SEARCH · Search NASA
Results for “solid dynamics”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Short time proton dynamics in bulk ice and in porous anode solid oxide fuel cell materials
Oxygen reduction and incorporation into solid electrolytes and the reverse reaction of oxygen evolution play a cru-cial role in Solid Oxide Fuel Cell (SOFC) applications. However a detailed un derstanding of the kinetics of the cor-responding reactions, i.e. on reaction mechanisms, rate limiting steps, reaction paths, electrocatalytic role of materials, is still missing. These include a thorough characterization of the binding potentials experienced by protons in the lattice. We report results of Inelastic Neutron Scattering (INS) measurements of the vibrational state of the protons in Ni- YSZ highly porous composites (75% to 90% ), a ceramic-metal material showing a high electrical conductivity and ther mal stability, which is known to be most effectively used as anodes for solid ox ide fuel cells. The results are compared with INS and Deep Inelastic Neutron Scattering (DINS) experiments on the proton binding states in bulk ice.
Liquid-like thermal conduction in intercalated layered crystalline solids
As a generic property, all substances transfer heat through microscopic collisions of constituent particles. A solid conducts heat through both transverse and longitudinal acoustic phonons, but a liquid employs only longitudinal vibrations. As a result, a solid is usually thermally more conductive than a liquid. In canonical viewpoints, such a difference also serves as the dynamic signature distinguishing a solid from a liquid. Here in this work, we report liquid-like thermal conduction observed in the crystalline AgCrSe 2 . The transverse acoustic phonons are completely suppressed by the ultrafast dynamic disorder while the longitudinal acoustic phonons are strongly scattered but survive, and are thus responsible for the intrinsically ultralow thermal conductivity. This scenario is applicable to a wide variety of layered compounds with heavy intercalants in the van der Waals gaps, manifesting a broad implication on suppressing thermal conduction. Finally, these microscopic insights might reshape the fundamental understanding on thermal transport properties of matter and open up a general opportunity to optimize performances of thermoelectrics.
Polarized Solid Targets - Present and Future
The development, in the early 1960s, of the dynamic nuclear polarization scheme in solid diamagnetic materials, doped with paramagnetic radicals, led to the use of solid polarized H and D targets in numerous nuclear and particle physics experiments. Since then steady progress has been made in all contributing sub-systems so that proton polarization values around 90% and deuteron polarization values between 40% and 80% have been achieved in various set-ups. These polarization values have been measured with a relative accuracy of {+-}5% or better using nuclear magnetic resonance techniques. Many experiments with reasonably high luminosities have taken advantage of these developments and many more are being planned, especially with electromagnetic probes. Latest developments open up the possibility to use DNP hyperpolarized substances for medical applications.
Structural, Chemical, and Dynamical Frustration: Origins of Superionic Conductivity in closo -Borate Solid Electrolytes
Li 2 B 12 H 12 , Na 2 B 12 H 12 , and their closo-borate relatives exhibit unusually high ionic conductivity, making them attractive as a new class of candidate electrolytes in solid-state Li- and Na-ion batteries. However, further optimization of these materials requires a deeper understanding of the fundamental mechanisms underlying ultrafast ion conduction. To this end, we use ab initio molecular dynamics simulations and density-functional calculations to explore the motivations for cation diffusion. We find that superionic behavior in Li 2 B 12 H 12 and Na 2 B 12 H 12 results from a combination of key structural, chemical, and dynamical factors that introduce intrinsic frustration and disorder. A statistical metric is used to show that the structures exhibit a high density of accessible interstitial sites and site types, which correlates with the flatness of the energy landscape and the observed cation mobility. Furthermore, cations are found to dock to specific anion sites, leading to a competition between the geometric symmetry of the anion and the symmetry of the lattice itself, which can facilitate cation hopping. Finally, facile anion reorientations and other low-frequency thermal vibrations lead to fluctuations in the local potential that enhance cation mobility by creating a local driving force for hopping. In conclusion, we discuss the relevance of each factor for developing new ionic conductivity descriptors that can be used for discovery and optimization of closo-borate solid electrolytes, as well as superionic conductors more generally.
On the metastability of the hexatic phase during the melting of two-dimensional charged particle solids
For two-dimensional many-particle systems, first-order, second-order, single step continuous, as well as two-step continuous (KTHNY-like) melting transitions have been found in previous studies. Recent computer simulations, using particle numbers in the ≥10{sup 5} range, as well as a few experimental studies, tend to support the two-step scenario, where the solid and liquid phases are separated by a third, so called hexatic phase. We have performed molecular dynamics simulations on Yukawa (Debye-Hückel) systems at conditions earlier predicted to belong to the hexatic phase. Our simulation studies on the time needed for the equilibration of the systems conclude that the hexatic phase is metastable and disappears in the limit of long times. We also show that simply increasing the particle number in particle simulations does not necessarily result in more accurate conclusions regarding the existence of the hexatic phase. The increase of the system size has to be accompanied with the increase of the simulation time to ensure properly thermalized conditions.
Neutron scattering and neural-network quantum molecular dynamics investigation of the vibrations of ammonia along the solid-to-liquid transition
Abstract Vibrational spectroscopy allows us to understand complex physical and chemical interactions of molecular crystals and liquids such as ammonia, which has recently emerged as a strong hydrogen fuel candidate to support a sustainable society. We report inelastic neutron scattering measurement of vibrational properties of ammonia along the solid-to-liquid phase transition with high enough resolution for direct comparisons to ab-initio simulations. Theoretical analysis reveals the essential role of nuclear quantum effects (NQEs) for correctly describing the intermolecular spectrum as well as high energy intramolecular N-H stretching modes. This is achieved by training neural network models using ab-initio path-integral molecular dynamics (PIMD) simulations, thereby encompassing large spatiotemporal trajectories required to resolve low energy dynamics while retaining NQEs. Our results not only establish the role of NQEs in ammonia but also provide general computational frameworks to study complex molecular systems with NQEs.
Study of solid molecular deuterium D 2 growth under gas pressure
The injection of high-speed cryogenic pellets made of frozen hydrogen-isotopes, represents to date the most effective method to fuel magnetically confined thermonuclear fusion plasmas. Additionally, the injection of very large pellets composed of cryogenic solid of some suitable impurity (typically a noble-gas such as H 2 , Ne, or H 2 /Ne, D 2 /Ne mixtures), shattered in relatively small fragments just before entering the plasma, seems to be the most promising method to reduce the damage risks for the plasma-facing components in case of a plasma disruption. This technology, known as "Shattered Pellet Injection" (SPI), allows to spread out the plasma energy and mitigate possible damage to the in-vessel components, as well as to densify the plasma to suppress the formation of runaway electrons, and/or dissipate their energy. Several techniques to produce and launch cryogenic pellets have been investigated in the past decades. "Pipe gun" injectors are reliable and relatively simple devices are still commonly used today. They make use of single- or two-stage pneumatic light-gas guns to accelerate the pellet at high speeds. In these injectors, the cryogenic pellets are formed “ in situ ” (i.e., inside the launching barrel), by de-sublimating them directly from the gas phase, i.e., at temperatures and pressures below those of the triple point. The simplest case is pure deuterium pellets ($\mathcal{T}$ < 18.7 K, $\mathcal{P}$ < 171.3 hPa). The production of good quality solid deuterium, capable of withstanding the mechanical stress during the acceleration of the pellets, is a key issue. To this end the phase transition of deuterium from gas to solid (and vice versa) is modeled with extensive molecular-dynamics (MD) simulations. Furthermore, the solid growth from the gas phase is simulated in an ample range of temperatures and pressures, to find the best compromise between growth velocity and mechanical properties of the resulting solid system.
Dynamic Tuning of Gap Plasmon Resonances Using a Solid-State Electrochromic Device
Plasmonic antennas and metasurfaces can effectively control light–matter interactions, and this facilitates a deterministic design of optical materials properties, including structural color. However, these optical properties are generally fixed after synthesis and fabrication, while many modern-day optics applications require active, low-power, and nonvolatile tuning. These needs have spurred broad research activities aimed at identifying materials and resonant structures capable of achieving large, dynamic changes in optical properties, especially in the challenging visible spectral range. In this work, we demonstrate dynamic tuning of polarization-dependent gap plasmon resonators that contain the electrochromic oxide WO 3 . Its refractive index in the visible changes continuously from n = 2.1 to 1.9 upon electrochemical lithium insertion and removal in a solid-state device. By incorporating WO 3 into a gap plasmon resonator, the resonant wavelength can be shifted continuously and reversibly by up to 58 nm with less than 2 V electrochemical bias voltage. Lastly, the resonator can remain in a tuned state for tens of minutes under open circuit conditions.
AI-powered exploration of molecular vibrations, phonons, and spectroscopy
The vibrational dynamics of molecules and solids play a critical role in defining material properties, particularly their thermal behaviors. However, theoretical calculations of these dynamics are often computationally intensive, while experimental approaches can be technically complex and resource-demanding. Recent advancements in data-driven artificial intelligence (AI) methodologies have substantially enhanced the efficiency of these studies. This review explores the latest progress in AI-driven methods for investigating atomic vibrations, emphasizing their role in accelerating computations and enabling rapid predictions of lattice dynamics, phonon behaviors, molecular dynamics, and vibrational spectra. Key developments are discussed, including advancements in databases, structural representations, machine-learning interatomic potentials, graph neural networks, and other emerging approaches. Compared to traditional techniques, AI methods exhibit transformative potential, dramatically improving the efficiency and scope of research in materials science. The review concludes by highlighting the promising future of AI-driven innovations in the study of atomic vibrations.
Dynamic Observation of Dendritic Quasicrystal Growth upon Laser-Induced Solid-State Transformation
In this paper, we report the laser-induced solid-state transformation between a periodic “approximant” and quasicrystal in the Al-Cr system during rapid quenching. Dynamic transmission electron microscopy allows us to capture in situ the dendritic growth of the metastable quasicrystals. The formation of dendrites during solid-state transformation is a rare phenomenon, which we attribute to the structural similarity between the two intermetallics. Through ab initio molecular dynamics simulations, we identify the dominant structural motif to be a 13-atom icosahedral cluster transcending the phases of matter.
Effects of solid aerosols on partially glaciated clouds
Sensitivity tests were conducted using a state‐of‐the‐art aerosol–cloud to investigate the key microphysical and dynamical mechanisms by which solid aerosols affect glaciated clouds. The tests involved simulations of two contrasting cases of deep convection—a tropical maritime case and a midlatitude continental case, in which solid aerosol concentrations were increased from their pre‐industrial (1850) to their present‐day (2010) levels. In the midlatitude continental case, the boosting of the number concentrations of solid aerosols weakened the updrafts in deep convective clouds, resulting in reduced snow and graupel production. Consequently, the cloud fraction and the cloud optical thickness increased with increasing ice nuclei (IN), causing a negative radiative flux change at the top of the atmosphere (TOA), that is, a cooling effect of −1.96 ± 0.29 W/m 2 . On the other hand, in the tropical maritime case, increased ice nuclei invigorated upper‐tropospheric updrafts in both deep convective and stratiform clouds, causing cloud tops to shift upwards. Snow production was also intensified, resulting in reduced cloud fraction and cloud optical thickness, hence a positive radiative flux change at the TOA—a warming effect of 1.02 ± 0.36 W/m 2 was predicted.
Solid electrolyte interphase formation between the Li 0.29 La 0.57 TiO 3 solid-state electrolyte and a Li-metal anode: an ab initio molecular dynamics study
An ab initio molecular dynamics study of an electrochemical interface between a solid-state-electrolyte Li 0.29 La 0.57 TiO 3 and Li-metal to analyze interphase formation and evolution when external electric fields are applied.
Simulating the mechanisms of serrated flow in interstitial alloys with atomic resolution over diffusive timescales
Abstract The Portevin-Le Chatelier (PLC) effect is a phenomenon by which plastic slip in metallic materials becomes unstable, resulting in jerky flow and the onset of inhomogeneous deformation. The PLC effect is thought to be fundamentally caused by the dynamic interplay between dislocations and solute atoms. However, this interplay is almost always inaccessible experimentally due to the extremely fine length and time scales over which it occurs. In this paper, simulations of jerky flow in W-O interstitial solid solutions reveal three dynamic regimes emerging from the simulated strain rate-temperature space: one resembling standard solid solution strengthening, another one mimicking solute cloud formation, and a third one where dislocation/solute coevolution leads to jerky flow as a precursor of dynamic strain aging. The simulations are carried out in a stochastic framework that naturally captures rare events in a rigorous manner, providing atomistic resolution over diffusive time scales using no adjustable parameters.
Inertia forces in robots and manipulators
A method is described for the simulation of the dynamic behavior (inertia forces) of a solid performing a tridimensional motion, wherein a discrete system of mass points rigidly attached to the solid is used. Three postulates are necessary and sufficient for dynamical equivalence: (1) the mass of the solid and the total of the concentrated masses should be equal, (2) the center of gravity of the solid and of the discrete system should coincide, and (3) the inertial ellipsoid of the solid and of the discrete system should be equal.
Dynamic Length-Scale Characterization and Nonequilibrium Statistical Mechanics of Transport in Open-Cell Foams
Nuclear magnetic resonance measurements of scale dependent dynamics in a random solid open-cell foam reveal a characteristic length scale for transport processes in this novel type of porous medium. These measurements and lattice Boltzmann simulations for a model foam structure indicate dynamical behavior analogous to lower porosity consolidated granular porous media, despite extremely high porosity in solid cellular foams. Scaling by the measured characteristic length collapses data for different foam structures as well as consolidated granular media. The nonequilibrium statistical mechanics theory of preasymptotic dispersion, developed for hierarchical porous media, is shown to model the hydrodynamic dispersive transport in a foam structure.
A Self-Healable Sulfide/Polymer Composite Electrolyte for Long-Life, Low-Lithium-Excess Lithium-Metal Batteries
Solid electrolyte-protected lithium-metal anodes promise energy-dense, safe cells. While sulfide solid electrolytes enable facile processability and fast ion transport, they suffer from complex chemo-mechanical issues, including Li plating-induced fracture and Li stripping-induced contact loss. To address these issues, a grafting approach is implemented to functionalize the sulfide solid electrolyte (Li 3,85 Sn 0.85 Sb 0.15 S 4 ) with a self-healing unit. This leads to a dynamic bonding between the solid electrolyte network and a mechanically robust polymer scaffold, which reversibly accommodates the volume changes of the lithium-metal anode. Thus, the approach improves the interfacial contact between the lithium-metal anode and the composite electrolyte, enabling stable cycling at a mild stack pressure (160 kPa). With a negative to positive capacity ratio equals to 1, pouch full cells with a high-nickel cathode (nickel content > 90%) and lithium-metal anode display 92% capacity retention for 140 cycles. Engineering the interface between solid electrolyte and the polymeric binder offers a promising pathway to address the chemo-mechanical issues.
Two-dimensional phase cartography for high-harmonic spectroscopy
Extremely nonlinear spectroscopy based on high-order-harmonic generation has become a powerful investigation method for attosecond dynamics in gas and solid targets. In particular, the phase of harmonic emission was shown to carry profound insight into atomic and molecular structure and dynamics. However, current techniques offer phase measurements only along specific directions, thus providing partial characterization. Here we report on a new approach combining optical and quantum interferometers measuring along two dimensions the intensity and phase of harmonic emission from aligned molecules in the exact same experimental conditions. This two-dimensional cartography technique measures the phase with no arbitrary offset and no uncertainty on its sign. Measurements along different dimensions can be combined in two ways: either a single mapping or a redundant mapping allowing high-precision phase recovery using a Shack–Hartmann-like algorithm. We demonstrate both methods in a nitrogen test case, which allows disentangling structural and dynamical effects. Two-dimensional phase cartography paves the way to high-resolution high-harmonic spectroscopy for applications such as quantum orbital tomography and attosecond charge migration in molecules.