Search NASA⌕ Search

SEARCH · Search NASA

Results for “EXPANSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Modeling Improvements for Air Source Heat Pumps using Different Expansion Devices at Varied Charge Levels Part II

This paper describes steady-state performance simulations performed on a 3-ton R-22 split heat pump in heating mode. In total, 150 steady-state points were simulated, which covers refrigerant charge levels from 70 % to 130% relative to the nominal value, the outdoor temperatures at 17 F (-8.3 C), 35 F (1.7 C) and 47 F (8.3 C), indoor air flow rates from 60% to 150% of the rated air flow rate, and two types of expansion devices (fixed orifice and thermostatic expansion valve). A charge tuning method, which is to calibrate the charge inventory model based on measurements at two operation conditions, was applied and shown to improve the system simulation accuracy significantly in an extensive range of charge levels. In addition, we discuss the effects of suction line accumulator in modeling a heat pump system using either a fixed orifice or thermal expansion valve. Last, we identify the issue of refrigerant mass flow mal-distribution at low charge levels and propose an improved modeling approach.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

The principal component analysis method used with polynomial Chaos expansion to propagate uncertainties through critical transport problems

A critical neutron transport problem with random material properties is introduced. The total cross section and the average neutron multiplicity are assumed to be uncertain, characterized by the mean and variance with a log-normal distribution. The average neutron multiplicity and the total cross section are assumed to be uncorrected and the material properties for differing materials are also assumed to be uncorrected. The principal component analysis method is used to decompose the covariance matrix into eigenvalues and eigenvectors and then 'realizations' of the material properties can be computed. A simple Monte Carlo brute force sampling of the decomposed covariance matrix is employed to obtain a benchmark result for each test problem. In order to save computational time and to characterize the moments and probability density function of the multiplication factor the polynomial chaos expansion method is employed along with the stochastic collocation method. A Gauss-Hermite quadrature set is convolved into a multidimensional tensor product quadrature set and is successfully used to compute the polynomial chaos expansion coefficients of the multiplication factor. Finally, for a particular critical fuel pin assembly the appropriate number of random variables and polynomial expansion order are investigated. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Application of wavelet scaling function expansion continuous-energy resonance calculation method to MOX fuel problem

More and more MOX fuels are used in all over the world in the past several decades. Compared with UO{sub 2} fuel, it contains some new features. For example, the neutron spectrum is harder and more resonance interference effects within the resonance energy range are introduced because of more resonant nuclides contained in the MOX fuel. In this paper, the wavelets scaling function expansion method is applied to study the resonance behavior of plutonium isotopes within MOX fuel. Wavelets scaling function expansion continuous-energy self-shielding method is developed recently. It has been validated and verified by comparison to Monte Carlo calculations. In this method, the continuous-energy cross-sections are utilized within resonance energy, which means that it's capable to solve problems with serious resonance interference effects without iteration calculations. Therefore, this method adapts to treat the MOX fuel resonance calculation problem natively. Furthermore, plutonium isotopes have fierce oscillations of total cross-section within thermal energy range, especially for {sup 240}Pu and {sup 242}Pu. To take thermal resonance effect of plutonium isotopes into consideration the wavelet scaling function expansion continuous-energy resonance calculation code WAVERESON is enhanced by applying the free gas scattering kernel to obtain the continuous-energy scattering source within thermal energy range (2.1 eV to 4.0 eV) contrasting against the resonance energy range in which the elastic scattering kernel is utilized. Finally, all of the calculation results of WAVERESON are compared with MCNP calculation. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Hydration and Thermal Expansion in Anatase Nanoparticles

A tunable thermal expansion is reported in nanosized anatase by taking advantage of surface hydration. The coefficient of thermal expansion of 4 nm TiO2 along a-axis is negative with a hydrated surface and is positive without a hydrated surface. High-energy synchrotron X-ray pair distribution function analysis combined with ab initio calculations on the specific hydrated surface are carried out to reveal the local structure distortion that is responsible for the unusual negative thermal expansion.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

In Situ Method Correlating Raman Vibrational Characteristics to Chemical Expansion via Oxygen Nonstoichiometry of Perovskite Thin Films

Abstract Effective integration of perovskite films into devices requires knowledge of their electro‐chemomechanical properties. Raman spectroscopy is an excellent tool for probing such properties as the films' vibrational characteristics couple to the lattice volumetric changes during chemical expansion. While lattice volumetric changes are typically accessed by analyzing Raman shifts as a function of pressure, stress, or temperature, such methods can be impractical for thin films and do not capture information on chemical expansion. An in situ Raman spectroscopy technique using an electrochemical titration cell to change the oxygen nonstoichiometry of a model perovskite film, Sr(Ti,Fe)O 3− y , is reported and the lattice vibrational properties are correlated to the material's chemical expansion. How to select an appropriate Raman vibrational mode to track the evolution in oxygen nonstoichiometry is discussed. Subsequently, the frequency of the oxygen stretching mode around Fe 4+ is tracked, as it decreases during reduction as the material expands and increases during reoxidation as the material shrinks. This methodology of oxygen pumping and in situ Raman spectroscopy of oxide films enables future in operando measurements even for small material volumes, as is typical for applications of films as electrodes or electrolytes utilized in electrochemical energy conversion or memory devices.

Sediva, Eva↗

Interpenetration as a Mechanism for Negative Thermal Expansion in the Metal-Organic Framework Cu 3 (btb) 2 (MOF-14)

Metal–organic framework materials (MOFs) have recently been shown in some cases to exhibit strong negative thermal expansion (NTE) behavior, while framework interpenetration has been found to reduce NTE in many materials. Using powder and single-crystal diffraction methods we investigate the thermal expansion behavior of interpenetrated Cu 3 (btb) 2 (MOF-14) and find that it exhibits an anomalously large NTE effect. Temperature-dependent structural analysis shows that, contrary to other interpenetrated materials, in MOF-14 the large positive thermal expansion of weak interactions that hold the interpenetrating networks together results in a low-energy contractive distortion of the overall framework structure, demonstrating a new mechanism for NTE.

Wu, Yue↗

Multiphysics simulation of recent experiments on alkali‐silica reaction expansion in reinforced concrete members

Alkali‐silica reaction (ASR) is an important degradation process that causes volumetric expansion and damage in concrete, and is affected significantly by the local temperature, moisture and stress conditions that often vary across the regions of a structure. Numerical simulation is essential to predict the progression and effects of ASR on the performance of structures. Because of the interactions between thermal and moisture transport and mechanical deformation, it is important for numerical models to represent all these physical phenomena and the coupling between them. Simulations of ASR in reinforced concrete (RC) structures are further complicated by the need to capture interactions between concrete and embedded reinforcing bars. Here, this paper describes the implementation of a scalable, coupled‐physics ASR model for simulating RC structures and assesses the ability of that model to predict ASR‐induced expansion in recent laboratory tests on RC block and beam specimens. These laboratory tests and the simulation approach were selected because of their applicability to RC structural‐scale simulations. This validation study helps builds confidence the ability of this approach to model ASR expansion in large, complex RC structures, which is a current high‐priority need.

36 MATERIALS SCIENCE↗

Coupled Physics Simulation of Expansive Reactions in Concrete with the Grizzly Code

The Grizzly code is being developed under the US Department of Energy’s Light Water Sustainability program as a tool to model aging mechanisms and their effects on the integrity of critical nuclear power plant components. An important application for Grizzly is the modeling of aging in concrete structures, which can be due to a number of mechanisms. Initial focus in this area has been on modeling expansive reactions due to alkali-silica reactions or radiation-induced volumetric expansion. Grizzly is an inherently multiphysics modeling platform that naturally permits including the effects of multiple coupled physics in a simulation. Models have been developed for transport of heat and moisture in concrete, and these have been coupled and used as inputs to models for expansive reactions. This paper summarizes this capability as well as work currently underway to couple it with mechanical deformation models that account for nonlinear constitutive behavior.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Celestial operator product expansions and w 1+∞ symmetry for all spins

The operator product expansion of massless celestial primary operators of arbitrary spin is investigated. Poincaré symmetry is found to imply a set of recursion relations on the operator product expansion coefficients of the leading singular terms at tree-level in a holomorphic limit. The symmetry constraints are solved by an Euler beta function with arguments that depend simply on the right-moving conformal weights of the operators in the product. These symmetry-derived coefficients are shown not only to match precisely those arising from momentum-space tree-level collinear limits, but also to obey an infinite number of additional symmetry transformations that respect the algebra of w 1+∞ . In tree-level minimally-coupled gravitational theories, celestial currents are constructed from light transforms of conformally soft gravitons and found to generate the action of w 1+∞ on arbitrary massless celestial primaries. Results include operator product expansion coefficients for fermions as well as those arising from higher-derivative non-minimal couplings of gluons and gravitons.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Improved opacity expansion for medium-induced parton splitting

We present a new expansion scheme to compute the rate for parton splittings in dense and finite QCD media. In contrast to the standard opacity expansion, our expansion is performed around the harmonic oscillator whose characteristic frequency depends on the typical transverse momentum scale generated in the splitting. The first two orders account for the high frequency regime that is dominated by single hard scatterings together with the regime of multiple soft scatterings at low frequency. This work generalizes the findings of Ref. [1] beyond the leading logarithmic approximation allowing to account also for the Bethe-Heitler regime and compare to the full numerical results from [2]. We investigate the sensitivity of our results to varying the separation scale that defines the leading order. Finally, the application to Monte Carlo event generators is discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Conformal wave expansions for flat space amplitudes

The extended BMS algebra contains a conformal subgroup that acts on the celestial sphere as SO(1, 3). It is of interest to perform mode expansions of free fields in Minkowski spacetime that realize this symmetry in a simple way. In the present work we perform such a mode expansion for massive scalar fields using the unitary principal series representations of SO(1, 3) with a view to developing a holographic approach to gravity in asymptotically flat spacetime. These mode expansions are also of use in studying holography in three-dimensional de Sitter spacetime.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Soft Expansion of Double-Real-Virtual Corrections to Higgs Production at N$^3$LO

We present methods to compute higher orders in the threshold expansion for the one-loop production of a Higgs boson in association with two partons at hadron colliders. This process contributes to the N 3 LO Higgs production cross section beyond the soft-virtual approximation. We use reverse unitarity to expand the phase-space integrals in the small kinematic parameters and to reduce the coefficients of the expansion to a small set of master integrals. We describe two methods for the calculation of the master integrals. The first was introduced for the calculation of the soft triple-real radiation relevant to N 3 LO Higgs production. The second uses a particular factorization of the three body phase-space measure and the knowledge of the scaling properties of the integral itself. Our result is presented as a Laurent expansion in the dimensional regulator, although some of the master integrals are computed to all orders in this parameter.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Medium-induced radiative kernel with the Improved Opacity Expansion

We calculate the fully differential medium-induced radiative spectrum at next-to-leading order (NLO) accuracy within the Improved Opacity Expansion (IOE) framework. This scheme allows us to gain analytical control of the radiative spectrum at low and high gluon frequencies simultaneously. The high frequency regime can be obtained in the standard opacity expansion framework in which the resulting power series diverges at the characteristic frequency ω c ~ q^L 2 . In the IOE, all orders in opacity are resumed systematically below ωc yielding an asymptotic series controlled by logarithmically suppressed remainders down to the thermal scale T « ω c , while matching the opacity expansion at high frequency. Furthermore, we demonstrate that the IOE at NLO accuracy reproduces the characteristic Coulomb tail of the single hard scattering contribution as well as the Gaussian distribution resulting from multiple soft momentum exchanges. Finally, we compare our analytic scheme with a recent numerical solution, that includes a full resummation of multiple scatterings, for LHC-inspired medium parameters. Furthermore, we find a very good agreement both at low and high frequencies showcasing the performance of the IOE which provides for the first time accurate analytic formulas for radiative energy loss in the relevant perturbative kinematic regimes for dense media.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Transjugular Intrahepatic Portosystemic Shunt Using the New Gore Viatorr Controlled Expansion Endoprosthesis: Prospective, Single-Center, Preliminary Experience

Objectives: To evaluate short-term clinical efficacy, complications and possible passive stent expansion of transjugular intrahepatic portosystemic shunt (TIPS) creation using the new controlled expansion ePTFE covered stent (VCX), for portal hypertension complications. Methods: Between 7/2016 and 3/2018, 75 patients received TIPS using VCX. Thirty-nine patients with VCX dilated with an 8-mm angioplasty balloon underwent computed tomography (CT) study during follow-up and CT data were used to measure stent diameter. The CT measurement technique was validated by ex vivo experiment. Results: TIPS indications were: refractory ascites (n = 45), variceal bleeding (n = 22), other (n = 8). Mean follow-up was 5.8 months (± 4.5, range 1–20). In 69 patients, TIPS was dilated to 8 mm of diameter reaching the hemodynamic target of a portosystemic pressure gradient (PSG) < 12 mmHg. In six patients, not reaching the hemodynamic target the stent was dilated to 10 mm of diameter during the same session with a final PSG < 12 mmHg. Overall clinical success was achieved in 66/75 (88%) patients (80% in refractory ascites, 95% variceal bleeding, 100% other). Grade II–III encephalopathy was observed in five patients (6%). TIPS revision with stent dilatation to 10 mm was performed in seven patients: in three patients with ascites persistence, without evidence of stent dysfunction and in four patients for stent stenosis. One patient underwent stent reduction. Fourteen patients (18%) died during follow-up of causes not related to TIPS. Five patients (6%) underwent liver transplant. No passive stent expansion was detected by CT measurements. Conclusion: VCX for TIPS creation retains its diameter over a short-term period and is associated with a good clinical outcome with a reasonably low complication rate.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Asymptotic expansions for oscillatory integrals using inverse functions.

We treat finite oscillatory integrals of the form {integral}{sub a}{sup b} F(x)e{sup ikG(x)} dx in which both F and G are real on the real line, are analytic over the open integration interval, and may have algebraic singularities at either or both interval end points. For many of these, we establish asymptotic expansions in inverse powers of k. No appeal to the theories of stationary phase or steepest descent is involved. We simply apply theory involving inverse functions and expansions for a Fourier coefficient {integral}{sub a}{sup b} {phi}(t)e{sup ikt} dt. To this end, we have assembled several results involving inverse functions. Moreover, we have derived a new asymptotic expansion for this integral, valid when {phi}(t) = {Sigma}a{sub j}t{sup {sigma}}j, -1 < {sigma}{sub 1} < {sigma}{sub 2} < {hor_ellipsis}.

97 MATHEMATICS AND COMPUTING↗

Effective Thermoelasticity of Polymer-Bonded Particle Composites with Imperfect Interfaces and Thermally Expansive Interphases

A micromechanical model for the thermoelasticity of polymer-bonded composites is presented. The model is particularly aimed at describing materials where the polymeric binder phase undergoes non-negligible thermal expansion affecting the overall thermoelastic response. Constitutive choices for modeling a mixed binder-void interphase layer are proposed, and an associated decomposition of total eigenstrains into classical, elastic imperfection (damage), and binder thermal expansivity parts is examined within the context of imperfect inter-particle interfaces. A novel temperature dependent modified Eshelby tensor is identified, making possible the development of a temperature dependent modified self-consistent homogenization scheme—what we call the M θ-SCH model. A method for distinguishing between dispersed and isolated parts of the binder and void phases in the model is also provided, along with a description of particle coating (or interphase) thickness derived from particle morphology and mesoscale effective properties. Finally, although the theory is general, its development is motivated by the need to model anisotropic and highly nonlinear observed thermal expansion behavior of the polymer bonded explosive PBX 9502, for which model simulations are performed and compared with existing measurements.

36 MATERIALS SCIENCE↗

Instantons, colloids and convergence of the 1/N expansion for the homogeneous electron gas

We investigate non-perturbative corrections to the large N expansion of the homogeneous electron gas. These are associated with instanton solutions to the effective action of the plasmon field. We show that, although the large field behavior of that action dominates the quadratic bare Coulomb term, there are no solutions at large field, and consequently none at large density. We argue that solutions would exist at low density if the large N theory had a Wigner crystal (WC) phase. However, we argue that this is not the case. Together with the implied convergence of the large N expansion, this implies that the homogeneous electron gas with N component spins and a Coulomb interaction scaling like 1∕N can only have a WC phase below a curve in the plane of N and density, which asymptotes to zero density at infinite N. We argue that for systems with a semi-classical expansion for order parameter dynamics, and a first order quantum transition between fluid and crystal phases, there are instantons associated with the decays of meta-stable fluid and crystal phases in the appropriate regions of the phase diagram. We argue that the crystal will decay into one or more colloidal or bubble phases (Kivelson and Spivak, 2006) rather than directly into the fluid. It is possible that the bubble phases remain stable all the way to the density where the crystal solution disappears. The bubbles of fluid will expand as the density is raised and gradually convert the system into a fluid filled with chunks of crystal. The transition to a translationally invariant phase is likely to be second order. Unfortunately, the HEG does not have a crystal phase at large N, where these semi-classical ideas could be examined in detail. We suggest that the evidence for negative dielectric function at intermediate densities for N=2 is an indicator of this second order transition. While the infinite N limit does not have a negative dielectric function at any density, it is possible that the closed large N equation for the plasmon two point function, derived in Banks (2018) might capture at least the qualitative features of the second order transition.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fetal liver stromal cells promote hematopoietic cell expansion

Future application of hematopoietic stem and progenitor cells (HSPCs) in clinical therapies largely depends on their successful expansion in vitro. Fetal liver (FL) is a unique hematopoietic organ in which hematopoietic cells markedly expand in number, but the mechanisms involved remain unclear. Stromal cells (StroCs) have been suggested to provide a suitable cellular environment for in vitro expansion of HSPCs. In this study, murine StroCs derived from FL at E14.5, with a high level of Sonic hedgehog (Shh) and Wnt expression, were found to have an increased ability to support the proliferation of HSPCs. This effect was inhibited by blocking Shh signaling. Supplementation with soluble Shh-N promoted the proliferation of hematopoietic cells by activating Wnt signaling. Our findings suggest that FL-derived StroCs support proliferation of HSPCs via Shh inducing an autocrine Wnt signaling loop. The use of FL-derived StroCs and regulation of the Shh pathway might further enhance HPSC expansion.

60 APPLIED LIFE SCIENCES↗