Search NASA⌕ Search

SEARCH · Search NASA

Results for “Large Scale Simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Improved representation of agricultural land use and crop management for large-scale hydrological impact simulation in Africa using SWAT+

To date, most regional and global hydrological models either ignore the representation of cropland or consider crop cultivation in a simplistic way or in abstract terms without any management practices. Yet, the water balance of cultivated areas is strongly influenced by applied management practices (e.g. planting, irrigation, fertilization, and harvesting). The SWAT+ (Soil and Water Assessment Tool) model represents agricultural land by default in a generic way, where the start of the cropping season is driven by accumulated heat units. However, this approach does not work for tropical and subtropical regions such as sub-Saharan Africa, where crop growth dynamics are mainly controlled by rainfall rather than temperature. In this study, we present an approach on how to incorporate crop phenology using decision tables and global datasets of rainfed and irrigated croplands with the associated cropping calendar and fertilizer applications in a regional SWAT+ model for northeastern Africa. We evaluate the influence of the crop phenology representation on simulations of leaf area index (LAI) and evapotranspiration (ET) using LAI remote sensing data from Copernicus Global Land Service (CGLS) and WaPOR (Water Productivity through Open access of Remotely sensed derived data) ET data, respectively. Results show that a representation of crop phenology using global datasets leads to improved temporal patterns of LAI and ET simulations, especially for regions with a single cropping cycle. However, for regions with multiple cropping seasons, global phenology datasets need to be complemented with local data or remote sensing data to capture additional cropping seasons. In addition, the improvement of the cropping season also helps to improve soil erosion estimates, as the timing of crop cover controls erosion rates in the model. With more realistic growing seasons, soil erosion is largely reduced for most agricultural hydrologic response units (HRUs), which can be considered as a move towards substantial improvements over previous estimates. We conclude that regional and global hydrological models can benefit from improved representations of crop phenology and the associated management practices. Future work regarding the incorporation of multiple cropping seasons in global phenology data is needed to better represent cropping cycles in areas where they occur using regional to global hydrological models.

crop phenology↗

FACE-IT. A Science Gateway for Food Security Research

Progress in sustainability science is hindered by challenges in creating and managing complex data acquisition, processing, simulation, post-processing, and intercomparison pipelines. To address these challenges, we developed the Framework to Advance Climate, Economic, and Impact Investigations with Information Technology (FACE-IT) for crop and climate impact assessments. This integrated data processing and simulation framework enables data ingest from geospatial archives; data regridding, aggregation, and other processing prior to simulation; large-scale climate impact simulations with agricultural and other models, leveraging high-performance and cloud computing; and post-processing to produce aggregated yields and ensemble variables needed for statistics, for model intercomparison, and to connect biophysical models to global and regional economic models. FACE-IT leverages the capabilities of the Globus Galaxies platform to enable the capture of workflows and outputs in well-defined, reusable, and comparable forms. We describe FACE-IT and applications within the Agricultural Model Intercomparison and Improvement Project and the Center for Robust Decision-making on Climate and Energy Policy.

97 MATHEMATICS AND COMPUTING↗

Corrigendum and Addendum: Helium flux effects on bubble growth and surface morphology in plasma-facing tungsten from large-scale molecular dynamics simulations (2019 Nucl. Fusion 59 066035)

Two of the simulations discussed in a prior article (Hammond et al 2019 Nucl. Fusion 59 066035) were affected by a simulation glitch. We repeated the affected calculations and discuss them here. Here, the overall conclusions are essentially unchanged, though the details are different. In particular, observations that we referred to as ‘concerted bursting’ were caused primarily by non-physical heating and cooling applied by the thermostat after most atoms’ velocities were deleted (for reasons that are not known for certain). The phenomenon of one bubble bursting and causing another nearby bubble to burst does exist, though its effects are much less spectacular in the absence of non-physical driving forces. The observation of an interconnected network of sub-surface cavities formed by burst bubbles is real, and the observation of holes on the surface 1–2 nm in diameter is also confirmed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A Deep Learning Pipeline for Optimizing Large-scale Phase Field Simulations

Phase field (PF) simulations are computationally expensive but remain a key analysis tool to understand the complex mechanisms of additive manufacturing (AM) processes. Each PF simulation-aided analysis requires thousands of node hours on leadership-class supercomputers. One of the main goals of these analyses is the study of microstructure evolution during the build process which begins with the onset of nucleation. Nucleation occurs under certain thermomechanical conditions which are not known a priori and many PF simulations are required to identify ranges of input thermo-mechanical parameters that can result in the onset of nucleation. Since many of the simulations do not result in nucleation, an analysis campaign often ends up wasting tremendous amounts of precious computing resources executing nucleation-absent simulations. The goal of this work is to design and train deep learning models to inform a PF simulation about the likelihood of the occurrence of nucleation in a future simulation time-step based on the state summary over a finite number of past time-steps of a running simulation. If the prediction determines that the running simulation is unlikely to reach nucleation in the allotted time, then its execution is stopped immediately ultimately resulting in vast reduction in wasted computations when accrued over all the PF simulations typically performed in a single or multiple analysis campaign(s). The paper presents the performance of a machine learning pipeline that uses a convolutional neural network (CNN) model to learn an embedding which is then used with a self-attention network to build a multi-task deep learning model to predict the likelihood of nucleation. The model also predicts the input parameters used in a simulation. Performance is compared with a baseline pipeline that uses an off-the-shelf LeNet-5 model to learn the initial embedding. Despite their smaller size, performance results indicate significant improvement in accuracy of the proposed models compared to the larger baseline models.

Kannan, Ramakrishnan {ramki}↗

Optimal Execution of Co-analysis for Large-scale Molecular Dynamics Simulations

The analysis of scientific simulation data enables scientists to derive insights from their simulations. This analysis of the simulation output can be performed at the same execution site as the simulation using the same resources or can be done at a different site. The optimal output frequency is challenging to decide and is often chosen empirically. We propose a mathematical formulation for choosing the optimal frequency of data transfer for analysis and the feasibility of performing the analysis, under the given resource constraints such as network bandwidth, disk space, available memory, and computation time. We propose formulations for two cases of co-analysis -- local and remote. We consider various analyses features such as computation time, input data and memory requirement, importance of the analysis and minimum frequency required for performing the analysis. We demonstrate the effectiveness of our approach using molecular dynamics applications on the Mira and Edison supercomputers.

analysis↗

Modeling ramp compression experiments using large-scale molecular dynamics simulation.

Molecular dynamics simulation (MD) is an invaluable tool for studying problems sensitive to atomscale physics such as structural transitions, discontinuous interfaces, non-equilibrium dynamics, and elastic-plastic deformation. In order to apply this method to modeling of ramp-compression experiments, several challenges must be overcome: accuracy of interatomic potentials, length- and time-scales, and extraction of continuum quantities. We have completed a 3 year LDRD project with the goal of developing molecular dynamics simulation capabilities for modeling the response of materials to ramp compression. The techniques we have developed fall in to three categories (i) molecular dynamics methods (ii) interatomic potentials (iii) calculation of continuum variables. Highlights include the development of an accurate interatomic potential describing shock-melting of Beryllium, a scaling technique for modeling slow ramp compression experiments using fast ramp MD simulations, and a technique for extracting plastic strain from MD simulations. All of these methods have been implemented in Sandia's LAMMPS MD code, ensuring their widespread availability to dynamic materials research at Sandia and elsewhere.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Innovative Linear and Nonlinear Solvers for Simulating Multiphase Flow within Large-Scale Engineered Subsurface Systems

Numerical simulation of non-isothermal multiphase porous flow combined with reactive transport is used in a wide range of applications, which include nuclear waste repositories, enhanced recovery of petroleum reservoirs, contaminant remediation, geothermal engineering, and carbon sequestration. Understanding and predicting underground phenomena can have enormous impact on how to deal with world issues like climate change, clean water, and renewable energy. The main motivation for this proposal arises from safety assessment of future nuclear waste repositories using the U.S. Department of Energy (DOE) Geologic Disposal Safety Assessment (GDSA) Framework, and performance assessment (PA) for Waste Isolation Pilot Plant (WIPP), the nation's only active nuclear waste repository in Carlsbad, New Mexico. I am a technical staff member at Sandia National Laboratories involved in both projects.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Stochastic inflation lattice simulations - Ultra-large scale structure of the universe

Non-Gaussian fluctuations for structure formation may arise in inflation from the nonlinear interaction of long wavelength gravitational and scalar fields. Long wavelength fields have spatial gradients, a (exp -1), small compared to the Hubble radius, and they are described in terms of classical random fields that are fed by short wavelength quantum noise. Lattice Langevin calculations are given for a toy model with a scalar field interacting with an exponential potential where one can obtain exact analytic solutions of the Fokker-Planck equation. For single scalar field models that are consistent with current microwave background fluctuations, the fluctuations are Gaussian. However, for scales much larger than our observable Universe, one expects large metric fluctuations that are non-Gaussian. This example illuminates non-Gaussian models involving multiple scalar fields which are consistent with current microwave background limits.

Salopek, D. S.↗

Barotropic simulation of large-scale mixing in the Antarctic polar vortex

Theory and observations suggest that the Antarctic polar vortex is relatively isolated from midlatitudes, although others have interpreted the observations to indicate that there is substantial mixing from the interior of the vortex into middle latitudes. The equivalent barotropic model of Salby et al. is used to study quasi-horizontal mixing by the large-scale flow in the lower stratosphere during Southern Hemisphere spring, which is when the Antarctic ozone hole appears and disappears. The model is forced by relaxation to observed climatological monthly mean zonal-mean winds and by an idealized wave 1 or 2 forcing at the lower boundary. Mixing and transport are diagnosed primarily through Lagrangian tracer trajectories. For September, October, and November basic states, there is little or no mixing in the interior of the vortex. Mixing occurs near the critical lines for the waves: in the tropics and subtropics for a stationary wave 1, and in midlatitudes on the equatorial flank of the jet for an eastward-moving wave 2. For the December basic state, the wave 2 forcing rapidly mixes the interior of the vortex. Mixing of Lagrangian tracer particles can be significant even when the waves do not `break', as evidenced by the potential vorticity field. In the model there does not appear to be any significant transport of air out of the interior of the polar vortex prior to the vortex breakdown. The principal factor that leads to the vortex breakdown and mixing of the vortex interior is the deceleration of the jet to the point where winds in the interior of the vortex are close to the phase velocity of the wavenumber 2 forcing. The tracer transport is very similar to many aspects of the behavior of the total ozone field during the spring season.

Bowman, Kenneth P.↗

Ordering Unstructured Meshes for Sparse Matrix Computations on Leading Parallel Systems

The ability of computers to solve hitherto intractable problems and simulate complex processes using mathematical models makes them an indispensable part of modern science and engineering. Computer simulations of large-scale realistic applications usually require solving a set of non-linear partial differential equations (PDES) over a finite region. For example, one thrust area in the DOE Grand Challenge projects is to design future accelerators such as the SpaHation Neutron Source (SNS). Our colleagues at SLAC need to model complex RFQ cavities with large aspect ratios. Unstructured grids are currently used to resolve the small features in a large computational domain; dynamic mesh adaptation will be added in the future for additional efficiency. The PDEs for electromagnetics are discretized by the FEM method, which leads to a generalized eigenvalue problem Kx = AMx, where K and M are the stiffness and mass matrices, and are very sparse. In a typical cavity model, the number of degrees of freedom is about one million. For such large eigenproblems, direct solution techniques quickly reach the memory limits. Instead, the most widely-used methods are Krylov subspace methods, such as Lanczos or Jacobi-Davidson. In all the Krylov-based algorithms, sparse matrix-vector multiplication (SPMV) must be performed repeatedly. Therefore, the efficiency of SPMV usually determines the eigensolver speed. SPMV is also one of the most heavily used kernels in large-scale numerical simulations.

Oliker, Leonid↗