Identification of Soil Associations in South Dakota on ERTS a Imagery
Application of ERTS-1 imagery for identification of soil associations in South Dakota
Westin, F. C.↗
SEARCH · Search NASA
Results for “Identification”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Identification and Mapping of Coal Refuse Banks and Other Targets in the Anthracite Region
Identification and mapping of coal refuse banks and other targets in anthracite region of Pennsylvania
Borden, F. Y.↗
Identification and interpretation of tectonic features from ERTS-1 imagery
The author has identified the following significant results. Many criteria of active or recent fault movements are observable in the imagery. It was observed that where earthquake epicenter clusters occur, evidence of recent fault movements is generally observed. The opposite was not necessarily true as there are areas where evidence of recent faulting is observed, often along major known faults which are peculiarly devoid of significant seismicity. A tentative conclusion is that the seismicity pattern alone can often be a misleading criteria for potential earthquake hazards. The feasibility of recognizing geomorphic criteria of recent fault movement from ERTS-1 imagery suggests that ERTS imagery should be used to map potentially active faults and utilize this data to develop better criteria for the identification of areas prone to future earthquakes. An apparent correlation was observed between the distribution of mercury deposits in the California Coast Range Province and transverse fault zones trending west-northwest oblique to the trend of the San Andreas system. The significance of this correlation and the full extent of its implication on mercury exploration is under study.
Abdel-Gawad, M.↗
Identification, definition and mapping of terrestrial ecosystems in interior Alaska
The author has identified the following significant results. A transect of the Tanana River Flats to Murphy Dome, Alaska was accomplished. The transect includes an experimental forest and information on the range of vegetation-land form types. Multispectral black and white prints of the Eagle Summit Research Area, Alaska, were studied in conjunction with aerial photography and field notes to determine the characteristics of the vegetation. Black and white MSS prints were compared with aerial photographs of the village of Wiseman, Alaska. No positive identifications could be made without reference to aerial photographs or ground truth data. Color coded density slice scenes of the Eagle Summit Research Area were produced from black and white NASA aerial photographs. Infestations of the spruce beetle in the Cook Inlet, Alaska, were studied using aerial photographs.
Anderson, J. H.↗
Identification of phenological stages and vegetative types for land use classification
The author has identified the following significant results. Multispectral reflectance signatures have been obtained from computer printouts from scene 1049-20505. Those signatures have been grouped for 13 dominant physical features in the Matanuska Susitna Valley area of Alaska. The derived signatures will be validated and tested by requesting another symbol-coded computer printout for the same area. It is expected that ERTS-1 imagery collected during late autumn and early spring will provide separations of signatures that are confounded in the 1049-20505 scene. Separating bogs and forests should be much improved when either snow covered or when grasses are brown. Photographs have been made of projections on the color additive viewer, each scene being projected with six different filter combinations. The products will be analyzed and those best suited used for producing color transparencies at a scale of 1:250,000 for overlaying on standard quadrangle maps. Color prints will be processed for use in the field. From digital MSS signatures derived to date, identification has been made of which bands are the most powerful for automated classification of dominant physical features. It has been found that separations among density ranges increase with longer wavelengths. Deriving MSS digital signatures has proven valuable to both digital and visual processing of ERTS-1 data.
Branton, C. I.↗
Estimation and identification study for flexible vehicles
Techniques are studied for the estimation of rigid body and bending states and the identification of model parameters associated with the single-axis attitude dynamics of a flexible vehicle. This problem is highly nonlinear but completely observable provided sufficient attitude and attitude rate data is available and provided all system bending modes are excited in the observation interval. A sequential estimator tracks the system states in the presence of model parameter errors. A batch estimator identifies all model parameters with high accuracy.
Jazwinski, A. H.↗
Identification of winter wheat from ERTS-1 imagery
Continuing interpretation of the test area in Finney County, Kansas, has revealed that winter wheat can be successfully identified. This successful identification is based on human recognition of tonal signatures on MSS images. Several different but highly successful interpretation strategies have been employed. These strategies involve the use of both spectral and temporal inputs. Good results have been obtained from a single MSS-5 image acquired at a critical time in the crop cycle (planting). On a test sample of 54,612 acres, 89 percent of the acreage was correctly classified as wheat or non-wheat and the estimated wheat acreage (19,516 acres) was 99 percent of the actual acreage of wheat in the sample area.
Williams, D. L.↗
Identification of large masses of citrus fruit and rice fields in eastern Spain
ERTS-1 imagery has been successfully used for the identification of large areas of citrus groves and rice fields in the Valencia region of Eastern Spain. Results are encouraging and will facilitate the elaboration of a land use map with a fair degree of definition once methods prove to be fully operational.
Desagredo, F. L.↗
Identification, definition and mapping of terrestrial ecosystems in interior Alaska
The author has identified the following significant results. The primary objective is to identify and analyze vegetation types in as great of detail as possible on ERTS-1 imagery and to classify and delineate them through mapping. This is basic to the identification, definition, and mapping of ecosystems. Major conclusions are: (1) the ERTS-1 system is useful for regional scale studies of broadly defined Alaskan vegetation types; (2) the resolution and spectral capabilities of ERTS-1 MSS imagery in photographic formats is adequate for certain phytecenologic purposes; and (3) preparation of an improved State vegetation map will be feasible.
Anderson, J. H.↗
Remote sensing in Iowa agriculture: Identification and classification of Iowa crop lands using ERTS-1 and complimentary underflight imagery
The author has identified the following significant results. Results of the continuing analysis of ERTS-1 imagery covering Iowa during 1972 and periods during 1973 are covered. Emphasis is placed on the identification and classification of major crop types at two test sites in Iowa. Standard photointerpretive methods were used in this analysis including the direct enlargement of black and white single-band products and additive color multi-band procedures using a miniadcol system. The use of sequential coverage during the crop growing season is emphasized as a means to improve the effectiveness of ERTS-1 photointerpretations of crop land acreage estimates in Iowa. Illustrative black and white and color prints of both ERTS-1 and underflight imagery are included. In addition, forest land inventories at one test site are reported. A new method for the inventory of forest lands using ERTS-1 imagery is reported and compared with estimates obtained using earlier underflight imagery.
Mahlstede, J. P.↗
Identification of basic cloud types from ERTS imagery
The author has identified the following significant results. It was found that seven basic cloud types could be detected from ERTS-1 imagery. Each type exhibited characteristics that made them distinct. Suitable examples of each type were chosen, described, and a cloud identification item-index key prepared.
Morain, S. A.↗
Input frequency requirements for identification through Liapunov methods
A theorem is derived which specifies a sufficient number of input frequencies to guarantee identification of an unknown noise free linear plant. Since all of the referenced work relates to sufficient conditions for nulling of the parameter error vector, it is to be expected that various conditions on the system to be identified will have been imposed. It was found that some of these conditions appear to be necessary while others do not. The main contribution is to provide a theorem which considers the effect of unknown parameters in the state equation upon the frequency requirements.
Kim, C. H.↗
A multispectral cloud type identification method using Nimbus 3 MRIR measurements.
Using Nimbus 3 medium resolution infrared radiometer measurements, a multispectral cloud type identification method is developed. This method includes a fourth spectral region (20-23 microns), the use of radiative transfer theory, and a semiquantitative evaluation of satellite cloud type estimates with concurrent high resolution photography from aircraft flights.
Shenk, W. E.↗
Identification of rotating assembly inertial and bearing parameters.
The problem of estimating the state of a turbopump rotating assembly and identifying unknown products of inertia and unknown bearing parameters is considered. A linearized, extended Kalman filtering approach has been used and found to be successful for both state estimation and parameter identification in an inherently nonlinear problem. The input data were simulated Bently test data obtained from a verified 12-dimensional state-space model and were compared with real Bently test data obtained from NASA. The results prove the feasibility of using this model and this type of test data to obtain the hidden parameters of a typical turbopump rotating assembly.
Alspach, D. L.↗
System identification computational considerations.
System identification methods may be accurately characterized as inverse computational problems. Three approaches to the computational problem are considered. Equation error methods are based on regression analysis techniques. Attention is given to the maximum conditional likelihood estimate and the maximum unconditional likelihood (Bayesian) estimate. Gradient dependent algorithms for solving the minimization problems are discussed, taking into account Gaussian methods, quadratic model methods, and the homogeneous function model method of Jacobson and Oksman. Some advanced methods are also examined.
Bowles, R. L.↗
Identification of comet nucleus from comet coma.
The study of comets is of important scientific value as part of the exploration of the solar system. This paper proposes a method, called 'stationary target identification,' to detect the nucleus within the coma. The method makes use of the fact that the coma is ever expanding about the nucleus. Therefore, when a radar beam is used for detection, the coma particles will produce a return signal that is Doppler shifted. The effects of the spatial extent of the coma and Doppler bandwidth of the coma returns upon the required data processing are considered. Also different methods of implementation are considered.-
Brock, H. I.↗
Structural Aspects of System Identification
The problem of identifying linear dynamical systems is studied by considering structural and deterministic properties of linear systems that have an impact on stochastic identification algorithms. In particular considered is parametrization of linear systems so that there is a unique solution and all systems in appropriate class can be represented. It is assumed that a parametrization of system matrices has been established from a priori knowledge of the system, and the question is considered of when the unknown parameters of this system can be identified from input/output observations. It is assumed that the transfer function can be asymptotically identified, and the conditions are derived for the local, global and partial identifiability of the parametrization. Then it is shown that, with the right formulation, identifiability in the presence of feedback can be treated in the same way. Similarly the identifiability of parametrizations of systems driven by unobserved white noise is considered using the results from the theory of spectral factorization.
Glover, Keith↗
Identification of phenological stages and vegetative types for land use classification
The author has identified the following significant results. Recent signature identification and refinement techniques indicate that with automated classification of MSS CCT data commercial stands of cottonwood and white spruce can be identified with 80% accuracy in the Bonanza Creek experimental forest. Since that forest is representative of the vast interior Alaska forests, this finding has substantial economic importance to public and private forestry interests in Alaska.
Mckendrick, J. D.↗