Search NASA⌕ Search

SEARCH · Search NASA

Results for “AMORPHIZATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Atomic structure of amorphous and crystallized Ge{sub 15}Sb{sub 85}

Ge{sub 15}Sb{sub 85} is a promising material for phase-change memory applications owing to its very short crystallization times. As deposited amorphous samples of sputter deposited Ge{sub 15}Sb{sub 85} have been investigated by extended x-ray absorption fine structure (EXAFS) measurements on both, Sb and Ge K absorption edges. After crystallizing the specimen, x-ray diffraction (XRD) and EXAFS measurements have been performed to analyze the atomic structure at different annealing conditions. Thus, experimental techniques focusing on the long range order as well as on the local order have been combined. Sb atoms have on average 3.2(2) nearest neighbors, while Ge atoms have 4.0(3). The Ge-Ge and Ge-Sb bond lengths are determined to 2.46(2) and 2.66(1) A, respectively and agree well with those observed in the amorphous phase of the common phase-change material Ge{sub 2}Sb{sub 2}Te{sub 5}. After crystallizing the sample at 250 deg. C, very different EXAFS spectra with modified Ge-Sb bond lengths are observed. The higher concentration of Ge neighbors at the Ge edge as compared to the as-deposited sample is indicative for phase separation. For the corresponding sample, XRD does not show reflections of Ge, which indicates that the agglomeration of Ge is amorphous or below the coherence length of the x-radiation. The EXAFS spectrum shows a superposition of two phases: one with bond lengths which agree with sp{sup 3}-hybridized Ge [2.43(1) A] and another one with longer Ge-Ge bond lengths [2.79(8) A]. This result can be explained by phase separation in the material.

36 MATERIALS SCIENCE↗

Preferential refilling and planarization of grooves with amorphous carbon by using gas cluster ion beam irradiations

Surface planarization is important for fabrication of patterned media. One of the methods is smoothing of the patterned surface after deposition of refilling materials. However it requires two process steps. In this study, we studied planarization of patterned media by formation of refilling films with gas cluster ion beam (GCIB) assisted deposition to reduce the process step. Hard amorphous carbon films were deposited on line-and-space pattern (100 nm pitch, 20 nm in depth) by using Ar-GCIB assisted deposition. From the atomic force microscope and the cross-sectional transmission electron microscope observations, the line-and-space patterns were refilled with amorphous carbon films with Ar-GCIB assisted deposition and smooth surface was obtained. The thickness of the amorphous carbon film required for surface planarization was 32 nm, which was very small compared to the initial peak to valley (20 nm). By using this method, sputtering process for planarization can be omitted.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-k (k=30) amorphous hafnium oxide films from high rate room temperature deposition

Amorphous hafnium oxide (HfO{sub x}) is deposited by sputtering while achieving a very high k{approx}30. Structural characterization suggests that the high k is a consequence of a previously unreported cubiclike short range order in the amorphous HfO{sub x} (cubic k{approx}30). The films also possess a high electrical resistivity of 10{sup 14} {Omega} cm, a breakdown strength of 3 MV cm{sup -1}, and an optical gap of 6.0 eV. Deposition at room temperature and a high deposition rate ({approx}25 nm min{sup -1}) makes these high-k amorphous HfO{sub x} films highly advantageous for plastic electronics and high throughput manufacturing.

36 MATERIALS SCIENCE↗

Characterization and control of crystal nucleation in amorphous electron beam evaporated silicon for thin film solar cells

The kinetics of crystal nucleation in high-rate electron beam evaporated amorphous Si for polycrystalline thin film solar cells was systematically studied on SiN and selected ZnO:Al-coated glass substrates with dissimilar surface topographies by employing Raman spectroscopy, transmission electron microscopy, and optical microscopy. The influence of the surface topography of the substrate and the disorder of the deposited amorphous Si could be correlated to the respective characteristics of the transient and steady state regime of the nucleation rate. The steady state nucleation rate I{sub ss}, its corresponding activation energy E{sub Iss}, and consequently the size of the grains in the crystallized Si were found to be governed by the interplay between the surface roughness and the deposition temperature. The steady state nucleation rate I{sub ss} increased gradually upon increasing the substrate roughness, while lowering the deposition temperature of the amorphous Si on rough textures resulted in a decline of I{sub ss}. The time-lag {tau}, which represents a distinctive parameter for the transient regime, was only slightly affected by the substrate topography. The deposition temperature, however, had a significant influence on {tau}, with {tau} increasing by a factor of 8 upon lowering the deposition temperature from 300 to 200 deg. C for all substrate topographies. These characteristics could be correlated with the increasing structural disorder of the deposited a-Si upon decreasing the deposition temperature. Based on this analysis, we could determine design rules for the controlled preparation of large-grained poly-Si in minimized processing time on any of the used substrate types by individually adjusting the deposition temperature and implementing nucleation layers.

36 MATERIALS SCIENCE↗

Pressure-induced Amorphization in Mayenite (12CaO · 7Al2O3)

We report a joint experimental and theoretical study on high pressure structures of nanoporous mayenite (12CaO {center_dot} 7Al{sub 2}O{sub 3}). A pressure-induced amorphization was identified at -13 GPa by in situ high pressure x-ray experiments. The amorphous product can be decompressed to ambient conditions. Ab initio calculations reveal that the anisotropic deformations of empty cages break the crystallographic long-range orders, leading to the formation of high-pressure amorphous state. Furthermore, the deformation routes of empty cages are found fully dependent on their individual locally structural geometry relevant to the distribution of extra-framework oxygen ions.

74 ATOMIC AND MOLECULAR PHYSICS↗

XPS Study of Thermally Evaporated Ge-Sb-Te Amorphous Thin Films

Amorphous thin films were prepared from the bulk composition of Ge{sub 22}Sb{sub 22}Te{sub 56}(GST) alloy by thermal evaporation in good vacuum condition. The amorphous nature of as-deposited films was checked with x-ray diffraction (XRD) studies. X-ray photoelectron spectroscopy (XPS) has been used to determine the binding energies of the core electrons in amorphous thin GST films. In XPS, we performed the survey scan from the binding energy (BE) range from 0-1100 eV and core level spectra of Ge 3d, Sb 3d and Te 3d.

36 MATERIALS SCIENCE↗

Characterization of amorphous In{sub 2}O{sub 3}: An ab initio molecular dynamics study

In this work, we report on the structural and electronic properties of amorphous In{sub 2}O{sub 3} obtained with ab initio molecular dynamics. Our results show crystal-like short range InO{sub 6} polyhedra having average In-O distance consistent with x-ray spectroscopy data. Structural disorder yields band tailing and localized states, which are responsible of a strong reduction of the electronic gap. Most importantly, the appearance of a peculiar O-O bond imparts n-type character to the amorphous compound and provides contribution for interpreting spectroscopic measurements on indium based oxidized systems. Our findings portray characteristic features to attribute transparent semiconductive properties to amorphous In{sub 2}O{sub 3}.

36 MATERIALS SCIENCE↗

Nanosecond in situ transmission electron microscope studies of the reversible Ge{sub 2}Sb{sub 2}Te{sub 5} crystalline <==> amorphous phase transformation

Chalcogenide-based phase-change materials have wide use in optical recording media and are growing in importance for use in non-volatile electronic memory. For both applications, rapid switching between the amorphous and crystalline phases is necessary, and understanding the changes during rapidly driven phase transitions is of scientific and technological significance. Laser-induced crystallization and amorphization occur rapidly and changes in atomic structure, microstructure, and temperature are difficult to observe experimentally and determine computationally. We have used nanosecond-scale time-resolved diffraction with intense electron pulses to study Ge{sub 2}Sb{sub 2}Te{sub 5} during laser crystallization. Using a unique and unconventional specimen geometry, cycling between the amorphous and crystalline phases was achieved, enabling in situ transmission electron microscope (TEM) study of both microstructural and crystallographic changes caused by repeated switching. Finite element analysis was used to simulate interactions of the laser with the nano-structured specimens and to model the rapidly changing specimen temperature. Such time-resolved experimental methods combined with simulation of experimentally inaccessible physical characteristics will be fundamental to advancing the understanding of rapidly driven phase transformations.

36 MATERIALS SCIENCE↗

Transmission electron microscopy of the amorphization of copper indium diselenide by in situ ion irradiation

Copper indium diselenide (CIS), along with its derivatives Cu(In,Ga)(Se,S){sub 2}, is a prime candidate for use in the absorber layers of photovoltaic devices. Due to its ability to resist radiation damage, it is particularly well suited for use in extraterrestrial and other irradiating environments. However, the nature of its radiation hardness is not well understood. In this study, transmission electron microscopy (TEM) with in situ ion irradiation was used to monitor the dynamic microstructural effects of radiation damage on CIS. Samples were bombarded with 400 keV xenon ions to create large numbers of atomic displacements within the thickness of the TEM samples and thus explore the conditions under which, if any, CIS could be amorphized. By observing the impact of heavily damaging radiation in situ--rather than merely the end-state possible in ex situ experiments--at the magnifications allowed by TEM, it was possible to gain an understanding of the atomistic processes at work and the underlying mechanism that give rise to the radiation hardness of CIS. At 200 K and below, it was found that copper-poor samples could be amorphized and copper-rich samples could not. This difference in behavior is linked to the crystallographic phases that are present at different compositions. Amorphization was found to progress via a combination of one- and two-hit processes. The radiation hardness of CIS is discussed in terms of crystallographic structures/defects and the consequences these have for the ability of the material to recover from the effects of displacing radiation.

36 MATERIALS SCIENCE↗

Electrical properties of the amorphous interfacial layer between Al electrodes and epitaxial NiO films

The amorphous interfacial layer (a-IL) between Al electrode and epitaxial NiO films were studied using electron energy-loss spectroscopy (EELS) and energy-dispersive x-ray spectroscopy. Two distinct properties were found in the a-IL, i.e., a lower metallic and an upper insulating layer. EELS results revealed that the metallic Ni atoms were responsible for the conducting nature of the lower oxide amorphous layer. The resistance behavior of Al/a-IL/epi-NiO was changed from a high to a low resistance state after forming process. The resistance change could be explained by the formation of a nanocrystalline metal alloy in the insulating amorphous layer.

36 MATERIALS SCIENCE↗

Plasma plume effects on the conductivity of amorphous-LaAlO{sub 3}/SrTiO{sub 3} interfaces grown by pulsed laser deposition in O{sub 2} and Ar

Amorphous-LaAlO{sub 3}/SrTiO{sub 3} interfaces exhibit metallic conductivity similar to those found for the extensively studied crystalline-LaAlO{sub 3}/SrTiO{sub 3} interfaces. Here, we investigate the conductivity of the amorphous-LaAlO{sub 3}/SrTiO{sub 3} interfaces grown in different pressures of O{sub 2} and Ar background gases. During the deposition, the LaAlO{sub 3} ablation plume is also studied, in situ, by fast photography and space-resolved optical emission spectroscopy. An interesting correlation between interfacial conductivity and kinetic energy of the Al atoms in the plume is observed: to assure conducting interfaces of amorphous-LaAlO{sub 3}/SrTiO{sub 3}, the kinetic energy of Al should be higher than 1 eV. Our findings add further insights on mechanisms leading to interfacial conductivity in SrTiO{sub 3}-based oxide heterostructures.

36 MATERIALS SCIENCE↗

Nanocrystallization of amorphous M-Si thin film composites (M=Cr, Mn) and their thermoelectric properties

We report on electrical resistivity and thermoelectric power of Cr-Si and Mn-Si composite films at temperatures from 300 K to 1000 K. The films were deposited on unheated Si/SiO{sub 2} substrates by magnetron sputtering from composite targets. The as-deposited films have amorphous structure. We use annealing with in-situ transport properties measurements to transform the films into nanocrystalline state with continuous monitoring their state. Nanocrystallization is considered as a promising way to improve thermoelectric efficiency, primarily due to reduction of lattice thermal conductivity {kappa}. Among variety of methods for fabrication of NC materials, crystallization from amorphous state has features which are crucially important with respect to their electronic transport properties: since the crystallites and their interfaces are formed in this method via solid state reaction, the NC samples are dense and the interfaces are clean. This removes additional factors affecting properties of a nanocrystalline composite, such as contamination of nanocrystal interfaces by elements from environment or nanocrystal lattice distortion during nanocrystallization. Depending on the initial film composition, the films are transformed during annealing into single phase or multi-phase nanocrystalline composites with average grain size of 10 nm to 20 nm. We study the crystallization kinetics, stability of amorphous and nanocrystalline state and relation between electronic transport properties and structural state of the composites.

36 MATERIALS SCIENCE↗

Cryogenic ion implantation near amorphization threshold dose for halo/extension junction improvement in sub-30 nm device technologies

We report on junction advantages of cryogenic ion implantation with medium current implanters. We propose a methodical approach on maximizing cryogenic effects on junction characteristics near the amorphization threshold doses that are typically used for halo implants for sub-30 nm technologies. BF{sub 2}{sup +} implant at a dose of 8 Multiplication-Sign 10{sup 13}cm{sup -2} does not amorphize silicon at room temperature. When implanted at -100 Degree-Sign C, it forms a 30 - 35 nm thick amorphous layer. The cryogenic BF{sub 2}{sup +} implant significantly reduces the depth of the boron distribution, both as-implanted and after anneals, which improves short channel rolloff characteristics. It also creates a shallower n{sup +}-p junction by steepening profiles of arsenic that is subsequently implanted in the surface region. We demonstrate effects of implant sequences, germanium preamorphization, indium and carbon co-implants for extension/halo process integration. When applied to sequences such as Ge+As+C+In+BF{sub 2}{sup +}, the cryogenic implants at -100 Degree-Sign C enable removal of Ge preamorphization, and form more active n{sup +}-p junctions and steeper B and In halo profiles than sequences at room temperature.

36 MATERIALS SCIENCE↗

Solid state amorphization in the Al-Fe binary system during high energy milling

In the present study, mechanical alloying (MA) of Al75Fe25 elemental powders mixture was carried out in argon atmosphere, using a high energy attritor ball mill. The microstructure of the milled products at different stages of milling was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and differential scanning calorimetry (DSC). The results showed that the amorphous phase content increased by increasing the milling time, and after 50 hours the amorphization process became complete. Heating the samples resulted in the crystallization of the synthesized amorphous alloys and the appearance of the equilibrium intermetallic compounds Al{sub 5}Fe{sub 2}.

36 MATERIALS SCIENCE↗

Fully coupled, dynamic model of a magnetostrictive amorphous ribbon and its validation

Magnetostrictive amorphous ribbons are widely used in electronic article surveillance as well as for magnetoelastic sensors. Both applications utilize the fact that the ribbons' resonant frequency can be read out remotely by applying external magnetic AC fields. This paper proposes a magnetomechanical model to simulate the dynamics of such ribbons. The goal was to only use general material properties as input parameters, which are usually denoted in the data sheet of amorphous metals. Thus, only the magnetization curve at zero stress has to be gained via measurement. The magnetization under stress is calculated thereof. The equation of motion for a longitudinally oscillating ribbon is derived and coupled to Maxwell's equations for magnetostatics. The fully coupled initial value problem is solved simultaneously by a finite difference approach. The model is validated by comparing calculated and measured resonant frequencies of various amorphous ribbons, which turned out to be in good agreement. When slightly adapting single material properties from the data sheet, the match is almost perfect. The model is then used to calculate the local magnetic and mechanical properties inside static and vibrating ribbons. These local distributions can be directly linked to the field dependence of the resonant frequency and its higher harmonics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Short-range correlations control the G/K and Poisson ratios of amorphous solids and metallic glasses

The bulk modulus of many amorphous materials, such as metallic glasses, behaves nearly in agreement with the assumption of affine deformation, namely that the atoms are displaced just by the amount prescribed by the applied strain. In contrast, the shear modulus behaves as for nonaffine deformations, with additional displacements due to the structural disorder which induce a marked material softening to shear. The consequence is an anomalously large ratio of the bulk modulus to the shear modulus for disordered materials characterized by dense atomic packing, but not for random networks with point atoms. We explain this phenomenon with a microscopic derivation of the elastic moduli of amorphous solids accounting for the interplay of nonaffinity and short-range particle correlations due to excluded volume. Short-range order is responsible for a reduction of the nonaffinity which is much stronger under compression, where the geometric coupling between nonaffinity and the deformation field is strong, whilst under shear this coupling is weak. Predictions of the Poisson ratio based on this model allow us to rationalize the trends as a function of coordination and atomic packing observed with many amorphous materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhanced catalyst-free nucleation of GaN nanowires on amorphous Al{sub 2}O{sub 3} by plasma-assisted molecular beam epitaxy

We report on plasma-assisted molecular beam epitaxial growth of GaN nanowires (NWs) on Si(111) substrates with a thin amorphous Al{sub 2}O{sub 3} buffer layer deposited by atomic layer deposition. Comparison of nucleation kinetics shows that presence of amorphous Al{sub 2}O{sub 3} buffer significantly enhances spontaneous nucleation of GaN NWs. Slower nucleation was observed on partially amorphous silicon nitride films. No growth of NWs was found on sapphire substrate under the same growth conditions which we explain by a low density of defects on monocrystalline substrate surface where NWs may nucleate. Our finding shows that tuning of substrate microstructure is an efficient tool to control rate of self-induced nucleation of GaN NWs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strong strain rate effect on the plasticity of amorphous silica nanowires

With electron-beam (e-beam) off, in-situ tensile experiments on amorphous silica nanowires (NWs) were performed inside a transmission electron microscope (TEM). By controlling the loading rates, the strain rate can be adjusted accurately in a wide range. The result shows a strong strain rate effect on the plasticity of amorphous silica NWs. At lower strain rate, the intrinsic brittle materials exhibit a pronounced elongation higher than 100% to failure with obvious necking near ambient temperature. At the strain rate higher than 5.23 × 10{sup −3}/s, the elongation of the NW decreased dramatically, and a brittle fracture feature behavior was revealed. This ductile feature of the amorphous silica NWs has been further confirmed with the in-situ experiments under optical microscopy while the effect of e-beam irradiation could be eliminated.

77 NANOSCIENCE AND NANOTECHNOLOGY↗