Search NASA⌕ Search

SEARCH · Search NASA

Results for “scan pattern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Indoor Ground Testing of a Small UAS Sense and Avoid Airborne Doppler Radar

The National Aeronautics and Space Administration’s Unmanned Aircraft System (UAS) Traffic Management (UTM) project is researching prototype technologies needed to ensure safe integration of UAS operations into the National Airspace System (NAS). Within the UTM Concept of Operations, UAS would be equipped with on-board Sense and Avoid (SAA) technology to continually monitor for manned and unmanned aircraft in its vicinity while operating beyond visual line of sight in uncontrolled airspace. To support this effort, a candidate commercially available 24.5 GHz Doppler radar was selected and evaluated to determine if the technology could reliably support minimum requirements for SAA applications of small UAS (sUAS). Indoor ground tests were conducted inside the NASA Langley Research Center’s Experimental Test Range (ETR) from a stationary platform to evaluate the Doppler radar performance characteristics and gain operational proficiency before the radar was authorized to transmit outdoors. A high speed linear rail system was developed for the radar evaluation and was shown to be an effective method to generate Doppler radar targets of known radar cross section. The accuracy of the range and velocity reported by the radar was shown to be dependent on the Kalman filter state variance parameter settings. Antenna measurements were collected with the radar installed both on and off a sUAS to quantify the relative antenna gain, beam width and side lobe levels of the radar’s Metamaterial Electronically Scanning Array (MESA) antennas at boresight and extreme field of view pointing vectors. The relative antenna gain measured 2.6 dB lower at extreme field view angles compared to the boresight radiation pattern.

Szatkowski, George N.↗
DOE OSTI2020

GPR Robotic Assisted Non-Destructive Evaluation of Concrete Structures - 20196

Reinforced concrete structures are always under exposure of internal or external deteriorations due to many factors such as environmental, nuclear radiation or even construction deficiencies. The use of nondestructive test is one of the reliable methods to inspect structural members. In this case, GPR has a good capability to detect inside deteriorations of concrete structures. However, in many cases it is hard to inspect structural members by hand due to safety issues or inaccessibility. Thus, an alternative way to reduce such risks is to employ robot to carry nondestructive equipment. In this research, twelve reinforced concrete RC beams (8 x 16 x 96, width, height and length) are cast in the lab. Three RC beams have no defect and nine others various defects such as corrosion, de-bonded bars, void, delamination and honeycombing. The one-point load is applied at the center of the RC beam. The loading level is carried out at three levels: 50%, 75% and 100% of maximum load and total load-displacement diagram are performed. The load is held at each level and the robotic GPR is used to scan the side of RC beams. Then, RADAN software is employed to find out any defects at different loading conditions and visualize the crack propagation. The RADAN results show that the pattern of crack propagation for corrosion and debonding are same. Also, the load-displacement results present that inside defect cause reduction of load-capacity of RC beam. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS2005

[Development of X-ray Reflection Grating Technology for the Constellation-X Mission]

This Grant supports MIT technology development of x-ray reflection gratings for the Constellation-X Reflection Grating Spectrometer (RGS). Since the start of the Grant MIT has extended its previously-developed patterning and super-smooth, blazed grating fabrication technology to ten-times smaller grating periods and ten-times larger blaze angles to demonstrate feasibility and performance in the off-plane grating geometry. In the past year we have focused our efforts on extending our Nanoruler grating fabrication tool to enable it to perform variable-period scanning-beam interference lithography (VP-SBIL). This new capability required extensive optical and mechanical improvements to the system. The design phase of this work is largely completed and key components are now on order and assembly has begun. Over the next several months the new VP-SBIL Nanoruler system will be completed and testing begun. We have also demonstrated a new technique for patterning gratings using the Nanoruler called Doppler mode, which will be important for patterning the radial groove gratings for the RGS using the new VP-SBIL system. Flat and thin grating substrates will be critical for the RGS. In the last year we demonstrated a new technique for flattening thin substrates using magneto-rheologic fluid polishing (MRF) and achieved 2 arcsecond flatness with a 0.5 mm-thick substrate-a world's record. This meets the Con X requirement for grating substrate flatness.

Schattenburg, Mark L.↗
DOE OSTI2024

Constrained patterning of orientated metal chalcogenide nanowires and their growth mechanism

One-dimensional metallic transition-metal chalcogenide nanowires (TMC-NWs) hold promise for interconnecting devices built on two-dimensional (2D) transition-metal dichalcogenides, but only isotropic growth has so far been demonstrated. Here we show the direct patterning of highly oriented Mo 6 Te 6 NWs in 2D molybdenum ditelluride (MoTe 2 ) using graphite as confined encapsulation layers under external stimuli. The atomic structural transition is studied through in-situ electrical biasing the fabricated heterostructure in a scanning transmission electron microscope. Atomic resolution high-angle annular dark-field STEM images reveal that the conversion of Mo 6 Te 6 NWs from MoTe 2 occurs only along specific directions. Combined with first-principles calculations, we attribute the oriented growth to the local Joule-heating induced by electrical bias near the interface of the graphite-MoTe 2 heterostructure and the confinement effect generated by graphite. Using the same strategy, we fabricate oriented NWs confined in graphite as lateral contact electrodes in the 2H-MoTe 2 FET, achieving a low Schottky barrier of 11.5 meV, and low contact resistance of 43.7 Ω µm at the metal-NW interface. Our work introduces possible approaches to fabricate oriented NWs for interconnections in flexible 2D nanoelectronics through direct metal phase patterning.

36 MATERIALS SCIENCE↗
DOE OSTI2024

4D-STEM Mapping of Nanocrystal Reaction Dynamics and Heterogeneity in a Graphene Liquid Cell

Chemical reaction kinetics at the nanoscale are intertwined with heterogeneity in structure and composition. However, mapping such heterogeneity in a liquid environment is extremely challenging. Here, in this work, we integrate graphene liquid cell (GLC) transmission electron microscopy and four-dimensional scanning transmission electron microscopy to image the etching dynamics of gold nanorods in the reaction media. Critical to our experiment is the small liquid thickness in a GLC that allows the collection of high-quality electron diffraction patterns at low dose conditions. Machine learning-based data-mining of the diffraction patterns maps the three-dimensional nanocrystal orientation, groups spatial domains of various species in the GLC, and identifies newly generated nanocrystallites during reaction, offering a comprehensive understanding on the reaction mechanism inside a nanoenvironment. This work opens opportunities in probing the interplay of structural properties such as phase and strain with solution-phase reaction dynamics, which is important for applications in catalysis, energy storage, and self-assembly.

four-dimensional scanning transmission electron mi↗
DOE OSTI2019

Enhancing Network Visibility and Security through Tensor Analysis

The increasing size, variety, rate of growth and change, and complexity of network data has warranted advanced network analysis and services. Tools that provide automated analysis through traditional or advanced signature-based systems or machine learning classifiers suffer from practical difficulties. These tools fail to provide comprehensive and contextual insights into the network when put to practical use in operational cyber security. In this paper, we present an effective tool for network security and traffic analysis that uses high-performance data analytics based on a class of unsupervised learning algorithms called tensor decompositions. The tool aims to provide a scalable analysis of the network traffic data and also reduce the cognitive load of network analysts and be network-expert-friendly by presenting clear and actionable insights into the network. With this being said, In this paper, we demonstrate the successful use of the tool in two completely diverse operational cyber security environments, namely, (1) security operations center (SOC) for the SCinet network at the SuperComputing (SC) Conference in 2016 and 2017 and (2) Reservoir Labs’ Local Area Network (LAN). In each of these environments, we produce actionable results for cyber security specialists including (but not limited to) (1) finding malicious network traffic involving internal and external attackers using port scans, SSH brute forcing, and NTP amplification attacks, (2) uncovering obfuscated network threats such as data exfiltration using DNS port and using ICMP traffic, and (3) finding network misconfiguration and performance degradation patterns.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Iodosodalite synthesis with hot isostatic pressing of precursors produced from aqueous and hydrothermal processes

Iodosodalite powders were synthesized using aqueous and hydrothermal methods, with or without sodium borosilicate glass binders, and then hot isostatically pressed (HIP) at 900 ? and 175 MPa for 3 h to convert into waste forms. After HIPing, the structures, compositions, morphologies, porosities, and leach rates of the aqueous and hydrothermally produced iodosodalite samples were compared. X-ray diffraction patterns of HIPed samples showed that iodosodalite remained as the dominant phase. However, the fraction of the iodosodalite phase decreased after HIPing, indicating decomposition of the iodosodalite structure during the HIP process. Scanning electron microscopy and chemical imaging on the cross sections of HIPed samples showed homogeneous elemental distribution for aqueous-grown iodosodalite, whereas hydrothermally grown iodosodalite samples had more heterogeneity and porosity. The densities of HIPed samples with more glass binder were generally higher than sampled HIPed without binder. The leach tests on samples containing 20 mass% glass binder showed that the iodine dissolution rate of HIPed hydrothermally grown iodosodalite was about 4 times higher than iodosodalite by aqueous method. This study provides alternative techniques for immobilizing iodine-streams in iodosodalite waste forms.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

Anisotropic topological surface states in thin-film monoclinic Ag 2 Se

Silver chalcogenide systems have recently attracted significant attention due to their promising topological insulating properties. Here we conducted systematic low-temperature local scanning tunneling microscopy/spectroscopy and first-principles studies on the surface states of monoclinic Ag 2 Se thin films grown using molecular beam epitaxy. Through the use of quasi-particle interference patterns, we have observed evidence for topological surface states on the selenium-terminated surfaces with different types of defect densities. The results of ab initio calculations confirm the existence of nontrivial topological surface states in the monoclinic Ag 2 Se structure, for which such properties have not been previously reported. The energy dispersion determined using voltage-dependent standing wave patterns suggests that these topological states have an anisotropic Dirac cone structure. In conclusion, this discovery may lead to new applications for monoclinic Ag 2 Se in the rapidly growing fields of nanoelectronics and spintronics.

36 MATERIALS SCIENCE↗
NASA NTRS1982

Use of remote sensing for land use policy formulation

Research projects described include: (1) identifying coniferous forest types in Michigan using LANDSAT imagery; (2) investigating synoptic temperature patterns in Michigan as determined via GOES and HCMM thermal imagery; (3) land surface change detection using satellite data and a geographic data base; (4) determining soil map unit composition by electronic scanning densitometry; and (5) delimiting areas of virus infection in vineyards and blueberry fields in southwestern and western Michigan. Contractual activities involve important farmlands inventory, changes in aquatic vegetation in Saginaw Bay, digitized soil association map of Michigan, and aerial photography for hybrid-poplar research. On-going projects are also being conducted in Jamaica, Honduras, the Dominican Republic and Kenya.

Source record↗
NASA NTRS1988

Monocular electro-optical stereo scanner

MEOSS is a single optics and single spectral band camera. Three CCD's working in pushbroom mode are mounted perpendicular to the flight direction on a common focal plate. Their oblique views of + and - 23 degrees forward and backward, as well as nadir oriented, lead to threefold stereoscopic images. This principle allows a nearly simultaneous generation of all three images of a stereo triplet. The time gap between the forward and aft looking images guarantees constant illumination conditions. The ground resolution of MEOSS will be 52 by 80 m ground pixel size, height resolution of 55 m and swath width of 255 km. The drifting ground coverage pattern of MEOSS is unique compared to polar orbiting satellites and will allow images of an area to be taken at different times of the day. A scene will consist of 3144 scan lines, with each having 3236 pixels. The data will be received by the Deep Space Network of JPL Goldstone and mailed to Goddard.

Vermillion, C.↗
DOE OSTI2025

Electron Microscopy Transfer System to Protect Atmosphere‐Sensitive Materials for Scanning Electron Microscopy Characterization

Atmosphere- and/or moisture-sensitive materials can be challenging to characterize using electron microscopy techniques due to sample preparation workflows that generally require exposure to ambient conditions. Here, we describe a novel preparation method that uses aluminum foil in combination with a commercial cryo-EM transfer system to circumvent undesired exposure to the atmosphere. First, hygroscopic MgCl 2 was used as a model material, and prepared samples (both protected and unprotected) were placed in a controlled-humidity environment (> 80% relative humidity) for various exposure lengths (circa seconds to hours). Following this, the effectiveness of the sample preparation method was determined by comparing qualitative photos and quantitative X-ray diffraction patterns between the two sample subsets. The combined results of these experiments suggest that the outlined preparation method effectively protects MgCl 2 from atmospheric contamination compared to MgCl 2 samples that had no protective measures taken. Finally, the preparation method was utilized to protect a highly hygroscopic crystalline BaO thin film for characterization via scanning electron microscopy, thereby demonstrating a functional application of the outlined preparation technique and an additional use for the commercial cryo-EM transfer system beyond its intended application.

atmosphere-sensitive materials↗
DOE OSTI2021

Stable perovskite-fluorite dual-phase composites synthesized by one-pot solid-state reactive sintering for protonic ceramic fuel cells

We report that this work synthesized a series of oxide composites with nominal compositions of BaCe 05 Zr 0.4 Y 0.1 O 3-δ (BCZY)-Ce 0.5 Y 0.5 O 2-δ (YDC) based on the BCZY/YDC molar ratios of 0.5:1, 1:1, 2:1, and 4:1 (BCZY-YDC-0.5–1, BCZY-YDC-1-1, BCZY-YDC-2-1, and BCZY-YDC-4-1) using a one-pot solid state reactive sintering (SSRS) method. The X-ray diffraction (XRD) patterns and refinement proved that the one-pot SSRS at 1450 °C for 12 h could achieve the perovskite-fluorite dual-phase composites (DPCs) with the desired structure compositions. The scanning electron microscopy (SEM) images showed that the two DPCs of BCZY-YDC-1-1 and BCZY-YDC-2-1 formed excellent percolation for perovskite and fluorite phases. The conductivity measurement by electrochemical impedance spectroscopy (EIS) and the transference number measurement by the electromotive force (EMF) test proved that changing the BCZY/YDC molar ratio and operating condition could adjust the DPC's conduction property to make them suitable for electrolytes and electrode scaffolds for protonic ceramic fuel cells (PCFCs). The long-term conductivity testing and the crystal structure analysis after EMF testing under versatile conditions indicated that the DPCs of BCZY-YDC-2-1 and BCZY-YDC-1-1 were durable PCFC component materials. The PCFC button cells with the as-discovered BCZY-YDC-2-1 and BCZY-YDC-1-1 as an electrolyte and an anode scaffold, respectively, and the reported Ba–Ce–Fe–Co–O perovskite-perovskite composite as a cathode showed promising performance under H 2 /air gradient.

08 HYDROGEN↗
DOE OSTI2023

Hybrid manufacturing by additive friction stir deposition, metrology, CNC machining, and microstructure analysis

Aerospace flight panels must provide high strength with low mass. For aluminum panels, it is common practice to begin with a wrought plate and remove the majority of the material to attain the desired structure, comprising a thinner plate with the desired pattern of reinforcement ribs. As an alternative, this study implements hybrid manufacturing, where aluminum is first deposited on a baseplate only at the rib locations using additive friction stir deposition (AFSD). Structured light scanning is then used to measure the printed geometry. This geometry is finally used as the stock model for computer numerical control (CNC) machining. This paper details the hybrid manufacturing process that consists of: AFSD to print the preform, structured light scanning to generate the stock model and tool path, three-axis CNC machining, and post-process measurements for part geometry and microstructure.

42 ENGINEERING↗
NASA NTRS1979

The benefits of using short-interval satellite images to derive winds for tropical cyclones

During the 1975, 1976 and 1977 North Atlantic hurricane seasons, NOAA/NESS and NASA/GSFC conducted a cooperative program to determine the best resolution and frequency now available from satellite images for deriving winds to study and forecast tropical cyclones. High spatial and temporal resolution satellite imagery made it feasible to provide a large number of lower and upper tropospheric winds which can be obtained by tracking clouds within 650 km of tropical cyclone centers. Up to 10 (5) times as many low-level winds were derived from images spaced at 3 or 7.5 min intervals as from those at 30 min (15 min) intervals. Rapid-scan full-resolution IR and visible images minimized the 'erroneous' winds derived by tracking cloud elements that propagate by growing on one side and dissipating on the other and by tracking repetitive patterns that provided ambiguous indications of direction of movement.

Rodgers, E.↗
NASA NTRS1980

Planned observations of the diffuse sky radiation during shuttle mission STS-4

The planned space shuttle mission STS-4 will use the Skylab flight spare ten-color (near UV to near IR) photopolarimeter with boresighted 16 mm camera. This 164-hour mission will observe the zodiacal light to within approximately 20 deg of the sun (in and out of the ecliptic). The mission consists of several distinct phases: (1) tail-to-sun (TTS), belly to earth for 18 hours; (2) nose-to-sun, solar inertial for 79 hours; (3) bay-to-sun for 26 hours; and (4) passive thermal control for 37 hours. During the TTS phase, where most observations are scheduled, the instrument will scan back and forth in elevation at 4 deg/sec while the orbiter moves across the sky at its 4 deg/min orbital rate. The combined orbiter/instrument motion will result in a saw-tooth pattern of observations projected on the sky (between the 14 deg and 120 deg elevation limits) and will enable extensive measurements of the brightness, polarization and color of the background starlight to be made.

Weinberg, J. L.↗
NASA NTRS1982

Initial analysis of OSTA-1 ocean color experiment imagery

NASA's Ocean Color Experiment (OCE) was designed to map ocean features with an eight-channel scanning radiometer installed on the second flight of the Space Shuttle Columbia. Digital computer enhancement and band-ratio techniques were applied to radiometrically corrected spectral data in order to emphasize chlorophyll distribution patterns. Such a pattern was evident in the Yellow Sea between Korea and China, and the effects of discharge from the Yangtze and other rivers were also observed. Two scenes, from orbits 30 and 32, revealed the movement of plankton patches in the Gulf of Cadiz. Geometric correction of the images permitted ocean current velocities to be deduced, and water depth variability over the Grand Bahama Bank was estimated by means of OCE's blue-green channel. Bottom-reflected sunlight produced a sensor signal that was inversely related to water depth.

Kim, H. H.↗
NASA NTRS1984

Structural design of a vertical antenna boresight 18.3 by 18.3-m planar near-field antenna measurement system

A large very precise near-field planar scanner was proposed for NASA Lewis Research Center. This scanner would permit near-field measurements over a horizontal scan plane measuring 18.3 m by 18.3 m. Large aperture antennas mounted with antenna boresight vertical could be tested up to 60 GHz. When such a large near field scanner is used for pattern testing, the antenna or antenna system under test does not have to be moved. Hence, such antennas and antenna systems can be positioned and supported to simulate configuration in zero g. Thus, very large and heavy machinery that would be needed to accurately move the antennas are avoided. A preliminary investigation was undertaken to address the mechanical design of such a challenging near-field antenna scanner. The configuration, structural design and results of a parametric NASTRAN structural optimization analysis are contained. Further, the resulting design was dynamically analyzed in order to provide resonant frequency information to the scanner mechanical drive system designers. If other large near field scanners of comparable dimensions are to be constructed, the information can be used for design optimization of these also.

Sharp, G. R.↗
NASA NTRS1992

Nondestructive monitoring damage in composites using scanning laser acoustic microscopy

Several Nicalon fiber reinforced LAS (lithium alumino-silicate) glass matrix composites were tested to study the relation between the residual strength and the different amounts of damage. The samples were fatigued by four-point cyclic loading at a 5 Hz rate at 500 C for a different number of cycles. 10 MHz scanning laser acoustic microscope (SLAM) images were taken to monitor damage on the samples. Our SLAM results indicate that there were defects already existing throughout the sample before fatigue, and the resultant damage pattern from fatigue could be related to the initial defect distribution in the sample. Finally, the fatigued samples were fractured and the residual strength data could not be explained by the cyclic fatigue alone. Rather, the damage patterns evident in the SLAM images were needed to explain the scatter in the data. The results show that SLAM is useful in nondestructively monitoring damage and estimating residual strength of fatigued ceramic composites.

Wey, A. C.↗