Search NASA⌕ Search

SEARCH · Search NASA

Results for “GARNETS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Tuner of a Second Harmonic Cavity of the Fermilab Booster

Introducing a second harmonic cavity in the accelerating system of the Fermilab Booster promises significant reduc-tion of the particle beam loss during the injection, transi-tion, and extraction stages. To follow the changing energy of the beam during acceleration cycles, the cavity is equipped with a tuner that employs perpendicularly biased AL800 garnet material as the frequency tuning media. The required tuning range of the cavity is from 75.73 MHz at injection to 105.64 MHz at extraction. This large range ne-cessitates the use of a relatively low bias magnetic field at injection, which could lead to high RF loss power density in the garnet, or a strong bias magnetic field at extraction, which could result in high power consumption in the tuner’s bias magnet. The required 15 Hz repetition rate of the device and high sensitivity of the local RF power loss to the level of the magnetic field added to the challenges of the bias system design. In this report, the main features of a proposed prototype of the second harmonic cavity tuner are presented.

43 PARTICLE ACCELERATORS↗

Optimizing the tuning range of the Fermilab Recycler 53MHz RF cavities by exploiting the avoided crossing of the tuner and cavity modes

The electromagnetic eigenmodes of the Fermilab Recycler RF cavities were simulated with ACE3P running on NERSC's 'Perlmutter' supercomputer in an attempt to optimize their tuning range to comfortably support slip-stacking. A theory, based on coupled circuits and avoided crossings, was developed to explain the origins of the tuning range for tuner-cavity waveguide systems. This provided a logical, rigorous method to carry out this optimization, although engineering problems due to high voltages in the tuner and the operational $\mu$ range of the garnet had to be carefully implemented. It was shown that the desired goal of 10kHz of tuning was not attainable with the current cavity specifications. The maximum tuning range obtained was 5.59kHz for a single tuner with a coaxial line of length 63in. A double tuner cavity was also studied using the simulation software, although with little improvement in the tuning range. A promising technique to improve the tuning range involving the desynchronization of the garnets' magnetic permeabilities is proposed.

43 PARTICLE ACCELERATORS↗

Magnonic crystals-based tunable microwave phase shifters

Tunable microwave phase shifters using magnetostatic backward volume waves in yttrium iron garnet/gadolinium gallium garnet thin film-based one-dimensional (1-D) and two-dimensional (2-D) magnonic crystals (MCs) are reported in this paper. Large differential phase shifts with small insertion loss variations were achieved in the passbands neighboring the bandgaps by tuning of the bias magnetic field. Large phase tuning rates up to 13.48 °/(Oe cm) and 25.9 °/(Oe cm) together with small insertion loss variations of 2.08 dB/cm and 0.97 dB/cm were demonstrated in the 1-D and 2-D MCs, respectively. An excellent agreement between the measured and the calculated results based on Walker's equation was obtained.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of photon–magnon coupling in a YIG-film split-ring resonant system

By using the stripline Microwave Vector–Network Analyser Ferromagnetic Resonance and Time Domain spectroscopy techniques, we study a strong coupling regime of magnons to microwave photons in the planar geometry of a lithographically formed split-ring resonator (SRR) loaded by a single-crystal epitaxial yttrium–iron–garnet (YIG) film. Strong anti-crossing of the photon modes of SRR and of the magnon modes of the YIG film is observed in the applied-magnetic-field resolved measurements. The coupling strength extracted from the experimental data reaches 9% at 3 GHz. Theoretically, we propose an equivalent circuit model of the SRR loaded by a magnetic film. This model follows from the results of our numerical simulations of the microwave field structure of the SRR and of the magnetisation dynamics in the YIG film driven by the microwave currents in the SRR. The results obtained with the equivalent-circuit model are in good agreement with the experiment. This model provides a simple physical explanation of the process of mode anti-crossing. Our findings are important for future applications in microwave quantum photonic devices as well as in nonlinear and magnetically tuneable metamaterials exploiting the strong coupling of magnons to microwave photons.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Theory of coherence in Bose-Einstein condensation phenomena in a microwave-driven interacting magnon gas

Strong experimental evidences of the formation of quasiequilibrium Bose-Einstein condensation (BEC) of magnons at room temperature in a film of yttrium iron garnet (YIG) excited by microwave radiation have been recently reported. Here we present a theory for the dynamics of the magnon gas driven by a microwave field far out of equilibrium that provides rigorous support for the formation of a BEC of magnons in a YIG film magnetized in the plane. We show that if the microwave driving power exceeds a threshold value the nonlinear magnetic interactions create cooperative mechanisms for the onset of a phase transition leading to the spontaneous generation of quantum coherence and magnetic dynamic order in a macroscopic scale. The theoretical results agree with the experimental data for the intensity and the decay rate of the Brillouin light scattering from the BEC as a function of power and for the microwave emission from the uniform mode generated by the confluence of BEC magnon pairs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Crossover behavior in the phase transition of the Bose-Einstein condensation in a microwave-driven magnon gas

A magnon gas in a film of yttrium iron garnet driven by microwave radiation exhibits Bose-Einstein condensation (BEC) when the driving power exceeds a critical value. We show that the nature and the critical exponents of the BEC transition change dramatically if the BEC magnons are significantly coupled to the zone-center magnons. The theoretical results explain the diverse behavior of the order parameter inferred from the experimental data for the light scattering and the microwave emission from the BEC observed with coherent and incoherent microwave pumping.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electroacoustic Excitation of Spin Waves and Their Detection due to the Inverse Spin Hall Effect

Abstract—In this paper, we present theoretical and experimental results on the excitation and detection of spin waves and spin currents in multifrequency bulk acoustic wave resonators containing iron–yttrium garnet (YIG) films in contact with the Pt film. Acoustically excited magnetic precession under the resonator conditions was established to produce spin pumping that also has a resonance character. A significant asymmetry in the frequency dependence of the voltage signal detected on the Pt film is revealed with respect to the frequency of the magnetoelastic resonance and is confirmed by theoretical calculations. Acoustic resonator spectroscopy in combination with the electric detection of magnetic dynamics using the inverse spin Hall effect is shown to be of interest for studying the dispersion of spin waves, as well as magnetic and magnetoelastic parameters of ferromagnetic films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pristine Interface between Lithium Lanthanum Zirconate and Lithium Manganese Oxide by Pulsed Laser Deposition

Solid state lithium-ion batteries have garnered increasing interest in recent years due to several potential advantages over liquid-electrolyte based systems. The possibility of integrating the lithium garnet oxide, Li 6.75 La 3 Zr 1.75 Ta 0.25 O 12 (LLZTO), with the high voltage cathode, spinel Li x Mn 2 O 4 (LMO), is evaluated here. Thin film bilayer structures are prepared by pulsed laser deposition on MgO (001) substrates and characterized by x-ray diffraction and transmission electron microscopy. The LLZTO is grown by an alternating layer-by-layer deposition of LLZTO and Li 3 N and subsequently annealed for several hours at 575 °C to promote crystallinity. Growth of crystalline LMO with a pristine interface to LLZTO is achieved by gentle heat treatment (500 °C) to remove surface carbonate from the electrolyte and by cathode growth at a low temperature of 250 °C. Higher temperature depositions (330 – 450 °C) result in reaction between the two materials and the appearance of Li 2 MnO 3 , which may be in part due to the presence of excess lithium in the electrolyte layer. Because fully lithiated LiMn 2 O 4 has a voltage of ≈3.7 V versus Li+/Li, the observation of a well-defined interface, free of impurity phases and with no interdiffusion of elements, indicates LLZTO is stable to at least 3.7 V.

Garnet LLZO↗

Excellent stability of a lithium-ion-conducting solid electrolyte upon reversible Li + /H + exchange in aqueous solutions

Batteries with an aqueous catholyte and a Li metal anode have attracted interest owing to their exceptional energy density and high charge/discharge rate. The long-term operation of such batteries requires that the solid electrolyte separator between the anode and aqueous solutions must be compatible with Li and stable over a wide pH range. Unfortunately, no such compound has yet been reported. In this study, an excellent stability in neutral and strongly basic solutions was observed when using the cubic Li 7 La 3 Zr 2 O 12 garnet as a Li-stable solid electrolyte. The material underwent a Li + /H + exchange in aqueous solutions. Nevertheless, its structure remained unchanged even under a high exchange rate of 63.6%. When treated with a 2 M LiOH solution, the Li + /H + exchange was reversed without any structural change. Furthermore, these observations suggest that cubic Li 7 La 3 Zr 2 O 12 is a promising candidate for the separator in aqueous lithium batteries.

25 ENERGY STORAGE↗

Photoluminescence Characteristics of Yag:Ce, Gd Based Phosphors with Different Prehistories

Luminescence characteristics of yttrium-aluminum garnet based phosphor samples differed by their elemental composition and prehistory of synthesis are studied. The morphology, structure, and elemental composition of phosphor samples, their excitation and emission spectra, efficiency of phosphor conversion of chip emission, and kinetics of luminescence decay are measured. The emission characteristics of phosphors are compared with their structural properties and elemental composition.

36 MATERIALS SCIENCE↗

Investigation of Heating of Optical Elements During Formation of High-Power CW Fiber Laser Radiation

The problem of heating of optical components during the formation of the high-power continuous-wave fiber laser radiation is considered. The results of experimental measurements of heating of optical components made of the domestic quartz glass of the KU-1 brand and yttrium aluminum garnet crystal are presented. The time dependence of the heating temperature of the optical components and their stationary temperature are investigated as functions of the laser radiation power.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Solid-state synthesis of YAG powders through microwave coupling of oxide/carbon particulate mixtures

The rapid synthesis of yttrium aluminum garnet (Y 3 Al 15 O 12 , YAG) powder was investigated through the use of microwave irradiation of the oxide precursor system. For this investigation, an external hybrid heating source was not used. Instead, the rapid heating of the precursor materials (yttria and alumina powders, which are typically transparent to 2.45 GHz microwaves) was initiated by mixing an intrinsic absorbing material (carbon) into the original oxide precursors. The effect of the carbon characteristics, such as carbon source, concentration, particle size, and agglomerate microstructure were evaluated on the efficiency of coupling and resultant oxide reaction. The microwave power was varied to optimize the YAG conversion and eliminate intermediate phase formation. Interactions between the conductive carbon particles and the dielectric oxides within the microwave exposure produced local arching and micro-plasma formation within the powder bed, resulting in the rapid formation of the refractory YAG composition. This optimal conduction led to temperatures of 1000°C that could be achieved in less than 5 min resulting in the formation of > 90 vol% YAG. The understanding of a conductor/dielectric particulate system here, provided insight into possible application of similar systems where microwave irradiation could be used for enhanced solid-state formation, local melting events, and gas phase reactions with a composite powder media.

36 MATERIALS SCIENCE↗

Spin waves in YIG based magnonic networks: Design and technological aspects

Microwaveguides for spin waves based on yttrium iron garnet films and cross-like structures built on such waveguides are experimentally studied. Additionally, effects of the waveguides geometry, location of the microantennas for excitation and detection of the spin waves, and geometry of the waveguides junctions on the spin wave excitation and propagation efficiency are discussed.

36 MATERIALS SCIENCE↗

Structure and magnetic properties of new Be-substituted langasites A{sub 3}Ga{sub 3}Ge{sub 2}BeO{sub 14} (A=Pr, Nd, and Sm)

Langasites have been studied extensively in past for their functional properties and use in telecommunication. A thorough understanding of their ground state is limited by the difficulty in synthesizing new members belonging to this series due to the formation of competing phases such as the garnets. Three magnetic langasites A{sub 3}Ga{sub 3}Ge{sub 2}BeO{sub 14} (A=Pr, Nd, and Sm) and a non-magnetic lattice standard La{sub 3}Ga{sub 3}Ge{sub 2}BeO{sub 14} were synthesized using the ceramic method. These were further characterized by X-ray diffraction, magnetization, magnetic susceptibility and heat capacity measurements. All three langasites exhibit net antiferromagnetic interactions at low temperatures and no evidence of long range magnetic ordering was observed down to 0.350 K. - Graphical abstract: Kagome network formed by the magnetic ions in the new Be-langasites. The ground states of three new members were explored using different physical property measurements such as X-ray diffraction, magnetization, magnetic susceptibility and heat capacity (a–d show refinement patterns for the langasites). These can be added to the list of candidate spin liquid materials. - Highlights: • Four new langasites A{sub 3}Ga{sub 3}Ge{sub 2}BeO{sub 14} (A=La, Pr, Nd, and Sm) were synthesized. • These were characterized using physical and magnetic property measurements. • These langasites exhibit net antiferromagnetic interactions at low temperatures. • No evidence of long range magnetic ordering was observed down to 0.350 K. • Can be potential Spin liquid candidates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructure characterization via stereological relations — A shortcut for beginners

Stereological relations that can be routinely applied for the quantitative characterization of microstructures of heterogeneous single- and two-phase materials via global microstructural descriptors are reviewed. It is shown that in the case of dense, single-phase polycrystalline materials (e.g., transparent yttrium aluminum garnet ceramics) two quantities have to be determined, the interface density (or, equivalently, the mean chord length of the grains) and the mean curvature integral density (or, equivalently, the Jeffries grain size), while for two-phase materials (e.g., highly porous, cellular alumina ceramics), one additional quantity, the volume fraction (porosity), is required. The Delesse–Rosiwal law is recalled and size measures are discussed. It is shown that the Jeffries grain size is based on the triple junction line length density, while the mean chord length of grains is based on the interface density (grain boundary area density). In contrast to widespread belief, however, these two size measures are not alternative, but independent (and thus complementary), measures of grain size. Concomitant with this fact, a clear distinction between linear and planar grain size numbers is proposed. Finally, based on our concept of phase-specific quantities, it is shown that under certain conditions it is possible to define a Jeffries size also for two-phase materials and that the ratio of the mean chord length and the Jeffries size has to be considered as an invariant number for a certain type of microstructure, i.e., a characteristic value that is independent of the absolute size of the microstructural features (e.g., grains, inclusions or pores). - Highlights: • Stereology-based image analysis is reviewed, including error considerations. • Recipes are provided for measuring global metric microstructural descriptors. • Size measures are based on interface density and mean curvature integral density. • Phase-specific quantities and a generalized Jeffries size are introduced. • Linear and planar grain size numbers are clearly distinguished and explained.

36 MATERIALS SCIENCE↗

The synthesis and optical property of solid-state-prepared YAG:Ce phosphor by a spray-drying method

Ce{sup 3+}-activated yttrium aluminum garnet (Y{sub 3}Al{sub 5}O{sub 12}:Ce, YAG:Ce) powder as luminescent phosphor was synthesized by the solid-state reaction method. The phase identification, microstructure and photoluminescent properties of the products were investigated by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), absorption spectrum and photoluminescence (PL) analysis. Spherical phosphor particle is considered better than irregular-shaped particle to improve PL property and application, so this phosphor was granulated into a sphere-like shape by a spray-drying device. After calcinating at 1500 deg. C for 0, 4, and 8 h, the product was identified as YAG and CeO{sub 2} phases. The CeO{sub 2} phase content is decreased by increasing the calcination time or decreasing the Ce{sup 3+} doping content. The product showed higher emission intensity resulted from more Ce{sup 3+} content and larger grain size. The product with CeO{sub 2} was found to have lower emission intensity. This paper presents the crystal structures of Rietveld refinement results of powder XRD data.

36 MATERIALS SCIENCE↗

Crystallization kinetics and densification of YAG nanoparticles from various chelating agents

Yttrium aluminium garnet (YAG, Y{sub 3}Al{sub 5}O{sub 12}) nanoparticles were prepared using sonochemical sol-gel method with three different chelating agents and the effect of crystallization kinetics was investigated with differential scanning calorimetry-thermogravimetry (DSC-TG). The activation energy values of crystallization for the as-synthesized YAG nanoparticles using citric acid (CA), glycine (G) or a mixture of citric acid-glycine (CA-G), as chelating agents were found to be 160.5, 142.2 and 140.4 kJ mol{sup -1} and the corresponding Avarami constants were 2.2, 2.1 and 1.9, respectively. Samples produced with the mixed chelating agent under sonification, could be crystallized to single phase YAG nanoparticles (10-65 nm) after annealing at 1100 deg. C. Pellets made from the annealed YAG particles could be sintered to a relative density greater than 99% at 1500 deg. C with a grain size of 4.5 {mu}m, made up of secondary particles formed from primary nano-crystals within the grains. Grain size and relative density increased with different chelating agents from CA to G and CA-G in the increasing order when YAG samples were sintered. Grain growth and densification occurred at a relatively low temperature of 1500 deg. C as compared to over 1800 deg. C in solid-state reactions.

36 MATERIALS SCIENCE↗

Modification of Bi:YIG film properties by substrate surface ion pre-treatment

Highlights: • Effects of substrates ion beam treatment on magnetoptical properties Bi:YIG films. • Substrate surface damage results in sign inversion of the magneto-optical effects. • Atomically smooth films growth takes place on low energy ions treated substrates. • High energy ions treatment results in selective nucleation mechanism of the growth. - Abstract: The effect of a controlled ion beam pre-treatment of (1 1 1)-oriented Gd{sub 3}Ga{sub 5}O{sub 12} substrates on the magneto-optical properties and surface morphology of the ultrathin bismuth-substituted yttrium–iron garnet films with a composition Bi{sub 2.8}Y{sub 0.2}Fe{sub 5}O{sub 12} was studied. It has been shown that the observed sign inversion of magneto-optical effects (Faraday rotation and magnetic circular dichroism) observed in films that were deposited on the GGG substrate pre-treated by 1 keV and 4 keV Ar{sup +} ion beams is a result of the substrate surface amorphization caused by the ion bombardment.

36 MATERIALS SCIENCE↗