Search NASA⌕ Search

SEARCH · Search NASA

Results for “Comparison study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Effect of Chemical Composition on the Microstructure and Properties of the Ag-Ga-Ge Alloys

This study presents a comparison of thermodynamically calculated phase compositions of Ag-Ga-Ge alloys at fixed temperatures with phase analysis results of alloys annealed at respective temperatures. Three isothermal sections of the Ag-Ga-Ge system at 25, 100 and 300 °C have been extrapolated using optimized thermodynamic parameters from the literature. An experimental analysis of the microstructure was carried out using optical microscopy, scanning electron microscopy and energy-dispersive spectrometry. Results obtained by x-ray powder diffraction methods (identified phases and lattice parameters) were compared with the results of the predicted phase equilibria. Good overall agreement between experimental and calculated values was obtained. The Brinell hardness and electrical conductivity of selected alloys were measured and obtained results were analyzed with respect to their overall compositions and phase constituents.

36 MATERIALS SCIENCE↗

The association between vaginal microbiota disorders and early missed abortion: A prospective study

Abstract Introduction The objective of this study was to explore the association between disordered vaginal microbiota and missed abortion to ascertain potential causes of missed abortion related to vaginal microbiology. Material and methods This study was a prospective cohort study with a comparison group (reference group). Vaginal secretions from the posterior fornix of women in the early stages of pregnancy were collected in the Xiangya Third Hospital of Central South University in Changsha, Hunan, China, from November 2018 to November 2019. A total of 54 cases of missed abortion (case group) and 50 cases of normal pregnancy requiring induced abortion (reference group) were analyzed. Bacterial DNA was extracted, hybridized with gene‐specific primers, and then detected using a bacterial chip. The composition and relative abundance of vaginal microbiota in the two groups were compared using α‐diversity analysis, β‐diversity analysis, and the linear discriminant analysis effect size method. Results The α‐diversity analysis showed that the Simpson index of the case group was lower than that of the reference group, whereas the Shannon index in the case group was higher. The relative abundance of Firmicutes in the case group (42.52%) was lower than in the reference group (51.03%, p < 0.05), as was the relative abundance of Lactobacillus (case group 16.51%, reference group 23.00%; p < 0.05). Interestingly, levels of Mycoplasma genitalium and Ureaplasma were lower in the case group ( p < 0.05). The relative abundance of Lactobacillus crispatus , Lactobacillus jensenii , and Lactobacillus gasseri was also significantly lower in the case group than in the reference group ( p < 0.05). The pathways enriched in the case group were predominantly related to metabolism, whereas the genetics‐related pathways were predominantly enriched in the reference group. Conclusions Bacteria are more diverse and unevenly distributed in patients with missed abortion. Decreases in the proportion of vaginal Lactobacillus and changes in Lactobacillus species in these patients may increase the chance of genital tract pathogenic bacterial infection. To our knowledge, our study was the first to observe that a decrease of Firmicutes levels in the vaginal microbiota might impair energy metabolism and have an association with missed abortion.

Sun, Dan↗

THE NONLINEAR BIASING OF THE zCOSMOS GALAXIES UP TO z {approx} 1 FROM THE 10k SAMPLE

We use the zCOSMOS galaxy overdensity field to study the biasing of galaxies in the COSMOS field. By comparing the probability distribution function of the galaxy density contrast {delta}{sub g} to the lognormal approximation of the mass density contrast {delta}, we obtain the mean biasing function b({delta}, z, R) between the galaxy and matter overdensity fields and its second moments b-hat and b-tilde. Over the redshift interval 0.4 < z < 1 the conditional mean function ({delta}{sub g}|{delta}) = b({delta}, z, R){delta} is of a characteristic shape, requiring nonlinear biasing in the most overdense and underdense regions. Taking into account the uncertainties due to cosmic variance, we do not detect any significant evolution in the ({delta}{sub g}|{delta}) function, but we do detect a significant redshift evolution in the linear biasing parameter b-hat from 1.23 {+-} 0.11 at z {approx} 0.55 to 1.62 {+-} 0.14 at z {approx} 0.75, for a luminosity-complete sample of M{sub B} < -20 - z galaxies. The b-hat parameter does not change significantly with smoothing scale between 8 and 12 h{sup -1} Mpc, but increases systematically with luminosity (at 2{sigma}-3{sigma} significance between the M{sub B} < -20.5 - z and M{sub B} < -20 - z samples). The nonlinearity parameter b-tilde/b-hat is offset from unity by at most 2%, with an uncertainty of the same order. The b-tilde / b-hat parameter does not show any significant redshift evolution, dependence on the smoothing scale or on the luminosity. By matching the linear bias of galaxies to the halo bias, we infer that the M{sub B} < -20 - z galaxies reside in dark matter halos with a characteristic mass of about (2.6 - 5.6) x 10{sup 12} M{sub sun} with a small dependence on the adopted bias-mass relation. Our detailed error analysis and comparison with previous studies lead us to conclude that cosmic variance is the main contributor to the differences in the linear bias measured from different surveys. While our results support the general picture of biased galaxy formation up to z {approx} 1, the fine-tuning of the galaxy formation models is still limited by the restrictions of the current spectroscopic surveys at these redshifts.

79 ASTRONOMY AND ASTROPHYSICS↗

Comparative experimental study of heat transfer processes in accumulation energy recovery exchangers

In this study, an experimental comparison between three different energy accumulating ceramic heat exchangers for energy recovery in ventilation systems was presented. The units were selected to represent three different approaches on the energy recovery process: honeycomb structure with more accumulation mass (more energy can be stored in one unit)- Unit 1.1, honeycomb structure with lower accumulation mass- Unit 1.2, and a rectangular structure with expanded heat transfer surface- Unit 1.3. The achieved results are useful for the future application of such units in ventilation systems. It was established that all evaluated units demonstrated an acceptable effectiveness of thermal energy recovery from the exhaust air. Their average energy recovery efficiency ranged between 70 % and 80 %, aligning with expected performance benchmarks for regenerative heat exchangers employed in contemporary mechanical ventilation systems. It was also established that the factor which has the highest impact on thermal effectiveness is the heat transfer surface available in the tested heat exchangers. Units with the highest number of channels (i.e., with the highest amount of single channel walls, which can be used for heat transfer) achieve the highest thermal effectiveness. However, higher thermal effectiveness can negatively affect the ventilation potential of the units. Unit 1.3, which was characterized by the highest thermal efficiency, was also characterized by the lowest achievable flow rate. It was also found that the important technical aspect that should be taken into account when analyzing accumulation energy recovery units is also the fluctuation of the supply air temperature. The ability to ensure minimal temperature fluctuations is a significant operational advantage, as it ensures a higher level of safety at lower outside temperatures.

Energy recovery↗

New synthetic peptide with efficacy for heparin reversal and low toxicity and immunogenicity in comparison to protamine sulfate

Protamine sulfate (PS), the only clinically approved antidote to unfractionated heparin (UFH), is widely used for cardiopulmonary surgery or other extracorporeal circulation situations. However, the applications of PS have accompanied various severe side-effects. In this study, we presented a novel synthesized peptide compound (RRRRR-RRRRR-RRRRR-sulfate, R15S) served as a safer UFH antidote. Comparison studies were conducted between PS and R15S on efficacy and safety, aided by heparin neutralization studies, drug toxicity studies and anaphylactic analysis. Our research demonstrated that R15S contained comparable UFH neutralization activity in vitro and in rats in vivo as to active partial thromboplastin time (APTT) and anti-FXa assays. There was no cytotoxicity for R15S at 60 μg mg{sup −1} or below and the median lethal dose (LD{sub 50}) of R15S in mice was 35.4 mg kg{sup −1}, both of which were similar to that of PS. Furthermore, R15S exhibited no immunogenicity while it was obvious in guinea pigs immunized with PS. The level of cross-reactivity to anti-PS antibodies of R15S was about 30%. Both of which indicated much safer properties of R15S than PS. In conclusion, we presented a promising candidate R15S for UFH reversal, which is effective in neutralizing UFH and potentially safer in use. - Highlights: • R15 sulfate has a comparable unfractionated heparin neutralization activity to PS. • R15 sulfate avoided severe anaphylactic responses which happened to PS in clinical use. • R15 sulfate could provide a stricter quality control compared to PS which may vary with different batches.

60 APPLIED LIFE SCIENCES↗

Assessing a mini-application as a performance proxy for a finite element method engineering application

The performance of a large-scale, production-quality science and engineering application (‘app’) is often dominated by a small subset of the code. Even within that subset, computational and data access patterns are often repeated, so that an even smaller portion can represent the performance-impacting features. If application developers, parallel computing experts, and computer architects can together identify this representative subset and then develop a small mini-application (‘miniapp’) that can capture these primary performance characteristics, then this miniapp can be used to both improve the performance of the app as well as provide a tool for co-design for the high-performance computing community. However, a critical question is whether a miniapp can effectively capture key performance behavior of an app. This study provides a comparison of an implicit finite element semiconductor device modeling app on unstructured meshes with an implicit finite element miniapp on unstructured meshes. The goal is to assess whether the miniapp is predictive of the performance of the app. Finally, single compute node performance will be compared, as well as scaling up to 16,000 cores. Results indicate that the miniapp can be reasonably predictive of the performance characteristics of the app for a single iteration of the solver on a single compute node.

97 MATHEMATICS AND COMPUTING↗

Monomer volume fraction profiles in pH responsive planar polyelectrolyte brushes

Spatial dependencies of monomer volume fraction profiles of pH responsive polyelectrolyte brushes were investigated using field theories and neutron reflectivity experiments. In particular, planar polyelectrolyte brushes in good solvent were studied and direct comparisons between predictions of the theories and experimental measurements are presented. The comparisons between the theories and the experimental data reveal that solvent entropy and ion-pairs resulting from adsorption of counterions from the added salt play key roles in affecting the monomer distribution and must be taken into account in modeling polyelectrolyte brushes. Furthermore, the utility of this physics-based approach based on these theories for the prediction and interpretation of neutron reflectivity profiles in the context of pH responsive planar polyelectrolyte brushes such as polybasic poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) and polyacidic poly(methacrylic acid) (PMAA) brushes is demonstrated. The approach provides a quantitative way of estimating molecular weights of the polymers polymerized using surface-initiated atom transfer radical polymerization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Type II Endoleak After Endovascular Repair of Abdominal Aortic Aneurysm: Effectiveness of Embolization

The purpose of this study was to report our experience in treating type II endoleaks after endovascular aneurysm repair (EVAR) of abdominal aortic aneurysms. Two hundred eighteen patients underwent EVAR with a Zenith stent-graft from January 2000 to December 2005. During a follow-up period of 4.5 {+-} 2.3 years, solely type II endoleak was detected in 47 patients (22%), and 14 of them underwent secondary interventions to correct this condition. Ten patients had transarterial embolization, and four patients had translumbar/transabdominal embolization. The embolization materials used were coils, thrombin, gelatin, Onyx (ethylene-vinyl alcohol copolymer), and glue. Disappearance of the endoleak without enlargement of the aneurysm sac after the first secondary intervention was achieved in only five of these patients (5/13). One patient without surveillance imaging was excluded from analyses of clinical success. After additional interventions in four patients and the spontaneous disappearance of type II endoleak in two patients, overall clinical success was achieved in eight patients (8/12). One patient did not have surveillance imaging after the second secondary intervention. Clinical success after the first secondary intervention was achieved in two patients (2/9) in the transarterial embolization group and three patients (3/4) in the translumbar embolization group. The results of secondary interventions for type II endoleak are unsatisfactory. Although the small number of patients included in this study prevents reliable comparisons between groups, the results seem to favor direct translumbar embolization in comparison to transarterial embolization.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Growth of organized flow coherent motions within a single-stream shear layer: 4D-PTV measurements

Abstract This study investigates the evolution of a single-stream shear layer (SSSL) originating from a wall boundary layer past a backward-facing step. Utilizing a time-resolved 3D-Particle Tracking Velocimetry (4D-PTV) technique, we track the trajectories of fluorescent particles to gain insight into the flow characteristics of the SSSL. A compact water tunnel facility ( $$\textrm{Re}_\tau =1\,240$$ Re τ = 1 240 ) is fabricated to obtain an SSSL with a perpendicular slow entrainment stream past the separation edge. A hybrid interpolation approach that combines ensemble binning and Gaussian weighting is implemented to derive minimally filtered mean and instantaneous lower- and higher-order flow field parameters. Spanwise-dominant coherent motion accompanied by finer flow scales is observed to grow due to flow entrainment through “nibbling” actions of small-scale vortices, “engulfing” by large-scale vortices, and vortex pairing events. Furthermore, the non-zero-speed stream edge grows relatively faster than the zero-speed stream edge, showing a strong asymmetry in mixing composition across a mixing layer. The SSSL reaches self-similarity at a streamwise distance of $$\approx 55\,\theta _{0}$$ ≈ 55 θ 0 , where $$\theta _0$$ θ 0 is the initial momentum thickness from the separation edge, i.e., considerably shorter than reported in previous studies. A literature comparison of growth rate parameters raises intriguing questions regarding a potential inclusive growth scaling unifying the free shear layers. A turbulent kinetic energy (TKE) budget analysis reveals a negative production region immediately downstream of the separation edge attributed to a large positive streamwise gradient of streamwise velocity. In the self-similar region, the phase-averaged flow mapping demonstrates a larger concentration of turbulence production rate around the outer edges of spanwise vortices, specifically at the intersection of braids and vortices. Furthermore, a spatial separation exists in the regions of peak production and dissipation rates within the vortex core region favoring dissipation. The braids exhibit a larger concentration of turbulence diffusion rates, indicating their function as a conduit for exchanging turbulence between neighboring coherent motions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Intensification differentially affects the delivery of multiple ecosystem services in subtropical and temperate grasslands

Intensification, the process of intensifying land management to enhance agricultural goods, results in “intensive” pastures that are planted with productive grasses and fertilized. These intensive pastures provide essential ecosystem services, including forage production for livestock. Understanding the synergies and tradeoffs of pasture intensification on the delivery of services across climatic regions is crucial to shape policies and incentives for better management of natural resources. Here, we investigated how grassland intensification affects key components of provisioning (forage productivity and quality), supporting (plant diversity) and regulating services (CO 2 and CH 4 fluxes) by comparing these services between intensive versus extensive pastures in subtropical and temperate pastures in the USDA Long-term Agroecosystem Research (LTAR) Network sites in Florida and Oklahoma, USA over multiple years. Our results suggest that grassland intensification led to a decrease in measured supporting and regulating services, but increased forage productivity in temperate pastures and forage digestibility in subtropical pastures. Intensification decreased the net CO 2 sink of subtropical pastures while it did not affect the sink capacity of temperate pastures; and it also increased environmental CH 4 emissions from subtropical pastures and reduced CH 4 uptake in temperate pastures. Intensification enhanced the global warming potential associated with C fluxes of pastures in both ecoregions. Our study demonstrates that comparisons of agroecosystems in contrasting ecoregions can reveal important drivers of ecosystem services and general or region-specific opportunities and solutions to maintaining agricultural production and reducing environmental footprints. Further LTAR network-scale comparisons of multiple ecosystem services across croplands and grazinglands intensively vs extensively managed are warranted to inform the sustainable intensification of agriculture within US and beyond. Our results highlight that achieving both food security and environmental stewardship will involve the conservation of less intensively managed pastures while adopting sustainable strategies in intensively managed pastures.

60 APPLIED LIFE SCIENCES↗

Algebraic structure of general electromagnetic fields and energy flow

Highlights: > Algebraic structure of general electromagnetic fields in stationary spacetime. > Eigenvalues and eigenvectors of the electomagnetic field tensor. > Energy-momentum in terms of eigenvectors and Killing vector. > Explicit form of reference frame with vanishing Poynting vector. > Application of formalism to Bessel beams. - Abstract: The algebraic structures of a general electromagnetic field and its energy-momentum tensor in a stationary space-time are analyzed. The explicit form of the reference frame in which the energy of the field appears at rest is obtained in terms of the eigenvectors of the electromagnetic tensor and the existing Killing vector. The case of a stationary electromagnetic field is also studied and a comparison is made with the standard short-wave approximation. The results can be applied to the general case of a structured light beams, in flat or curved spaces. Bessel beams are worked out as example.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Single-Step Syngas-to-Distillates (S2D) Process Based on Biomass-Derived Syngas – A Techno-Economic Analysis

This study reports the comparison of biomass gasification based syngas-to-distillate (S2D) systems using techno-economic analysis (TEA). Three cases, state of technology (SOT) case, goal case, and conventional case, were compared in terms of performance and cost. The SOT case and goal case represent technology being developed at Pacific Northwest National Laboratory for a process starting with syngas using a single-step dual-catalyst reactor for distillate generation (S2D process). The conventional case mirrors the two-step S2D process previously utilized and reported by Mobil using natural gas feedstock and consisting of separate syngas-to-methanol and methanol-to-gasoline (MTG) processes. Analysis of the three cases revealed that the goal case could indeed reduce fuel production cost over the conventional case, but that the SOT was still more expensive than the conventional. The SOT case suffers from low one-pass yield and high selectivity to light hydrocarbons, both of which drive up production cost. Sensitivity analysis indicated that light hydrocarbon yield, single pass conversion efficiency, and reactor space velocity are the key factors driving the high cost for the SOT case.

Biomass↗

Subtle penetrant size effects on separation of carbon molecular sieve membranes derived from $\mathrm{6FDA:BPDA}$-$\mathrm{DAM}$ polyimide

Economically scalable carbon molecular sieve (CMS) hollow fiber membranes rely upon a tunable bimodal pore morphology to separate gas pairs using angstrom-level size discrimination. Freshly formed CMS membranes experience self-retarding physical aging, reflected by permeance losses and selectivity gains that stabilize over short times compared to the lifetime of the membrane. Self-retarding morphology rearrangements are of special interest here due to tightening of the largest size range of ultramicropores, thereby causing aging for polyimide-derived CMS. We report effects of such aging for two A/B penetrant pairs, C 3 H 6 /C 3 H 8 and CO 2 /CH 4 . These two pairs not only have different average sizes, $\overline{d}_{A/B}$, but also different size differences,Δd A/B , between the members in each pair. We focus primarily on the C 3 H 6 /C 3 H 8 pair, which is the most difficult of the two pairs to separate, and use some CO 2 /CH 4 results as a comparison case. We study CMS derived from 6FDA:BPDA-DAM (1:1) polyimide by pyrolysis at 550 °C, 600 °C and 650 °C. Here we suggest conditions and physical causes that expedite, retard or even suppress the aging process within CMS membranes. Finally, we suggest how analysis of CMS derived from other precursors and other penetrant pairs can be generalized by understanding the results for the 6FDA:BPDA-DAM (1:1) polyimide derived CMS.

36 MATERIALS SCIENCE↗

Experimental and chemical kinetic modeling study of small methyl esters oxidation: Methyl (E)-2-butenoate and methyl butanoate

This study examines the effect of unsaturation on the combustion of fatty acid methyl esters (FAME). New experimental results were obtained for the oxidation of methyl (E)-2-butenoate (MC, unsaturated C{sub 4} FAME) and methyl butanoate (MB, saturated C{sub 4} FAME) in a jet-stirred reactor (JSR) at atmospheric pressure under dilute conditions over the temperature range 850-1400 K, and two equivalence ratios ({phi}=0.375,0.75) with a residence time of 0.07 s. The results consist of concentration profiles of the reactants, stable intermediates, and final products, measured by probe sampling followed by on-line and off-line gas chromatography analyses. The oxidation of MC and MB in the JSR and under counterflow diffusion flame conditions was modeled using a new detailed chemical kinetic reaction mechanism (301 species and 1516 reactions) derived from previous schemes proposed in the literature. The laminar counterflow flame and JSR (for {phi}=1.13) experimental results used were from a previous study on the comparison of the combustion of both compounds. Sensitivity analyses and reaction path analyses, based on rates of reaction, were used to interpret the results. The data and the model show that MC has reaction pathways analogous to that of MB under the present conditions. The model of MC oxidation provides a better understanding of the effect of the ester function on combustion, and the effect of unsaturation on the combustion of fatty acid methyl ester compounds typically found in biodiesel. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

SOMAFOAM: An OpenFOAM based solver for continuum simulations of low-temperature plasmas

Here, we report the development of SOMAFOAM, a finite volume framework for performing continuum simulations of low-temperature plasmas. The primary goal of this work is to discuss the features of SOMAFOAM along with representative results provided as examples for a range of operating conditions and geometries. This includes plasma and plasma–dielectric systems operating in direct current, radio frequency, and microwave regimes from pressures as low as 100 mTorr to atmospheric pressure. The code has several useful features including the ability to run massively parallel simulations using arbitrary geometries, structured/unstructured meshes, choice of models such as drift–diffusion/full-momentum at runtime, and species-dependent timesteps to name a few. The verification/validation studies presented include comparison with previously published continuum simulations (low-pressure direct current and radio frequency plasma), with experiments (Gaseous Electronics Conference Reference Cell and microwave microplasma ignited in a split ring resonator), and previously published kinetic simulations (low-pressure radio frequency plasma). Other examples provided include a direct current atmospheric pressure microplasma bounded by dielectric sidewalls and a helium–nitrogen plasma ignited using a needle electrode facing a dielectric. The performance of the code is also discussed with serial and distributed memory parallel runs demonstrated up to 512 cores. The design and implementation of the code in a modular object-oriented framework allows for easy extension and seamless coupling with other codes and can be expected to play an important role in both academia and industry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An improved methodology for modeling short pulse buried layer x-ray emission spectra

Radiation-hydrodynamic and spectroscopic modeling are important aspects of high energy density experimental design. In this paper, we improve the performance and capabilities over those obtainable with a previous methodology used for simulating x-ray emission spectra from buried layer targets heated by short pulse lasers. The improvement incorporates post-processing HYDRA radiation-hydrodynamic output with a non-local thermodynamic equilibrium atomic-kinetics radiation transport code, Cretin. Each code uses an independent radiation field which allows decoupling HYDRA's radiation group structure from Cretin's spectral output to improve the speed and flexibility of the design methodology. The execution time decreases from 2–3 days to a few hours while the flexibility of the improved methodology allows for performing sensitivity studies including a comparison of steady-state and time-dependent atomic kinetics and differences in the radiation group structure.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measures of the environmental footprint of the front end of the nuclear fuel cycle

Previous estimates of environmental impacts associated with the front end of the nuclear fuel cycle (FEFC) have focused primarily on energy consumption and CO2 emissions. Results have varied widely. This work builds upon reports from operating facilities and other primary data sources to build a database of front end environmental impacts. This work also addresses land transformation and water withdrawals associated with the processes of the FEFC. These processes include uranium extraction, conversion, enrichment, fuel fabrication, depleted uranium disposition, and transportation. To allow summing the impacts across processes, all impacts were normalized per tonne of natural uranium mined as well as per MWh(e) of electricity produced, a more conventional unit for measuring environmental impacts that facilitates comparison with other studies. This conversion was based on mass balances and process efficiencies associated with the current once-through LWR fuel cycle. Total energy input is calculated at 8.7 x 10- 3 GJ(e)/MWh(e) of electricity and 5.9 x 10- 3 GJ(t)/MWh(e) of thermal energy. It is dominated by the energy required for uranium extraction, conversion to fluoride compound for subsequent enrichment, and enrichment. An estimate of the carbon footprint is made from the direct energy consumption at 1.7 kg CO2/MWh(e). Water use is likewise dominated by requirements of uranium extraction, totaling 154 L/MWh(e). Land use is calculated at 8 x 10- 3 m2/MWh(e), over 90% of which is due to uranium extraction. Quantified impacts are limited to those resulting from activities performed within the FEFC process facilities (i.e. within the plant gates). Energy embodied in material inputs such as process chemicals and fuel cladding is identified but not explicitly quantified in this study. Inclusion of indirect energy associated with embodied energy as well as construction and decommissioning of facilities could increase the FEFC energy intensity estimate by a factor of up to 2.

99 GENERAL AND MISCELLANEOUS↗