-body simulations. We study parameter confidence intervals as a function of (N s , N r ) in the range 1 ≤ N s ≤ 200 and 1 ≤ N r ≲ 105. Previous work [S. Dodelson and M. D. Schneider, Phys. Rev. D 88, 063537 (2013)] has shown that Gaussian noise in the feature vectors (from which the covariance is estimated) lead, at quadratic order, to an O(1/N r ) degradation of the parameter confidence intervals. Using a variety of lensing features measured in our simulations, including shear-shear power spectra and peak counts, we show that cubic and quartic covariance fluctuations lead to additional O(1/N 2 r ) error degradation that is not negligible when N r is only a factor of few larger than N b . We study the large N r limit, and find that a single, 240 Mpc/h sized 512 3 -particle N-body simulation (N s = 1) can be repeatedly recycled to produce as many as N r = few × 10 4 shear maps whose power spectra and high-significance peak counts can be treated as statistically independent. Lastly, a small number of simulations (N s = 1 or 2) is sufficient to forecast parameter confidence intervals at percent accuracy.

79 ASTRONOMY AND ASTROPHYSICS↗

Tolerance Studies of the Mu2e Solenoid System

The muon-to-electron conversion experiment at Fermilab is designed to explore charged lepton flavor violation. It is composed of three large superconducting solenoids, namely, the production solenoid, the transport solenoid, and the detector solenoid. Each subsystem has a set of field requirements. Tolerance sensitivity studies of the magnet system were performed with the objective of demonstrating that the present magnet design meets all the field requirements. Systematic and random errors were considered on the position and alignment of the coils. The study helps to identify the critical sources of errors and which are translated to coil manufacturing and mechanical support tolerances.

43 PARTICLE ACCELERATORS↗

Crystal-field analysis and Zeeman splittings of energy levels of Nd{sup 3+} (4f{sup 3}) in GaN

The crystal-field splitting and Zeeman splitting of energy levels of Nd{sup 3+} (4f{sup 3}) doped into semi-conducting GaN (3.2 eV) grown in the hexagonal (huntite) phase by plasma-assisted molecular beam epitaxy have been modeled using a parameterized Hamiltonian defined to operate within the complete 4f{sup 3} electronic configuration of Nd{sup 3+} substituted for Ga{sup 3+} in the lattice. Zeeman splittings were obtained by applying magnetic fields up to 6.6 T with the fields parallel and perpendicular to the crystallographic c-axis. The experimental energy (Stark) levels were obtained from a recent spectroscopic study on the same samples, where the combined excitation emission spectroscopy (CEES) identified the majority of Nd{sup 3+} ions as replacing Ga{sup 3+} in sites of C{sub 3v} symmetry. The manifolds of Nd{sup 3+} (4f{sup 3}){sup 2S+1}L{sub J} modeled for the crystal-field splitting include the ground state, {sup 4}I{sub 9/2}, and excited states {sup 4}I{sub 11/2}, {sup 4}I{sub 13/2}, {sup 4}F{sub 3/2}, {sup 4}F{sub 5/2}, {sup 2}H{sub 9/2}, {sup 4}F{sub 7/2}, {sup 4}S{sub 3/2}, {sup 4}G{sub 5/2}, and {sup 4}G{sub 7/2}. The energies of 41 experimental Stark levels from these manifolds were modeled through the use of a Monte Carlo method in which independent crystal-field parameters (CFP) were given random starting values and optimized using standard least-squares fitting between calculated and experimental Stark levels. Irreducible representations (irreps) and crystal field quantum numbers ({mu}) were assigned to the energy level states of the {sup 4}I{sub 9/2} and {sup 4}F{sub 3/2} multiplet manifolds based on an analysis of the Zeeman data. This allows determination of which of the competing local minima should be considered to be the physically significant minimum. Using standard least-squares fitting between calculated and experimental Stark levels for Nd{sup 3+} in C{sub 3v} symmetry, we obtain a final standard deviation of 7.01 cm{sup -1} (rms = 5.48 cm{sup -1}).

36 MATERIALS SCIENCE↗

Turbulent, extreme multi-zone model for simulating flux and polarization variability in blazars

The author presents a model for variability of the flux and polarization of blazars in which turbulent plasma flowing at a relativistic speed down a jet crosses a standing conical shock. The shock compresses the plasma and accelerates electrons to energies up to γ{sub max} ≳ 10{sup 4} times their rest-mass energy, with the value of γ{sub max} determined by the direction of the magnetic field relative to the shock front. The turbulence is approximated in a computer code as many cells, each with a uniform magnetic field whose direction is selected randomly. The density of high-energy electrons in the plasma changes randomly with time in a manner consistent with the power spectral density of flux variations derived from observations of blazars. The variations in flux and polarization are therefore caused by continuous noise processes rather than by singular events such as explosive injection of energy at the base of the jet. Sample simulations illustrate the behavior of flux and linear polarization versus time that such a model produces. The variations in γ-ray flux generated by the code are often, but not always, correlated with those at lower frequencies, and many of the flares are sharply peaked. The mean degree of polarization of synchrotron radiation is higher and its timescale of variability shorter toward higher frequencies, while the polarization electric vector sometimes randomly executes apparent rotations. The slope of the spectral energy distribution exhibits sharper breaks than can arise solely from energy losses. All of these results correspond to properties observed in blazars.

79 ASTRONOMY AND ASTROPHYSICS↗

Magnetic fields and massive star formation

Massive stars (M > 8 M {sub ☉}) typically form in parsec-scale molecular clumps that collapse and fragment, leading to the birth of a cluster of stellar objects. We investigate the role of magnetic fields in this process through dust polarization at 870 μm obtained with the Submillimeter Array (SMA). The SMA observations reveal polarization at scales of ≲0.1 pc. The polarization pattern in these objects ranges from ordered hour-glass configurations to more chaotic distributions. By comparing the SMA data with the single dish data at parsec scales, we found that magnetic fields at dense core scales are either aligned within 40° of or perpendicular to the parsec-scale magnetic fields. This finding indicates that magnetic fields play an important role during the collapse and fragmentation of massive molecular clumps and the formation of dense cores. We further compare magnetic fields in dense cores with the major axis of molecular outflows. Despite a limited number of outflows, we found that the outflow axis appears to be randomly oriented with respect to the magnetic field in the core. This result suggests that at the scale of accretion disks (≲ 10{sup 3} AU), angular momentum and dynamic interactions possibly due to close binary or multiple systems dominate over magnetic fields. With this unprecedentedly large sample of massive clumps, we argue on a statistical basis that magnetic fields play an important role during the formation of dense cores at spatial scales of 0.01-0.1 pc in the context of massive star and cluster star formation.

79 ASTRONOMY AND ASTROPHYSICS↗