Search NASA⌕ Search

SEARCH · Search NASA

Results for “shape analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Design and analysis of a MEMS-based bifurcate-shape piezoelectric energy harvester

This paper presents a novel piezoelectric energy harvester, which is a MEMS-based device. This piezoelectric energy harvester uses a bifurcate-shape. The derivation of the mathematical modeling is based on the Euler-Bernoulli beam theory, and the main mechanical and electrical parameters of this energy harvester are analyzed and simulated. The experiment result shows that the maximum output voltage can achieve 3.3 V under an acceleration of 1 g at 292.11 Hz of frequency, and the output power can be up to 0.155 mW under the load of 0.4 MΩ. The power density is calculated as 496.79 μWmm{sup −3}. Besides that, it is demonstrated efficiently at output power and voltage and adaptively in practical vibration circumstance. This energy harvester could be used for low-power electronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Coupled-Channel Analysis of the χ c 1 ( 3872 ) Line Shape with BESIII Data

We perform a study of the χ c 1 ( 3872 ) line shape using the data samples of e + e − → γ χ c 1 ( 3872 ) , χ c 1 ( 3872 ) → D 0 D ¯ 0 π 0 , and π + π − J / ψ collected with the BESIII detector. The effects of the coupled channels and the off-shell D * 0 are included in the parametrization of the line shape. The line shape mass parameter is obtained to be M X = ( 3871.63 ± 0.1 3 − 0.05 + 0.06 ) MeV . Two poles are found on the first and second Riemann sheets corresponding to the D * 0 D ¯ 0 branch cut. The pole location on the first sheet is much closer to the D * 0 D ¯ 0 threshold than the other, and is determined to be 7.04 ± 0.1 5 − 0.08 + 0.07 MeV above the D 0 D ¯ 0 π 0 threshold with an imaginary part − 0.19 ± 0.0 8 − 0.19 + 0.14 MeV . Published by the American Physical Society 2024

Physics↗

G2Aero Database of Airfoils - Curated Airfoils

This dataset contains a curated set of 19,164 airfoil shapes from various applications and the data-driven design space of separable shape tensors (PGA space), which can be used as a parameter space for machine-learning applications focused on airfoil shapes. We constructed the airfoil dataset in two main stages. First, we identified 13 baseline airfoils from the NREL 5MW and IEA 15MW reference wind turbines. We reparameterized these shapes using least-squares fits of 8-order CST parametrizations, which involve 18 coefficients. By uniformly perturbing all 18 CST coefficients by +/-20% around each baseline airfoil, we generated 1,000 unique airfoils. Each airfoil was sampled with 1,001 shape landmarks whose x-coordinates followed a cosine distribution along the chord. This process resulted in a total of 13,000 airfoil shapes, each with 1,001 landmarks. In the second phase, we gathered additional airfoils from the extensive BigFoil database, which consolidates data from sources such as the University of Illinois Urbana-Champaign (UIUC) airfoil database, the JavaFoil database, the NACA-TR-824 database, and others. We undertook a thorough pre-processing step to filter out shapes with sparse, noisy, or incomplete data. We also removed airfoils with sharp leading edge and those exceeding our threshold for trailing edge thickness. Additionally, we thinned out the collection of NACA airfoils-- parametric sweeps of NACA airfoils with increasing thickness and camber present in BigFoil database-- by selecting every fourth step in the parameter sweeps. Finally, we regularized the airfoils by reparametrizing them with an 8-order CST parametrization (with 1,001 shape landmarks with x coordinated following cosine distribution along the chord) and removing airfoils with high reconstruction errors. This data pre-processing resulted in a set of 6,164 airfoils. In total, our curated airfoil dataset comprises 19,164 airfoils, each with 1,001 landmarks, and is stored in the curated_airfoils.npz file. Using this curated airfoil dataset, we utilized the separable shape tensors framework to develop a data-driven parameterization of airfoils based on principal geodesic analysis (PGA) of separable shape tensors. This PGA space is provided in PGAspace.npz file.

airfoils↗

Accuracy analysis of the semi-analytical method for shape sensitivity calculation

The semianalytical method, widely used for calculating derivatives of static response with respect to design variables for structures modeled by finite elements, is studied in this paper. The paper shows that the method can have serious accuracy problems for shape design variables in structures modeled by beam, plate, truss, frame, and solid elements. The errors are shown to be associated with the structural model. An error index is developed to test the accuracy of the semianalytical method. It characterizes the difference in errors between a general finite-difference method and the semianalytical method. Moreover, a method for improving the accuracy of the semianalytical method (when possible) is provided. Examples are presented to demonstrate the use of the error index.

Barthelemy, Bruno↗

Boundary formulations for sensitivities of three-dimensional stress invariants

The direct, singular, boundary element analysis (BEA) formulation has been shown to provide a basis for a computationally efficient and accurate shape structural design sensitivity analysis (DSA) approach for three-dimensional solid objects. Within the boundary element analysis context, the theoretical formulation for sensitivities of important stress-related quantities including principal and deviatoric stresses, von Mises, maximum shear, and other stress invariants are presented, both for the surface as well as the interior of a continuum structure. Numerical results are given to demonstrate the accuracy of this approach.

Guru Prasad, K.↗

Finite-element-analysis model and preliminary ground testing of controls-structures interaction evolutionary model reflector

Results of two different nonlinear finite element analyses and preliminary test results for the final design of the Controls-Structures Interaction Evolutionary Model are presented. Load-deflection data bases are generalized from analysis and testing of the 16-foot diameter, dish shaped reflector. Natural frequencies and mode shapes are obtained from vibrational analysis. Experimental and analytical results show similar trends; however, future test hardware modifications and finite element model refinement would be necessary to obtain better correlation. The two nonlinear analysis procedures are both adequate techniques for the analysis of prestressed structures with complex geometries.

Reaves, Mercedes C.↗

End block dynamics in unentangled polymers by dielectric spectroscopy

Dielectric spectroscopy measures the dynamics of polymer melts over a broad frequency range. Developing a theory for the spectral shape can extend the analysis of dielectric spectra beyond determining relaxation times from the peak maxima and adds physical meaning to shape parameters determined with empirical fit functions. Toward this goal, we use the experimental results on unentangled poly(isoprene), and unentangled poly(butylene oxide), polymer melts, to test whether the concept of end blocks could be one reason for the Rouse model deviating from experimental data. These end blocks have been suggested by simulations and neutron spin echo spectroscopy and are a consequence of the monomeric friction coefficient depending on the position of the bead in the chain. The concept of an end block is an approximation which partitions the chain in a middle and two end blocks to avoid overparameterization by a continuous position dependent change of the friction parameter. Analysis of dielectric spectra shows that the deviations of the calculated from the experimental normal mode cannot be related to the end block relaxation. However, the results do not contradict an end block hiding below the segmental relaxation peak. Finally, it seems that the results are compatible with an end block being the specific part of the sub-Rouse chain interpretation close to the chain ends.

36 MATERIALS SCIENCE↗

Aerodynamic shape optimization directed toward a supersonic transport using sensitivity analysis

This investigation was conducted from March 1994 to August 1995, primarily, to extend and implement the previously developed aerodynamic design optimization methodologies for the problems related to a supersonic transport design. These methods had demonstrated promise to improve the designs (more specifically, the shape) of aerodynamic surfaces, by coupling optimization algorithms (OA) with Computational Fluid Dynamics (CFD) algorithms via sensitivity analyses (SA) with surface definition methods from Computer Aided Design (CAD). The present extensions of this method and their supersonic implementations have produced wing section designs, delta wing designs, cranked-delta wing designs, and nacelle designs, all of which have been reported in the open literature. Despite the fact that these configurations were highly simplified to be of any practical or commercial use, they served the algorithmic and proof-of-concept objectives of the study very well. The primary cause for the configurational simplifications, other than the usual simplify-to-study the fundamentals reason, were the premature closing of the project. Only after the first of the originally intended three-year term, both the funds and the computer resources supporting the project were abruptly cut due to their severe shortages at the funding agency. Nonetheless, it was shown that the extended methodologies could be viable options in optimizing the design of not only an isolated single-component configuration, but also a multiple-component configuration in supersonic and viscous flow. This allowed designing with the mutual interference of the components being one of the constraints all along the evolution of the shapes.

Baysal, Oktay↗

Shapes of ideal stalagmites

Stalagmites are isolated columns of calcium carbonate growing on a cave floor; their growth is driven by the constant dripping of supersaturated solutions from the roof of the cave. In this paper, we derive a closed-form expression for the shape of a steadily growing stalagmite. Our analysis gives rise to three distinct shapes, all of them observable in nature, with the shape characterized by a single dimensionless parameter. Transitions between different shapes occur at a specific value of this parameter, with additional selection rules determining the shape and size of stalagmites evolving under specific cave conditions. Our theory shows that the stalagmite shape influences the 13 C isotope shifts, which are an important source of paleoclimatic information.

invariant growth↗

Practical guide to understanding goodness-of-fit metrics used in chemical state modeling of x-ray photoelectron spectroscopy data by synthetic line shapes using nylon as an example

Chemical state analysis of a sample surface through fitting bell-shaped curves to x-ray photoelectron spectroscopic polymer data is reviewed using nylon to introduce and discuss aspects of data analysis. Different strategies for modeling chemistry in nylon spectra are presented and in so doing, a case is made to include in published science the design logic and implementation in terms of line shapes and optimization parameter constraints between components in a peak model. Imperfections in line shape relative to the true shape for photoemission lines, when compensated for using constraints to optimization parameters, are shown to provide chemical state information about a sample that justify, for peak models constructed with these limitations, metrics for goodness-of-fit different from those expected for pulse-counted data.

Materials Science↗

Symmetric Rydberg controlled- Z gates with adiabatic pulses

We analyze neutral atom Rydberg C Z gates based on adiabatic pulses applied symmetrically to both atoms. Analysis with smooth pulse shapes and Cs atom parameters predicts the gates can create Bell states with fidelity F > 0.999 using adiabatic rapid passage (ARP) pulses. With globally optimized adiabatic pulse shapes, in a two-photon excitation process, we generate Bell states with fidelity F = 0.997. The analysis fully accounts for spontaneous emission from intermediate and Rydberg states, including the Rydberg lifetime in a room temperature environment, but does not include errors arising from laser noise. In conclusion, the gate protocols do not require individual addressing and are shown to be robust against Doppler shifts due to atomic motion.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Investigating Some Technical Issues on Cohesive Zone Modeling of Fracture

This study investigates some technical issues related to the use of cohesive zone models (CZMs) in modeling fracture processes. These issues include: why cohesive laws of different shapes can produce similar fracture predictions; under what conditions CZM predictions have a high degree of agreement with linear elastic fracture mechanics (LEFM) analysis results; when the shape of cohesive laws becomes important in the fracture predictions; and why the opening profile along the cohesive zone length needs to be accurately predicted. Two cohesive models were used in this study to address these technical issues. They are the linear softening cohesive model and the Dugdale perfectly plastic cohesive model. Each cohesive model constitutes five cohesive laws of different maximum tractions. All cohesive laws have the same cohesive work rate (CWR) which is defined by the area under the traction-separation curve. The effects of the maximum traction on the cohesive zone length and the critical remote applied stress are investigated for both models. For a CZM to predict a fracture load similar to that obtained by an LEFM analysis, the cohesive zone length needs to be much smaller than the crack length, which reflects the small scale yielding condition requirement for LEFM analysis to be valid. For large-scale cohesive zone cases, the predicted critical remote applied stresses depend on the shape of cohesive models used and can significantly deviate from LEFM results. Furthermore, this study also reveals the importance of accurately predicting the cohesive zone profile in determining the critical remote applied load.

Wang, John T.↗

Simple method for prediction of aircraft noise contours

A method for generating noise contours more rapidly and more simply than previously used programs is discussed. The method gives the area, the noise contour, and its extremities for an arbitrarily complex flight path for both takeoffs and landings with relative ease. The analysis reveals the fundamental nature of the contours and how the various factors that influence its size and shape enter into the analysis. It is noted that the effects of ground attenuation and shielding are omitted as they are important only on the initial portion of flight and are highly dependent upon aircraft configuration. However, the analysis shows that these effects could be included. It is emphasized the the single-event contour is an obvious choice for purposes of minimizing noise impact.

Stewart, E. C.↗

Pulse shape discrimination in CUPID-Mo using principal component analysis

CUPID-Mo is a cryogenic detector array designed to search for neutrinoless double-beta decay ($0\nu\beta\beta$) of $^{100}$Mo. It uses 20 scintillating $^{100}$Mo-enriched Li$_2$MoO$_4$ bolometers instrumented with Ge light detectors to perform active suppression of $\alpha$ backgrounds, drastically reducing the expected background in the $0\nu\beta\beta$ signal region. As a result, pileup events and small detector instabilities that mimic normal signals become non-negligible potential backgrounds. These types of events can in principle be eliminated based on their signal shapes, which are different from those of regular bolometric pulses. We show that a purely data-driven principal component analysis based approach is able to filter out these anomalous events, without the aid of detector response simulations.

47 OTHER INSTRUMENTATION↗