Assessing Parameterized Geometric Models of Woven Composites using Image-Based Simulations - Poster.
Abstract not provided.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Abstract not provided.
We propose a model for a superconductor-metal composite that allows to derive intrinsic transport properties of the superconducting phase based on 2D images of its cross section, and a minimal set of parameters. The method is tested experimentally by using, as model composite, a “transversal bridge” made on a Bi{sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub 10+x} (BSCCO)-Ag multi-filamentary tape. It is shown that the approach allows to predict the measured I−〈E〉 curves of the filaments. In addition, one can determine the critical current anisotropy between the longitudinal and transverse directions of the Ag-BSCCO tape, and also of its superconducting filaments separately, which emphasizes the role of the morphology of the composite in the transport properties.
Theoretical models of shockproof composite materials based on two-layer graphenes and multilayer polyvinylidene fluoride C{sub 124}H{sub 40} + n(H–(C{sub 2}H{sub 2}F{sub 2}){sub 5}–H) (n = (1, 8)-bar ) are constructed. The electronic structure is studied using the semiempirical PM3 method that is one of version of the molecular orbital method. The orbital energies, ionization potentials, total electron energies, strength, and other properties of the considered material are calculated based on the theoretical models. The outlooks for application of these materials in the military field for manufacturing superstrong and lightweight flak jackets are considered.
A correct representation of the dynamic load is vital for power system planning and operation. In a composite load model, different motor types have different protection schemes. In addition, motor types vary significantly in different building type. Existing load models are inadequate to handle the growing importance of protective devices in buildings. This work proposed a methodology to generate composite protection profiles in one-hour interval in one year, for different commercial buildings in representative cities from different climate zones. This work can be used to develop the composite protection model, and to study the aggregated performance of the protection of all the motor loads in the composite load model.
The use of SiC and SiC-composites in fission or fusion environments requires joining methods for assembling systems. The international fusion community designed miniature torsion specimens for joint testing and irradiation in test reactors with limited irradiation volumes. These torsion specimens fail out-of-plane when joints are strong and when elastic moduli are within a certain range compared to SiC, which causes difficulties in determining shear strengths for joints or for comparing unirradiated and irradiated joints. A finite element damage model was developed that indicates fracture is likely to occur within the joined pieces to cause out-of-plane failures for miniature torsion specimens when a certain modulus and strength ratio between the joint material and the joined material exists. The model was extended to treat elastic-plastic joints such as SiC/epoxy and steel/epoxy joints tested as validation of the specimen design.
This paper extends recent work done by the authors in modeling length scale-dependent damage behavior of ceramic matrix composites (CMCs) to include effects of local anisotropy introduced by matrix cracking. This model captures scale-dependent damage initiation and propagation behavior of the brittle matrix by employing internal state variable (ISV) theory within a multiscale modeling framework to obtain damaged matrix stress/strain constitutive relationships at each length scale. The damage ISV captures the effects of matrix cracking and growth by using fracture mechanics and the self-consistent scheme to determine the reduced stiffness of the cracked matrix. Matrix cracks, which activate when stress intensity factors near manufacturing induced cavities exceed the fracture toughness of the material, are assumed to be transversely isotropic in the plane of the crack, and matrix anisotropy occurs when the damaged stiffness tensor is rotated from the crack plane to the global axes. The crack progression and temporal evolution of the damage ISV are governed by fracture mechanics and crack growth kinetics. The model effectively captures first matrix cracking, which is the first significant deviation from linear elasticity. The nonlinear predictive capabilities of the material model are demonstrated for monolithic silicon carbide (SiC) and a 2D woven five-harness satin (5HS) carbon fiber SiC matrix (C/SiC) CMC.
Here, we consider a theory with composite top quarks but an elementary Higgs boson. The hierarchy problem can be solved by supplementing TeV scale top compositeness with either supersymmetry or Higgs compositeness appearing at the multi-TeV scale. Furthermore, the Higgs boson couples to uncolored partons within the top quark. We also study how this approach can give rise to a novel screening effect that suppresses production of the colored top partners at the LHC. Strong constraints arise from Z to $\bar{b}$b, as well potentially from avor physics. Independent of flavor considerations, current constraints imply a compositeness scale &TeV; this implies that the model is likely tuned at the percent level. Four top quark production at the LHC is a smoking-gun probe of this scenario. New CP violation in D meson mixing is also possible.
In this paper we explore the possibility of a pseudoscalar resonance to account for the 750 GeV diphoton excess observed both at ATLAS and at CMS. We analyze the ingredients needed from the low energy perspective to obtain a sufficiently large diphoton rate to explain the signal while avoiding constraints from other channels. Additionally, we point out composite Higgs models in which one can naturally obtain a pseudoscalar at the 750 GeV mass scale and we estimate the pseudoscalar couplings to standard model particles that one would have in such models. A generic feature of models that can explain the excess is the presence of new particles in addition to the 750 GeV state. In conclusion, we note that due to the origin of the coupling of the resonance to photons, one expects to see comparable signals in the Zγ, ZZ, and W W channels.
This chapter presents a novel online learning system for classification of email texts based on particle learning for composite mixture models involving probabilistic automata. The composite mixture structure allows specification of a joint probability model for heterogeneous collections of independent variables without requiring complex embeddings via generalized linear models or copula techniques. The chapter is organized as follows. Section 12.2 presents a hierarchical model representation of a class of probabilistic automata and derives the particle learning algorithm for obtaining parameter estimates. Section 12.3 describes a framework for semisupervised text classification problems based on a composite mixture model formulation. Section 12.4 discusses an application of the classifier to a spam detection dataset. Section 12.5 concludes with a discussion of computational considerations and future work.
A model of the acceleration of light impurity particles from a plane ultrathin foil of complex ion composition by a high-power ultrashort high-contrast laser pulse is proposed. A study is made of both purely Coulomb ion acceleration, typical of extremely high electron energies, and ion acceleration under the conditions of space charge separation, determined by the finite typical electron temperature. Exact and approximate analytic approaches to describing impurity particle acceleration are developed. The spatial and spectral parameters of accelerated light particles are obtained, and their dynamics is investigated as a function of their relative charge density in a model of test impurity particles and in a model in which their own electrostatic field is taken into account. Optimum conditions for the generation of quasi-monoenergetic ions are discussed, depending on the laser radiation parameters and target composition.
While standard solar model (SSM) predictions depend on approximately 20 input parameters, SSM neutrino flux predictions are strongly correlated with a single model output parameter, the core temperature 𝑇 𝑐 . Consequently, one can extract physics from solar neutrino flux measurements while minimizing the consequences of SSM uncertainties, by studying flux ratios with appropriate power-law weightings tuned to cancel this 𝑇 𝑐 dependence. Here, we reexamine an idea for constraining the primordial C + N content of the solar core from a ratio of CN-cycle 15 O to pp-chain 8 B neutrino fluxes, showing that non-nuclear SSM uncertainties in the ratio are small and effectively governed by a single parameter, the diffusion coefficient. We point out that measurements of both CN-I cycle neutrino branches— 15 O and 13 N 𝛽-decay—could, in principle, lead to separate determinations of the core C and N abundances, due to out-of-equilibrium CN-cycle burning in the cooler outer layers of the solar core. Lastly, we show that the strategy of constructing “minimum uncertainty” neutrino flux ratios can also test other properties of the SSM. In particular, we demonstrate that a weighted ratio of 7 Be and 8 B fluxes constrains a product of S-factors to the same precision currently possible with laboratory data.
Presentation on experimentation, idealized modeling and image-based modeling of composites subject to moisture uptake.
A physics-informed recurrent neural network (RNN) based surrogate model is developed to emulate the nonlinear, time-dependent constitutive behavior of ceramic matrix composites (CMCs) driven by matrix damage and constituent creep at the microscale. Physics-informed constraints are introduced into the surrogate model through regularization to ground the prediction in physics and improve its predictive capabilities. Training data is generated using the high-fidelity generalized method of cells (HFGMC) approach which calls appropriate creep and damage models for each of the constituents. This coupling permits simulating the nonlinear behavior of CMCs based on constituent response at the microscale along with microstructural features such as fiber and porosity volume fraction and fiber radius. The microscale repeating unit cell is loaded under creep fatigue conditions to replicate the material loading experienced in a turbine engine. Therefore, the RNN-based surrogate model is tasked with predicting, as a function of variable input stress sequence, temperature, and microstructural features, the resulting strain history response while satisfying physical constraints related to creep rate, isochoric inelastic deformation, and strain energy density. The trained surrogate model is shown to effectively match the strain history over quantified distributions of microstructural features and relevant loading regimes and temperatures. Neural network based surrogate models can offer efficient alternatives to running computationally intensive multiscale material models to simulate the nonlinear response of large structural models. Therefore, the presented work provides evidence towards the feasibility of developing, training, and running such models for CMCs with complex microstructures, nonlinear time-dependent material response, and under non-monotonic loading conditions.
We are grateful to H. Emmerich and D. Pilipenko for their valuable comments on our previous paper. Here is our response to their comment "In our opinion it is arguable if this observed nucleation behavior as well as its interpretation is truly physical for two reasons" [1].
The electrical conductivity of a two-dimensional structurally anisotropic model for a composite is considered. The model represents an isotropic matrix with a system of nonconducting inclusions in the form of infinitely thin straight line segments (scratches). The scratches make an angle {theta} or -{theta} with a preferred axis (for definiteness, axis y) at the same probability, and their centers are chaotically distributed. An approximate effective medium method is used to obtain a general expression for the effective conductivity tensor of this model that is valid over a wide concentration range. In this approximation, both components of tensor are shown to vanish at the same percolation threshold, which is expressed explicitly. The conductivity of the model in a critical region is considered in terms of the similarity hypothesis.
Mechanical failure modes of a graphite/polyvinylidene difluoride (PVDF) composite electrode for lithium-ion batteries were investigated by combining realistic stress-stain tests and mathematical model predictions. Samples of PVDF mixed with conductive additive were prepared in a similar way to graphite electrodes and tested while submerged in electrolyte solution. Young's modulus and tensile strength values of wet samples were found to be approximately one-fifth and one-half of those measured for dry samples. Simulations of graphite particles surrounded by binder layers given the measured material property values suggest that the particles are unlikely to experience mechanical damage during cycling, but that the fate of the surrounding composite of PVDF and conductive additive depends completely upon the conditions under which its mechanical properties were obtained. Simulations using realistic property values produced results that were consistent with earlier experimental observations.
Abstract. Composite wind turbine blades are typically reliable; however, premature failures are often in regions of manufacturing defects. While the use of damage modeling has increased with improved computational capabilities, they are often performed for worst-case scenarios in which damage or defects are replaced with notches or holes. To better understand and predict these effects, an effects-of-defects study has been undertaken. As a portion of this study, various progressive damage modeling approaches were investigated to determine if proven modeling capabilities could be adapted to predict damage progression of composite laminates with typical manufacturing flaws commonly found in wind turbine blades. Models were constructed to match the coupons from, and compare the results to, the characterization and material testing study presented as a companion. Modeling methods were chosen from established methodologies and included continuum damage models (linear elastic with Hashin failure criteria, user-defined failure criteria, nonlinear shear criteria), a discrete damage model (cohesive elements), and a combined damage model (nonlinear shear with cohesive elements). A systematic, combined qualitative–quantitative approach was used to compare consistency, accuracy, and predictive capability for each model to responses found experimentally. Results indicated that the Hashin and combined models were best able to predict material response to be within 10 % of the strain at peak stress and within 10 % of the peak stress. In both cases, the correlation was not as accurate as the wave shapes were changed in the model; correlation was still within 20 % in many cases. The other modeling approaches did not correlate well within the comparative framework. Overall, the results indicate that this combined approach may provide insight into blade performance with known defects when used in conjunction with a probabilistic flaw framework.