Results for “Communication costs” — Page 34

DOE OSTI2020

Experimental Test Bed to Enable Realistic Evaluations for Direct Transfer Trip Relaying via Private Wireless LTE Communications: Preprint

Increasing penetration levels of inverter-based distributed energy resources (DERs) in distribution systems are creating challenges in system operation. Currently, wired or proprietary wireless communications are used by advanced distribution management systems (ADMS) to detect the state of the system and control the DERs for optimal operation. Wireless communications are an alternative solution that can enable connectivity between the dispersed assets used in distribution system applications. This paper demonstrates an experimental test bed to enable the realistic evaluation of communications system characteristics for direct transfer trip (DTT) relaying of a photovoltaic inverter system using a private 900-MHz spectrum wireless LTE network. Private LTE network communications can be deployed to many remote DERs and other grid-edge devices to prevent costly infrastructure upgrades across distribution systems. In addition, this paper provides a framework for evaluating the impact of signal strength and network traffic in communications systems. The results shown develop a better understanding of the best practices for using LTE communications systems across multiple utility applications, such as protective relaying, voltage regulation, and supervisory control and data acquisition system messages.

900 MHz LTE network↗

DOE OSTI2021

Experimental Test Bed to Enable Realistic Evaluations for Direct Transfer Trip Relaying via Private Wireless LTE Communications

Increasing penetration levels of inverter-based distributed energy resources (DERs) in distribution systems are creating challenges in system operation. Currently, wired or proprietary wireless communications are used by advanced distribution management systems (ADMS) to detect the state of the system and control the DERs for optimal operation. Wireless communications are an alternative solution that can enable connectivity between the dispersed assets used in distribution system applications. This paper demonstrates an experimental test bed to enable the realistic evaluation of communications system characteristics for direct transfer trip (DTT) relaying of a photovoltaic inverter system using a private 900-MHz spectrum wireless LTE network. Private LTE network communications can be deployed to many remote DERs and other grid-edge devices to prevent costly infrastructure upgrades across distribution systems. In addition, this paper provides a framework for evaluating the impact of signal strength and network traffic in communications systems. The results shown develop a better understanding of the best practices for using LTE communications systems across multiple utility applications, such as protective relaying, voltage regulation, and supervisory control and data acquisition system messages.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NASA NTRS2004

Soft-Fault Detection Technologies Developed for Electrical Power Systems

The NASA Glenn Research Center, partner universities, and defense contractors are working to develop intelligent power management and distribution (PMAD) technologies for future spacecraft and launch vehicles. The goals are to provide higher performance (efficiency, transient response, and stability), higher fault tolerance, and higher reliability through the application of digital control and communication technologies. It is also expected that these technologies will eventually reduce the design, development, manufacturing, and integration costs for large, electrical power systems for space vehicles. The main focus of this research has been to incorporate digital control, communications, and intelligent algorithms into power electronic devices such as direct-current to direct-current (dc-dc) converters and protective switchgear. These technologies, in turn, will enable revolutionary changes in the way electrical power systems are designed, developed, configured, and integrated in aerospace vehicles and satellites. Initial successes in integrating modern, digital controllers have proven that transient response performance can be improved using advanced nonlinear control algorithms. One technology being developed includes the detection of "soft faults," those not typically covered by current systems in use today. Soft faults include arcing faults, corona discharge faults, and undetected leakage currents. Using digital control and advanced signal analysis algorithms, we have shown that it is possible to reliably detect arcing faults in high-voltage dc power distribution systems (see the preceding photograph). Another research effort has shown that low-level leakage faults and cable degradation can be detected by analyzing power system parameters over time. This additional fault detection capability will result in higher reliability for long-lived power systems such as reusable launch vehicles and space exploration missions.

Button, Robert M.↗

DOE OSTI2020

Broadband Communications Using High Voltage Transmission Lines - A Review

The possibilities afforded by using an existing transmission line infrastructure for the transport of broadband communications are many ranging from (conventional) A-to-B point-to-point links, to integration of Wi-Fi access points mounted at defined network (power and communications) locations, to operation as a fault-tolerant, rollover backup communications fabric (in conjunction with other transport media, such as optical fiber or terrestrial microwave). As stated by RCR Wireless reporter Jeff Kagan – regarding an ongoing in-field demonstration - “This is so much more cost effective for the company and so much easier for them to deliver an ultra-fast, gigabit speed, wireless internet connection anywhere there are power lines.” The same situation arises for a utility looking to augment or simply deploy a communications fabric in their region via treating the transmission line infrastructure as a communication fabric thereby reducing the cost and complexity of deployment. A circa 2020 review of broadband over powerlines (BPL) is presented here.

42 ENGINEERING↗

NASA NTRSDate not supplied

A 3D Simulation Platform for Decentralized Decision-Making in Advanced Air Mobility

This paper presents a general purpose, plug-and-play simulation platform for the use of future aviation stakeholders, such as urban airspace planners, air vehicle operators, ground operation managers, air traffic controllers and aviation researchers. The presented simulator platform is envisioned to serve as a toolkit to visualize, evaluate, and configure future advanced air mobility (AAM) operations. Highlighting features of this toolkit include a modular architecture that allows multiple smart unmanned aerial systems (UASs) to remotely connect to the simulation server and participate in decentralized decision-making scenario simulations. As an example of the decentralized decision-making scenario, an inter-agent negotiation-based conflict resolution use case is considered in this paper, where the UASs leverage the on-board/on-the-edge artificial intelligence (AI) capability to continually build situational awareness, and use this information to predict future conflicts and resolve them through machine-to-machine negotiation. As such operations are non-existent at scale currently, the presented simulation platform offers a viable and cost-effective alternative for assessing the efficacy of AAM research outcomes and challenges in future shared airspace usage. The simulation platform allows plug-n-play connectivity with AI and non-AI compute modules representing individual UAS’s flight control. Each module can interact with the simulation platform independently to communicate current and desired future states, situational awareness, and conflict resolution utilization costs for inter-agent negotiation. The simulation environment orchestrates realistic operational scenarios with spatiotemporal details, dynamic events, tactical conflict-resolution methods, interfaces for customizing air traffic control parameters, and information exchange uncertainties. In the future, this can serve as a community focused cloud simulation platform, incorporating multi-stakeholder airspace constraints from regulatory, government, city, and local agencies.

Aditya N Das↗

NASA NTRS2022

A 3D Simulation Platform for Decentralized Decision-Making in Advanced Air Mobility

This paper presents a general purpose, plug-and-play simulation platform for the use of future aviation stakeholders, such as urban airspace planners, air vehicle operators, ground operation managers, air traffic controllers and aviation researchers. The presented simulator platform is envisioned to serve as a toolkit to visualize, evaluate, and configure future advanced air mobility (AAM) operations. Highlighting features of this toolkit include a modular architecture that allows multiple smart unmanned aerial systems (UASs) to remotely connect to the simulation server and participate in decentralized decision-making scenario simulations. As an example of the decentralized decision-making scenario, an inter-agent negotiation-based conflict resolution use case is considered in this paper, where the UASs leverage the on-board/on-the-edge artificial intelligence (AI) capability to continually build situational awareness, and use this information to predict future conflicts and resolve them through machine-to-machine negotiation. As such operations are non-existent at scale currently, the presented simulation platform offers a viable and cost-effective alternative for assessing the efficacy of AAM research outcomes and challenges in future shared airspace usage. The simulation platform allows plug-n-play connectivity with AI and non-AI compute modules representing individual UAS’s flight control. Each module can interact with the simulation platform independently to communicate current and desired future states, situational awareness, and conflict resolution utilization costs for inter-agent negotiation. The simulation environment orchestrates realistic operational scenarios with spatiotemporal details, dynamic events, tactical conflict-resolution methods, interfaces for customizing air traffic control parameters, and information exchange uncertainties. In the future, this can serve as a community focused cloud simulation platform, incorporating multi-stakeholder airspace constraints from regulatory, government, city, and local agencies.

Aditya Das↗

NASA NTRS1993

A practical system for regional mobile satellite services

The Regional Mobile Satellite (MSAT) concept proposes a worldwide, interconnected mobile satellite service (MSS) network in which MSAT-type satellites provide the space segment services to separate regions (i.e., one or a few countries). Using this concept, mobile communications users across entire continents can now be served by a handful of regionally controlled satellites in geostationary earth orbit (GEO). All requirements, including hand-held telephone capabilities, can be cost-effectively provided using proven technologies. While other concepts of regional or global mobile communications continue to be explored, the Hughes Regional MSAT system demonstrates the near-term viability of the GEO approach.

Glein, Randall↗

NASA NTRS2003

Space Based Communications

Current space lift launches on the Eastern and Western Range require extensive ground-based real-time tracking, communications and command/control systems. These are expensive to maintain and operate and cover only limited geographical areas. Future spaceports will require new technologies to provide greater launch and landing opportunities, support simultaneous missions, and offer enhanced decision support models and simulation capabilities. These ranges must also have lower costs and reduced complexity while continuing to provide unsurpassed safety to the public, flight crew, personnel, vehicles and facilities. Commercial and government space-based assets for tracking and communications offer many attractive possibilities to help achieve these goals. This paper describes two NASA proof-of-concept projects that seek-to exploit the advantages of a space-based range: Iridium Flight Modem and Space-Based Telemetry and Range Safety (STARS). Iridium Flight Modem uses the commercial satellite system Iridium for extremely low cost, low rate two-way communications and has been successfully tested on four aircraft flights. A sister project at Goddard Space Flight Center's (GSFC) Wallops Flight Facility (WFF) using the Globalstar system has been tested on one rocket. The basic Iridium Flight Modem system consists of a L1 carrier Coarse/Acquisition (C/A)-Code Global Positioning System (GPS) receiver, an on-board computer, and a standard commercial satellite modem and antennas. STARS uses the much higher data rate NASA owned Tracking and Data Relay Satellite System (TDRSS), a C/A-Code GPS receiver, an experimental low-power transceiver, custom built command and data handler processor, and digitized flight termination system (FTS) commands. STARS is scheduled to fly on an F-15 at Dryden Flight Research Center in the spring of 2003, with follow-on tests over the next several years.

Simpson, James↗

NASA NTRS2018

A Small Satellite Mission for Solar Coronagraphy

We present on a concept study of the Goddard Miniature Coronagraph (GMC) mission for measuring the plasma flow in the solar corona in the form of solar wind and coronal mass ejections (CMEs). These mass flows can dramatically alter the near-Earth space environment to hazardous conditions posing danger to human technology in space. The primary science objective of the mission is to measure the properties of CMEs, coronal structures, and the solar wind near the Sun. The miniaturization of the coronagraph involves using a single-stage optics and a polarization camera, both of which reduce the size of the coronagraph. GMC will be accommodated in a small satellite that can be built with CubeSat material to minimize cost. The development of the Dellingr mission at NASA/GSFC has provided expertise and a clear pathway to build the GMC mission. The hardware and software used for the Dellingr (a name derived from the god of the dawn in Norse mythology) Mission are technically sound, so the GMC mission can be fully defined. Software, pointing, control and communications systems developed for GSFC CubeSats can be readily adapted to cut costs. We present orbit options such as an ISS (International Space Station) orbit or a Sun-synchronous dawn-dusk polar orbit with the aim of maximizing solar observations.

Gopalswamy, N.↗

NASA NTRS1997

The Status of Ka-Band Communications for Future Deep Space Missions

Over the past decade, the Jet Propulsion Laboratory's Telecommunications and Mission Operations Directorate has invested in a variety of technologies, targeted at both the flight and ground sides of the communications link, with the goal of developing a Ka-band (32 GHz) communications capability for future deep space missions.

Power Amplifiers↗

DOE OSTI2022

LC-MEMENTO: A Memory Model for Accelerated Architectures

With the advent of heterogeneous architectures, in particular, with the ubiquity of multi-GPU systems, it is becoming increasingly important to manage device memory efficiently in order to reap the benefits of the additional core count. To date, such responsibility mainly falls on the programmer where device-to-host data communication (and vice versa), if not done properly, may incur costly memory transfer operations and synchronization. The problem may be compounded by additional requirement to maintain system-wide memory consistency that may involve expensive synchronization overhead. In this paper, we present Location Consistency Memory Model for Enhanced Transfer Operations (LC-MEMENTO). This framework considers incorporating runtime techniques for multi-GPU memory management to support relaxed synchronization semantics and memory transfer operations automatically. Specifically, we implement a relaxed form of a memory consistency model based on the Location Consistency (LC) in an Asynchronous Many-Task Runtime (ARTS) and demonstrate that, this memory model enables additional optimization opportunities for the three representative applications encompassing different computational patterns (scientific computation, graphs, data streaming, etc.).

Memory Models, Accelerators, Adaptive Optimization↗

DOE OSTI2021

MiniCarb: a passive, occultation-viewing, 6U CubeSat for observations of CO 2 , CH 4 , and H 2 O

In this report we present the final design, environmental testing, and launch history of MiniCarb, a 6U CubeSat developed through a partnership between NASA Goddard Space Flight Center and Lawrence Livermore National Laboratory. MiniCarb’s science payload, developed at Goddard, was an occultation-viewing, passive laser heterodyne radiometer for observing methane, carbon dioxide, and water vapor in Earth’s atmosphere at ~1.6 µm s -1 . MiniCarb’s satellite, developed at Livermore, implemented their CubeSat Next Generation Bus plug-and-play architecture to produce a modular platform that could be tailored to a range of science payloads. Following the launch on 5 December 2019, MiniCarb traveled to the International Space Station and was set into orbit on 1 February 2020 via Northrop Grumman’s Cygnus capsule which deployed MiniCarb with tipoff rotation of about 20° s (significantly higher than the typical rate of 3° s -1 from prior CubeSats), from which the attitude control system was unable to recover resulting in a loss of power. In spite of this early failure, MiniCarb had many successes including rigorous environmental testing, successful deployment of its solar panels, and a successful test of the radio and communication through the Iridium network. This prior work and enticing cost (approximately $\$2$ M for the satellite and $\$$250 K for the payload) makes MiniCarb an ideal candidate for a low-cost and rapid rebuild as a single orbiter or constellation to globally observe key greenhouse gases.

47 OTHER INSTRUMENTATION↗

DOE OSTI2023

Fast Coordination of Distributed Energy Resources Over Time-Varying Communication Networks

Not Available

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2024

IoT-Based Comfort Control and Fault Diagnostics System for Energy-Efficient Homes

This project studies an Internet of Things (IoT)-based comfort control and fault diagnostics system (referred as iComfort in this report) for energy-efficient homes. The system delivers an occupant-comfort-oriented thermal environment adaptive to fault scenarios and achieves HVAC energy savings in a cost-effective and straightforward way. This smart iComfort home system consists of the following key features. 1) Cost-effectiveness and scalability of the entire hardware and software system: The system includes low-cost temperature, humidity, and airflow sensors, and a Raspberry Pi-based local hub that interfaces with the cloud and IoT-enabled devices. The cost is low, not only for sensors, but also the costs associated with sensor installation, system setup and commissioning, data communication and storage, and data analytics (e.g., the development of automated fault detection and diagnosis (AFDD), as well as adaptive control strategies that are both computationally efficient and practical to implement). 2) Energy performance and user satisfaction: The system delivers user satisfaction and energy savings. This includes a) ease of use, b) optimal occupant thermal comfort, and c) accurate system feedback (e.g., low false alarm of AFDD strategies). 3) Favorable demonstrated prototype performance: The prototype tested at the Pacific Northwest National Laboratory (PNNL) Lab Homes demonstrates the accuracy of fault detections and diagnoses and shows thermal comfort improvement and energy savings through adaptive and optimal HVAC operations.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2023

Hardware Specification and Reference Design for the Low-Cost, Interoperable, User-Centric, Supervisory Controller Kit for Small and Medium Size Commercial Buildings

Commercial buildings are responsible for approximately 20 percent of the total United States energy consumption and greenhouse gas emissions. Over 85 percent of these buildings lack building automation systems to manage the various building systems they have. Many of these buildings are small (< 50,000 square feet), underserved, and use rooftop units (RTUs) for heating, ventilation, and air-conditioning needs. Because these buildings lack proper control systems, they have several operational deficiencies that lead to excess energy consumption. Studies have shown that managing the RTU’s heating and cooling setpoints, schedules, setbacks, and optimal start times can result in 20 to 25 percent reduction in electricity consumption in small and medium commercial buildings (SMBs). In addition, improving the demand flexibility of these buildings will result in additional cost savings for the building owner. To address the needs of the SMBs, the Department of Energy’s Building Technologies Office jointly funded Pacific Northwest National Laboratory (PNNL) and Oak Ridge National Laboratory (ORNL) to design, develop, test, and validate a low-cost, interoperable, user-centric, retrofit supervisory controller kit (SC-SMB) that can be used to continuously optimize energy consumption and deliver demand flexibility of SMBs, including all-electric buildings, and provide a means for maximizing decarbonization benefits. The team also includes industry partners Edo and Intellimation. Previously, the team drafted an SC-SMB system specification document (Goodman et al. 2023). This document describes a reference design of a low-cost supervisory control system for SMBs, including the various hardware components, software system, and an example implementation of the reference design. The final release of the reference design is planned for December 2025. Section 2.0 of the report documents the relevant building types that the SC-SMB system is suitable for. Section 3.0 documents the various hardware components, their function, cost, whether they are off-the-shelve, support standard communication, etc., and the software system. An example deployment in a 10,000-sf building with six rooftop units, a hot water heater, solar, and storage is described in Section 4.0. The planned next steps are described in Section 5.0, and references are listed in Section 6.0.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2023

How an Autonomous Offshore Power System Can Transform the Ocean Economy - A Hypothetical Case Study Utilizing an Autonomous Offshore Power System in Northern Lights Carbon Capture and Storage Project

An Autonomous Offshore Power System (AOPS) provides in-situ power, energy storage, real-time data and communications support, asset management, and other capabilities at sea. It has applications for all offshore industries: energy, defense and security, aquaculture, science and research, and communications. Furthermore, this paper highlights how an AOPS can reduce cost, complexity, and carbon-intensity for existing offshore operations and enable new capabilities for offshore industry leaders. This new AOPS technology has two primary advantages. First, it unlocks the autonomous, electric future of the ocean economy via ‘local’ power generation and energy storage, in addition to real-time connection to the data cloud. Second, it helps enable a material change in the global energy mix through cost-effective, reliable generation and storage technology for use cases including mobile/static data-gathering and reporting systems, operating equipment, and charging networks for uncrewed surface vessels. AOPS technology will help transform the ocean economy, and thus has implications for offshore industry leaders as they push to reduce costs today and make an autonomous and decarbonized future possible.

16 TIDAL AND WAVE POWER↗

NASA NTRS1971

Power processing

Processing of electric power has been presented as a discipline that draws on almost every field of electrical engineering, including system and control theory, communications theory, electronic network design, and power component technology. The cost of power processing equipment, which often equals that of expensive, sophisticated, and unconventional sources of electrical energy, such as solar batteries, is a significant consideration in the choice of electric power systems.

Schwarz, F. C.↗

NASA NTRS1979

Interim radio spectrum surveillance station

Radio frequency interference at NASA's deep space stations has become a serious problem. A radio spectrum surveillance capability at these stations is needed to determine the sources of interference so that preventative measures can be taken. The first phase of a program to develop this capability was the development of a low-cost surveillance station now in operation at the Goldstone Space Communication Complex near Barstow, California. This interim surveillance station is described and findings from the use of this equipment are presented.

Hersey, D. R.↗