Search NASA⌕ Search

SEARCH · Search NASA

Results for “Engineering science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

SDU7 Interior Liner Testing & Evaluation

The Saltstone Disposal Unit 7 (SDU7) project requested the Savannah River National Laboratory (SRNL), Materials Science & Engineering (MS&E) organization to evaluate an alternative bromobutyl liner and adhesives for potential use in SDU7 based on applicable ASTM testing standards. SRNL performed similar testing for the liner system used in SDU6. Bonded and non-bonded samples of the alternative liner (Blair Rubber Marflex™ RCHB60HT) were subjected to specific ASTM tests after immersion in two Saltstone leachate simulants, designated S1 and S2, for 1000 hours at 60 °C. Immersion exposures were performed at the Savannah River Ecology Laboratory (SREL). Post-immersion testing involved mechanical property and hardness testing of base material, lap-shear testing of bonded samples and rubber-to-concrete paver interrogation. The liner exhibited an approximate 40% drop in tensile strength and 25% drop in elongation at failure from baseline values after immersion, though final values are comparable to previous SDU6 liner values and are within liner manufacturer property ranges. Overall lap-shear strength behavior of the four adhesives showed a similar pattern, with short-term reduction and subsequent increase in peak load values. However, ranking of adhesives varied with the metric used for comparison. Two of the four adhesives tested (Normac 900 and REMA SC 4000) showed overall better behavior, collectively considering immersion performance, lap-shear data and bonded paver interrogation. Lap-shear samples bonded with the REMA adhesive showed the best combination of final retained bond strength, 6-week average bond strength and bond failure mode. Only one paver (REMA SC4000) was noted to have no defects after immersion. This document details the testing performed and provides conclusions and recommendations. The testing suggests that SDU liner performance is highly dependent upon seam integrity, which collectively depends on a combination of adhesive properties, installation workmanship and inspection/quality control.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Towards an IMEX Monolithic ALE Method with Integrated UQ for Multiphysics Shock-hydro

A number of critical science, engineering and advanced technology applications require predictive analysis of complex shock-hydrodynamics of fluid/solid materials with possible electromagnetic interaction. The physical mechanisms include wave-phenomena, material-transport, diffusion, chemical reactions, and electromagnetics. The highly nonlinear multiple-time and length-scale response of these mechanisms include discontinuities formed from shocks, contact surfaces, and complex tabular equations-of-state (EOS). Current dominant computational solution strategies use ad-hoc combinations of operator- splitting, semi-implicit, and explicit time-integration methods and decoupled nonlinear-solvers. While these approaches have enabled progress in forward simulation, the inherited mathematical structure has not provided stability, accuracy and efficiency to resolve all the dynamical time-scales of interest, nor has it enabled integrated fast sensitivity analysis and uncertainty quantification (UQ). This draft report describes initial progress towards developing a new multiphysics shock-hydro capability that is intended to be more robust, mathematically well-structured and can readily be combined with advanced higher-order implicit/explicit (IMEX) time integration and efficient adjoint-enhanced uncertainty quantification (UQ) techniques.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Techno-Economic Analysis: Best Practices and Assessment Tools

A team at Sandia National Laboratories (SNL) recognized the growing need to maintain and organize the internal community of Techno - Economic Assessment analysts at the lab . To meet this need, an internal core team identified a working group of experienced, new, and future analysts to: 1) document TEA best practices; 2) identify existing resources at Sandia and elsewhere; and 3) identify gaps in our existing capabilities . Sandia has a long history of using techno - economic analyses to evaluate various technologies , including consideration of system resilience . Expanding our TEA capabilities will provide a rigorous basis for evaluating science, engineering and technology - oriented projects, allowing Sandia programs to quantify the impact of targeted research and development (R&D), and improving Sandia's competitiveness for external funding options . Developing this working group reaffirms the successful use of TEA and related techniques when evaluating the impact of R&D investments, proposed work, and internal approaches to leverage deep technical and robust, business - oriented insights . The main findings of this effort demonstrated the high - impact TEA has on future cost, adoption for applications and impact metric forecasting insights via key past exemplar applied techniques in a broad technology application space . Recommendations from this effort include maintaining and growing the best practices approaches when applying TEA, appreciating the tools (and their limits) from other national laboratories and the academic community, and finally a recognition that more proposals and R&D investment decision s locally at Sandia , and more broadly in the research community from funding agencies , require TEA approaches to justify and support well thought - out project planning.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

In Response to an International Radiological Incident

National Academies of Sciences, Engineering, and Medicine "Adopting the International System of Units for Radiation Measurements in the United States". September 29-30, 2016, at the National Academies in Washington, DC.

61 RADIATION PROTECTION AND DOSIMETRY↗

From the Starship Enterprise to Los Alamos National Laboratory: Artificial Intelligence and Machine Learning in the NSRC

Artificial Intelligence (AI) conjures up different emotions in different people. Some view it with fear, imagining a malevolent AI similar to Skynet in the Terminator movies. Others see something benevolent, such as the character Data in Star Trek: The Next Generation. Still others see it as a means to advance the frontiers of science, engineering, and technology to new levels not possible through traditional means. At the National Security Research Center (NSRC or the Center), we see AI as a tool to help us go through the monumental tasks we have in digitizing, cataloging, and searching our collections.

97 MATHEMATICS AND COMPUTING↗

R&D for Safety Codes and Standards: Hydrogen Behavior

Overall objectives of the project are: Develop a science & engineering basis for the release, ignition, and combustion behavior of hydrogen across its range of use (including high pressure and cryogenic); and, Facilitate the assessment of the safety (risk) of hydrogen systems and enable use of that information for revising regulations, codes, and standards (RCS), and permitting hydrogen fueling stations.

08 HYDROGEN↗

The archives of the future

The term “artificial intelligence” (AI) - essentially programming machines to think like humans - conjures up different emotions in different people. Some view it with fear, imagining a malevolent AI similar to Skynet in the Terminator movies. Others see something benevolent, such as the character Data in Star Trek: The Next Generation . Still others see it as a means to advance the frontiers of science, engineering and technology to new levels not possible through traditional means. At the National Security Research Center (NSRC or the Center), which is the classified library at Los Alamos National Laboratory, we see AI as a tool to help us go through the monumental tasks we have in digitizing, cataloging, and searching our collections.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Electron Ion Collider Conceptual Design Report 2021

The Conceptual Design Report (CDR) provides the technical reference design for the EIC. It demonstrates the capability of the new facility to meet the performance goals required to deliver the full scientific program recommended by the Department of Energy's Nuclear Science Advisory Committee and the National Research Council of the National Academies of Sciences, Engineering, and Medicine.

43 PARTICLE ACCELERATORS↗

The Role of Innovation in the Electric Utility Sector

Innovation is essential for future power systems to be safe and secure, clean and sustainable, affordable and equitable, and reliable and resilient, according to a recent National Academies report. But state regulatory reforms are needed to encourage adoption of new technologies to support evolution of the nation’s power systems.1 Berkeley Lab's report, The Role of Innovation in the Electric Utility Sector, provides consumer, labor, utility, third-party provider, and clean technology consultant perspectives on this theme. To achieve state targets for clean energy and greenhouse gas emissions, some state regulatory utility commissions are exploring new approaches to spur innovation: -For utilities, regulatory and marketing flexibility, increased funding for demonstration projects, and performance-based ratemaking including multi-year rate plans -For third parties, ways to provide utility customers with innovative products and services directly Among the questions the report addresses: 1. How are consumer advocate views evolving with respect to innovative regulatory and ratemaking approaches? 2. How can utility decarbonization and grid modernization initiatives provide opportunities for local communities and workers to receive tangible benefits and facilitate community support for siting electricity infrastructure? 3. How are electric utilities partnering with technology companies to provide innovative energy management services and sustainable energy solutions for utility customers? 4. What regulatory innovations are public utility commissions exploring to enable third-party providers to participate in the transition to a modern electric system? 5. What regulatory changes are needed to enable innovative solutions from utilities and third parties at the necessary speed and scale to meet state decarbonization goals? The report is the 13th in the Future Electric Utility Regulation series, which taps leading thinkers to tackle complex regulatory issues for electricity. 1 National Academies of Sciences, Engineering, and Medicine. 2021. The Future of Electric Power in the United States. The National Academies Press.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Public Town Hall (2/27/2023) [Slides]

With geopolitical tensions high around the globe (Ukraine, Russia, China…), our mission is more important now than at any point since the Cold War – Our people help ensure the reliability of the deterrent, detect weapons of mass destruction, and advance the frontiers of science, engineering and computing.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Evaluation of Naturally Occurring Be-7 Activity on LANL Stack Filter Clumps

Los Alamos National Laboratory (LANL) is responsible for providing solutions to challenging issues through multidisciplinary science, engineering, and technology that impact national security. As part of the Radioactive Air Emissions Management (RAEM) Team, it is our responsibility to ensure LANL operates within the requirements of the Code of Federal Regulations 40 CFR 61, Subpart H, National Emission Standards for Emissions of Radionuclides Other Than Radon From Department of Energy Facilities (Rad-NESHAP). The standard states, “Emissions of radionuclides to the ambient air from Department of Energy facilities shall not exceed those amounts that would cause any member of the public to receive in any year an effective dose equivalent of 10 mrem/yr” (EPA, 2002) During a routine assessment of LANL’s Rad-NESHAP compliance program, an opportunity for improvement was identified that addresses the evaluation of routine stack samples which potentially have naturally occurring radioactive materials (NORM) on the filter media. In the past and based on professional judgment, detections of NORM such as K-40 and Be-7 typically were rejected from the analytical results. The assessment finding suggested developing a technical criterion to ensure that such rejections were justified, comparing actual measured values with anticipated NORM concentrations for various stacks located at LANL. The significance of accepting or rejecting samples as “true” or “NORM” and its impact on the RAEM’s mission and compliance to the regulations is explained later in the document. Additionally, this document will describe the process and calculations for how such results are to be accepted as actual samples “true positive” or rejected as NORM.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Multi-Frame Gated X-Ray Imager Report

The Multi-Frame Gated X-ray Imager (MGXI) project for the Lawrence Livermore National Laboratory (LLNL) with Project Leader Arthur Carpenter has finished its third year of collaboration with PI Charles Hunt in the ECE Department at UC Davis. This Target Area Science Engineering (TASE) project is part of the National Ignition Facility (NIF) and receives federal funding from the Department of Energy under contract B639825 for the Vacuum Microelectronics (VME) Group to conduct the yearly objectives. The ultimate goal is to construct a burst-mode x-ray imager with multiple frames with as low as ≤25μm spatial resolution and 50ps temporal resolution for use with x-rays in the 5-75keV range; and when coupled to an optically sensitive transmission photocathode (such as an S20) 400-700nm visible range.

42 ENGINEERING↗

Ultrafast Surface Phosphor Thermometry for Pulsed-power and Hostile Environments

Modern concepts for next generation pulsed power (NGPP) are slated to deliver up to ten times the energy of Z today. An increase of this magnitude is concerning insofar that Z currently exhibits sizable amounts of inner magnetically insulated transmission line (MITL) loss current on the order of 5-10%. Loss phenomenon in these systems are complex and electrode heating and subsequent thermal desorption are a leading cause. Rapid heat-driven thermal desorption of contaminants scales as the square of the current. Therefore, even a modest doubling of drive current would yield an ~ 4X in non-linear surface electrode heating, quickening thermal desorption-based current loss. Exacerbating these physics is a current inability to measure ultra fast heating rates (>20°C/ns), which are paramount to benchmarking and code validation critical to NGPP design – as an empirical approach is not viable. Therefore, Ultrafast Photoluminescent Surface Heating Optical Thermometry (UP-SHOT) was developed as a new diagnostic for measurement of GHz-scale electrode heating. The discovery of UP-SHOT leveraged expertise in Engineering Science, Material Science, Pulsed-Power, and the Center for Integrated Nanotechnologies. This report includes information on: 1) The preparation of zinc oxide (ZnO) films, characterization, post-deposition treatments 2) Time-resolved photoluminescence at elevated temperatures and thermographic sensitivity

36 MATERIALS SCIENCE↗

Nested Pebble Bed Blanket (NesPeB)

Recent advances in magnetic confinement fusion technology have attracted billions of dollars of investments in startups from venture capitals and corporations, resulting in the development of devices aiming to demonstrate net energy gain in a self-heated burning plasma, such as SPARC (under construction) and others. However, future fusion power plants must operate in regimes that will require technologies far beyond current experience. According to a National Academies of Science, Engineering, and Medicine report, to have nuclear fusion power plants contributing in a timely manner to the planned reduction of atmospheric carbon dioxide, a pilot plant should be built by 2035, and it should demonstrate fusion power production and the performance of the tritium fuel system (requiring a high enough tritium breeding) by 2040. A recognized key technology gap by [26] is the fusion first wall and blanket since no current blanket concept is considered satisfactory or has been built and proven. The first wall and blanket in magnetic fusion reactors form a vital and complex system, as it must satisfy different functions such as power extraction, tritium breeding, plasma containment, radiation shielding, and safety. The list of design requirements is even longer: high enough tritium production for fusion self-sufficiency, low material activation, decay heat and shutdown dose rates, high thermal efficiency, high-capacity factor, high magnets-divertor-vacuum vessel-first wall life, low corrosion, low cost, and intrinsically safe (requiring minimal licensing). Despite fifty-plus years of research, the first wall and blanket concepts proposed suffer from fundamental technical problems and immaturity (TRL=2-3) that jeopardize the timely delivery of a commercial fusion power plant. A fusion first-wall blanket has never been built nor tested, and a "winning", practical functioning design requires enough engineering margins (high enough tritium breeding considering the uncertainty, etc.), manufacturing simplicity, ease of continuous operation, maintenance, and low cost. A new, groundbreaking blanket concept called "Nested Pebble Bed Blanket" (NesPeB) was developed at ORNL under the successful ARPA-E GAMOW FERMI project (patent application allowed by the USPTO). The NesPeB blanket concept addresses current blanket concepts' shortcomings and technical immaturity, paving the way for accelerated delivery of fusion power plants. NesPeB is based on nested pebbles, which are binary-sized lithium-ceramic pebbles enclosed in "Beryllide" perforated and coated spherical shells, which are also binary-sized, stacked on top of each other, forming a "bed" and cooled by Nitrogen gas also "sweeping" the Helium and Tritium generated by the neutron irradiation of Lithium; the vacuum vessel plasma facing material is Molybdenum-96 and -97 with the first wall cooled by Helium while the divertor armor is made of Tungsten. The simulations of the NesPeB blanket using Fusion Reactors Models Integrator (FERMI) are encouraging as they estimate a tritium breeding ratio (TBR) greater than 1.2 using natural Lithium, acceptable pressure drop, and excellent heat transfer properties. Furthermore, the NesPeB blanket is not limited by magneto-hydro-dynamics (MHD) effects, is designed for online refueling, relies on existing tritium extraction technologies, has a simple construction, and limits the corrosion and chemical reactivity problems. NesPeB has the potential to be transformational and disruptive since it can solve all the main, challenging technical problems of fusion device blankets and accelerate a pilot plant delivery for 10 or more years.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hydrogen Storage Engineering Center of Excellence Adsorbent (Final Report)

The Hydrogen Storage Engineering Center of Excellence (HSECoE) team would like to thank the U.S Department of Energy’s (DOE) Hydrogen and Fuel Cell Technologies Office for the funding to embark on such a large endeavor to develop the material and engineering science related to the use of adsorbents as the storage media for automotive applications. In addition, SRNL would like to thank the many partners of the HSECoE including U.S. automotive manufacturers, GM and Ford, potential component and materials suppliers, United Technologies Research Center, Hexagon Lincoln Composites, and BASF, Universities, Oregon State University, University of Michigan, and the University of Québec, Trois Reveres, along with the Jet Propulsion Laboratory, Pacific Northwest National Laboratory, Los Alamos National Laboratory and Savannah River National Laboratory. Individual specific contributions can be found in individual final reports submitted to DOE. No attempt is made here to attribute contributions to individual people or organizations, illustrating the cooperative arrangement of the team members.

08 HYDROGEN↗

Beyond Magic Barrels: Digital manufacturing for crystallization, process development and optimization of explosive materials: Part II Resveratrol Exemplar

This SAND report summarizes work supported by an Engineering Sciences Research Foundation (ESRF) Lab Directed Research and Development (LDRD) project entitled “Beyond Magic Barrels: Digital manufacturing for crystallization, process development and optimization of explosive materials.” This SAND report is written in two parts with Part 1 discusses recrystallization of our explosive exemplar and Part 2 summarizing our work with recrystallization of resveratrol. We have studied resveratrol recrystallization with a multiscale approach combining experiments, modeling and simulation. At the single crystal scale, microscopy experiments illuminate crystal time-dependent growth rates using advanced image analysis. Bench scale experiments were carried out to look at growth of multiple particles in a small reactor creating thousands of particles and analyzing the results with microscopy and μCT. For the modeling we combine kinetic Monte Carlo (kMC) models with subscale information from density functional theory (DFT) or molecular dynamics. This work is discussed in Part 1 and can also be found in a paper from the project discussing a coarse-grained kMC model specifically developed for resveratrol. For well-mixed systems, we have population balance equations (PBE) linked with species mass conservation forming a set of ordinary differential equations that can be solved quickly. For more complicated geometries, such as the vat crystallization used throughout the complex, a coupled computational fluid dynamic (CFD)/PBE method was developed to account for gradients in temperature and concentration and differences in crystallization rates throughout the domain. These simulations are more complex and require high performance computing. We present results for two cases: 5% seed fast cool with parameters fit to the well-mixed case and 5% seed slow cool using the same parameters. We show reasonable agreement with experiments though are particles are significantly larger than the experiments.

36 MATERIALS SCIENCE↗