Search NASA⌕ Search

SEARCH · Search NASA

Results for “solution phase”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

LSENS: A General Chemical Kinetics and Sensitivity Analysis Code for homogeneous gas-phase reactions. Part 1: Theory and numerical solution procedures

LSENS, the Lewis General Chemical Kinetics and Sensitivity Analysis Code, has been developed for solving complex, homogeneous, gas-phase chemical kinetics problems and contains sensitivity analysis for a variety of problems, including nonisothermal situations. This report is part 1 of a series of three reference publications that describe LENS, provide a detailed guide to its usage, and present many example problems. Part 1 derives the governing equations and describes the numerical solution procedures for the types of problems that can be solved. The accuracy and efficiency of LSENS are examined by means of various test problems, and comparisons with other methods and codes are presented. LSENS is a flexible, convenient, accurate, and efficient solver for chemical reaction problems such as static system; steady, one-dimensional, inviscid flow; reaction behind incident shock wave, including boundary layer correction; and perfectly stirred (highly backmixed) reactor. In addition, the chemical equilibrium state can be computed for the following assigned states: temperature and pressure, enthalpy and pressure, temperature and volume, and internal energy and volume. For static problems the code computes the sensitivity coefficients of the dependent variables and their temporal derivatives with respect to the initial values of the dependent variables and/or the three rate coefficient parameters of the chemical reactions.

Radhakrishnan, Krishnan↗
DOE OSTI2019

Microkinetic modeling of aqueous phase biomass conversion: Application to ethylene glycol reforming

In this communication, we develop automatically a reaction network for ethylene glycol reforming on Pt. We employ a recently introduced group additivity scheme for estimation of thermochemistry over metal catalysts in vapor phase and in solution along with Brønsted-Evans-Polanyi (BEP) relations for vapor phase kinetics to parameterize microkinetic models for vapor and aqueous phases. Unlike vapor-phase reforming, we show that solvent occupies a significant fraction of surface sites and by doing this, it shifts the water-gas shift reaction to CO2 and H2 and avoids poisoning of the catalyst by CO. The model is found to be in reasonable agreement with the experimental data.

bio-inspired↗
DOE OSTI2020

Engineering Multi-scale B2 Precipitation in a Heterogeneous FCC Based Microstructure to Enhance the Mechanical Properties of a Al0.5Co1.5CrFeNi1.5 High Entropy Alloy

While ordered L12 or gamma prime precipitates in face centered cubic (FCC) based microstructures have been extensively used for strengthening Nickel or Cobalt base superalloys, and more recently in high entropy alloys (HEAs) or complex concentrated alloys (CCAs), the possibility of exploiting ordered B2 precipitates in FCC-based systems has been relatively less investigated. The present study shows the propensity of developing a heterogeneous microstructure, consisting of two different distributions of FCC grain sizes, and two different size scales of B2 precipitates, within an FCC-based Al0.5Co1.5CrFeNi1.5 HEA/CCA. This alloy composition has been designed using solution thermodynamics-based modeling such that it has a high phase fraction and solvus temperature of the B2 phase. The resulting heterogenous microstructure exhibited an approximately 400% increase in yield strength with respect to the single-phase FCC solid solution condition of the same alloy while maintaining very good tensile ductility ~20 %.

Dasari, Sriswaroop↗
DOE OSTI2019

Effect of electronic energy dissipation on strain relaxation in irradiated concentrated solid solution alloys

The effect of energy deposition by energetic particles on Ni and two single-phase concentrated solid solution alloys (NiFe and NiCoCrFe) is explored through combined experimental and modelling efforts. Damage evolution as a function of increasing ion fluence is monitored via elastic strain developed in the irradiated crystals. We show that damage produced from displacement collision cascades is sensitive to subsequent highly ionizing irradiation that the strain generated by elastic nuclear collisions undergoes partial relaxation upon high-energy irradiation. This result suggests a change in the damage structure upon electronic energy deposition due to both predominant defect annealing and growth of small defect clusters. Strain relaxation, more pronounced in the alloys than in Ni, is ascribed to both higher thermal conductivity and weaker electron-phonon coupling in Ni.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Corrosion Behavior of Fe-7Cr-1Mo-12Zr Metal Waste Form Alloy in Simulated Repository Environment

Metal waste forms (MWF) are solid metallic waste categorized as high-level radioactive waste generated during pyro-reprocessing of spent metallic fuels and geologically disposed off. This waste form generated requires an excellent corrosion resistance in a geological repository environment. In the present work, Fe-7Cr-1Mo-12Zr MWF alloy was developed by casting in an arc melting furnace. The x-ray diffraction analysis revealed the formation of stable phases of α-Fe solid solution and the intermetallic phases of Fe{sub 2}Zr and Fe{sub 23}Zr{sub 6}. The corrosion behavior of Fe-7Cr-1Mo-12Zr alloy was investigated using electrochemical techniques in aggressive (highly acidic with Cl{sup −}) and nominal repository pH environment. Cyclic potentiodynamic polarization studies indicated the shift in corrosion potential toward cathodic potential in highly acidic solution with Cl{sup −}. The corrosion mechanism of pitting is associated with acidified pH medium with more Cl{sup −}, whereas uniform corrosion or transpassive dissolution is resultant of mild acidity or mild alkaline medium. The passive region is wider in pH 5 and 8 when compared to pH 1 and 3. Electrochemical impedance spectroscopic (EIS) analysis revealed the lowering of passive film stability in the highly acidic medium in the presence of Cl{sup −}. The role of passive oxide layers on the corrosion resistance of the Fe-7Cr-1Mo-12Zr MWF alloy is discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Impacts of hydrogen bonding interactions with Np(v/vi)O 2 Cl 4 complexes: vibrational spectroscopy, redox behavior, and computational analysis

The neptunyl (Np(V)O 2 + /Np(VI)O 2 2+ ) cation is the dominant form of 237 Np in acidic aqueous solutions and the stability of the Np(V) and Np(VI) species is driven by the specific chemical constituents present in the system. Hydrogen bonding with the oxo group may impact the stability of these species, but there is limited understanding of how these intermolecular interactions influence the behavior of both solution and solid-state species. In the current study, we systematically evaluate the interactions between the neptunyl tetrachloride species and hydrogen donors in coordination complexes and in the related aqueous solutions. Both Np(V) compounds (N 2 C 4 H 12 ) 2 [Np(V)O 2 Cl 4 ]Cl (Np(V)pipz) and (NOC 4 H 10 ) 3 [Np(V)O 2 Cl 4 ] (Np(V)morph) exhibit directional hydrogen bonding to the neptunyl oxo group while Np(VI) compounds (NC 5 H 6 ) 2 [Np(VI)O 2 Cl 4 ] (Np(VI)pyr) and (NOC 4 H 10 ) 4 [Np(VI)O 2 Cl 4 ]·2Cl (Np(VI)morph) assemble via halogen interactions. Here, the Raman spectra of the solid-state phases indicate the activation of vibrational bands when there is asymmetry of the neptunyl bond, while these spectral features are not observed within the related solution phase spectra. Density functional theory calculations of the Np(V)pipz system suggest that activation of the ν 3 asymmetric stretch and other combination modes lead to additional complexity within the solid-state spectra. Electrochemical analyses of complexes in the solution phases are consistent with the results of the crystallization experiments as the voltammetric potentials of Np(V)/Np(VI) complexes in the presence of protonated heterocycles differ from the potentials of pure Np(V) and may correlate with the hydrogen bonding interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

A comparative characterization of defect structure in NiCo and NiFe equimolar solid solution alloys under in situ electron irradiation

Dislocation loops in NiCo and NiFe, both being single-phase, equimolar solid solution alloys, are generated by in situ high-voltage electron irradiation and characterized inside a transmission electron microscope. In addition to the different defect growth rates, the two alloys present dislocation loops with distinct shape evolution and element segregation, which reflect the element-sensitive, intrinsic properties (e.g., defect energetics, lattice distortion, and local ordering) of the alloys. These results provide evidence that the structure and dynamics of radiation-induced defects in concentrated alloys depend on not only the number but also the species of alloying elements.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Increased Defect Resistance and Ordering in MnBi 2 (Se 1– x Te x ) 4 via Accurate Diffusion Monte Carlo

Stabilizing materials and controlling defect formation remain key challenges in materials science, particularly for theory, where small energy differences must be resolved for accurate predictions. Here, we applied state-of-the-art theoretical methods to topological materials, focusing on MnBi 2 Te 4 (MBT), which is a promising intrinsic magnetic topological insulator. Antisite defects in MBT alter its electronic structure and magnetism, degrading topological properties and causing experimental inconsistencies. Using diffusion Monte Carlo and density functional theory, we investigated the thermodynamic stability and defect formation in MBT, MnBi 2 Se 4 (MBS), and MnBi 2 (Se 1–x Te x ) 4 . We found that MnBi 2 Se 2 Te 2 can be stable at finite temperatures, with higher defect formation energies due to stronger Mn–Se bonding and reduced internal strain. Se preferentially substitutes Te near Mn instead of Te in the outer layer, encouraging long-range ordering when incorporated. For MnBi 2 (Se 1–x Te x ) 4 , cluster expansion phase diagrams revealed solid solution behavior when x <0.5 and phase separation for larger x. MBT and MBS are topological insulators; therefore, the MnBi 2 (Se 1–x Te x ) 4 family could offer tunable topological behavior and improved stability.

MnBi2Te4↗
NASA NTRS1977

Applicability of empirical data currently used in predicting solid propellant exhaust plumes

Theoretical and experimental approaches to exhaust plume analysis are compared. A two-phase model is extended to include treatment of reacting gas chemistry, and thermodynamical modeling of the gaseous phase of the flow field is considered. The applicability of empirical data currently available to define particle drag coefficients, heat transfer coefficients, mean particle size, and particle size distributions is investigated. Experimental and analytical comparisons are presented for subscale solid rocket motors operating at three altitudes with attention to pitot total pressure and stagnation point heating rate measurements. The mathematical treatment input requirements are explained. The two-phase flow field solution adequately predicts gasdynamic properties in the inviscid portion of two-phase exhaust plumes. It is found that prediction of exhaust plume gas pressures requires an adequate model of flow field dynamics.

Tevepaugh, J. A.↗
NASA NTRS1978

Reaction diffusion in the NiCrAl and CoCrAl systems

The paper assesses the effect of overlay coating and substrate composition on the kinetics of coating depletion by interdiffusion. This is accomplished by examining the constitution, kinetics and activation energies for a series of diffusion couples primarily of the NiCrAl/Ni-10Cr or CoCrAl/Ni-10Cr type annealed at temperatures in the range 1000-1205 C for times up to 500 hr. A general procedure is developed for analyzing diffusion in multicomponent multiphase systems. It is shown that by introducing the concept of beta-source strength, which can be determined from appropriate phase diagrams, the Wagner solution for consumption of a second phase in a semiinfinite couple is successfully applied to the analysis of MCrAl couples. Thus, correlation of beta-recession rate constants with couple composition, total and diffusional activation energies, and interdiffusion coefficients are determined.

Levine, S. R.↗
DOE OSTI2021

Precipitate growth kinetics under inhomogeneous concentration fields using a phase-field model

We investigate precipitation dynamics in the presence of a local solute gradient using phase-field simulations. During the homogenization heat treatment of the solidified Inconel 718 alloy, high Nb concentration within the Laves phases or at the core of the secondary arms results in Nb diffusion into the γ matrix. The volume fraction and spatial distribution of precipitation during subsequent annealing can be controlled by tailoring the Nb concentration gradient in the matrix during homogenization. We use a surrogate Ni-Fe-Nb alloy for Inconel 718 to explore the growth dynamics of δ precipitates related to the local Nb concentration levels. The simulations indicate that in the presence of a Nb concentration gradient the growth rate of δ precipitates is higher than in a matrix of uniform average Nb concentration. The higher growth rate is a result of the higher local thermodynamic driving force at the interface between the solute-rich matrix and the δ interface. Here, we propose a phenomenological model to describe the diffusion-controlled growth kinetics of the δ phase under a solute concentration gradient.

36 MATERIALS SCIENCE↗
DOE OSTI2022

High Performance Computing to Quantify the Evolution of Microscopic Concentration Gradients During Flash Processing

During the Flash process, the cross section of a plain-carbon or a low-alloy steel is austenitized through rapid heating and transformed on rapid cooling to a predominantly martensite + bainite structure with small amounts of retained austenite. Unlike conventional heat treating, homogeneity is intentionally avoided during Flash processing of steels. The Flash process assembly consists of a pair of rolls that transfer the steel sheets through the heating and cooling stage of the thermal cycle. The initial microstructure of the steel consists of ferrite (body-centered cubic iron) + carbide ((Fe,X)mCn) mixture. The heating rate through the peak temperature is a function of temperature and reaches a peak of about 300-400°C/s and the cooling rate has a maximum value of 3,000-4,000°C/s. The on-heating phase transformations include carbide dissolution, austenite (face-centered cubic iron) nucleation and growth, and diffusion of carbon and other substitutional elements in the steel. The on-cooling phase transformations include formation of martensite (body-centered tetragonal phase containing supersaturated solute) and bainite (ferrite plates with or without fine carbides). In this project, the focus is on Fe-C-Cr steels that are currently Flash processed for armor applications. The modeling effort proposed here will help optimize the Flash thermal cycle for these low alloy steels to achieve the target performance, which is an ongoing effort at SFP Works. A significant feature of Flash processed Fe-C-Cr steels is the presence of scatter in the through-thickness in the sheet. The variability in hardness results from a variability in the bainite + martensite microstructure that is sensitive to the local chemical concentration of C and Cr. Such a chemical inhomogeneity is intentionally obtained in the Flash process. Although such a microstructural gradient is presumably responsible for the exceptional properties of the Flash processed steel, it is very important to quantify the gradients as a function of Flash variabilities in processing parameters and the input microstructure. Understanding the mechanistic pathway that leads to microstructural gradients could be ground-breaking and instrumental for achieving better process control and optimized microstructural state to meet application-specific strength-ductility requirements. Since the final microstructure depends on setting up precise solute concentration gradients through a rapid heating process, and transforming these regions into various phases, it is important to understand how small changes in steel chemistry, input microstructure (carbide size and distribution), and process variables (Flash thermal cycle) will impact the solute concentration gradients.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Elucidating the Microscale Behavior and Phase Separation Kinetics of Thermally Responsive Ionic Liquid–Water Mixtures

Thermally responsive ionic liquids (ILs) exhibit liquid-liquid phase separation into a water-rich (WR) and ionic-liquid-rich (ILR) phase when heated above a lower critical solution temperature (LCST). This phase behavior has been leveraged for applications ranging from forward osmosis (FO) desalination, where the IL acts as a draw solute, to refrigeration and dehumidification cycles, where the IL acts as a liquid desiccant. While significant effort has been devoted to characterizing the thermodynamic and thermophysical properties of LCST ILs, their phase separation kinetics have not been investigated. In this work, we describe the macroscale phase separation kinetics (phase separation time) by gleaning insight into the microscale colloidal behavior of aqueous mixtures of four different materials, P 4444 TFA (tetrabutylphosphonium-2,4-trifluoroacetate), P 4444 DMBS (tetrabutylphosphonium-2,4-dimethyl-benzenesulfonate), N 4444 Sal (tetrabutylammonium salicylate), and P 4444 Sal (tetrabutylphosphonium salicylate) as a function of IL concentration at a separation temperature of 70 °C. We report the discontinuous microscale size distributions for each material and correlate their theoretical settling velocities to experimental phase separation times. The results indicate that a simple Stokes' law model can predict the phase separation time within reasonable accuracy. Overall, this work lays the foundation for understanding the micro- to macroscale phase separation behavior and kinetics of LCST ILs for various water-energy applications.

LCST↗
DOE OSTI2022

Thin film combinatorial sputtering of Al-Ce alloys: Investigating the phase separation of as-deposited solid solutions and determining the coefficient of thermal expansion

Al x Ce 100–x thin films with a composition range of ~75.0 < x < 99.5 at% (36.5 < x < 97.5 wt%) were synthesized via combinatorial co-sputtering from an Al and an Al 50 Ce 50 target. The crystal structure, phase fraction, film morphology, electrical resistivity, and temperature-dependent coefficients of thermal expansion (CTE) are all correlated to the Al x Ce 100–x composition. The as-deposited films form a metastable solid-solution, and annealing leads to the formation of the thermodynamically stable two-phase system of Al and the α-Al 11 Ce 3 intermetallic. Temperature dependent x-ray diffraction (XRD) reveals that the two phases expand independently of one another, and the thin film Al temperature-dependent CTE is similar to bulk Al. The thin film Al 11 Ce 3 intermetallic phase has a nearly constant CTE of ~1.5 × 10 –5 /°C within the temperature range studied (25–550 °C). To confirm the thin film Al 11 Ce 3 results, bulk stoichiometric Al 11 Ce 3 and +/- 1 wt% Ce samples were prepared and the CTE of each was measured with the same conditions. A Rietveld analysis of the bulk data enabled an estimation of the CTE in each of the 3 orthorhombic lattice parameters, which displayed anisotropic behavior. The thin film and bulk CTE measurements were in very good agreement. Estimations of the temperature dependent CTE of the two-phase alloys are made via the Reuss and Voigt models. Finally, by demonstrating the efficacy of the approach, more complex multi-component rapid materials discovery of low CTE Al-alloys can be pursued via the combinatorial thin film synthesis and XRD measurement.

36 MATERIALS SCIENCE↗
NASA NTRS1977

Effects of heat treating PM Rene' 95 slightly below the gamma-prime solvus

An investigation was performed on As-HIP Rene' 95 to obtain additional information on the variation of the amount of gamma-prime with solutioning temperatures near the gamma-prime solvus temperature and the resulting effects on tensile and stress rupture strengths of As-HIP Rene' 95. The amount of gamma-prime phase was found to increase at a rate of about 0.5% per degree Celsius as the temperature decreased from the solvus temperature to about 50 C below the gamma-prime solvus temperature. The change in the amount of gamma-prime phase with decreasing solutioning temperature was observed to be primarily associated with decreasing solubilities of Al+Ti+Nb and increasing solubility of Cr in the gamma phase. For As-HIP Rene' 95 solutioned at either 1107 or 1135 C and subsequently water-quenched and double aged for 4 hours at 815 C followed by 24 hours at 650 C, the higher solution temperature resulted in significantly greater yield strengths at room temperature and 650 C as well as a greater room-temperature ultimate strength. Also, longer stress rupture lives at 650 C were associated with the higher solution temperature.

Dreshfield, R. L.↗