Search NASA⌕ Search

SEARCH · Search NASA

Results for “semiconductor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Study of optical parameters of the Se-As chalcogenide semiconductor system containing EuF{sub 3} impurities

Optical properties of chalcogenide vitreous semiconductors of composition Se{sub 95}As{sub 5} containing different amounts of rare-earth metal fluorides (EuF{sub 3}) are studied, and, on this basis, the fundamental parameters, such as the refractive index and extinction coefficient, are determined. The dependences of these parameters on the content of EuF{sub 3} molecules are nonmonotonic: the low content (below 0.25 at %) aids in decreasing the parameters, whereas the high content tends to increase them. From the analysis of the results with consideration for the structural features of chalcogenide vitreous semiconductors of the Se{sub 95}As{sub 5} system (the presence of ordered high-coordinated microregions separated from each other by regions with a lower atomic density), it is concluded that the optical properties of the chalcogenide vitreous semiconductor system under study can be described in the context of Penn's model.

36 MATERIALS SCIENCE↗

Surface morphology and electrical properties of Au/Ni/ Left-Pointing-Angle-Bracket C Right-Pointing-Angle-Bracket /n-Ga{sub 2}O{sub 3}/p-GaSe Left-Pointing-Angle-Bracket KNO{sub 3} Right-Pointing-Angle-Bracket hybrid structures fabricated on the basis of a layered semiconductor with nanoscale ferroelectric inclusions

Features of the formation of Au/Ni/ Left-Pointing-Angle-Bracket C Right-Pointing-Angle-Bracket /n-Ga{sub 2}O{sub 3} hybrid nanostructures on a Van der Waals surface (0001) of 'layered semiconductor-ferroelectric' composite nanostructures (p-GaSe Left-Pointing-Angle-Bracket KNO{sub 3} Right-Pointing-Angle-Bracket ) are studied using atomic-force microscopy. The room-temperature current-voltage characteristics and the dependence of the impedance spectrum of hybrid structures on a bias voltage are studied. The current-voltage characteristic includes a resonance peak and a portion with negative differential resistance. The current attains a maximum at a certain bias voltage, when electric polarization switching in nanoscale three-dimensional inclusions in the layered GaSe matrix occurs. In the high-frequency region (f > 10{sup 6} Hz), inductive-type impedance (a large negative capacitance of structures, {approx}10{sup 6} F/mm{sup 2}) is detected. This effect is due to spinpolarized electron transport in a series of interconnected semiconductor composite nanostructures with multiple p-GaSe Left-Pointing-Angle-Bracket KNO{sub 3} Right-Pointing-Angle-Bracket quantum wells and a forward-biased 'ferromagnetic metal-semiconductor' polarizer (Au/Ni/ Left-Pointing-Angle-Bracket C Right-Pointing-Angle-Bracket /n{sup +}-Ga{sub 2}O{sub 3}/n-Ga{sub 2}O{sub 3}). A shift of the maximum (current hysteresis) is detected in the current-voltage characteristics for various directions of the variations in bias voltage.

36 MATERIALS SCIENCE↗

Absorptivity of semiconductors used in the production of solar cell panels

The dependence of the absorptivity of semiconductors on the thickness of the absorbing layer is studied for crystalline silicon (c-Si), amorphous silicon (a-Si), cadmium telluride (CdTe), copper indium diselenide (CuInSe{sub 2}, CIS), and copper gallium diselenide (CuGaSe{sub 2}, CGS). The calculations are performed with consideration for the spectral distribution of AM1.5 standard solar radiation and the absorption coefficients of the materials. It is shown that, in the region of wavelengths {lambda} = {lambda}{sub g} = hc/E{sub g}, almost total absorption of the photons in AM1.5 solar radiation is attained in c-Si at the thickness d = 7-8 mm, in a-Si at d = 30-60 {mu}m, in CdTe at d = 20-30 {mu}m, and in CIS and CGS at d = 3-4 {mu}m. The results differ from previously reported data for these materials (especially for c-Si). In previous publications, the thickness needed for the semiconductor to absorb solar radiation completely was identified with the effective light penetration depth at a certain wavelength in the region of fundamental absorption for the semiconductor.

36 MATERIALS SCIENCE↗

Features of the band structure and conduction mechanisms in the n-HfNiSn semiconductor heavily doped with Ru

The crystal and electronic structure and energy and kinetic properties of the n-HfNiSn semiconductor heavily doped with a Ru acceptor impurity are investigated in the temperature and Ru concentration ranges T = 80–400 K and N{sub A}{sup Ru} ≈ 9.5 × 10{sup 19}−5.7 × 10{sup 20} cm{sup −3} (x = 0–0.03), respectively. The mechanism of structural-defect generation is established, which changes the band gap and degree of compensation of the semiconductor and consists in the simultaneous concentration reduction and elimination of donor structural defects by means of the displacement of ∼1% of Ni atoms from the Hf (4a) positions, the generation of acceptor structural defects upon the substitution of Ru atoms for Ni atoms in the 4c positions, and the generation of donor defects in the form of vacancies in the Sn (4b) positions. The calculated electronic structure of HfNi{sub 1−x}Ru{sub x}Sn is consistent with the experiment. The results obtained are discussed within the Shklovsky-Efros model for a heavily doped and compensated semiconductor.

36 MATERIALS SCIENCE↗

Theory of the electronic structure of substitutional semiconductor alloys: Analytical approaches

Methods of predicting the electronic structure of disordered semiconductor alloys involving mainly isoelectronic substitution are reviewed. Special emphasis is placed on analytical methods of studying currently available models of alloys. An approximate equation for the localization threshold of electronic states in the Lifshitz model is considered, and the inaccuracy of this equation is estimated. The contributions of the perturbation potential of an individual impurity and of crystal-lattice distortions in the vicinity of the impurity center are analyzed on the basis of the Faddeev equations. The contributions of intrinsic impurity potentials and volume effects to the formation of the electronic structure of semiconductor alloys are esti- mated. Methods of calculating matrix elements of the perturbation potentials of isoelectronic impurities in alloys with consideration for deformation effects are considered. The procedure of calculating the compositional dependence of the band gap of multicomponent alloys is described. A comparative analysis of various methods for predicting the formation of electronic states bound at individual isoelectronic impurities in semiconductors is conducted. The theory of the energy spectrum of charged impurities in isoelectronic alloys is presented.

36 MATERIALS SCIENCE↗

On a chaotic potential at the surface of a compensated semiconductor under conditions of the self-assembly of electrically active defects

Natural irregularities of the electric potential on the surface of a semiconductor under conditions of the partial self-assembly of electrically active defects, i.e., on the formation of donor–acceptor pairs in depletion layers, are studied. The amplitude and character of the spatial distribution of the chaotic potential on the surface of a semiconductor in the cases of localized and delocalized states are determined. The dependence of the amplitude of the chaotic potential on the degree of compensation of the semiconductor is obtained.

36 MATERIALS SCIENCE↗

Application of B{sub 12}N{sub 12} and B{sub 12}P{sub 12} as two fullerene-like semiconductors for adsorption of halomethane: Density functional theory study

We examined and discussed the interaction of two halomethanes (mono-chloromethane (MCM), and mono-fluoromethane (MFM)) with B{sub 12}N{sub 12} and B{sub 12}P{sub 12} fullerene-like nanocages as semiconductor based on density functional theory (DFT). We calculated adsorption energies and followed the changes in the electronic structure of semiconductors upon adsorption of MCM and MFM. We found that the adsorption on the B{sub 12}N{sub 12} nano-cluster is energetically more favorable compared to B{sub 12}P{sub 12} nano-cluster. Also for both systems we found higher values of adsorption energy for MFM than for MCM. We found that upon adsorption of above-mentioned species on these two fullerene-like semiconductors, the HOMO–LUMO distributions and also the gap energy for each system did not change significantly, which correspond to the physisorption process. As a result, B{sub 12}N{sub 12} is a more appropriate nano-cluster to be used as a selective sensor for halomethanes, especially for MFM.

36 MATERIALS SCIENCE↗

Electron–Electron and Electron–Phonon Interactions in Graphene on a Semiconductor Substrate: Simple Estimations

The problem of epitaxial graphene formed on a semiconductor substrate is considered in the context of the extended Hubbard and Holstein–Hubbard models for electron–electron and electron–phonon interactions. The Haldane–Anderson model is chosen for the density of states of the substrate. Three regions of the phase diagram, specifically, spin- and charge-density waves and a spin- and charge-homogeneous paramagnetic state are considered. For a number of special cases used as examples, the similarities and differences of the electron states of graphene on semiconductor and metal substrates are demonstrated. It is shown that the main difference arises, if the Dirac point of graphene lies within the band gap of the semiconductor. Numerical estimations are performed for a SiC substrate.

36 MATERIALS SCIENCE↗

Discovery of III–V Semiconductors: Physical Properties and Application

This overview is devoted to the discovery, development of the technology, and investigation of III–V semiconductors performed at the Ioffe Institute, where the first steps in fabricating III–V semiconductors were taken in 1950 and investigations into their fundamental properties were begun under the leadership of two outstanding scientists—Nina Aleksandrovna Goryunova and Dmitry Nikolayevich Nasledov. Further development of these investigations is reflected in the works of followers and pupils of D.N. Nasledov, who have worked and continue to work at subsidiaries of the Ioffe Institute. The contribution of these investigations to studying heterostructures based on III–V compounds as well as to the development of semiconductor devices for electronics, optoelectronics, and photonics is considered.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Basic Requirements of Spin-Flip Raman Scattering on Excitonic Resonances and Its Modulation through Additional High-Energy Illumination in Semiconductor Heterostructures

We describe the major requirements to experimentally perform and observe resonant spin-flip Raman scattering on excitonic resonances in low-dimensional semiconductors. We characterize in detail the properties of this resonant light scattering technique and evaluate the criteria, which must be fulfilled by the experimental setup and the semiconductor sample studied to be able to observe a spin-flip scattering process. We also demonstrate the influence of additional unpolarized laser illumination with energies, which exceed considerably the band gap energy of the semiconductor nanostructure under study, on the resonantly excited electron spin-flip scattering in InAs-based quantum dot ensembles as well as on the paramagnetic Mn-ion spin-flip in (Zn,Mn)Se/(Zn,Be)Se quantum wells.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Formation of a Nanophase Wetting Layer and Metal Growth on a Semiconductor

Based on the data on the atomic density of a film and degree of its homogeneity during the formation of the interface between 3d transition metals (Cr, Co, Fe, or Cu) and silicon, a new concept of forming a contact between a reactive metal and a semiconductor has been justified. According to this concept, the low-temperature vapor-phase deposition of a metal onto a semiconductor is accompanied by the formation of a two-dimensional nanophase wetting layer of a metal or its mixture with silicon with a thickness of several monolayers, which significantly affects the interface formation and structure. This concept changes a perspective of forming a contact between a metal and a semiconductor substrate: it is necessary to take into account not only the formation of surface phases and clusters and/or the mixing process, but also the effect of elastic wetting of a substrate by the forming phases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electron Emission Properties of Submicron Semiconductor Particles

The electron emission properties of submicron Si, GaAs, InSb, and InAs semiconductor particles and their multigrain structures have been investigated. The effect of the properties of nanoparticles on the field and secondary emissions has been established. A scanning electron microscopy-based method for measuring the secondary emission coefficient of semiconductors has been proposed. The effect of photoexcitation of the multigrain structure of submicron semiconductor particles on their secondary emission properties has been investigated by the vacuum triode method.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spectroscopy of Charge Carriers and Traps in Field-Doped Organic Semiconductors

This research project aims to achieve quantitative and molecular level understanding of charge carriers and traps in field-doped organic semiconductors via in situ optical absorption spectroscopy, in conjunction with time-resolved electrical measurements. During the funding period, we have made major progress in three general areas: (1) probed charge injection at the interface between a polymeric semiconductor and a polymer electrolyte dielectric and developed a thermodynamic model to quantitatively describe the transition from electrostatic to electrochemical doping; (2) developed vibrational Stark effect to probe electric field at buried organic semiconductor interfaces; (3) used displacement current measurement (DCM) to study charge transport at organic/dielectric interfaces and charge injection at metal/organic interfaces.

36 MATERIALS SCIENCE↗

Photorefractive Semiconductors and Applications

Photorefractive semiconductors are attractive for information processing, becuase of fast material response, compatibility with semiconductor lasers, and availability of cross polarization diffraction for enhancing signal-to-noise ration. This paper presents recent experimental results on information processing using photorefractive GaAs, InP and CdTe, including image processing with semiconductor lasers.

Photorefractive Semiconductors↗

Monolithic High Power Semiconductor Seed Lasers near 2.05 µm

We report on the development and demonstration of a compact 2-micron semiconductor seed laser for CO2 lidar instruments. Our monolithic high-power fiber-pigtailed semiconductor seed laser will greatly enhance the operability and applicability of IPDA (Integrated Path Differential Absorption) lidar systems for high spatial and temporal resolution CO2 airborne measurements as well as future Earth-orbiting CO2 measurement missions. The compact semiconductor transmitter has a suitably narrow linewidth (less than 100 kilohertz) and enables flexible tuning (greater than 150 gigahertz) over several CO2 absorption lines in the 2.05-micron band.The frequency agility and multi-format modulation capability of the proposed technology, its small size and compatibility with standard DFB (Distributed FeedBack) lasers at the telecom band paves the way for adoption of the attractive 2.05-micron band for CO2 profiling and measurements.

Semiconductor Laser↗

Thermal Management of Power Semiconductor Packages - Matching Cooling Technologies with Packaging Technologies (Presentation)

Heat removal for power semiconductor devices is critical for robust operation. Because there are different packaging options, different thermal management technologies, and a range of applications, there is a need for a methodology to match cooling technologies and package configurations to target applications. To meet this need, a methodology was developed to compare the sensitivity of coolingtechnologies on the overall package thermal performance over a range of power semiconductor packaging configurations. The results provide insight into the trade-offs associated with cooling technologies and package configurations. The approach provides a method for comparing new developments in power semiconductor packages and identifying potential thermal control technologies for the package.The results can help users select the appropriate combination of packaging configuration and cooling technology for the desired application.

30 DIRECT ENERGY CONVERSION↗

Nanoscale doping of compound semiconductors by solid phase dopant diffusion

Achieving damage-free, uniform, abrupt, ultra-shallow junctions while simultaneously controlling the doping concentration on the nanoscale is an ongoing challenge to the scaling down of electronic device dimensions. Here, we demonstrate a simple method of effectively doping ΙΙΙ-V compound semiconductors, specifically InGaAs, by a solid phase doping source. This method is based on the in-diffusion of oxygen and/or silicon from a deposited non-stoichiometric silicon dioxide (SiO{sub x}) film on InGaAs, which then acts as donors upon activation by annealing. The dopant profile and concentration can be controlled by the deposited film thickness and thermal annealing parameters, giving active carrier concentration of 1.4 × 10{sup 18 }cm{sup −3}. Our results also indicate that conventional silicon based processes must be carefully reviewed for compound semiconductor device fabrication to prevent unintended doping.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ionic Liquid Activation of Amorphous Metal-Oxide Semiconductors for Flexible Transparent Electronic Devices

To begin this abstract, amorphous metal-oxide semiconductors offer the high carrier mobilities and excellent large-area uniformity required for high performance, transparent, flexible electronic devices; however, a critical bottleneck to their widespread implementation is the need to activate these materials at high temperatures which are not compatible with flexible polymer substrates. The highly controllable activation of amorphous indium gallium zinc oxide semiconductor channels using ionic liquid gating at room temperature is reported. Activation is controlled by electric field-induced oxygen migration across the ionic liquid-semiconductor interface. In addition to activation of unannealed devices, it is shown that threshold voltages of a transistor can be linearly tuned between the enhancement and depletion modes. Finally, the first ever example of transparent flexible thin film metal oxide transistor on a polyamide substrate created using this simple technique is demonstrated. Finally, this study demonstrates the potential of field-induced activation as a promising alternative to traditional postdeposition thermal annealing which opens the door to wide scale implementation into flexible electronic applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗