Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dislocation structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Effect of nitrogen plasma power on defect levels in Ni/n-GaN Schottky diodes grown by molecular beam epitaxy

The incorporation of deep level defects in n-type GaN grown by plasma assisted molecular beam epitaxy was studied via systematic adjustment of the nitrogen plasma source power from 150 to 400 W while maintaining a constant V/III beam flux ratio. Deep level optical spectroscopy and conventional thermal deep level transient spectroscopy measurements, which together enable deep level detection throughout the GaN band gap, revealed several deep level concentrations that depend strongly on rf-plasma power. The concentrations of the gallium vacancy deep level at E{sub C}-2.60 eV and carbon-related point defects with energy levels at E{sub C}-3.28 and E{sub C}-1.35 eV are found to be very sensitive to the nitrogen source power, increasing by up to 50 times for a corresponding increase in plasma power from 150 to 400 W. The relation between the concentrations of these traps and plasma power follows an Arrhenius-type behavior and is suggestive of plasma damage associated with the energetics of the constituent active nitrogen species. In contrast, two traps at E{sub C}-0.86 and E{sub C}-0.59 eV did not exhibit a systematic dependence on plasma power, with this difference a result of the dislocation-related nature of these defects.

36 MATERIALS SCIENCE↗

The BiCu{sub 1−x}OS oxysulfide: Copper deficiency and electronic properties

An oxysulfide series of nominal compositions BiCu{sub 1−x}OS with x<0.20 has been prepared and its structural properties characterized by combining powder X-ray diffraction and transmission electron microscopy techniques. It is found that this oxysulfide, crystallizing in the P4/nmm space group, tends to adopt a constant amount of copper vacancy corresponding to x=0.05 in the BiCu{sub 1−x}OS formula. The presence of Cu vacancies is confirmed by HAADF-STEM analysis showing, in the Cu atomic columns, alternating peaks of different intensities in some very localized regions. For larger Cu deficiencies (x>0.05 in the nominal composition), other types of structural nanodefects are evidenced such as bismuth oxysulfides of the “BiOS” ternary system which might explain the report of superconductivity for the BiCu{sub 1−x}OS oxysulfide. Local epitaxial growth of the BiCuOS oxysulfide on top of CuO is also observed. In marked contrast to the BiCu{sub 1−x}OSe oxyselenide, these results give an explanation to the limited impact of Cu deficiency on the Seebeck coefficient in BiCu{sub 1−x}OS compounds. - Graphical abstract: High resolution TEM image showing a Bi(Cu)OS/Bi{sub 2}O{sub 2}S interface and corresponding dislocation region. The Bi(Cu)OS structure adopts a rather constant Cu content (near 0.95); starting from BiCuOS leads to the formation of defects such as the Bi{sub 2}O{sub 2}S oxysulfide.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anisotropy of tensile stresses and cracking in nonbasal plane Al{sub x}Ga{sub 1-x}N/GaN heterostructures

Al{sub x}Ga{sub 1-x}N films grown on nonpolar m (1100) and (1122) semipolar orientations of freestanding GaN substrates were investigated over a range of stress states (x<=0.17). Cracking on the (0001) plane was observed beyond a critical thickness in the (1100) oriented films, while no cracking was observed for (1122) films. Theoretical analysis of tensile stresses in Al{sub x}Ga{sub 1-x}N for the relevant planes revealed that anisotropy of in-plane biaxial stress for the nonpolar (1100) planes results in the highest normal stresses on the c-planes, consistent with experimental observations. Shear stresses are significant in the semipolar case, suggesting that misfit dislocation formation provides an alternative mechanism for stress relief.

36 MATERIALS SCIENCE↗

Thermal transport at (001) twist grain boundaries in UO{sub 2}

The thermal conductivity of the nuclear fuels critically affects performance and safety of the nuclear reactor and thus continues to attract interest of engineers and researches. In spite of the large volume of experimental data on the thermal transport properties in UO{sub 2}, new discoveries in recent years include anisotropic thermal conductivity, and unexpectedly large contribution of the optical phonons to thermal transport. On the other hand, advances in computer power allow to simulate directly from atomic level the effect of structural defects such as grain boundaries, dislocations and pores on the thermal conductivity in UO{sub 2}. Unfortunately, such simulations do not provide detailed information about phonon scattering processes, which are important for the complete understanding of the thermal transport and generation of the physics-based thermal transport models in nuclear performance codes. In this work, we apply phonons wave-packet (PWD) molecular dynamics simulation technique in order to elucidate the individual phonons contribution to the thermal transport through the grain boundaries (GB) in UO{sub 2}. In this work we elucidated the effect of the grain boundary atomic structure on the details of the thermal conductance through the interface. Namely, we demonstrated that transmission coefficient as a function of the wave vector is a strong function of the disorder at the interface: for ideally structured GBs it has sharp peaks and pronounced valleys. Such structure disappears upon introduction of the disorder near the interface, and as a result transmission coefficients behave very similarly between GBs of different misorientation, but the same degree of disorder. Kapitza conductance through these GBs is also nearly identical. It is unlikely for experimentally observed GBs to be atomically sharp, and thus Kapitza conductance in polycrystalline UO{sub 2} can be considered misorientation independent with good accuracy, and it does not to be accounted for in physics-based thermal transport model for fuel performance codes. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Crystal structure of stacking faults in InGaAs/InAlAs/InAs heterostructures

Stacking faults and dislocations in InGaAs/InAlAs/InAs heterostructures have been studied by electron microscopy. The use of different techniques of transmission electron microscopy (primarily, highresolution dark-field scanning transmission electron microscopy) has made it possible to determine the defect structure at the atomic level.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Coincident site lattice-matched InGaN on (111) spinel substrates

Coincident site lattice-matched wurtzite (0001) In{sub 0.31}Ga{sub 0.69}N, emitting in the important green wavelength region, is demonstrated by molecular beam epitaxy on a cubic (111) MgAl{sub 2}O{sub 4} spinel substrate. The coincident site lattice matching condition involves a 30 deg. rotation between the lattice of the InGaN epitaxial layer and the lattice of the spinel. This work describes an alternative approach towards realizing more compositionally homogenous InGaN films with low dislocation density emitting in the ''green gap'' of low efficiency currently observed for semiconductor light emitting diodes (LEDs). This approach could lead to higher efficiency green LEDs presently of great interest for solid-state lighting applications.

36 MATERIALS SCIENCE↗

Study of the structure and composition of the strained epitaxial layer in the InAlAs/GaAs(100) heterostructure by transmission electron microscopy

The results of electron microscopy studies of an epitaxial InAlAs layer on a GaAs(100) substrate are reported. It is established that there exist misfit dislocations at the interface between the materials and there are residual strains distorting the lattice in the layer. From the measurements of lattice parameters in the directions parallel and orthogonal to the growth direction away from misfit dislocations, the local nominal lattice parameter of the layer is calculated and the relative content of indium is determined.

36 MATERIALS SCIENCE↗

Elucidating the microscopic origin of electrochemical corrosion and electrical conductivity by lattice response to severe plastic deformation in Al-Mn-Si alloy

Highlights: • Al-Mn-Si specimens were underwent severe plastic deformation by CGP and cold-rolling and their combined routes. • Microscopical observations depicted particles' fragmentation and non-preferential distribution under heavy straining. • XRD analysis revealed dislocations annihilation and lattice swelling (d-spacing increase) due to dynamic recrystallization. • Polarization outputs disclosed direct correlation of corrosion behavior with dislocations density. • Four-point probe test proved that electrical conductivity was a function of lattice d-spacing. - Abstract: Al-Mn-Si specimens were underwent SPD by CGP, cold-rolling and their combined paths. Acquired OM and SEM micrographs revealed that random distribution of intermetallic precipitates beside their fragmentation under heavy imposed strains deteriorated particles’ influence on the electrochemical corrosion and inhibited pitting. Analysis of XRD patterns pointed out that post-rolling of CGPed sheets resulted in dynamic annihilation of dislocations and accordingly crystal lattice swelling (d-spacing increase) due to dynamic recrystallization. From polarization results, crystallites’ refinement along with density increment of sub-grain boundaries within structure as a consequence of SPD beside dislocation density enhancement accelerated corrosion. Outputs of four-point probe electrical conductivity examination indicated that apart from the employed processing, lattice compaction and atomic layers approach would limit the electrons’ mobility space and hence reduce the conductivity of material. In this regard, combined effects of CGP and rolling as employed dual-straining route on Al-Mn-Si alloy enhanced the electrical conductivity by d-spacing growth.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Low defect-mediated reverse-bias leakage in (0001) GaN via high-temperature molecular beam epitaxy

Conductive atomic force microscopy, scanning electron microscopy, and x-ray diffraction were used to determine the effects of Ga/N flux ratio on the conductivity of current leakage paths in GaN grown by molecular beam epitaxy. Our data reveal a band of fluxes near Ga/Napprox =1 for which these pathways ceased to be observable. We conclude that changes in surface defects surrounding or impurities along screw-component threading dislocations are responsible for their conductive nature. These observations suggest a method for controlling the primary source of reverse-bias Schottky contact leakage in n-type GaN grown by molecular beam epitaxy.

36 MATERIALS SCIENCE↗

Phase-field modeling of dislocation–interstitial interactions

The mechanical behavior of body-centered cubic (BCC) materials can be dramatically affected by the presence of interstitial solute atoms. Here we present a new phase-field dislocation dynamics formulation to include the diffusion of interstitials. Short-range interactions are accounted for by a concentration-dependent lattice energy, and long-range interactions are accounted for by modifications to the elastic energy. The interstitial diffusion law introduces gradients that require methods for minimizing Gibbs oscillations, which is done via a modified Green’s function. The formulation is general to any solute-solvent system and is applied here to Nb-O as a model system, whose interstitial parameters are obtained from ab initio calculations. The effect of O on the core structures of Nb edge and screw dislocations is calculated. The diffusion of O to form interstitial atmospheres around dislocation cores is simulated, as well as the critical stresses required for dislocations to break away or cross slip from these atmospheres. Future applications of the method to simulate complex interstitial embrittlement mechanisms are discussed.

36 MATERIALS SCIENCE↗

Microstructure-lattice thermal conductivity correlation in nanostructured PbTe{sub 0.7}S{sub 0.3} thermoelectric materials.

The reduction of thermal conductivity, and a comprehensive understanding of the microstructural constituents that cause this reduction, represent some of the important challenges for the further development of thermoelectric materials with improved figure of merit. Model PbTe-based thermoelectric materials that exhibit very low lattice thermal conductivity have been chosen for this microstructure-thermal conductivity correlation study. The nominal PbTe{sub 0.7}S{sub 0.3} composition spinodally decomposes into two phases: PbTe and PbS. Orderly misfit dislocations, incomplete relaxed strain, and structure-modulated contrast rather than composition-modulated contrast are observed at the boundaries between the two phases. Furthermore, the samples also contain regularly shaped nanometer-scale precipitates. The theoretical calculations of the lattice thermal conductivity of the PbTe{sub 0.7}S{sub 0.3} material, based on transmission electron microscopy observations, closely aligns with experimental measurements of the thermal conductivity of a very low value, {approx}0.8 W m{sup -1} K{sup -1} at room temperature, approximately 35% and 30% of the value of the lattice thermal conductivity of either PbTe and PbS, respectively. It is shown that phase boundaries, interfacial dislocations, and nanometer-scale precipitates play an important role in enhancing phonon scattering and, therefore, in reducing the lattice thermal conductivity.

36 MATERIALS SCIENCE↗

Molecular Statics Analyses of Thermodynamics and Kinetics of Hydrogen Cottrell Atmosphere Formation Around Edge Dislocations in Aluminum

Aluminum alloys are being explored as lightweight structural materials for use in hydrogen-containing environments. In this paper, to understand hydrogen effects on deformation, we perform molecular statics studies of the hydrogen Cottrell atmosphere around edge dislocations in aluminum. First, we calculate the hydrogen binding energies at all interstitial sites in a periodic aluminum crystal containing an edge dislocation dipole. This allows us to use the Boltzmann equation to quantify the hydrogen Cottrell atmosphere. Based on these binding energies, we then construct a continuum model to study the kinetics of the hydrogen Cottrell atmosphere formation. Finally, we compare our results with existing theories and discuss the effects of hydrogen on deformation of aluminum-based alloys.

36 MATERIALS SCIENCE↗

Dislocation-mediated melting of one-dimensional Rydberg crystals

We consider cold Rydberg atoms in a one-dimensional optical lattice in the Mott regime with a single atom per site at zero temperature. An external laser drive with Rabi frequency {Omega} and laser detuning {Delta} creates Rydberg excitations whose dynamics is governed by an effective spin-chain model with (quasi) long-range interactions. This system possesses intrinsically a large degree of frustration resulting in a ground-state phase diagram in the ({Delta},{Omega}) plane with a rich topology. As a function of {Delta}, the Rydberg blockade effect gives rise to a series of crystalline phases commensurate with the optical lattice that form a so-called devil's staircase. The Rabi frequency {Omega}, on the other hand, creates quantum fluctuations that eventually lead to a quantum melting of the crystalline states. Upon increasing {Omega}, we find that generically a commensurate-incommensurate transition to a floating Rydberg crystal that supports gapless phonon excitations occurs first. For even larger {Omega}, dislocations within the floating Rydberg crystal start to proliferate and a second, Kosterlitz-Thouless-Nelson-Halperin-Young dislocation-mediated melting transition finally destroys the crystalline arrangement of Rydberg excitations. This latter melting transition is generic for one-dimensional Rydberg crystals and persists even in the absence of an optical lattice. The floating phase and the concomitant transitions can, in principle, be detected by Bragg scattering of light.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dislocation-Grain Boundary Interaction Dataset for FCC Cu

Interactions between dislocations and grain boundaries play a major role in controlling the strength and ductility of structural materials. Experimentally, assessing and probing geometric and stress-based criteria at the local level for dislocation transmission through grain boundaries remains challenging. Therefore, there have been many efforts to systematically generate datasets of dislocation-grain boundary interactions (DGI) via computational models such as molecular dynamics simulations. So far, most DGI datasets have focused only on the subset of nominal minimum-energy grain boundary structures, which limits their applicability, especially to materials processed far from equilibrium. We present a comprehensive database of dislocation-grain boundary interactions for edge, screw, and 60° mixed dislocation with 330 <110> and 257 <112> symmetric tilt grain boundaries (total of 587) in FCC Cu consisting of 73 minimum-energy grain boundary structures and 514 metastable structures. The dataset contains the outcomes for 5234 unique interactions for various dislocation types, grain boundary structures, and applied shear stresses.

36 MATERIALS SCIENCE↗

Electron Screening in Metals

Electron screening enhances cross sections for nuclear reactions at low energies. We have studied the {sup 1}H({sup 7}Li,{alpha}){sup 4}He reaction in inverse kinematics and observed large electron screening only when the metallic targets were under tensile stress. Hydrogen was loaded into Pd and PdAg alloy foils from gas phase and concentrations reached about 0.6 protons per metallic atom. Mechanical pressure creates stress induced states in the metal. Without pressure hydrogen occupies octahedral interstitial positions in the fcc Pd lattice. Under stress some protons move to dislocated octahedral (dis-O) sites in the lattice. We believe that the magnitude of screening in various metals depends on the electron density on dis-O sites in case of fcc lattices or dislocated tetrahedral sites in bcc metals. We are currently trying to confirm the above by determining the electron density at the sites occupied by protons via the measurement of proton Knight's shift with {sup 1}H nuclear magnetic resonance technique.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Mesoscale Investigation of Dislocation-Grain Boundary Interactions in Metals and Alloys [Slides]

GBs have been subject of intense study for several years, including the effects of microstructure on mechanical response. Until recently these have been primarily focused on a limited number of idealized GB structures (i.e, the minimum energy structure). We are specifically focusing on changes in local GB structure and the effect this has on dislocation-grain boundary interactions. This will help us to better understand both (more) realistic and general GB structures.

36 MATERIALS SCIENCE↗

Crystallization Dynamics of a Single Layer Complex Plasma

We report a series of complex (dusty) plasma experiments, aimed at the study of the detailed time evolution of the recrystallization process following a rapid quench of a two-dimensional dust liquid. The experiments were accompanied by large-scale (million-particle) molecular dynamics simulations, assuming Yukawa-type interparticle interaction. Both experiment and simulation show a {proportional_to}t{sup {alpha}} (power-law) dependence of the linear crystallite domain size as measured by the bond-order correlation length, translational correlation length, dislocation (defect) density, and a direct size measurement algorithm. The results show two stages of order formation. On short time scales, individual particle motion dominates; this is a fast process characterized by {alpha}=0.93{+-}0.1. At longer time scales, small crystallites undergo collective rearrangement, merging into bigger ones, resulting in a smaller exponent {alpha}=0.38{+-}0.06.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗