SEARCH · Search NASA
Results for “Aging effect”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The effect of cryogenic thermal cycling on aging, rejuvenation, and mechanical properties of metallic glasses
Not Available
Effect of surface characteristics and environmental aging on wetting of Cr-coated Zircaloy-4 accident tolerant fuel cladding material
Not Available
A comprehensive study of the effects of long-term thermal aging on the fracture resistance of cast austenitic stainless steels
Not Available
Effect of temperature on light induced degradation in methylammonium lead iodide perovskite thin films and solar cells
Here in this study we investigate the light and heat-induced degradation of methylammonium lead iodide (MAPbI 3 ) perovskite films in an inert atmosphere to exclude the effect of oxygen and humidity. Films aged under solar intensities started to degrade above 75 °C, while films in the dark degraded at 95 °C. To investigate the temperature-induced degradation mechanism, spectroscopic techniques such as Ultraviolet-Visible (UV–Vis) absorption spectroscopy, X-Ray Diffraction (XRD), Extended X-ray Absorption Fine Structure (EXAFS), and Fourier Transform Infrared (FT-IR) were used. Results show that the films aged under light at 75 °C degraded to a mixture of PbI 2 and metallic Pb. In contrast, films aged thermally in the dark, or with light and oxygen, degraded to PbI 2 only. MAPbI 3 solar cells were aged to show the effect of the metallic lead on the charge transfer mechanism
Effects of physical, chemical, and biological ageing on the mineralization of pine wood biochar by a Streptomyces isolate
If biochar is to be used for carbon (C) management, we must understand how weathering or ageing affects biochar C mineralization. Here, we incubated aged and unaged eastern white pine wood biochar produced at 350 and 550°C with a Streptomyces isolate, a putative biochar-decomposing microbe. Ageing was accelerated via three different processes, namely, (a) physical ageing–subjecting biochar to alternating freeze-thaw and wet-dry cycles, (b) chemical ageing–treating biochar with concentrated hydrogen peroxide and (c) biological ageing–incubating biochar in the presence of nutrients and microorganisms. Elemental composition and surface chemistry (Fourier Transform Infrared spectroscopy) of biochar samples were compared before and after ageing. Biochar C mineralization between ageing treatments was significantly different in the case of 350°C biochar ( p value = 0.03). Among the 350°C biochars, physical ageing resulted in the greatest increase (by 103%) in biochar C mineralization ( p value = 0.05). However, in the case of 550°C biochar, ageing did not result in a significant change in biochar C mineralization ( p value = 0.40). Biochar C mineralization was positively correlated with an increase in O/C ratio post-ageing ( r s = 0.86, p value = 0.01). In the case of 350°C biochar, surface oxidation during ageing enhanced biochar degradation by the isolate. For 550°C biochar, however, ageing did not significantly increase biochar C mineralization, likely due to high condensed aromatic C content and lower surface oxidation during ageing. The results from our study suggest that low temperature aged biochar is more susceptible to biological degradation by soil microbes. These findings have implications for the use of biochar for long term C storage in soils.
Using Calorimetry Techniques to Investigate the Effects of Dwell Time and Thermal Aging on Polymer Crystallization During Laser-Based Powder Bed Fusion
Explore the source record for details and available documents.
Quantifying the effects of neutron dose, dose protraction, age and sex on mouse survival using parametric regression and machine learning on a 21,000-mouse data set
Explore the source record for details and available documents.
Effects of real-time thermal aging on graphite/polyimide composites
As part of a program to evaluate high-temperature advanced composites for use on supersonic cruise transport aircraft, two graphite/polyimide composites have been aged at elevated temperatures for times up to 5.7 years. Work on the first, HT-S/710 graphite/polyimide, was started in 1974. Evaluation of the second polyimide, Celion 6000/LARC-160, began in 1980. Baseline properties are presented, including unnotched and notched tensile data as a function of temperature, compression, flexure, shear, and constant-amplitude fatigue data at R = 0.1 and R = -1. Tensile specimens were aged in ovens where pressure and aging temperatures were controlled for various times up to and including 50,000 hours. Changes in tensile strength were determined and plotted as a function of aging time. The HT-S/710 composite aged at 450 F and 550 F if compared to the Celion 6000/LARC-160 composite aged at 350 F and 450 F. After tensile testing, many of the thermal aging specimens were examined using a scanning electron microscope. Results of these studies are presented, and changes in properties and degradation mechanisms during high-temperature aging are discussed and illustrated using metallographic techniques.
Effect of long-term thermal aging on coated Celion/LARC-160 composites
Coated and uncoated unidirectional laminates of Celion (Trademark)/LARC-160 graphite/polyimide were thermally aged in air at temperatures of 204, 260, and 316 C for various times up to 15,000 hours. Selected panels were coated with a high temperature coating resin (polyphenyl quinoxaline--PPQ): 1) edges only; 2) top and bottom only; 3)completely; or 4) not at all. Periodically during aging, panels were removed from the ovens, weighed, and short beam shear (SBS) specimens cut from selected locations in the panels. The protective coating did not influence the retention of SBS strength during thermal aging but did not lessen the amount of weight-loss incurred. The integrity of the PPQ coating was completely destroyed during aging at 316 C.
Preliminary investigation of effects of gamma radiation on age-hardening rate of an aluminum-copper alloy
Explore the source record for details and available documents.
Exploring the Genomic Effects of Ionizing Radiation on Cellular Aging
Explore the source record for details and available documents.
Effects of cyclic heat treatment and aging on superelasticity in oligocrystalline Fe-Mn-Al-Ni shape memory alloy wires
Explore the source record for details and available documents.
Dose Rate Effects on Degradation of Nuclear Power Plant Electrical Cable Insulation at a Common Dose
The intent of this report is to address an identified knowledge gap in relating accelerated aging of nuclear electrical cables to service aging: dose rate effects (DRE). Here, DRE refer to gamma radiation-induced polymer degradation being a function of dose rate in addition to total absorbed dose. The concern raised is that historical qualification conducted at higher dose rates to simulate service lifetime may underestimate insulation degradation that occurs at lower dose rates in service. In the work described herein, common nuclear cable insulation materials—cross-linked polyethylene (XLPE) and ethylene propylene diene elastomer (EPDM)—were subjected to accelerated aging at ambient temperature (26°C) at different gamma dose rates of 100, 200 and 1800 Gy/h for select exposure durations to achieve constant total doses of 170, 210 and 300 kGy to evaluate DRE. First, the cable insulation material types investigated are described. Then, the accelerated aging experimental process involving gamma irradiation applied to the insulation specimens at room temperature and different dose rates is discussed. Then, the experimental characterization techniques used to perform this work are elucidated. These include elongation at break (EAB), mass change, yellowness index (YI), carbonyl index (CI), density, indenter modulus (IM), and relaxation constant (t). Theory of polymer degradation is discussed, and characterization results and discussion are provided. Finally, concluding remarks are made. The findings from this work and cited prior work reveal that DRE are material dependent, even between similar material categories (e.g., XLPE). In the case of the EPDM studied, degradation of ductility was observed to be greater at higher dose rate for the same total dose, indicating accelerated gamma aging to be more conservative than extended aging. Thus, conclusions regarding the conservatism of historical qualification likely require additional consideration for specific materials and conditions in question. The results of this study support the contention that, due to inherent limitations and uncertainties associated with prediction of cable remaining useful life from accelerated aging experiments, trending of installed cable insulation health status will be more practical and useful for safe and efficient cable aging management repair and replace decisions than lifetime prediction from historical qualification. The combination of material robustness demonstrated by the qualification process and ongoing monitoring of cable health status combine to provide confidence in continued safe use of existing nuclear cables. Additional research into effective and efficient condition monitoring methods for non-destructive evaluation of installed cables is needed to support aging cable management, including material studies to inform interpretation of measured results.
Design guidelines for hybrid microcircuits; organic adhesives for hybrid microcircuits
The properties of organic adhesives were studied to acquire an adequate information base to generate a guideline document for the selection of adhesives for use in high reliability hybrid microcircuits. Specific areas covered include: (1) alternate methods for determining the outgassing of cured adhesives; (2) effects of long term aging at 150C on the electrical properties of conductive adhesives; (3) effects of shelf life age on adhesive characteristics; (4) bond strengths of electrically conductive adhesives on thick film gold metallization, (5) a copper filled adhesive; (6) effects of products outgassed from cured adhesives on device electrical parameters; (7) metal migration from electrically conductive adhesives; and (8) ionic content of electrically insulative adhesives. The tests performed during these investigations are described, and the results obtained are discussed in detail.
MOSAIC: An Effective FFT-based Numerical Method to Assess Aging Properties of Concrete
As the nuclear fleet in the United States ages and subsequent license renewal applications grow, the prediction of concrete durability at extended operation becomes more important. To address this issue, a Fast-Fourier Transform (FFT) method is utilized to simulate aging-related degradation of concrete within the Microstructure Oriented Scientific Analysis of Irradiated Concrete (MOSAIC) software. MOSAIC utilizes compositional phase maps to simulate damage from radiation-induced volumetric expansion (RIVE), applied force, creep, and thermal expansion. This compositional detail allows each mineral in the microstructure to be assigned specific material properties, allowing the simulation to be as accurate and representative as possible. The principal goal of MOSAIC is to simulate the effects of nonlinear aging mechanisms occurring in nuclear concrete on the macroscopic mechanical properties, using only the aggregate microstructure compositional information as a starting point. Here, several realistic example simulations are shown to demonstrate the utility and uniqueness of the MOSAIC software.
Strong Sensitivity of Simulated Biomass Burning Aerosol Transport and Radiative Effects Over the South Atlantic to Carbonaceous Aerosol Aging and Particle Density
Biomass burning aerosol (BBA) impacts climate through aerosol‐cloud‐radiation interactions, but models disagree on the sign and magnitude of BBA radiative effects. We quantify the sensitivity of BBA radiative effects and transport to three BBA‐relevant processes and properties: parameterized oxidative aging of organic aerosol (OA), a combined change to black carbon (BC) density and the method for calculating aerosol refractive index, and reduction in OA density. We evaluate Unified Model simulations against two aircraft campaigns from summer 2017 over the Southeast Atlantic. The model generally performs well, such that discrepancies between the observational data sets may sometimes limit the precision of the evaluation. Our newly developed aging parameterization reproduces observed OA:BC mass ratios well and allows modeled OA:BC to decrease with smoke age, but increases bias in aerosol extinction and changes the BBA radiative effect little (+0.12 W m -2 ). We calculate aerosol refractive index using either a volume‐weighted component average or the Maxwell‐Garnett (MG) mixing assumption, which represents BC as small inclusions in a host material. Compared to MG mixing, the volume‐weighted average refractive index and reduced BC density increase aerosol absorption, substantially increasing the total BBA radiative effect (+2.66 W m -2 ) and amount of BBA transported across the ocean through BC self‐lofting. Reducing OA density to better match literature values changes the total BBA radiative effect by −1.96 W m -2 . Changes to direct radiative effects exceed changes to cloud radiative effects. Our findings emphasize the sensitivity of aerosol radiative effects and transport to these processes and properties, which we suggest could be improved in climate models.