Search NASA⌕ Search

SEARCH · Search NASA

Results for “Computer software and hardware”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Shuttle automatic landing system

The Shuttle automatic landing system design requirements are discussed, the approach and landing flight phase is described, and the hardware and software subsystems are functionally described. Emphasis is placed on the complexity, flexibility, and criticality of the software function. The software structure, critical computational problems, and verification process as a subsystem are discussed. Finally, the hardware/software verification activities required before flight test of the autoland system are described, along with the results from two flight tests and the planned system certification to the operational flight boundaries.

Tsikalas, G.↗

Processor-controlled timing module for LORAN-C receiver

Hardware documentation is provided for the modified LORAN-C timing module, which uses direct software control in determining loop sample times. Computer loading is reduced by eliminating polled operation of the timing loop.

Lilley, R. W.↗

Processor-controlled timing module for Loran-C receiver

Hardware documentation is provided for the modified Loran-C timing module, which uses direct software control in determining loop sample times. Computer loading is reduced by eliminating polled operation of the timing loop.

Lilley, Robert W.↗

Improving the on-board computing capability of the NASA Multimission Modular Spacecraft

This paper presents the development of onboard computing improvements for NASA's Multimission Modular Spacecraft. The first MMS spacecraft being enhanced by an additional flight computer is the Explorer Platform. The selection process for both the flight hardware (MIL-STD-1750A Co-Processor) and flight software (Ada high level language) are discussed, followed by the lessons learned during the last three years.

Scott, Barbara↗

Platform-Independence and Scheduling In a Multi-Threaded Real-Time Simulation

Aviation research often relies on real-time, pilot-in-the-loop flight simulation as a means to develop new flight software, flight hardware, or pilot procedures. Often these simulations become so complex that a single processor is incapable of performing the necessary computations within a fixed time-step. Threads are an elegant means to distribute the computational work-load when running on a symmetric multi-processor machine. However, programming with threads often requires operating system specific calls that reduce code portability and maintainability. While a multi-threaded simulation allows a significant increase in the simulation complexity, it also increases the workload of a simulation operator by requiring that the operator determine which models run on which thread. To address these concerns an object-oriented design was implemented in the NASA Langley Standard Real-Time Simulation in C++ (LaSRS++) application framework. The design provides a portable and maintainable means to use threads and also provides a mechanism to automatically load balance the simulation models.

Sugden, Paul P.↗

Strain System for the Motion Base Shuttle Mission Simulator

The Motion Base Shuttle Mission Simulator (MBSMS) Strain System is an innovative engineering tool used to monitor the stresses applied to the MBSMS motion platform tilt pivot frames during motion simulations in real time. The Strain System comprises hardware and software produced by several different companies. The system utilizes a series of strain gages, accelerometers, orientation sensor, rotational meter, scanners, computer, and software packages working in unison. By monitoring and recording the inputs applied to the simulator, data can be analyzed if weld cracks or other problems are found during routine simulator inspections. This will help engineers diagnose problems as well as aid in repair solutions for both current as well as potential problems.

Huber, David C.↗

A neurocomputer based on an analog-digital hybrid architecture

A novel analog-digital hybrid architecture based on the utilization of high density digital random access memories for the storage of the synaptic weights of a neural network, and high speed analog hardware to perform neural computation is described. An electronic neurocomputer based on such an architecture is ideally suited for investigating the dynamics, associative recall properties, and computational capabilities of neural networks and provides significant speed improvement in comparison to conventional software based neural network simulations. As a demonstration of the feasibility of the hybrid architectural concept, a prototype breadboard hybrid neurocomputer system with 32 neurons has been designed and fabricated with off-the-shelf hardware components. The performance of the breadboard system has been tested for variety of applications including associative memory and combinatorial problem solving such as Graph Coloring, and is discussed in this paper.

Moopenn, A.↗

Cell-Detection Technique for Automated Patch Clamping

A unique and customizable machinevision and image-data-processing technique has been developed for use in automated identification of cells that are optimal for patch clamping. [Patch clamping (in which patch electrodes are pressed against cell membranes) is an electrophysiological technique widely applied for the study of ion channels, and of membrane proteins that regulate the flow of ions across the membranes. Patch clamping is used in many biological research fields such as neurobiology, pharmacology, and molecular biology.] While there exist several hardware techniques for automated patch clamping of cells, very few of those techniques incorporate machine vision for locating cells that are ideal subjects for patch clamping. In contrast, the present technique is embodied in a machine-vision algorithm that, in practical application, enables the user to identify good and bad cells for patch clamping in an image captured by a charge-coupled-device (CCD) camera attached to a microscope, within a processing time of one second. Hence, the present technique can save time, thereby increasing efficiency and reducing cost. The present technique involves the utilization of cell-feature metrics to accurately make decisions on the degree to which individual cells are "good" or "bad" candidates for patch clamping. These metrics include position coordinates (x,y) in the image plane, major-axis length, minor-axis length, area, elongation, roundness, smoothness, angle of orientation, and degree of inclusion in the field of view. The present technique does not require any special hardware beyond commercially available, off-the-shelf patch-clamping hardware: A standard patchclamping microscope system with an attached CCD camera, a personal computer with an imagedata- processing board, and some experience in utilizing imagedata- processing software are all that are needed. A cell image is first captured by the microscope CCD camera and image-data-processing board, then the image data are analyzed by software that implements the present machine-vision technique. This analysis results in the identification of cells that are "good" candidates for patch clamping (see figure). Once a "good" cell is identified, a patch clamp can be effected by an automated patchclamping apparatus or by a human operator. This technique has been shown to enable reliable identification of "good" and "bad" candidate cells for patch clamping. The ultimate goal in further development of this technique is to combine artificial-intelligence processing with instrumentation and controls in order to produce a complete "turnkey" automated patch-clamping system capable of accurately and reliably patch clamping cells with a minimum intervention by a human operator. Moreover, this technique can be adapted to virtually any cellular-analysis procedure that includes repetitive operation of microscope hardware by a human.

McDowell, Mark↗

A Multi-Architecture Approach for Implicit Computational Fluid Dynamics on Unstructured Grids

High-performance computing (HPC) architectures are trending toward manycore paradigms such as graphics processing units (GPUs). Approximately half of the top 100 publicly disclosed supercomputers in the world utilize GPU accelerators for performance. This is in contrast to a decade ago, where there were only a few such machines in the top 100. It is not currently possible to compile and run legacy central processing unit (CPU) software efficiently on GPUs without significant refactoring. Though a number of frameworks offering performance portability exist, none offer a standardized specification that is supported by all major hardware vendors. Additionally, experiences show that obtaining a high percentage of peak performance often requires architecture-specific code. This work details a pragmatic multi-architecture computational fluid dynamics library focused on aerospace problems across the speed range from low subsonic to hypersonic flows involving thermochemical nonequilibrium. A thin abstraction layer above NVIDIA CUDA C++ is utilized, which enables primarily single-source software currently capable of running efficiently on multicore CPUs, NVIDIA GPUs, AMD GPUs, and Intel GPUs. Results on various problems of interest across the speed range are presented and performance is compared between various architectures.

GPU↗

A Multi-Architecture Approach for Implicit Computational Fluid Dynamics on Unstructured Grids

High-performance computing (HPC) architectures are trending toward manycore paradigms such as graphics processing units (GPUs). Approximately half of the top 100 publicly disclosed supercomputers in the world utilize GPU accelerators for performance. This is in contrast to a decade ago, where there were only a few such machines in the top 100. It is not currently possible to compile and run legacy central processing unit (CPU) software efficiently on GPUs without significant refactoring. Though a number of frameworks offering performance portability exist, none offer a standardized specification that is supported by all major hardware vendors. Additionally, experiences show that obtaining a high percentage of peak performance often requires architecture-specific code. This work details a pragmatic multi-architecture computational fluid dynamics library focused on aerospace problems across the speed range from low subsonic to hypersonic flows involving thermochemical nonequilibrium. A thin abstraction layer above NVIDIA CUDA C++ is utilized, which enables primarily single-source software currently capable of running efficiently on multicore CPUs, NVIDIA GPUs, AMD GPUs, and Intel GPUs. Results on various problems of interest across the speed range are presented and performance is compared between various architectures.

GPU↗

A software simulation study of a (255,223) Reed-Solomon encoder-decoder

A set of software programs which simulates a (255,223) Reed-Solomon encoder/decoder pair is described. The transform decoder algorithm uses a modified Euclid algorithm, and closely follows the pipeline architecture proposed for the hardware decoder. Uncorrectable error patterns are detected by a simple test, and the inverse transform is computed by a finite field FFT. Numerical examples of the decoder operation are given for some test codewords, with and without errors. The use of the software package is briefly described.

Pollara, F.↗

Predicting Rocket or Jet Noise in Real Time

A semi-empirical theoretical model and a C++ computer program that implements the model have been developed for use in predicting the noise generated by a rocket or jet engine. The computer program, entitled the Realtime Rocket and Jet Engine Noise Analysis and Prediction Software, is one of two main subsystems of the Acoustic Prediction/Measurement Tool, which comprises software, acoustic instrumentation, and electronic hardware combined to afford integrated capabilities for real-time prediction and measurement of noise emitted by rocket and jet engines. [The other main subsystem, consisting largely of acoustic instrumentation and electronic hardware, is described in Wireless Acoustic Measurement System, which appears elsewhere in this section.] The theoretical model was derived from the fundamental laws of fluid mechanics, as first was done by M. J. Lighthill in his now famous theory of aerodynamically generated sound. The far-field approximation of the Lighthill theory is incorporated into this model. Many other contributions from various researchers have also been introduced into the model. The model accounts for two noise components: shear noise and self noise. The final result of the model is expressed in terms of a volume integral of the acoustic intensities attributable to these two components, subject to various directivity coefficients. The computer program was written to solve the volume integral. The inputs required by the program are two data files from a computational fluid dynamics (CFD) simulation of the flow of interest: the computational-grid file and the solution file. The CFD solution should be one that has been obtained for conditions that closely approximate those of an experimental test that is yet to be performed. In the current state of development of the model and software, it is recommended that the observation points lie along a radius at an angle >60 from the jet axis. The software provides, and is driven via, a graphical user interface, which facilitates its use. Optionally, the program accepts additional input in the form of data on the measured sound pressure level as a function of frequency at a given far-field location, preferably at an angle of 90 from the jet axis. The user is prompted to use default empirical constants or to choose constants based the measurement data. The user can view the results and compare them with other computational or experimental data. Once satisfied with the results, the user can save a graph of the results in a file that can be imported into documents.

Frendi, Kader↗

A procedure for automated land use mapping using remotely sensed multispectral scanner data

A system of processing remotely sensed multispectral scanner data by computer programs to produce color-coded land use maps for large areas is described. The procedure is explained, the software and the hardware are described, and an analogous example of the procedure is presented. Detailed descriptions of the multispectral scanners currently in use are provided together with a summary of the background of current land use mapping techniques. The data analysis system used in the procedure and the pattern recognition software used are functionally described. Current efforts by the NASA Earth Resources Laboratory to evaluate operationally a less complex and less costly system are discussed in a separate section.

Whitley, S. L.↗

SMS crew station (C and D panels and forward structures). CEI part 1: Detail specification, type 1 data

Established are the requirements for performance, design, test and qualification of one type of equipment identified as SMS C&D panels and forward structures. This CEI is used to provide all hardware and wiring necessary for the C&D panels to be properly interfaced with the computer complex/signal conversion equipment (SCE), crew station, and software requirements as defined in other CEI specifications.

Source record↗

Detecting servo failures with software

Program detects hardware failure in servosystems by comparing actual servo valve position with predictions of software model. In addition, system will also pick up most computer input/output failures. Process presents faster and more reliable results than previous failure detection methods.

Lew, D.↗

Lessons learned in creating spacecraft computer systems: Implications for using Ada (R) for the space station

Twenty-five years of spacecraft onboard computer development have resulted in a better understanding of the requirements for effective, efficient, and fault tolerant flight computer systems. Lessons from eight flight programs (Gemini, Apollo, Skylab, Shuttle, Mariner, Voyager, and Galileo) and three reserach programs (digital fly-by-wire, STAR, and the Unified Data System) are useful in projecting the computer hardware configuration of the Space Station and the ways in which the Ada programming language will enhance the development of the necessary software. The evolution of hardware technology, fault protection methods, and software architectures used in space flight in order to provide insight into the pending development of such items for the Space Station are reviewed.

Tomayko, James E.↗

A control architecture for a Mars walking vehicle

A design framework for a Mars Rover, intended for missions where a high degree of autonomy is dictated, is presented. The framework provides a logical computing architecture for rover mobility and local navigation subsystem design by defining a set of functional modules and interfaces to facilitate software and hardware specification. The similarities and dissimilarities between the present approach and related architectures for autonomous navigation and robotic control are discussed. An approach is presented for specifying actions to be taken by the mobility and local navigation subsystems of the rover.

Spiessbach, Andrew J.↗

Proceedings of the 1993 Conference on Intelligent Computer-Aided Training and Virtual Environment Technology, Volume 1

These proceedings are organized in the same manner as the conference's contributed sessions, with the papers grouped by topic area. These areas are as follows: VE (virtual environment) training for Space Flight, Virtual Environment Hardware, Knowledge Aquisition for ICAT (Intelligent Computer-Aided Training) & VE, Multimedia in ICAT Systems, VE in Training & Education (1 & 2), Virtual Environment Software (1 & 2), Models in ICAT systems, ICAT Commercial Applications, ICAT Architectures & Authoring Systems, ICAT Education & Medical Applications, Assessing VE for Training, VE & Human Systems (1 & 2), ICAT Theory & Natural Language, ICAT Applications in the Military, VE Applications in Engineering, Knowledge Acquisition for ICAT, and ICAT Applications in Aerospace.

Hyde, Patricia R.↗