Search NASA⌕ Search

SEARCH · Search NASA

Results for “substrate specificity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Myco-Architecture off Planet: Growing Surface Structures at Destination

Our work focused on filling major select key technical knowledge gaps, and technical aspects to be addressed in a Phase II proposal were identified such as the secretion of glues or plastics by the fungi or bacteria to form biocomposites. Specifically, we raised the technical TRL by assessing the growth of in-house mycelial-producing strains on potential food substrates and analyzed the advantages and disadvantages to their use off planet. Growth of the mycelia on sawdust and powdered nutrients including dried, powdered algae, was used as a baseline. We measured growth as a function of temperature, tested the relevant material properties of the mycelia products produced, and measured the mass of input and output volume for production per volume of material. Mycotecture was produced in a bag simulating the proposed mission implementation. Post-production such as heat treatment (as is done with terrestrial mycotecture)was assessed.The material properties of the dried, frozen and baked mycelial outputs included density, strength,thermal insulation and flame retardation. Tensile/compression testing on biocomposite material specimens was performed to obtain three-dimensional elastic constants, as well as to examine deformation and fracture behavior. These mechanical tests were performed on both dormant and activated samples to understand the evolution of the structural material. In addition, experimental data obtained from the mechanical testing was used to build a failure prediction model that accounts for material anisotropy. This aided in future structural design through a quantitative understanding of the mechanical limits of the material. To examine the texture, defects, fracture surfaces of the material, high-resolution microstructural imaging was utilized before and after the mechanical tests. This microstructural analysis informed us about the macro-structural behavior and influenced structural design. Thermal decomposition analysis was also performed tounderstand the thermal limits.

Biocomposites↗
DOE OSTI2020

Controlling Metal–Organic Framework/ZnO Heterostructure Kinetics through Selective Ligand Binding to ZnO Surface Steps

Metal–organic framework (MOF) heterostructures exhibit unique properties beyond those of individual components, but their design requires an understanding of energetic and kinetic controls at MOF–substrate interfaces. Although the structural relationship has been widely used in heterostructure design, it overlooks the interplay between the organic ligand and the substrate which controls the kinetics and energetics of growth of the final structure. In this study, we used zeolitic imidazolate frameworks (ZIF-8) on ZnO as a model system to evaluate this interplay via in situ monitoring and simulations. Our results demonstrate multiple roles of the 2-methyl-imidazole (2-MIM) ligand as “dissolution-promoter”, “step-pinner”, and “terrace-binder” on the ZnO (001) face and “dissolution-promoter” and “terrace-binder” on the ZnO (100) face. Through these multiple face-specific roles, 2-MIM modulates ZnO dissolution kinetics and, hence, the Zn 2+ release rate, tuning local supersaturations that dictating the characteristic ZIF-8 crystallization kinetics on different substrate faces. The critical thickness for transition from 2D to 3D growth is dictated by competition between interfacial and strain energies. The atomic-scale mechanism of the coupled substrate dissolution and MOF growth, mediated by selective linker–substrate binding, furnishes a new synthesis pathway for other complex heterostructures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Integration of Omics into a New Comprehensive Rate Law for Competitive Terminal Electron-Accepting Processes in Reactive Transport Models: Application to N, Fe, S, and Contaminant Transformations in Stream and Wetland Sediments

Surface waters represent important sources of alternate energy and drinking water in the United States, and characterizing the biogeochemical processes that affect surface water quality is relevant to the DOE-BER mission. Sediment biogeochemical processes regulate the release of carbon (C), nutrients, and contaminants to surface waters and thus influence water quality. Sediment biogeochemical processes are dynamic and affected by the deposition and remobilization of solid material and changes in environmental conditions driven by water discharge variations. Wetlands are important natural filters of surface waters which may either trap, metabolize, or mobilize nutrients and contaminants. Despite their importance, biogeochemical processes regulating nutrient and contaminant release and C transformation in stream and wetland sediments cannot be predicted accurately by current mathematical models. These reactive transport models largely rely on detectable changes in geochemical conditions to activate metabolic processes, do not accurately account for the competition between microbial processes, and poorly constrain effects of hydrological perturbations on biogeochemical processes. In this BER-SBR exploratory project, metagenomic and geochemical signatures were combined to identify microbially-mediated redox processes in anaerobic stream and wetland sediments from the Savannah River Site (SRS, ANL SFA) and East Fork Poplar Creek (EFPC, ORNL SFA) that play important roles in C, uranium (U), and mercury (Hg) transformations. In addition, sediment incubations were conducted to examine the competition between anaerobic respiration processes Finally, new rate laws were developed for reactive transport models that rely on complementary metagenomic and geochemical signatures to identify the underlying anaerobic microbial processes in stream and wetland sediments, describe the competition between the dominant metabolic processes involved in nutrient release and U and Hg mobilization, and more accurately quantify carbon transformation and the response of microbial processes to changes in redox conditions associated with hydrological forcing. These rate laws were optimized in batch reactors with SRS wetland sediments, where iron and sulfate reduction dominate. Anaerobic carbon remineralization processes followed the expected thermodynamic sequence of microbial respiration with depth in both sediments, except that geochemical signals indicated that sulfate reduction was inactive in EFPC sediments and moderate in SRS wetland sediments. Estimates indicated that microbial iron reduction contributed to at least half of the production of reduced iron in these sediments. Incubations demonstrated that nitrate reduction, denitrification, and dissimilatory nitrate reduction to ammonium were active in the natural EFPC sediment and activated upon nitrate amendment in these nitrate-rich sediments. In turn, these processes were outcompeted by the addition of either iron oxides or sulfate as alternative terminal electron acceptors. Although geochemical products of sulfate reduction were not detected in the incubations, the abundance of sulfate reduction genes increased with depth in the sediment and was equally more pronounced in treatments amended with either iron oxides or sulfate. Simultaneously, anaerobic sulfide oxidizing bacteria coupling sulfide oxidation to DNRA (and not conventional denitrification) were apparently enriched over time, regardless of the treatments. These findings indicate that sulfate reduction is important in freshwater stream sediments and probably catalyzed by a cryptic sulfur cycle involving nitrogen species, in which the sulfur products from sulfate reduction are immediately removed by side reactions and not detectable by geochemical measurements alone. Similar experiments in SRS sediments, however, demonstrated little interaction between nitrogen and sulfur cycling microorganisms. Sulfate reduction was impacted by the addition of more thermodynamically favorable electron acceptors, suggesting either that iron-reducing microorganisms outcompeted sulfate-reducing microorganisms for organic substrate, depleting the stock of electron donor available for sulfate reduction, or that the cryptic sulfur cycle was shunted by the precipitation of FeS generated as a result of the abiotic reduction of iron oxides by dissolved sulfide. A diagnostic modeling exercise was conducted to further investigate the competition between terminal electron accepting processes. As conventional kinetic models typically do not account for cryptic cycles and used inaccurate formulations to describe competition between microbial communities, new metabolic rate laws were developed that explicitly express the electron acceptor-specific enzyme of each energetically favorable metabolic process based on gene abundance detected in the incubations. The model was tested with the sediment slurry incubation data to determine whether substrate competition could explain the decrease in sulfate reduction observed in the presence of iron oxide competitor. The model was able to reproduce geochemical concentrations really well in each treatment once the model was calibrated with the unamended control, suggesting that microbial competition was indeed driven by thermodynamic considerations. Overall, carbon remineralization processes and rates will be reproduced much more realistically with the new metabolic rate laws.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Enhanced Spatial Proteomics and Metabolomics from a Single Tissue Section Using MALDI-MSI and LCM-microPOTS Platforms

Spatially resolved mass spectrometry (MS)-based multi-omics workflows are becoming more utilized for revealing the complex biology that occurs within tissues. However, these approaches commonly require multiple independent tissue sections to analyze the metabolite and protein compositions of these samples. This poses a significant challenge in preserving cell- or region-specific molecular fidelity, as variations between tissue sections can compromise the accurate correlation of molecular data. Here, in this study, we developed workflows for comprehensive multi-omics profiling from a single tissue section (STS) using different MS modalities. We enhanced the functionality of an electrically insulated substrate by employing metal-assisted approaches that enabled both MS-based untargeted spatial metabolomics and proteomics from STS. This allowed metabolite imaging using matrix-assisted laser desorption/ionization-MS imaging (MALDI-MSI), without compromising it for subsequent proteome profiling with laser capture microdissection (LCM)-based technology. Specifically, implementing copper tape as a backing for polyethylene naphthalate (PEN) slides enabled the detection of >140 metabolites across a poplar root tissue section using MALDI-trapped ion mobility spectrometry time of flight (timsTOF)-MS. Afterwards, we detected 6,571 unique proteins from two distinct root regions by leveraging LCM technology coupled to our microdroplet based sample preparation approach. We also developed an alternative workflow utilizing gold-coated PEN substrates for imaging with MALDI-Fourier-transform ion cyclotron resonance (FTICR)-MS, which permitted the profiling of >170 metabolites and the identification of 6,542 unique proteins across a single poplar root tissue section. These results were comparable to using each assay independently without modifications. These approaches offer new opportunities for high-resolution molecular profiling of multiple omics-levels across biological tissues.

Veličković, Marija [Pacific Northwest National Lab↗
DOE OSTI2024

An efficient construction of nano-interfaces for excellent coking tolerance of cermet anodes

Solid oxide fuel cells (SOFCs) are promising energy conversion devices for the effective and convenient utilization of hydrocarbons (for example, methane) to electricity. However, the development of direct methane SOFCs is primarily hindered by the poor coking tolerance of the state-of-the-art Ni-based cermet anodes. Herein, we efficiently construct nano-interfaces in the anode by infiltrating a Ni 0.6 Y 0.064 Zr 0.336 O 2-δ (NYZ) catalyst onto the traditional Ni-based cermet anode to effectively enhance the coking tolerance. After being reduced in H 2 , Ni and Y 0.16 Zr 0.84 O 2-δ (YSZ) nanoparticles (NPs) are in situ formed on the surface of the Ni-YSZ substrate. The roughened anode demonstrates significantly improved fuel oxidation activity and coking tolerance, due likely to the formation of nano-interfaces. Specifically, when applied in the Ni-YSZ-based anode-supported SOFCs, a high peak power density of 1.785 W cm –2 and a stable operation of ~ 240 h with no observable degradation is achieved at 750 °C in nearly dry methane (3% H 2 O). Finally, a density functional theory study suggests that the excellent coking tolerance is attributed to the formation of OH species on Ni/YSZ nano-interfaces, which would further interact with intermediate carbon species to generate COH intermediates.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2020

Measuring the impact ionization and charge trapping probabilities in SuperCDMS HVeV phonon sensing detectors

A 0.93 g 1×1×0.4 cm 3 SuperCDMS silicon HVeV detector operated at 30 mK was illuminated by 1.91 eV photons using a room temperature pulsed laser coupled to the cryostat via fiber optic. In this work, the detector’s response under a variety of specific operating conditions was used to study the detector leakage current, charge trapping, and impact ionization in the high-purity Si substrate. The measured probabilities for a charge carrier in the detector to undergo charge trapping (0.713±0.093%) or cause impact ionization (1.576±0.110%) were found to be nearly independent of bias polarity and charge-carrier type (electron or hole) for substrate biases of ±140 V.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS1974

Radiation hardening of MOS devices by boron

A technique is described for radiation hardening of MOS devices and specifically for stabilizing the gate threshold potential at room temperature of a radiation subjected MOS field-effect device with a semiconductor substrate, an insulating layer of oxide on the substrate, and a gate electrode disposed on the insulating layer. The boron is introduced within a layer of the oxide of about 100 A-300 A thickness immediately adjacent the semiconductor-insulator interface. The concentration of boron in the oxide layer is preferably maintained on the order of 10 to the 18th power atoms/cu cm. The technique serves to reduce and substantially annihilate radiation induced positive gate charge accumulations.

Danchenko, V.↗
NASA NTRS1990

Peeled film GaAs solar cell development

Thin-film, single-crystal gallium arsenide (GaAs) solar cells could exhibit a specific power approaching 700 W/kg including coverglass. A simple process has been described whereby epitaxial GaAs layers are peeled from a reusable substrate. This process takes advantage of the extreme selectivity of the etching rate of aluminum arsenide (AlAs) over GaAs in dilute hydrofluoric acid. The feasibility of using the peeled film technique to fabricate high-efficiency, low-mass GaAs solar cells is presently demonstrated. A peeled film GaAs solar cell was successfully produced. The device, although fractured and missing the aluminum gallium arsenide window and antireflective coating, had a Voc of 874 mV and a fill factor of 68 percent under AM0 illumination.

Wilt, D. M.↗
NASA NTRS1993

Workshop on Heteroepitaxial InP Solar Cells

In a generic sense, the justification for any sort of InP solar cell research applies, i.e. to take advantage of the inherently high radiation resistance and efficiency of InP solar cells. To be more specific, the approach is justified by its potential for significant cost reduction and the availability of greatly increased cell area afforded by substrates such as Si and Ge. The use of substrates, such as the latter two, would result in increased ruggedness, ease of handling, and improved manufacturability. The use of more rugged substrates would lead to a greatly increased capability for cell thinning leading to the desirable feature of reduced array weight.

Weinberg, I.↗
NASA NTRS2005

MOVPE of GaSb/InGaAsSb Multilayers and Fabrication of Dual Band Photodetectors

Metalorganic vapor phase epitaxy (MOVPE) of GaSb/InGaAsSb multilayer thin films and fabrication of bias-selectable dual band photodetectors are reported. For the dual band photodetectors the short wavelength detector, or the upper p- GaSb/n-GaSb junction photodiode, is placed optically ahead of the long wavelength one, or the lower photodiode. The latter is based on latticed-matched In0.13Ga0.87As0.11Sb0.89 with bandgap near 0.6 eV. Specifically, high quality multilayer thin films are grown sequentially from top to bottom as p+-GaSb/p-GaSb/n-GaSb/n-InGaAsSb/p-InGaAsSb/p-GaSb on undoped p-type GaSb substrate, and as n-GaSb/p-GaSb/p-InGaAsSb/n-InGaAsSb/n-GaSb on Te-doped n-type GaSb substrate respectively. The multilayer thin films are characterized by optical microscope, atomic force microscope (AFM), electron microprobe analyses etc. The photodiode mesa steps are patterned by photolithography with wet chemical etching and the front metallization is carried out by e-beam evaporation with Pd/Ge/Au/Ti/Au to give ohmic contact on both n- and p-type Sb based layer surfaces. Dark I-V measurements show typical diode behavior for both the upper and lower photodiodes. The photoresponsivity measurements indicate that both the upper and lower photodiodes can sense the infrared illumination corresponding to their cutoff wavelengths respectively, comparable with the simulation results. More work is underway to bring the long wavelength band to the medium infrared wavelength region near 4 micrometers.

Xiao, Ye-Gao↗
NASA NTRS1998

A Dual-Band Dual-Polarized Array for Spaceborne SAR

Future synthetic aperture radar antennas will be significantly more sophisticated than their earlier counterparts, requiring enhanced electrical capabilities such as operation at multiple frequencies with multiple polarization ability, as well as desirable non-electrical features such as light weight, easy and reliable deployability, and low cost. The present paper describes the results of a prototype SAR array developed with these considerations in mind. This paper will describe the development of a dual-frequency array operating at L and C bands, with dual linear polarization capability at both bands. Unlike most earlier dual-band arrays, this array shares the same radiating aperture for both bands and both polarizations, resulting the smallest possible aperture area for a given gain specification. A critical constraint in this project was a requirement for an extremely light weight package, leading to the use of foam substrates with thin dielectric membranes for metalizations of the radiating elements and feed networks.

Pozar, David M.↗
NASA NTRS2014

Wireless Open-Circuit In-Plane Strain and Displacement Sensor Requiring No Electrical Connections

A wireless in-plane strain and displacement sensor includes an electrical conductor fixedly coupled to a substrate subject to strain conditions. The electrical conductor is shaped between its ends for storage of an electric field and a magnetic field, and remains electrically unconnected to define an unconnected open-circuit having inductance and capacitance. In the presence of a time-varying magnetic field, the electrical conductor so-shaped resonates to generate harmonic electric and magnetic field responses. The sensor also includes at least one electrically unconnected electrode having an end and a free portion extending from the end thereof. The end of each electrode is fixedly coupled to the substrate and the free portion thereof remains unencumbered and spaced apart from a portion of the electrical conductor so-shaped. More specifically, at least some of the free portion is disposed at a location lying within the magnetic field response generated by the electrical conductor. A motion guidance structure is slidingly engaged with each electrode's free portion in order to maintain each free portion parallel to the electrical conductor so-shaped.

Woodard, Stanley E.↗
NASA NTRS2026

NASA Weather Balloon Demonstration of an Additively Manufactured Antenna

Additive manufacturing (AM) enables low-cost, lightweight, and geometrically flexible antennas for rapid deployment missions. This work reports a left-hand circularly polarized magneto-electric dipole printed on a Radix dielectric with inkjet silver metallization and demonstrated as a process replacement for NASA weather-balloon RF hardware. By combining substrate fabrication and metallization, AM provides value for unrecoverable or field-replaceable systems. A physics based verification workflow links AM-specific material behavior to electromagnetic performance and yields bounded total, radiation, and mismatch efficiencies. Standard surface-impedance and roughness models failed to reproduce the frequency-dependent radiation loss observed in printed inks, underscoring the need for AM-specific conductor parameterization. Mission testing confirmed TDRSS link closure from NASA’s Columbia Scientific Balloon Facility and validated a repeatable print–measure–fly workflow for bounding RF performance and qualifying AM antennas for field use.

Peter Moschetti↗
NASA NTRSDate not supplied

NASA Weather Balloon Demonstration of an Additively Manufactured Antenna

Additive manufacturing (AM) enables low-cost, lightweight, and geometrically flexible antennas for rapid deployment missions. This work reports a left-hand circularly polarized magneto-electric dipole printed on a Radix dielectric with inkjet silver metallization and demonstrated as a process replacement for NASA weather-balloon RF hardware. By combining substrate fabrication and metallization, AM provides value for unrecoverable or field-replaceable systems. A physics based verification workflow links AM-specific material behavior to electromagnetic performance and yields bounded total, radiation, and mismatch efficiencies. Standard surface-impedance and roughness models failed to reproduce the frequency-dependent radiation loss observed in printed inks, underscoring the need for AM-specific conductor parameterization. Mission testing confirmed TDRSS link closure from NASA’s Columbia Scientific Balloon Facility and validated a repeatable print–measure–fly workflow for bounding RF performance and qualifying AM antennas for field use.

Peter Moschetti↗
NASA NTRS2007

Sources of and Remedies for Removing Unwanted Reflections in Millimeter Wave Images of Complex SOFI-Covered Structures

In the recent years, continuous-wave (CW) near-field and lens-focused millimeter wave imaging systems have been effectively. used to demonstrate their utility for producing high-resolution images of metallic structures covered with spray on foam insulation (SOFI) such as the space shuttle external tank. These systems have produced images with a spatial resolution of approximately 2 mm at a frequency of 150 GHz, and can easily interrogate thin as well as thick SOFI (> 9") enabling detection and evaluation of flaws such as voids, disbands, delaminations and corrosion. These systems are relatively simple, inexpensive, easy-to-use, require little to no signal processing of the raw data, on-site friendly, real-time and small. However, for some specific structures a certain interference pattern may be superimposed on the produced images. Generally, this occurs when the SOFI surface is at a relatively significant angle with respect to the surface of the substrate (or other sub-structures) on which it is sprayed. Consequently, the reflection from the surface of the SOFI and that from the substrate (or sub-structure) coherently combine into an interference pattern as the SOFI surface is scanned. There are methods by which the influence of this unwanted interference can be reduced, such as the incorporation of an incidence angle and the proper use of signal polarization. This paper presents the basics of this problem and describes the use of the methods for reducing this unwanted influence through several specific examples. A discussion on how the use of a swept-frequency or pulsed method may also alleviate this problem is also presented.

Khakovsky, S.↗
NASA NTRS2023

3D Printed Substrate

In preparation for long-term, manned, deep space missions, NASA requires a sustainable system for crop and food production. This system has a variety of benefits, including a fresh food supply, improvements in air quality, a lower need to resupply and psychological benefits for the gardeners. Specifically, NASA is attempting to improve and iterate their Vegetable Production System (VEGGIE), a plant growth unit currently aboard the International Space Station (ISS). The VEGGIE unit is highly dependent on a variety of factors, including passive water delivery, growth lights, rooting pillows and cabin conditions. While previous teams have improved and redesigned water reservoirs, the primary objective of the project was to create a new substrate unit to replace the current rooting pillow design. The current design consists of an electrostatic bag filled with arcillite and a slow-release fertilizer pellet. The prototype design retains the fertilizer pellet for nutrient consistency, however the outer bag and arcillite fillings have been replaced with a 3D printed lattice block. This lattice block has several key points that allow it to function in similar ways to the current design: 1. The lattice planes are porous, with each pore offset such that the overall porosity is the same as the arcillite filling. 2. The block demonstrates a wicking nature and is able to pull water upwards towards the roots. This minimizes time needed to integrate with the existing water reservoir. 3. The filament used is highly flexible and is able to pull apart to accommodate root growth. 4. The lattice planes are connected by microfibers left behind from the printing process. These fibers provide support for the growing roots and keep the lattice planes properly aligned. The substrate block design seeks to reduce the payload costs by being entirely 3D printed. While filament would still need to be provided to the ISS, it is far less expensive than shipping arcillite due to the significantly lower weight. The final design has iterated the lattice plane concept and utilizes vertically placed planes with pores running parallel to the water reservoir. This design has reliably shown water uptake and retention and has been successful in growing multiple romaine lettuce plants. Future work should include further growth testing using multiple plant species, compost and reusability testing, food safety testing and microgravity growth testing.

Affan Bhutta↗
DOE OSTI2021

Copper Electrode on Flexible Substrate by Intense Pulsed Light Sintering of Microsized Copper Particles

Metal electrodes deposited in a grid pattern onto flexible polymer substrates have been shown to be a viable alternative to replace indium tin oxide (ITO) as the transparent anode for organic photovoltaics. copper may be a better alternative in terms of cost and stability for large area low-cost solar modules, specifically on roll-to-roll platforms. These customized electrode patterns can be fabricated from copper nanoparticles through various printing techniques applicable to solution phase processing. The Intense Pulsed Light (IPL) technique has been used to sinter copper nanoparticles (~100nm) to fabricate conductive copper electrodes on flexible polymer substrates. However, compared to nanosized (~100 nm) copper particles, microsized (~2 um) copper is much cheaper. In this work, microsized (~2 um) copper is used to produce high conductive copper inks. The conductivity of the print can be adjusted through the use of surfactant. IPL sintering was optimized to obtain high conductivity copper films. In conclusion, several microscopic and electrical spectroscopic characterization techniques such as scanning electron microscopy (SEM), x-ray diffraction (XRD), 4-point probe resistivity measurements were employed to characterize the copper electrodes.

14 SOLAR ENERGY↗
DOE OSTI2024

Commentary: Duckweeds as model organisms for metabolic studies

Duckweeds have many practical applications, for example in human nutrition, as animal feed, in the production of bioplastics or vaccines, and phytoremediation (Acosta et al., 2021). Under most conditions, they reproduce asexually which provides genetically uniform material with predictable patterns of growth that make them ideal as sentinel organisms for phytotoxicity testing (Park et al., 2021). Asexual growth also results in high biomass production which makes duckweeds promising candidates as biofuel feedstocks (Acosta et al., 2021; Liang et al., 2023). In addition, duckweed species like Lemna minor and Spirodela polyrhiza are also reemerging as model organisms in plant biology as high-quality full genome assemblies and other genomic resources become available (Chang et al., 2016; Acosta et al., 2021). We argue that duckweed species are particularly of interest for the study of primary plant metabolism. Primary metabolism concerns the part of metabolism that is directly involved in the growth and development of plants, and which tends to be highly conserved among plant species. What makes duckweeds particularly attractive is that when grown on liquid media more precise control of physiological conditions can be attained relative to growth of plants in soil. Also, due to their relatively simple anatomical structure and asexual reproduction of fronds by budding, precise characterization of the physiological state under study is possible through one simple metric, i.e., the specific growth rate (rate of dry weight increase per existing dry weight), which can be incorporated relatively easily into metabolic models. This is not possible for land plants, such as Arabidopsis, because over the course of their life cycle, they go through multiple growth stages and phases of anatomical differentiation, which are much more complex to quantify. Furthermore, duckweeds can grow on organic substrates under heterotrophic or photomixotrophic conditions that facilitate isotope tracer studies. For example, in a previous study on duckweed by one of the authors, Lemna gibba (L). was grown on glucose with a position-specific 13 C-label that can be detected and resolved by Mass Spectrometry or Nuclear Magnetic Resonance spectrometry. Using this approach, the 13 C-label was traced into biomass compounds formed from glucose, particularly isoprenoid compounds. Some of the resulting labeling patterns were in apparent disagreement with predictions based on known metabolic pathways for the biosynthesis of isopentenyl pyrophosphate, the universal building block for isoprenoids, (Lichtenthaler et al., 1997). From this data it was deduced that isoprenoid compounds such as carotenoids and isoprenoid chains of phytol and plastoquinone, synthesized in the chloroplast, are produced via a previously unreported plant metabolic pathway, now known as the methylerythitol/deoxyxylulose-5-phosphate pathway (Lichtenthaler et al., 1997).

59 BASIC BIOLOGICAL SCIENCES↗