Search NASA⌕ Search

SEARCH · Search NASA

Results for “Data Computing Interface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

A software system for laser design and analysis

A laser-material database and laser-modeling software system for designing lasers for laser-based Light Detection And Ranging (LIDAR) systems are presented. The software system consists of three basic sections: the database, laser models, and interface software. The database contains the physical parameters of laser, optical, and nonlinear materials required by laser models. The models include efficiency calculations, electrooptical component models, resonator, amplifier, and oscillator models, and miscellaneous models. The interface software provides a user-friendly interface between the user and his personal data files, the database, and models. The structure of the software system is essentially in place, while future plans call for upgrading the computer hardware and software in order to support a multiuser multitask environment.

Cross, P. L.↗
NASA NTRS1991

An improved error analysis of finite element solutions for postbuckled plates

The accurate calculation of stresses at boundaries and interfaces where FEM analysis may be unreliable is presently undertaken by an error analysis that derives a continuous approximation to discrete finite-element data, which can be differentiated to compute continuous stresses for component-failure predictions. An evaluation is conducted of this approximation in the context of the nonlinear PDEs. A novel interpolation formula which is a simple modification of the double Fourier sine series is used to reduce truncation errors near the rectangular plate boundary by means of an 'extended grid'. Results are presented from a FEM solution, a conventional double-Fourier series' continuous approximation, and a solution applying interpolation on the extended grid, which yields superior convergence properties near the plate boundaries.

Sistla, Rajaram↗
NASA NTRS1994

Implementation of a low-cost, commercial orbit determination system

This paper describes the implementation and potential applications of a workstation-based orbit determination system developed by Storm Integration, Inc. called the Precision Orbit Determination System (PODS). PODS is offered as a layered product to the commercially-available Satellite Tool Kit (STK) produced by Analytical Graphics, Inc. PODS also incorporates the Workstation/Precision Orbit Determination (WS/POD) product offered by Van Martin System, Inc. The STK graphical user interface is used to access and invoke the PODS capabilities and to display the results. WS/POD is used to compute a best-fit solution to user-supplied tracking data. PODS provides the capability to simultaneously estimate the orbits of up to 99 satellites based on a wide variety of observation types including angles, range, range rate, and Global Positioning System (GPS) data. PODS can also estimate ground facility locations, Earth geopotential model coefficients, solar pressure and atmospheric drag parameters, and observation data biases. All determined data is automatically incorporated into the STK data base, which allows storage, manipulation and export of the data to other applications. PODS is offered in three levels: Standard, Basic GPS and Extended GPS. Standard allows processing of non-GPS observation types for any number of vehicles and facilities. Basic GPS adds processing of GPS pseudo-ranging data to the Standard capabilities. Extended GPS adds the ability to process GPS carrier phase data.

Corrigan, Jim↗
NASA NTRS2016

High Data Rate Architecture (HiDRA)

One of the greatest challenges in developing new space technology is in navigating the transition from ground based laboratory demonstration at Technology Readiness Level 6 (TRL-6) to conducting a prototype demonstration in space (TRL-7). This challenge is com- pounded by the relatively low availability of new spacecraft missions when compared with aeronautical craft to bridge this gap, leading to the general adoption of a low-risk stance by mission management to accept new, unproven technologies into the system. Also in consideration of risk, the limited selection and availability of proven space-grade components imparts a severe limitation on achieving high performance systems by current terrestrial technology standards. Finally from a space communications point of view the long duration characteristic of most missions imparts a major constraint on the entire space and ground network architecture, since any new technologies introduced into the system would have to be compliant with the duration of the currently deployed operational technologies, and in some cases may be limited by surrounding legacy capabilities. Beyond ensuring that the new technology is verified to function correctly and validated to meet the needs of the end users the formidable challenge then grows to additionally include: carefully timing the maturity path of the new technology to coincide with a feasible and accepting future mission so it flies before its relevancy has passed, utilizing a limited catalog of available components to their maximum potential to create meaningful and unprecedented new capabilities, designing and ensuring interoperability with aging space and ground infrastructures while simultaneously providing a growth path to the future. The International Space Station (ISS) is approaching 20 years of age. To keep the ISS relevant, technology upgrades are continuously taking place. Regarding communications, the state-of-the-art communication system upgrades underway include high-rate laser terminals. These must interface with the existing, aging data infrastructure. The High Data Rate Architecture (HiDRA) project is designed to provide networked store, carry, and forward capability to optimize data flow through both the existing radio frequency (RF) and new laser communications terminal. The networking capability is realized through the Delay Tolerant Networking (DTN) protocol, and is used for scheduling data movement as well as optimizing the performance of existing RF channels. HiDRA is realized as a distributed FPGA memory and interface controller that is itself controlled by a local computer running DTN software. Thus HiDRA is applicable to other arenas seeking to employ next-generation communications technologies, e.g. deep space. In this paper, we describe HiDRA and its far-reaching research implications.

DTN↗
NASA NTRSDate not supplied

Watching Without Seeing a Tool to Surveil Astronaut Health Outcomes While Maintaining Astronaut Medical Privacy

BACKGROUND The Privacy Act of 1974 regulates the use a nd disclosure of personally identifiable information by US Federal agencies. The Act applies to biographical, financial, a nd other identity-linked information, a s well a s personal health information (PHI). As such, the use of astronaut PHI is limited to authorized personnel for preapproved uses, with data reporting often limited to aggregated information about groups. These limitations on the use a nd reporting of astronaut PHI complicates surveillance efforts, wherein epidemiologists a t the National Aeronautics and Space Administration (NASA)monitor the incidence of targeted health conditions in the astronaut population, or to discover emerging trends of aging and disease. Stratification on one or more covariates –particularly time-period, sex, a nd mission participation –can lead to extremely small datasets such that the reporting of results is potentially attributable to individuals. An additional challenge is the small size of the astronaut population, both in terms of numbers of individuals a s well a s in terms of density of exposure time. Such small datasets yield volatile rate estimates that are difficult to interpret. To a id the epidemiological surveillance efforts, a surveillance tool is required that can (a) satisfy the need for rapid computation of condition-specific incidence and mortality rates; (b) improve the statistical estimates of these estimated rates; and (c) maintain astronaut privacy. Here we describe a nd demonstrate such a tool. METHODS We devised a system that models incidence a nd mortality rates rather than calculating them directly. This ha s the advantage of using all the available data to derive the estimates, lea ding to rates that a re not attributable to any one individual, a nd a re a s numerically stable a s they can be given the extremely limited data. The system models disease endpoints using a Poisson regression model with exposure density (measured in person-years) a s a n offset term. By doing so the model is estimating event counts per person-year, equivalent to modeling the rates directly. It uses a standard (pre-specified)set of covariates; the system does not engage in “model-building” as model parsimony is not the goa l. Instead, it is explicitly recognized that if a covariate is not statistically significant a nd not a confounder then it will likely have very little effect on the estimate of the incidence a nd mortality rates. Users are able to specify the disease endpoint of interest and the covariates over which they would like to stratify. The system then uses the resulting model to compute the estimated rates for the user-chosen configuration of variables as visualizes those either over an age range within a specified time-period, or over time for astronauts with a specified age range. RESULTS The first iteration of the tool computes incidence a nd mortality rates for cardiovascular conditions and cancers. Code ha s been developed to retrieve the appropriate data from the IMPALA analysis platform, compute the models for incidence a nd mortality, a nd then use those models to generate the corresponding rate curves. A companion graphical user interface allows the user to specify the curves and visualize the results. CONCLUSIONS It is important to note that the rapid surveillance tool described here is neither meant to be a definitive assessment of the incidence or mortality of any particular disease or condition in the astronaut population, nor is it meant to be used for research purposes. Rather, it is meant as an early indicator that in-depth investigation may be warranted. By automating a repetitive process and leveraging carefully curated astronaut health outcomes, the tool makes possible a rapid “first look” into known areas of concern, and, if used judiciously, may surface new areas of concern for long-term astronaut health. This work is supported in part by the Translational Research Institute for Space Health (TRISH) through NASA Cooperative Agreement NNX16AO69A.

R J Reynolds↗
NASA NTRS1974

MIDAS, prototype Multivariate Interactive Digital Analysis System, Phase 1. Volume 2: Diagnostic system

The MIDAS System is a third-generation, fast, multispectral recognition system able to keep pace with the large quantity and high rates of data acquisition from present and projected sensors. A principal objective of the MIDAS Program is to provide a system well interfaced with the human operator and thus to obtain large overall reductions in turn-around time and significant gains in throughout. The hardware and software generated in Phase I of the over-all program are described. The system contains a mini-computer to control the various high-speed processing elements in the data path and a classifier which implements an all-digital prototype multivariate-Gaussian maximum likelihood decision algorithm operating 2 x 105 pixels/sec. Sufficient hardware was developed to perform signature extraction from computer-compatible tapes, compute classifier coefficients, control the classifier operation, and diagnose operation. Diagnostic programs used to test MIDAS' operations are presented.

Kriegler, F. J.↗
NASA NTRS2013

Characterizing Facesheet/Core Disbonding in Honeycomb Core Sandwich Structure

Results are presented from an experimental investigation into facesheet core disbonding in carbon fiber reinforced plastic/Nomex honeycomb sandwich structures using a Single Cantilever Beam test. Specimens with three, six and twelve-ply facesheets were tested. Specimens with different honeycomb cores consisting of four different cell sizes were also tested, in addition to specimens with three different widths. Three different data reduction methods were employed for computing apparent fracture toughness values from the test data, namely an area method, a compliance calibration technique and a modified beam theory method. The compliance calibration and modified beam theory approaches yielded comparable apparent fracture toughness values, which were generally lower than those computed using the area method. Disbonding in the three-ply facesheet specimens took place at the facesheet/core interface and yielded the lowest apparent fracture toughness values. Disbonding in the six and twelve-ply facesheet specimens took place within the core, near to the facesheet/core interface. Specimen width was not found to have a significant effect on apparent fracture toughness. The amount of scatter in the apparent fracture toughness data was found to increase with honeycomb core cell size.

Rinker, Martin↗
NASA NTRS2009

Airborne Antenna System for Minimum-Cycle-Slip GPS Reception

A system that includes a Global Positioning System (GPS) antenna and associated apparatus for keeping the antenna aimed upward has been developed for use aboard a remote-sensing-survey airplane. The purpose served by the system is to enable minimum- cycle-slip reception of GPS signals used in precise computation of the trajectory of the airplane, without having to restrict the airplane to maneuvers that increase the flight time needed to perform a survey. Cycle slip signifies loss of continuous track of the phase of a signal. Minimum-cycle-slip reception is desirable because maintaining constant track of the phase of the carrier signal from each available GPS satellite is necessary for surveying to centimeter or subcentimeter precision. Even a loss of signal for as short a time as a nanosecond can cause cycle slip. Cycle slips degrade the quality and precision of survey data acquired during a flight. The two principal causes of cycle slip are weakness of signals and multipath propagation. Heretofore, it has been standard practice to mount a GPS antenna rigidly on top of an airplane, and the radiation pattern of the antenna is typically hemispherical, so that all GPS satellites above the horizon are viewed by the antenna during level flight. When the airplane must be banked for a turn or other maneuver, the reception hemisphere becomes correspondingly tilted; hence, the antenna no longer views satellites that may still be above the Earth horizon but are now below the equatorial plane of the tilted reception hemisphere. Moreover, part of the reception hemisphere (typically, on the inside of a turn) becomes pointed toward ground, with a consequent increase in received noise and, therefore, degradation of GPS measurements. To minimize the likelihood of loss of signal and cycle slip, bank angles of remote-sensing survey airplanes have generally been limited to 10 or less, resulting in skidding or slipping uncoordinated turns. An airplane must be banked in order to make a coordinated turn. For small-radius, short-time coordinated turns, it is necessary to employ banks as steep as 45 , and turns involving such banks are times and for confining airplanes as closely as possible to areas to be surveyed. The idea underlying the design is that if the antenna can be kept properly aimed, then the incidence of cycle slips caused by loss or weakness of signals can be minimized. The system includes an articulating GPS antenna and associated electronic circuitry mounted under a radome atop an airplane. The electronic circuitry includes a microprocessor-based interface-circuit-and-data-translation module. The system receives data on the current attitude of the airplane from the inertial navigation system of the airplane. The microprocessor decodes the attitude data and uses them to compute commands for the GPS-antenna-articulating mechanism to tilt the antenna, relative to the airplane, in opposition to the roll or bank of the airplane to keep the antenna pointed toward the zenith. The system was tested aboard the hurricane- hunting airplane of the National Oceanic and Atmospheric Administration (NOAA) [see figure] during an 11-hour flight to observe the landfall of Hurricane Bret in late summer of 1999. No bank-angle restrictions were imposed during the flight. Post-flight analysis of the GPS trajectory data revealed that no cycle slip had occurred.considered normal maneuvers. These steep banks are highly desirable for minimizing flight

Wright, C. Wayne↗
NASA NTRS2015

Applied Operations Research: Augmented Reality in an Industrial Environment

Augmented reality is the application of computer generated data or graphics onto a real world view. Its use provides the operator additional information or a heightened situational awareness. While advancements have been made in automation and diagnostics of high value critical equipment to improve readiness, reliability and maintenance, the need for assisting and support to Operations and Maintenance staff persists. AR can improve the human machine interface where computer capabilities maximize the human experience and analysis capabilities. NASA operates multiple facilities with complex ground based HVCE in support of national aerodynamics and space exploration, and the need exists to improve operational support and close a gap related to capability sustainment where key and experienced staff consistently rotate work assignments and reach their expiration of term of service. The initiation of an AR capability to augment and improve human abilities and training experience in the industrial environment requires planning and establishment of a goal and objectives for the systems and specific applications. This paper explored use of AR in support of Operation staff in real time operation of HVCE and its maintenance. The results identified include identification of specific goal and objectives, challenges related to availability and computer system infrastructure.

Cole, Stuart K.↗
NASA NTRS2011

Digital Interface Board to Control Phase and Amplitude of Four Channels

An increasing number of parts are designed with digital control interfaces, including phase shifters and variable attenuators. When designing an antenna array in which each antenna has independent amplitude and phase control, the number of digital control lines that must be set simultaneously can grow very large. Use of a parallel interface would require separate line drivers, more parts, and thus additional failure points. A convenient form of control where single-phase shifters or attenuators could be set or the whole set could be programmed with an update rate of 100 Hz is needed to solve this problem. A digital interface board with a field-programmable gate array (FPGA) can simultaneously control an essentially arbitrary number of digital control lines with a serial command interface requiring only three wires. A small set of short, high-level commands provides a simple programming interface for an external controller. Parity bits are used to validate the control commands. Output timing is controlled within the FPGA to allow for rapid update rates of the phase shifters and attenuators. This technology has been used to set and monitor eight 5-bit control signals via a serial UART (universal asynchronous receiver/transmitter) interface. The digital interface board controls the phase and amplitude of the signals for each element in the array. A host computer running Agilent VEE sends commands via serial UART connection to a Xilinx VirtexII FPGA. The commands are decoded, and either outputs are set or telemetry data is sent back to the host computer describing the status and the current phase and amplitude settings. This technology is an integral part of a closed-loop system in which the angle of arrival of an X-band uplink signal is detected and the appropriate phase shifts are applied to the Ka-band downlink signal to electronically steer the array back in the direction of the uplink signal. It will also be used in the non-beam-steering case to compensate for phase shift variations through power amplifiers. The digital interface board can be used to set four 5-bit phase shifters and four 5-bit attenuators and monitor their current settings. Additionally, it is useful outside of the closed-loop system for beamsteering alone. When the VEE program is started, it prompts the user to initialize variables (to zero) or skip initialization. After that, the program enters into a continuous loop waiting for the telemetry period to elapse or a button to be pushed. A telemetry request is sent when the telemetry period is elapsed (every five seconds). Pushing one of the set or reset buttons will send the appropriate command. When a command is sent, the interface status is returned, and the user will be notified by a pop-up window if any error has occurred. The program runs until the End Program button is depressed.

Smith, Amy E.↗
NASA NTRS2015

Tactile Data Entry System

The patent-pending Glove-Enabled Computer Operations (GECO) design leverages extravehicular activity (EVA) glove design features as platforms for instrumentation and tactile feedback, enabling the gloves to function as human-computer interface devices. Flexible sensors in each finger enable control inputs that can be mapped to any number of functions (e.g., a mouse click, a keyboard strike, or a button press). Tracking of hand motion is interpreted alternatively as movement of a mouse (change in cursor position on a graphical user interface) or a change in hand position on a virtual keyboard. Programmable vibro-tactile actuators aligned with each finger enrich the interface by creating the haptic sensations associated with control inputs, such as recoil of a button press.

Adams, Richard J.↗
NASA NTRS1977

Computer-aided analysis of LANDSAT data for surveying Texas coastal zone environments

The author has identified the following significant results. The study areas were Pass Cavallo and Port O'Connor. The following terrestrial and aquatic environments were discriminated: alternating beach ridges, swales, sand dunes, beach birms, deflation surfaces, land-water interface, urban, spoil areas, fresh and salt water marshes, grass and woodland, recently burned or grazed areas, submerged vegetation, and waterways.

Kristof, S. J.↗
NASA NTRS1979

Study of the Effects of Impurities on the Properties of Silicon Materials and Performance of Silicon Solar Cell

Numerical solutions were obtained from the exact one dimensional transmission line circuit model to study the following effects on the terrestrial performance of silicon solar cells: interband Auger recombination; surface recombination at the contact interfaces; enhanced metallic impurity solubility; diffusion profiles; and defect-impurity recombination centers. Thermal recombination parameters of titanium impurity in silicon were estimated from recent experimental data. Based on those parameters, computer model calculations showed that titanium concentration must be kept below 6x10 to the 12th power Ti/cu cm in order to achieve 16% AM1 efficiency in a silicon solar cell of 250 micrometers thick and 1.5 ohm-cm resistivity.

Sah, C. T.↗
NASA NTRS1978

Reconfigurable modular computer networks for spacecraft on-board processing

The core electronics subsystems on unmanned spacecraft, which have been sent over the last 20 years to investigate the moon, Mars, Venus, and Mercury, have progressed through an evolution from simple fixed controllers and analog computers in the 1960's to general-purpose digital computers in current designs. This evolution is now moving in the direction of distributed computer networks. Current Voyager spacecraft already use three on-board computers. One is used to store commands and provide overall spacecraft management. Another is used for instrument control and telemetry collection, and the third computer is used for attitude control and scientific instrument pointing. An examination of the control logic in the instruments shows that, for many, it is cost-effective to replace the sequencing logic with a microcomputer. The Unified Data System architecture considered consists of a set of standard microcomputers connected by several redundant buses. A typical self-checking computer module will contain 23 RAMs, two microprocessors, one memory interface, three bus interfaces, and one core building block.

Rennels, D. A.↗
NASA NTRS1982

Environmentally induced discharges on satellites

A discharge process whose trigger conditions are a negative exposed metallic surface surrounded by a less negative dielectric, and a large voltage gradient at a dielectric/metal interface is proposed. Analysis of SCATHA data for a discharge substantiates the postulation. Surface discharges cause a small transient charge transfer to space which results in voltage transients. A method of computing these transients, based on the charge lost through the capacitance to space and a fraction of charge stored in the dielectric at the discharge source was developed. It gives an estimate of the discharge transients at the discharge site, which is used as input for coupling code analysis of structure/system response. The transient computations were applied to a three-axis stabilized, geosynchronous satellite for both sunlight and eclipse charging. The energy of the transient pulses are about 1 mJ for sunlight discharge and 8 mJ for eclipse. Changing of selected coatings on the satellite would relieve the stress.

Stevens, N. J.↗
NASA NTRS1987

Three-dimensional unsteady Euler solutions for propfans and counter-rotating propfans in transonic flow

An Euler code designed for computing the unsteady, three-dimensional, transonic flow about single-rotating and counter-rotating propfans using dynamic blocked-grids is presented. The algorithm is a finite volume, flux-split, upwind, implicit scheme and solves the equations which have been written in a time-dependent curvilinear coordinate system. Relative motion of the blades for counter-rotating configurations is handled by requiring that grid lines be aligned after each discrete rotation of fore and aft rotor grid blocks. The method by which information is passed across block interfaces, as well as how downstream characteristic outflow boundary conditions which enforce simple radial equilibrium are implemented, is discussed. Comparisons of computed flow-field parameters and propfan performance with experimental data indicate good overall agreement between predictions and measurements.

Whitfield, D. L.↗
NASA NTRS1992

Error analysis of finite element results on plates with nonuniform grids

Discrete Dirac delta functions in two dimensions and the governing plate differential equations are used to produce continuous approximations from discrete finite-element data on nonuniform grids. The resulting continuous approximation when compared to the discrete data provides an error analysis. Moreover, the continuous approximation can be differentiated to compute continuous stresses needed for component failure prediction. Stresses can then be calculated accurately at boundaries and at interfaces where finite-element analysis alone may not provide reliable results. The continuous solution along with the differential equations also provides a residual error which is used in the error analysis. This is a unique feature of this approach. Two application examples of the procedure are provided. One example involves the linear response of a clamped square plate under uniform transverse load. Results from finite-element analysis and the continuous solution from the present analysis are compared to a closed-form elasticity solution. The continuous solution is used in a Zienkiewicz-Zhu error estimator to assess the performance of the present analysis. The continuous solution is observed to dramatically correct the finite-element results. In a second example, results for the nonlinear response of a stiffened panel are compared to the finite-element solution.

Sistla, Rajaram↗
NASA NTRS1994

Single Stage Rocket Technology's real time data system

The Single Stage Rocket Technology (SSRT) Delta Clipper Experimental (DC-X) Program is a United States Air Force Ballistic Missile Defense Organization (BMDO) rapid prototyping initiative that is currently demonstrating technology readiness for reusable suborbital rockets. The McDonnell Douglas DC-X rocket performed technology demonstrations at the U.S. Army White Sands Missile Range in New Mexico from April-October in 1993. The DC-X Flight Operations Control Center (FOCC) contains the ground control system that is used to monitor and control the DC-X vehicle and its Ground Support Systems (GSS). The FOCC is operated by a flight crew of three operators. Two operators manage the DC-X Flight Systems and one operator is the Ground Systems Manager. A group from McDonnell Douglas Aerospace at KSC developed the DC-X ground control system for the FOCC. This system is known as the Real Time Data System (RTDS). The RTDS is a distributed real time control and monitoring system that utilizes the latest available commercial off-the-shelf computer technology. The RTDS contains front end interfaces for the DC-X RF uplink/downlink and fiber optic interfaces to the GSS equipment. This paper describes the RTDS architecture and FOCC layout. The DC-X applications and ground operations are covered.

Voglewede, Steven D.↗