Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dimensionless Numbers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

The Trojan Horse Method as a tool to investigate low-energy resonances: the {sup 18}O(p, {alpha}){sup 15}N and {sup 17}O(p, {alpha}){sup 14}N cases

The {sup 18}O(p, {alpha}){sup 15}N and {sup 17}O(p, {alpha}){sup 14}N reactions are of primary importance in several as-trophysical scenarios, including nucleosynthesis inside Asymptotic Giant Branch stars and oxygen and nitrogen isotopic ratios in meteorite grains. They are also key reactions to understand exotic systems such as R-Coronae Borealis stars and novae. Thus, the measurement of their cross sections in the low energy region can be crucial to reduce the nuclear uncertainty on theoretical predictions, because the resonance parameters are poorly determined. The Trojan Horse Method, in its newly developed form particularly suited to investigate low-energy resonances, has been applied to the {sup 2}H({sup 18}O, {alpha}{sup 15}N)n and {sup 2}H({sup 17}O, {alpha}{sup 14}N)n reactions to deduce the {sup 18}O(p, {alpha}){sup 15}N and {sup 17}O(p, {alpha}){sup 14}N cross sections at low energies. Resonances in the {sup 18}O(p, {alpha}){sup 15}N and {sup 17}O(p, {alpha}){sup 14}N excitation functions have been studied and the resonance parameters deduced.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Homobuffer thickness effect on the background electron carrier concentration of epitaxial ZnO thin films

Epitaxial ZnO thin films were grown on r-plane sapphire substrates using plasma-assisted molecular-beam epitaxy. ZnO homobuffer layers grown at a lower temperature were introduced to improve the crystallinity of the top ZnO thin films. Thicker homobuffer layers lead to better crystallinity of the subsequent epitaxial ZnO thin films due to the strain relaxation effect. Residual background electron carrier concentration in these undoped ZnO thin films first decreases, then increases as the buffer layer thickness increases from {approx}1 to 30 nm, with a minimum electron concentration of {approx}1x10{sup 17} cm{sup -3} occurring in ZnO homobuffer of {approx}5 nm. These results demonstrate that the optimized ZnO homobuffer thickness to achieve both good ZnO crystallinity and low residual electron concentration is determined by the relative electron carrier concentration ratios and mobility ratios between the buffer and epi-ZnO layers.

36 MATERIALS SCIENCE↗

Low gap amorphous GaN{sub 1-x}As{sub x} alloys grown on glass substrate

Amorphous GaN{sub 1-x}As{sub x} layers with As content in the range of x=0.1 to 0.6 were grown by molecular beam epitaxy on Pyrex glass substrate. These alloys exhibit a wide range of band gap values from 2.2 to 1.3 eV. We found that the density of the amorphous films is {approx}0.8-0.85 of their corresponding crystalline value. These amorphous films have smooth morphology, homogeneous composition, and sharp well defined optical absorption edges. The measured band gap values for the crystalline and amorphous GaN{sub 1-x}As{sub x} alloys are in excellent agreement with the predictions of the band anticrossing model. The high absorption coefficient of {approx}10{sup 5} cm{sup -1} for the amorphous GaN{sub 1-x}As{sub x} films suggests that relatively thin films (on the order of 1 {mu}m) are necessary for photovoltaic application.

36 MATERIALS SCIENCE↗

Phase diagram and electrostrictive properties of Bi{sub 0.5}Na{sub 0.5}TiO{sub 3}-BaTiO{sub 3}-K{sub 0.5}Na{sub 0.5}NbO{sub 3} ceramics

Phase diagram of Bi{sub 0.5}Na{sub 0.5}TiO{sub 3}-BaTiO{sub 3}-K{sub 0.5}Na{sub 0.5}NbO{sub 3} ternary system has been analyzed and (0.94-x)BNT-0.06BT-xKNN (0.15{<=}x{<=}0.30) ceramics have been prepared and investigated. Pseudocubic structures were confirmed by x-ray diffractions and its preliminary Rietveld refinements. P-E, S-E, and S-P{sup 2} profiles (where P, E, and S denote polarization, electric field, and strain, respectively) indicate electrostrictive behavior of all ceramics. The compositions with x=0.20 and 0.25 show pure electrostrictive characteristics. The dissipation energy, electrostrictive strain, and electrostrictive coefficient have been determined and compared with other lead-free and lead-containing electrostrictors. The electrostrictive coefficient can reach as high as 0.026 m{sup 4}/C{sup 2}, about 1.5 times of the value of traditional Pb-based electrostrictors.

36 MATERIALS SCIENCE↗

Electrical properties and stability of p-type ZnO film enhanced by alloying with S and heavy doping of Cu

Single wurtzite p-type Zn{sub 1-y}Cu{sub y}O{sub 1-x}S{sub x} alloy films with 0.081{<=}x{<=}0.186 and 0.09{<=}y{<=}0.159 were grown on quartz reproducibly by magnetron sputtering. The alloys show very stable p-type conductivity with a hole concentration of 4.31-5.78x10{sup 19} cm{sup -3}, a resistivity of 0.29-0.34 {Omega} cm and a mobility of 0.32-0.49 cm{sup 2} V{sup -1} s{sup -1}. The p-type conductivity is attributed to substitution of Cu{sup +1} for the Zn site, and the ionization energy of the Cu{sup +1} acceptor is measured to be 53 meV, much less than that of Cu-doped ZnO reported previously. The small ionization energy is due to Cu heavy doping and increase in valence band maximum of ZnO induced by alloying with S.

36 MATERIALS SCIENCE↗

Three-dimensional structure of electron density fluctuations in the Hall thruster plasma: ExB mode

Collective scattering measurements have been conducted on the plasma of a Hall thruster, in which the electron density fluctuations are fully characterized by the dynamic form factor. The dynamic form factor amplitude distribution has been measured depending on the k-vector spatial and frequency components at different locations. Fluctuations are seen as propagating waves. The largest amplitude mode propagates nearly along the cross-field direction but at a phase velocity that is much smaller than the ExB drift velocity. Refined directional analysis of this largest amplitude mode shows a thin angular emission diagram with a mean direction that is not strictly along the ExB direction but at small angles near it. The deviation is oriented toward the anode in the (E,ExB) plane and toward the exterior of the thruster channel in the (B,ExB) plane. The density fluctuation rate is on the order of 1%. These experimentally determined directional fluctuation characteristics are discussed with regard to the linear kinetic theory model and particle-in-cell simulation results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Mach reflection in a warm dense plasma

The phenomenon of irregular shock-wave reflection is of importance in high-temperature gas dynamics, astrophysics, inertial-confinement fusion, and related fields of high-energy-density science. However, most experimental studies of irregular reflection have used supersonic wind tunnels or shock tubes, and few or no data are available for Mach reflection phenomena in the plasma regime. Similarly, analytic studies have often been confined to calorically perfect gases. We report the first direct observation, and numerical modeling, of Mach stem formation for a warm, dense plasma. Two ablatively driven aluminum disks launch oppositely directed, near-spherical shock waves into a cylindrical plastic block. The interaction of these shocks results in the formation of a Mach-ring shock that is diagnosed by x-ray backlighting. The data are modeled using radiation hydrocodes developed by AWE and LANL. The experiments were carried out at the University of Rochester's Omega laser [J. M. Soures, R. L. McCrory, C. P. Verdon et al., Phys. Plasmas 3, 2108 (1996)] and were inspired by modeling [A. M. Khokhlov, P. A. Hoeflich, E. S. Oran et al., Astrophys J. 524, L107 (1999)] of core-collapse supernovae that suggest that in asymmetric supernova explosion significant mass may be ejected in a Mach-ring formation launched by bipolar jets.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

GaN{sub 1-x}Bi{sub x}: Extremely mismatched semiconductor alloys

Through nonequilibrium low-temperature molecular beam epitaxy, we have grown GaN{sub 1-x}Bi{sub x} alloys on sapphire substrates with x up to 0.11. The GaN{sub 1-x}Bi{sub x} alloys are found to be amorphous with GaN crystals distributed throughout the film. A dramatic reduction in the optical band gap from 3.4 eV in GaN to as low as 1.2 eV for x{approx}0.11 was qualitatively explained by formation of a narrow band originating from anticrossing interaction between Bi localized states and the extended states of the GaN matrix.

36 MATERIALS SCIENCE↗

Luminescence of Ce{sup 3+} at two different sites in {alpha}-Sr{sub 2}P{sub 2}O{sub 7} under vacuum ultraviolet-UV and x-ray excitation

A series of Ce{sup 3+} doped {alpha}-Sr{sub 2-2x}Ce{sub x}Na{sub x}P{sub 2}O{sub 7} phosphor compounds has been prepared using a high-temperature solid-state reaction technique. The luminescence properties under vacuum ultraviolet-UV and x-ray excitation were studied. Luminescence spectra reveal three UV-emitting peaks at about 310, 330, and 350 nm from which we conclude that Ce{sup 3+} occupies two distinct sites in {alpha}-Sr{sub 2}P{sub 2}O{sub 7}. The influences of the doping concentration, the temperature, and the excitation wavelength on the luminescence of Ce{sup 3+} at the Ce(I) and Ce(II) sites together with the decay characteristics are discussed. The light yield under x-ray excitation is found to be around 10 000 photons/MeV.

36 MATERIALS SCIENCE↗

Evidence of inverse bremsstrahlung in laser enhanced laser-induced plasma

Plasmas created by a Nd:yttrium aluminum garnet laser show systematic changes in local electron temperature when bathed by a continuous wave laser of increasing irradiance. By monitoring the local electron density, the laser light absorption coefficient, and the signal to noise ratio in neutral emissions, we explain the changes in electron temperature and signal to noise to be a consequence of inverse bremsstrahlung in this new system of laser enhanced laser-induced plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Deep-ultraviolet photodetectors from epitaxially grown Ni{sub x}Mg{sub 1-x}O

Deep-ultraviolet (DUV) photodetectors were fabricated from high quality Ni{sub x}Mg{sub 1-x}O epitaxially grown by plasma-assisted molecular beam epitaxy on an approximately lattice matched MgO <100> substrate. A mid-range Ni composition (x=0.54) Ni{sub x}Mg{sub 1-x}O film was grown for DUV ({lambda}{sub peak}<300 nm) photoresponse and the film was characterized by reflected high-energy electron diffraction, Rutherford backscattering spectroscopy, x-ray diffraction, and optical transmission measurements. Photoconductive detectors were then fabricated by deposition of symmetric interdigitated contacts (10 nm Pt/150 nm Au) with contact separations of 5, 10, and 15 {mu}m. The detectors exhibited peak responsivities in the DUV ({lambda}{sub peak{approx_equal}}250 nm) as high as 12 mA/W, low dark currents (I{sub dark}<25 nA), and DUV:visible rejection ratio of approximately 800:1.

36 MATERIALS SCIENCE↗

A Comparative Study on AC Conductivity and Dielectric Behavior of Multiwalled Carbon Nanotubes and Polyaniline Coated Multiwalled Carbon Nanotubes Filled High Density Polyethylene-Carbon Black Nanocomposites

This paper presents an experimental investigation on AC conductivity and dielectric behavior of carbon black reinforced high density polyethylene (HDPE-CB) and HDPE-CB filled with multiwalled carbon nanotubes (MWNTs-CB-HDPE) and Polyaniline (PAni) coated MWNTs-CB-HDPE nanocomposites. The electrical properties such as dielectric constant ({epsilon}'), dissipation factor (tan {delta}) and AC conductivity ({sigma}{sub ac}) of nanocomposites have been measured with reference to the weight fraction (0.5 and 1 wt% MWNTs), frequency (75 KHz-30 MHz), temperature (25-90 deg. C) and sea water ageing. The experimental results showed that the increased AC conductivity and dielectric constant of the nanocomposites were influenced by PAni coated MWNTs in HDPE-CB nanocomposites. The value of dielectric constant and tan {delta} decreased with increasing frequency. Further more, above 5 MHz the AC conductivity increases drastically whereas significant effect on tan {delta} was observed in less than 1 MHz.

36 MATERIALS SCIENCE↗

Processing and Switching Behavior of Multiferroic (Bi{sub 0.7}Dy{sub 0.3}FeO{sub 3}) Microstructure Arrays

Multiferroic systems, which exhibit coexistence of both ferroelectric and ferromagnetic ordering at room temperature, are of great importance for a variety of device applications. Due to coupling between the two order parameters, it is possible to bring polarization in the multiferroic systems by either means (applying electric or magnetic field). We have been successful in developing material (Bi{sub 0.7}Dy{sub 0.3}FeO{sub 3}) which exhibits the multiferroic behavior at room temperature with significant coupling in bulk as well as thin films. We therefore propose to develop a procedure to fabricate multiple memory devices using this new compound.

36 MATERIALS SCIENCE↗

Interchannel optical coupling within arrays of linear microplasmas generated in 25-200{mu}m wide glass channels

Axially uniform microcavity plasmas with widths of 25-200 {mu}m and aspect ratios as high as 500 have been generated in glass microchannels. Sealed in cavities 2.5 cm in length and having a cross-sectional area of 2.5x10{sup 2}-10{sup 4} {mu}m{sup 2}, these microplasmas operate in the abnormal glow regime with neutral particle temperatures of 365-420 K when the rare gas pressure is 200-700 Torr. In arrays as large as ten parallel microchannel plasmas, evidence of optical coupling among the channels is observed in the form of strongly enhanced atomic emission which is attributed to electron heating driven by the resonant absorption of scattered radiation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Separation of Copper Isotopes in the Laser Plume

Isotopic separation was observed during ablation of standard copper samples by a nanosecond Nd-YAG laser and a femtosecond Ti:sapphire laser at 266 nm. A time-of-flight mass spectrometer, orthogonal to the direction of the laser plume, was used to measure the isotopic composition of the plasma. A voltage was applied to the pulser at different delay times after the laser was ired in order to obtain a temporal profile as the plume expanded. The fraction of {sup 63}Cu in the plasma detected by the mass spectrometer reaches a maximum of 0.83 at 6 US and 3 {mu}s after the laser is fired for the nanosecond and femtosecond lasers respectively, before falling back to the natural abundance ratio of 0.69. As reported in the literature, the ion peaks are centered at two different delay times, representing fast and slow ion energy distributions. A mechanism based on the electric ield interactions between the electrons and ions is proposed to explain the separation of isotopes in the plume.

07 ISOTOPE AND RADIATION SOURCES↗

Piezoelectric InAs (211)B quantum dots grown by molecular beam epitaxy: Structural and optical properties

The structural and optical properties of piezoelectric (211)B InAs nanostructures grown by molecular beam epitaxy are systematically investigated as a function of the various growth parameters. Depending on the specific growth conditions, we show that the InAs nanostructures take the form of a quantum dot (QD) or a quantum dash, their height ranges between 2 and 20 nm, and their density varies from a few times 10{sup 8} cm{sup -2} all the way up to a few times 10{sup 10} cm{sup -2}. The (211)B QDs are characterized by large aspect ratios, which are compatible with a truncated pyramid morphology. By analyzing the QD emission spectrum, we conclude that only small size QDs, with heights less than 3 nm, are optically active. This is consistent with high resolution transmission electron microscopy observations showing that large QDs contain misfit dislocations, whereas small QDs are dislocation-free. The formation of a two-dimensional wetting layer is observed optically, and its thickness is determined to be between 0.30 and 0.39 nm. Finally, the large blueshift in the QD emission observed with increasing excitation power represents a clear evidence of the strong built-in piezoelectric field present in these dots.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of Prosthesis Stem Tapers on Stress Distribution of Cemented Hip Arthroplasty

Aseptic loosening effects are critical issues in encouraging long term stability of cemented hip arthroplasty. Stress shielding is believed to be an important factor that contributes to the aseptic loosening problems. The numerous changes in the prosthesis stem design are intended to minimize the stress shielding and aseptic loosening problems and to improve the long term performance of the implants. In this study, the stress distribution in cemented hip arthroplasty is established using finite element method. The taper of the prosthesis is designed to be 3 deg. at anterior/posterior, 3 deg. at medial/lateral and 10 deg. from wide lateral to narrow medial. Major muscle loads and contact forces are simulated for walking (toe-off phase) and stair climbing load cases. Effects of prosthesis stem tapers on the resulting stress distribution are investigated. Results show that compressive stress dominates in the medial plane while tensile stress in the lateral plane of the femur. The corresponding stress levels of intact femur for walking and stair-climbing load cases are 22 and 29 MPa, respectively. The magnitude of Tresca stress for the THA femur in stair-climbing load case remains higher in the region of 85 MPa while the walking load case induces around 40 MPa. The stress range in the straight and single taper stem prosthesis is lower than 260 MPa, while localized Tresca stress is in the order of the yield strength of Ti-6Al-4V alloy for double and triple taper stem design.

36 MATERIALS SCIENCE↗

High efficiency semimetal/semiconductor nanocomposite thermoelectric materials

Rare-earth impurities in III-V semiconductors are known to self-assemble into semimetallic nanoparticles which have been shown to reduce lattice thermal conductivity without harming electronic properties. Here, we show that adjusting the band alignment between ErAs and In{sub 0.53}Ga{sub 0.47-X}Al{sub X}As allows energy-dependent scattering of carriers that can be used to increase thermoelectric power factor. Films of various Al concentrations were grown by molecular beam epitaxy, and thermoelectric properties were characterized. We observe concurrent increases in electrical conductivity and Seebeck coefficient with increasing temperatures, demonstrating energy-dependent scattering. We report the first simultaneous power factor enhancement and thermal conductivity reduction in a nanoparticle-based system, resulting in a high figure of merit, ZT=1.33 at 800 K.

36 MATERIALS SCIENCE↗