SEARCH · Search NASA
Results for “study”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
High resolution X-ray and NMR structural study of human T-cell immunoglobulin and mucin domain containing protein-3
Explore the source record for details and available documents.
Symmetry breaking charge transfer as a means to study electron transfer with no driving force
Symmetry breaking charge transfer (SBCT) is a process where a symmetrically disposed pair of identical chromophores forms a charge transfer excited state with the hole and electron on different chromophores, i.e. chr–chr + hν → chr + –chr – . Herein we explore this process in two dipyrrin-based bichromophoric systems. One of these bisdipyrrins involved a pair of BODIPY chromophores linked by a single bond at their meso-positions (compound 1) and the other involved two dipyrrin ligands coordinated in a tetrahedral geometry at the Zn 2+ ion (compound 2). Both compounds show rapid SBCT in polar solvents and only dipyrrin based emission in nonpolar solvents, the latter arising from a dipyrrin localized excited sate (LE). By “tuning” the solvent polarity the equilibrium between the LE and SBCT states can be shifted to favor either state. Ultrafast transient absorption spectroscopy (TA) was used to probe the kinetics of the charge transfer for 2 in solvents where the electron transfer is endergonic, exergonic and has a ΔG close to zero. Our TA derived rates were used to predict fluorescence efficiencies in each of the different solvent systems and showed a good correspondence to measured values. Detailed density functional theory (DFT) and time dependent DFT were used to model the ground states as well as the LE and SBCT states of 1 and 2, in both polar and nonpolar media. Lastly, the ground and LE excited states show small dipole moments, while the SBCT states show dipole moments of 16.4 and 20.3 D for 1 and 2, respectively.
A comparative study of pomegranate Sb@C yolk–shell microspheres as Li and Na-ion battery anodes
A high-packing density pomegranate Sb@C yolk–shell structure has been developed as high-performance anodes for lithium-ion and sodium-ion batteries.
A comparative study of secondary depolymerization methods on oxidized lignins
DDQ oxidized lignins were used as substrates to assess the effectiveness of secondary depolymerization methods for the production of aromatics.
Annulated bacteriochlorins for near-infrared photophysical studies
Bacteriochlorins with phenaleno or benzo annulation absorb at 913 or 1033 nm and exhibit excited-state lifetimes of 150 or 7 ps, suggesting applications in photoacoustic imaging.
Experimental considerations to study Li-excess disordered rock salt cathode materials
Explore the source record for details and available documents.
Structural and proton conductivity studies of fibrous π-Ti 2 O(PO 4 ) 2 ·2H 2 O: application in chitosan-based composite membranes
The structure of π-Ti 2 O(PO 4 ) 2 ·2H 2 O was determined by the SR-PXRD method. The proton conductivity of chitosan/π-TiP membranes reached 4.5 × 10 −3 S cm −1 at 95%-RH.
An energy-optimization method to study gel-swelling in confinement
Using our open-source programming environment Morpho, an energy-optimization method is developed to compute equilibrium shapes of an arbitrarily confined swollen hydrogel. The internal strains and contact forces are measured, probing its mechanics.
Beyond conventional batteries: a review on semi-solid and redox targeting flow batteries-LiFePO{sub 4} as a case study.
Clean and sustainable energy is becoming increasingly crucial to tackle the current energy crisis. However, the intermittent nature of renewable energy sources presents a challenge for their effective implementation. Redox flow batteries (RFBs) have emerged as a promising solution to this problem, as they can help enhance the stability of grid networks and promote the use of renewable energy sources. RFBs are highly modular and scalable systems that can be customized to meet the power and energy requirements of different renewable energy plants. Moreover, they offer several advantages over conventional battery technologies, including cost and safety concerns. However, conventional RFBs have limited energy densities due to the low solubility of their active species in electrolyte. To overcome this limitation, semi-solid (SSRFBs) and redox targeting (RTFBs) flow batteries have been proposed. These systems feature high concentrations of active species and impressive energy densities, making them highly attractive for renewable energy applications. LiFePO4 (LFP) is a highly promising active material for semi-solid and targeting flow batteries. One of the key advantages of LFP is its low raw materials cost, as it is composed of Earth-abundant elements such as iron and phosphorus. This makes it an attractive option for large-scale battery production. The recent developments in SSRFBs and RTFBs using LFP as catholyte hold great promise for the future of sustainable energy storage. The combination of LFP's low cost, safety, durability, and high energy density with the modularity and scalability of flow battery systems make for a compelling solution to the challenges of intermittent renewable energy sources. Ongoing research and development in this area will likely yield even further improvements in the performance and efficiency of LFP-based flow batteries, opening exciting new possibilities for sustainable energy storage.
Feasibility study of a compact heavy ion source for investigation of laboratory magnetospheric plasma
We are developing a laser ion source to provide a high brightness multi-charged heavy ion beam as a part of the heavy ion beam probe system, which will be used to diagnose plasma potential in the Ring Trap 1 device at the University of Tokyo. As a probe beam, Nb2+ was selected, and a detailed laser irradiation condition was explored. It was found that the laser power density of 1.2 × 109 W/cm2 gives the maximum particle number of Nb2+ per laser energy from a niobium foil target. Essential ablation plasma parameters to design the laser ion source were also obtained. The expected beam current was more than 12 mA/cm2, with a pulse width of 3.1 µs at 200 mm away from the target.
Performance of pumped counterflow virtual impactors to study aerosol interactions with laboratory generated warm clouds
Pumped Counterflow Virtual Impactors (PCVI) are designed to separate aerosols based on aerodynamic diameter, which is particularly useful for isolating cloud droplets and ice crystals from smaller particles. However, the PCVI transmission efficiency (TE) values reported in the literature show considerable variability, and little information is available on the TEs for cloud liquid droplets. Here, we determined the optimal flow conditions for PCVI sampling for different activation ratios from the MTU Pi-cloud chamber, highlighting the conditions that maximize droplet residual sampling while minimizing interstitial transmission. Even for a lower limit cloud activation ratio = 1:10, an add flow of 1.5 LPM achieves a residual fraction greater than 0.80, with a droplet TE of ∼15% for typical Pi-Chamber droplets with diameters between 3.5 to 10 µm. This framework can be adapted for field cloud measurements based on the cloud conditions of interest. TE for cloud droplets under flow conditions at which ∼99% of the unactivated submicron particles were removed was substantially lower between 8 and 16% than for supermicron dry particles (∼30 to 40% for 3 µm polystyrene latex spheres). In addition, we conducted a comparison of the performances of three similar PCVI units to assess repeatability for dry aerosols and cloud droplets. All three PCVIs performed similarly in rejecting submicron particles smaller than the desired cutoff diameter. One of the units showed lower TEs due to a misalignment of the internal orifice. We discuss a procedure that improved alignment and performance.
Instrumentation for In situ/Operando X-ray Scattering Studies of Polymer Additive Manufacturing Processes
With new opportunities and challenges from additive manufacturing (AM), novel characterization approaches are needed to realize reliable and industry-transferrable material systems and processes. The Complex Scattering Program at the National Synchrotron Light Source II (NSLS-II), a Department of Energy (DOE) Office of Science User Research Facility located at Brookhaven National Laboratory, has capabilities on three beamlines to support in situ and operando soft material additive manufacturing measurements. In this article, we describe some of the additive manufacturing capabilities that have been implemented on these beamlines, including in-line 3D printers for Continuous-flow Direct Writing (CDW), Fused Filament Fabrication (FFF) printing, and an instrument for Electrospray Deposition (ESD). We also describe a development program in autonomous experimentation that will be critical for addressing the complexity involved in optimizing additive manufacturing processes and materials.
A Case Study on Pathogen Transport, Deposition, Evaporation and Transmission: Linking High-Fidelity Computational Fluid Dynamics Simulations to Probability of Infection
A high-fidelity, low-Mach computational fluid dynamics simulation tool that includes evaporating droplets and variable-density turbulent flow coupling is well-suited to ascertain transmission probability and supports risk mitigation methods development for airborne infectious diseases such as COVID-19. A multi-physics large-eddy simulation-based paradigm is used to explore droplet and aerosol pathogen transport from a synthetic cough emanating from a kneeling humanoid. For an outdoor configuration that mimics the recent open-space social distance strategy of San Francisco, maximum primary droplet deposition distances are shown to approach 8.1 m in a moderate wind configuration with the aerosol plume transported in excess of 15 m. In quiescent conditions, the aerosol plume extends to approximately 4 m before the emanating pulsed jet becomes neutrally buoyant. A dose–response model, which is based on previous SARS coronavirus (SARS-CoV) data, is exercised on the high-fidelity aerosol transport database to establish relative risk at eighteen virtual receptor probe locations.
Infrared studies of gas phase and surface processes of the enhancement of catalytic methane decomposition by low temperature plasma
Catalyst enhancement by atmospheric pressure plasma is a recently emerging field of research that embodies a complex system of reactive species and how they interact with surfaces. In this work we use an atmospheric pressure plasma jet integrated with a nickel on Al 2 O 3 /SiO 2 support catalyst material to decompose methane gas by partial oxidation reaction. We use Fourier-transform Infrared spectroscopy (FTIR) analysis of the gas phase post reaction to measure the loss of methane and the production of CO, CO 2 , and H 2 O and diffuse reflectance Fourier-transform Infrared spectroscopy (DRIFTs) in situ analysis of the catalyst surface as a function of both catalyst temperature and plasma operating parameters. We find reduction of methane by both plasma alone, catalyst alone, and an increase when both plasma and catalyst were simultaneously used. The production of CO appears to be due primarily to the plasma source as it only appears above 2.5 W plasma dissipated power and decreases as catalyst temperature increases. CO 2 production is enhanced by having the catalyst at high temperature and H 2 O production depends on both plasma power and temperature. Using DRIFTs we find that both heating and plasma treatment remove absorbed water on the surface of the catalyst. Plasma treatment alone however leads to the formation of CO and another IR spectral feature at 1590 cm -1 , which may be attributed to carboxylate groups, bonded to the catalyst surface. These species exhibit a regime of plasma treatment where they are formed on the surface and where they are significantly removed from the catalyst surface. We see the formation of a new spectral feature at 995 cm -1 and discuss the behavior and possible origins of this feature. Furthermore, this research highlights the potential for plasma regeneration of catalyst materials as well as showing enhancement of the catalytic behavior under low temperature plasma treatment.
Case Studies of a Nuclear Forensics Examination
Explore the source record for details and available documents.