Search NASA⌕ Search

SEARCH · Search NASA

Results for “Event Detection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Optimizing Neutrino Flavor Conversion Measurements through Machine Learning

The phenomenon of neutrino flavor conversion whereby the flavor of a neutrino particle can change between its time of production and later detection was the first definitive evidence of physics beyond the Standard Model. Some of the oscillation parameters used to describe this conversion are not yet well measured, leaving important questions still open regarding flavor conversion both in vacuum and as neutrinos travel through matter. NOvA is a long-baseline neutrino oscillation experiment that uses Fermilab's predominantly $\nu_\mu$ NuMI beam. A 14 kton oil-based liquid scintillator far detector 810 km away is used to measure neutrino oscillation through the $\nu_\mu$ disappearance and $\nu_e$ appearance channels. Super-K is a 50 kton water Cherenkov detector, which measures the disappearance of $\nu_e$ produced during solar fusion. The high density environment of the sun decreases the $\nu_e$ survival probability at higher energies observable in Super-K compared to the vacuum-dominated oscillations at lower energies. However, the transition region is overshadowed by radioactive background in the detector. In both of these experiments, the separation of neutrino detection events from background and classification of neutrino flavor are crucial tasks that benefit from the introduction of machine learning. Chapter 1 gives an overview of neutrinos and the context under which flavor conversion is measured in this dissertation. Chapters 2-7 present the results of a Bayesian sampling approach for the latest NOvA 3-flavor oscillation analysis with $26.6 \times 10^{20}$ protons on target in neutrino mode and $12.5 \times 10^{20}$ in antineutrino mode collected over 10 years. Chapters 8-13 present the results of extending the Super-K solar analysis to lower energies during its fourth phase with 2970 days of livetime.

Yankelevich, Alejandro Jaime [UC, Irvine] (ORCID:0↗

Benefits and challenges of vibroacoustic process monitoring to support operators in nuclear research facilities

According to the International Atomic Energy Agency in 2024, global nuclear energy capacity is projected to increase by 2.5 times by 2050 in their high-case scenario. Research on the laboratory scale of innovative processes within nuclear facilities is ongoing to improve nuclear fuel cycle capabilities. Vibroacoustic process monitoring of these techniques has potential to inform operators regarding process specific metrics, predictive maintenance, and anomalous event detection. Additionally, this type of monitoring has the potential to aid in nuclear safeguards. Challenges regarding vibroacoustic monitoring in these environments include high temperature, high radiation, limited access, and shielded equipment limiting sensor type and placement. Microphones, accelerometers, and temperature sensors were deployed both inside and near these environments during operation to determine environment driven limitations, sound attenuation of containment enclosures, process specific metrics, and future potential of vibroacoustic monitoring in these environments. Overall, this work highlights the benefits and limitations of vibroacoustic process monitoring in nuclear research facilities.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Study of the Production of Radioactive Isotopes through Cosmic Muon Spallation in KamLAND

Radioactive isotopes produced through cosmic muon spallation are a background for rare event detection in {nu} detectors, double-beta-decay experiments, and dark-matter searches. Understanding the nature of cosmogenic backgrounds is particularly important for future experiments aiming to determine the pep and CNO solar neutrino fluxes, for which the background is dominated by the spallation production of {sup 11}C. Data from the Kamioka Liquid scintillator Anti-Neutrino Detector (KamLAND) provides valuable information for better understanding these backgrounds, especially in liquid scintillator, and for checking estimates from current simulations based upon MUSIC, FLUKA, and Geant4. Using the time correlation between detected muons and neutron captures, the neutron production yield in the KamLAND liquid scintillator is measured to be (2.8 {+-} 0.3) x 10{sup -4} n/({mu} {center_dot} (g/cm{sup 2})). For other isotopes, the production yield is determined from the observed time correlation related to known isotope lifetimes. We find some yields are inconsistent with extrapolations based on an accelerator muon beam experiment.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Top quark mass: Latest CDF results, Tevatron combination and electroweak implications

A summary of the most up-to-date top quark mass measurements at CDF is presented. These analyses use top-antitop candidate events detected in the CDF experiment at the Tevatron collider with an integrated luminosity of up to {approx}3/fb. The combination of all those measurements together with the corresponding top mass measurements from the concurrently running D0 experiment at the Tevatron yields a world average of M{sub t} = [173.1 {+-} 0.6(stat.) {+-} 1.1(syst.)] GeV/c{sup 2}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Energy efficient sensor network implementations

In this paper, we discuss a low power embedded sensor node architecture we are developing for distributed sensor network systems deployed in a natural environment. In particular, we examine the sensor node for energy efficient processing-at-the-sensor. We analyze the following modes of operation; event detection, sleep(wake-up), data acquisition, data processing modes using low power, high performance embedded technology such as specialized embedded DSP processors and a low power FPGAs at the sensing node. We use compute intensive sensor node applications: an acoustic vehicle classifier (frequency domain analysis) and a video license plate identification application (learning algorithm) as a case study. We report performance and total energy usage for our system implementations and discuss the system architecture design trade offs.

99 GENERAL AND MISCELLANEOUS↗

Results from a Field Trial of the Radio Frequency Based Cylinder Accountability and Tracking System at the Global Nuclear Fuel Americas Fuel Fabrication Facility

The Cylinder Accountability and Tracking System (CATS) is a tool designed for use by the International Atomic Energy Agency (IAEA) to improve overall inspector efficiency through real-time unattended monitoring of cylinder movements, site specific rules-based event detection, and the capability to integrate many types of monitoring technologies. The system is based on the tracking of cylinder movements using (radio frequency) RF tags, and the collection of data, such as accountability weights, that can be associated with the cylinders. This presentation will cover the installation and evaluation of the CATS at the Global Nuclear Fuels (GNF) fuel fabrication facility in Wilmington, NC. This system was installed to evaluate its safeguards applicability, operational durability under operating conditions, and overall performance. An overview of the system design and elements specific to the GNF deployment will be presented along with lessons learned from the installation process and results from the field trial.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The direct detection of boosted dark matter at high energies and PeV events at IceCube

We study the possibility of detecting dark matter directly via a small but energetic component that is allowed within present-day constraints. Drawing closely upon the fact that neutral current neutrino nucleon interactions are indistinguishable from DM-nucleon interactions at low energies, we extend this feature to high energies for a small, non-thermal but highly energetic population of DM particle χ, created via the decay of a significantly more massive and long-lived non-thermal relic ϕ, which forms the bulk of DM. If χ interacts with nucleons, its cross-section, like the neutrino-nucleus coherent cross-section, can rise sharply with energy leading to deep inelastic scattering, similar to neutral current neutrino-nucleon interactions at high energies. Thus, its direct detection may be possible via cascades in very large neutrino detectors. As a specific example, we apply this notion to the recently reported three ultra-high energy PeV cascade events clustered around 1−2 PeV at IceCube (IC). We discuss the features which may help discriminate this scenario from one in which only astrophysical neutrinos constitute the event sample in detectors like IC.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Phase-Space Detection of Cyber Events

Energy Delivery Systems (EDS) are a network of processes that produce, transfer and distribute energy. EDS are increasingly dependent on networked computing assets, as are many Industrial Control Systems. Consequently, cyber-attacks pose a real and pertinent threat, as evidenced by Stuxnet, Shamoon and Dragonfly. Hence, there is a critical need for novel methods to detect, prevent, and mitigate effects of such attacks. To detect cyber-attacks in EDS, we developed a framework for gathering and analyzing timing data that involves establishing a baseline execution profile and then capturing the effect of perturbations in the state from injecting various malware. The data analysis was based on nonlinear dynamics and graph theory to improve detection of anomalous events in cyber applications. The goal was the extraction of changing dynamics or anomalous activity in the underlying computer system. Takens' theorem in nonlinear dynamics allows reconstruction of topologically invariant, time-delay-embedding states from the computer data in a sufficiently high-dimensional space. The resultant dynamical states were nodes, and the state-to-state transitions were links in a mathematical graph. Alternatively, sequential tabulation of executing instructions provides the nodes with corresponding instruction-to-instruction links. Graph theorems guarantee graph-invariant measures to quantify the dynamical changes in the running applications. Results showed a successful detection of cyber events.

cyber anomaly detection↗

FY2018 Discovery Through Situational Awareness: Anomalies, Oscillations, and Classification

This technical report is a summary of work performed under the DOE GMLC program under the task titled “Discovery through Situational Awareness”. The focus of this work was to apply big data, statistical techniques to PMU data to do the following: 1) baseline PMU data and find anomalies with a focus on phase angle pairs, 2) identify the frequencies of dominant modal oscillations between different parts of a power system, and 3) identify and classify frequency events in PMU data. This work was performed on PMU data from the Western Interconnect. Many of these algorithms will be applied to wide area phase angle pair data on the Eastern Interconnect in a tool called ESAMS (Eastern Interconnect Situational Awareness Monitoring System). ESAMS was built by EPG (Electric Power Group) and PNNL and is currently being installed on the Eastern Interconnect. The results discussed in this report were made from 14 PMUs from data ranging from Oct 2016 to May 2018. The PMU data were measured 60 times each second. Fourteen phase angle pairs were included, with reactive and active power being calculated at 14 sites. All results have been de-identified for this report. The methodologies applied in the ESAMS tool are described in Section 2. A baseline of PMU data is created using the last 120 days of data. This baseline describes typical behavior as understood from the data. The baseline is then applied to the next day’s data and anomalies from that baseline are identified. Plots are created to help describe what is anomalous during that specific moment in time. These algorithms are currently being installed on the Eastern Interconnect. FY19 work will include discussing the results and findings from the ESAMS tool. A new method of identifying the frequencies of dominant modal oscillations between different parts of a power system is described in Section 3. A list of 199 frequency events provided by Bonneville Power Administration were used to create algorithms to detect frequency events and to create classification rules that can be used to identify future frequency events. Section 4 discusses the results the performance of 7 different event detection, clustering-based methods. Accuracy percentages ranged from 93.59% to 99.16%, with most methods being very fast. GBM (Gradient Boosting Machine) performed well and quickly. These 7 different methods were also tested to determine how well each built classification rules on training data and then applied those rules to identify future frequency events. Accuracy percentages ranged from 89.09% to 99.9%, with all methods performing quickly. GLM (General Linear Model) was viewed as the top performer when considering accuracy and processing time. Because the list of events consisted of 80% of them as active power events and only 20% as faults, all methods struggled to identify events as faults. Small faults were especially difficult to identify. A separate algorithm was created to help with this. Additional work will be done in FY19 on event detection using more data and more events and refinements to the methods.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Automatic detection of microlensing events in the galactic bulge using machine learning techniques

The Wide Field Infrared Survey Telescope (WFIRST) is a NASA flagship mission scheduled to launch in mid-2020, with more than one year of its lifetime dedicated to microlensing survey. The survey is to discover thousands of exoplanets near or beyond the snowline via their microlensing light curve signatures, enabling a Kepler-like statistical analysis of planets at ~1-10 AU from their host stars and potentially revolutionizing our understanding of planet formation. The goal of our work is to create an automated system that has the ability to efficiently process and classify large-scale astronomical datasets that missions such as WFIRST will produce. In this paper, we discuss our framework that utilizes features election and parameter optimization for classification models to automatically differentiate the different types of stellar variability and detect microlensing events.

Shvartzvald, Yossi↗

Adaptive Self-Tuning of Signal Detection Parameters

The quality of automatic detections from sensor networks depends on a large number of data processing parameters that interact in complex ways. The largely manual process of identifying effective parameters is painstaking and does not guarantee that the resulting controls are the optimal configuration settings, yet achieving superior automatic detection of events is closely related to these parameters. We present an automated sensor tuning (AST) system that tunes effective parameter settings for each sensor detector to the current state of the environment by leveraging cooperation within a neighborhood of sensors. After a stabilization period, the AST algorithm can adapt in near real-time to changing conditions and automatically self-tune a signal detector to identify (detect) only signals from events of interest. The overall goal is to reduce the number of missed legitimate event detections and the number of false event detections. Our current work focuses on reducing false signal detections early in the seismic signal processing pipeline, which leads to fewer false events and has a significant impact on reducing analyst time and effort. Applicable both for existing sensor performance boosting and new sensor deployment, this system provides an important new method to automatically tune complex remote sensing systems. Systems tuned in this way will achieve better performance than is currently possible by manual tuning, and with much less time and effort devoted to the tuning process. With ground truth on detections from a seismic sensor network monitoring the Mount Erebus Volcano in Antarctica, we show that AST increases the probability of detection while decreasing false alarms.

58 GEOSCIENCES↗

Small Seismic Events in Oklahoma Detected and Located by Machine Learning–Based Models

A complete earthquake catalog is essential to understand earthquake nucleation and fault stress. Following the Gutenberg–Richter law, smaller, unseen seismic events dominate the earthquake catalog and are invaluable for revealing the fault state. The published earthquake catalogs, however, typically miss a significant number of small earthquakes. Part of the reason is due to a limitation of conventional algorithms, which can hardly extract small signals from background noise in a reliable and efficient way. To address this challenge, we utilized a machine learning method and developed new models to detect and locate seismic events. These models are efficient in processing a large amount of seismic data and extracting small seismic events. We applied our method to seismic data in Oklahoma, United States, and detected ~14 times more earthquakes compared with the standard Oklahoma Geological Survey catalog. The rich information contained in the new catalog helps better understand the induced earthquakes in Oklahoma.

58 GEOSCIENCES↗

Method for early detection of cooling-loss events

A method of detecting cooling-loss event early is provided. The method includes defining a relative humidity limit and change threshold for a given space, measuring relative humidity in the given space, determining, with a processing unit, whether the measured relative humidity is within the defined relative humidity limit, generating a warning in an event the measured relative humidity is outside the defined relative humidity limit and determining whether a change in the measured relative humidity is less than the defined change threshold for the given space and generating an alarm in an event the change is greater than the defined change threshold.

42 ENGINEERING↗

Method for early detection of cooling-loss events

A method of detecting cooling-loss event early is provided. The method includes defining a relative humidity limit and change threshold for a given space, measuring relative humidity in the given space, determining, with a processing unit, whether the measured relative humidity is within the defined relative humidity limit, generating a warning in an event the measured relative humidity is outside the defined relative humidity limit and determining whether a change in the measured relative humidity is less than the defined change threshold for the given space and generating an alarm in an event the change is greater than the defined change threshold.

42 ENGINEERING↗

Observations of low energy gamma-ray bursts with SAS-2

The present paper reports on the low-energy gamma-ray bursts observed by the plastic scintillator anticoincidence dome of the Small Astronomy Satellite-2 (SAS-2) gamma-ray telescope. SAS-2 detected two events observed by other satellites and discovered one which was subsequently confirmed by other satellite observations. Two events seen by other satellites were not detected by SAS-2, probably due to earth occultation. The event detection threshold for SAS-2 was almost two orders of magnitude lower than that of the Vela satellites.

Oegelman, H.↗

Systems and methods for detecting a failure event in a field programmable gate array

An embodiment generally relates to a method of self-detecting an error in a field programmable gate array (FPGA). The method includes writing a signature value into a signature memory in the FPGA and determining a conclusion of a configuration refresh operation in the FPGA. The method also includes reading an outcome value from the signature memory.

Ng, Tak-Kwong↗

Detecting flash drought events to inform adaptive water management

Abstract: Flash droughts are characterized by a rapid onset of drought conditions, a common feature among various indicators of these events. The lack of a standardized definition and indicator makes flash droughts particularly challenging to predict and manage. We test six state-of-the-art flash drought indicators using 41 years of daily data across all Hydrological Unit Code 4 (HUC4) regions in the contiguous United States. Our results show substantial disagreements among indicators, suggesting that the detection of a flash drought event strongly depends on the choice of indicator. From the perspective of informing management and operations, an open challenge remains: which flash drought indicator should be used to trigger operational adaptations? To this end, we propose a methodological framework that informs adaptive actions by regionally assessing the level of agreement between different indicators. The regional differences in hydroclimatic conditions are expected to be reflected in the level of agreement between indicators. To better inform adaptive actions, the framework will also consider the impacted sectoral water uses and their varying response times. The insights gained from this study improve the understanding of how these different flash drought indicators capture the different aspects of regional differences and impacted sectors. Furthermore, this information can support more targeted adaptive actions to mitigate adverse impacts through improved preparedness and response strategies.

climate resilience↗

Classification and Localization of Fracture-Hit Events in Low-Frequency Distributed Acoustic Sensing Strain Rate with Convolutional Neural Networks

Summary Distributed acoustic sensing (DAS) has been used in the oil and gas industry as an advanced technology for surveillance and diagnostics. Operators use DAS to monitor hydraulic fracturing activities, examine well stimulation efficacy, and estimate complex fracture system geometries. Particularly, low-frequency DAS can detect geomechanical events such as fracture hits because hydraulic fractures propagate and create strain rate variations in the rock. Analysis of DAS data today is mostly done post-job and subject to interpretation methods. However, the continuous and dense data stream generated live by DAS poses the opportunity for more efficient and accurate real-time data-driven analysis. The objective of this study is to develop a machine learning-based workflow that can identify and locate fracture-hit events in simulated strain rate responses correlated with low-frequency DAS data. In this paper, “fracture hit” refers to a hydraulic fracture originating from a stimulated well intersecting an offset well. We start with building a single fracture propagation model to produce strain rate patterns observed at a hypothetical monitoring well. This model is used to generate two sets of strain rate responses with one set containing fracture-hit events. The labeled synthetic data are then used to train a custom convolutional neural network (CNN) model for identifying the presence of fracture-hit events. The same model is trained again for locating the event with the output layer of the model replaced with linear units. We achieved near-perfect predictions for both event classification and localization. These promising results prove the feasibility of using CNN for real-time event detection from fiber-optic sensing data. Additionally, we use edge detection techniques to recognize fracture-hit event patterns in strain rate images. The fracture-hit location can be identified using recognized pixels in the image. The accuracy of edge detection-based location identification is also plausible, but edge detection is dependent on the assumption of pattern shape and image quality, hence it is less robust compared to CNN models. This comparison further supports the need for CNN applications in image-based real-time fiber-optic sensing event detection.

Engineering↗