Search NASA⌕ Search

SEARCH · Search NASA

Results for “Lattice Structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Mapping charge excitations in generalized Wigner crystals

Transition metal dichalcogenide-based moiré superlattices exhibit strong electron-electron correlations, thus giving rise to strongly correlated quantum phenomena such as generalized Wigner crystal states. Evidence of Wigner crystals in transition metal dichalcogenide moire superlattices has been widely reported from various optical spectroscopy and electrical conductivity measurements, while their microscopic nature has been limited to the basic lattice structure. Theoretical studies predict that unusual quasiparticle excitations across the correlated gap between upper and lower Hubbard bands can arise due to long-range Coulomb interactions in generalized Wigner crystal states. However, the microscopic proof of such quasiparticle excitations is challenging because of the low excitation energy of the Wigner crystal. Here, in this study, we describe a scanning single-electron charging spectroscopy technique with nanometre spatial resolution and single-electron charge resolution that enables us to directly image electron and hole wavefunctions and to determine the thermodynamic gap of generalized Wigner crystal states in twisted WS 2 moiré heterostructures. High-resolution scanning single-electron charging spectroscopy combines scanning tunnelling microscopy with a monolayer graphene sensing layer, thus enabling the generation of individual electron and hole quasiparticles in generalized Wigner crystals. We show that electron and hole quasiparticles have complementary wavefunction distributions and that thermodynamic gaps of ~50 meV exist for the 1/3 and 2/3 generalized Wigner crystal states in twisted WS 2 .

36 MATERIALS SCIENCE↗

Direct observation of two-dimensional magnons in atomically thin CrI 3

Magnons are collective spin excitations in crystals with long-range magnetic order. The emergent van der Waals magnets provide a highly tunable platform to explore magnetic excitations in the two-dimensional limit with intriguing properties, manifesting from their honeycomb lattice structure and switchable magnetic configurations. Here, we report the direct observation of two-dimensional magnons through magneto-Raman spectroscopy with optical selection rules determined by the interplay between crystal symmetry, layer number and magnetic states in atomically thin CrI 3 . In monolayers, we observe an acoustic magnon mode at ~0.3 meV. It has strict cross-circularly polarized selection rules locked to the magnetization direction that originates from the conservation of angular momentum of photons and magnons dictated by three-fold rotational symmetry. Additionally, we reveal optical magnon modes at ~17 meV. This mode is Raman silent in monolayers, but optically active in bilayers and bulk due to a relaxation of the parity criterion resulting from the layer index. In the layered antiferromagnetic states, we directly resolve two degenerate optical magnon modes with opposite angular momentum and conjugate optical selection rules. From these measurements, we quantitatively extract the spin-wave gap, magnetic anisotropy and intralayer and interlayer exchange constants, and establish two-dimensional magnets as a new platform for exploring magnon physics.

36 MATERIALS SCIENCE↗

Microscopic signatures of topology in twisted MoTe 2

In moiré materials with flat electronic bands and suitable quantum geometry, strong correlations can give rise to various topological states of matter. The non-trivial band topology of twisted MoTe 2 , which is responsible for its fractional quantum anomalous Hall states, is predicted to arise from a skyrmion lattice texture in the layer pseudospin of the electronic wavefunctions. Tracing the layer polarization of wavefunctions within the moiré unit cell can, thus, offer insights into the band topology. Here we measure the out-of-plane component of the layer-pseudospin skyrmion textures of twisted MoTe 2 using scanning tunnelling microscopy and spectroscopy. We do this by simultaneously visualizing the moiré lattice structure and the spatial localization of its electronic states. We find that the wavefunctions associated with the topological flat bands exhibit a spatially dependent layer polarization within the moiré unit cell, in agreement with our theoretical modelling. Furthermore, our work enables future local probe studies of the intertwined correlated and topological states arising in gate-tunable devices.

Electronic properties and materials↗

Electrostatic gating and intercalation in 2D materials

The doping or the alteration of crystals with guest species to obtain desired properties has long been a research frontier in materials science. However, the closely packed lattice structure in many crystals has limited the applicability of this strategy. The advent of 2D layered materials has led to revitalized interest in utilizing this approach through two important strategies, gating and intercalation, offering reversible modulation of the properties of the host material without breaking chemical bonds. In addition, these dynamically tunable techniques have enabled the synthesis of new hybrid materials. Here, we review how interactions between guest species and host 2D materials can tune the physics and chemistry of materials and discuss their remarkable potential for creating artificial materials and architectures beyond the reach of conventional methods.

36 MATERIALS SCIENCE↗

Photoinduced twist and untwist of moiré superlattices

This paper directly observes femtosecond photoinduced twist–untwist motion of WSe₂/MoSe₂ moiré superlattices using ultrafast electron diffraction, showing that optical excitation can dynamically reconfigure moiré lattice structure and interlayer coupling. It supports the proposal by establishing the team’s ability to probe ultrafast interfacial and moiré dynamics, which is relevant to using moiré TMDs as reconfigurable platforms for controlling spin, charge, and molecular interactions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Element Effects on High-Entropy Alloy Vacancy and Heterogeneous Lattice Distortion Subjected to Quasi-equilibrium Heating

We applied Simmons–Balluffi methods, positron measurements, and neutron diffraction to estimate the vacancy of CoCrFeNi and CoCrFeMnNi high-entropy alloys (HEAs) using Cu as a benchmark. The corresponding formation enthalpies and associated entropies of the HEAs and Cu were calculated. The vacancy-dependent effective free volumes in both CoCrFeNi and CoCrFeMnNi alloys are greater than those in Cu, implying the easier formation of vacancies by lattice structure relaxation of HEAs at elevated temperatures. Spatially resolved synchrotron X-ray measurements revealed different characteristics of CoCrFeNi and CoCrFeMnNi HEAs subjected to quasi-equilibrium conditions at high temperatures. Element-dependent behavior revealed by X-ray fluorescence (XRF) mapping indicates the effect of Mn on the Cantor Alloy.

36 MATERIALS SCIENCE↗

Graphene nanoribbons for quantum electronics

Graphene nanoribbons (GNRs) are a family of one-dimensional (1D) materials with a graphitic lattice structure. GNRs possess high mobility and current-carrying capability, sizeable bandgap and versatile electronic properties, which make them promising candidates for quantum electronic applications. In the past 5 years, progress has been made towards atomically precise bottom-up synthesis of GNRs and heterojunctions that provide an ideal platform for functional molecular devices, as well as successful production of semiconducting GNR arrays on insulating substrates potentially useful for large-scale digital circuits. With further development, GNRs can be envisioned as a competitive candidate material in future quantum information sciences. In this Perspective, we discuss recent progress in GNR research and identify key challenges and new directions likely to develop in the near future.

36 MATERIALS SCIENCE↗

The Effect Of Electronic Energy Loss On Irradiation-induced Grain Growth In Nanocrystalline Oxides

Grain growth of nanocrystalline materials is generally thermally activated, but can also be driven by irradiation at much lower temperature. In nanocrystalline ceria and zirconia, energetic ions deposit their energy to both atomic nuclei and electrons. Our experimental results have shown that irradiationinduced grain growth is dependent on the total energy deposited, where electronic energy loss and elastic collisions between atomic nuclei both contribute to the production of disorder and grain growth. Our atomistic simulations reveal that a high density of disorder near grain boundaries leads to locally rapid grain movement. The additive effect from both electronic excitation and atomic collision cascades on grain growth demonstrated in this work opens up new possibilities for controlling grain sizes to improve functionality of nanocrystalline materials.

Environmental Molecular Sciences Laboratory↗

Thermodynamics of technetium: Reconciling theory and experiment using density functional perturbation analysis

The structure, lattice dynamics and thermodynamic properties of bulk technetium were investigated within the framework of density functional theory. The phonon density of states spectrum computed with density functional perturbation theory closely matches inelastic coherent neutron scattering measurements. The thermal properties of technetium were derived from phonon frequencies calculated within the quasi-harmonic approximation (QHA), which introduces a volume dependence of phonon frequencies as a part of the anharmonic effect. As a result, the predicted thermal expansion and isobaric heat capacity of technetium are in excellent agreement with available experimental data for temperatures up to ~1600 K.

36 MATERIALS SCIENCE↗

Abiotic Reductive Removal and Subsequent Incorporation of Tc(IV) into Iron Oxides: A Review

The comparative review of the selected range of studies describing abiotic Tc(VII) reduction with iron oxides and oxyhydroxides, such as magnetite, hematite, goethite, and ferrihydrite, revealed co-existence of several processes upon reduction of pertechnetate anion (Tc(VII)O4-) that can be detected simultaneously: polymerization of Tc(IV) into chains of Tc(IV) oxide that might create clusters and precipitate on the surface of iron mineral as TcO2 mono or dimer complexes; surface sorption of Tc—Tc dimers; and incorporation of Tc(IV) into lattice structure of iron oxides, i.e. predominantly magnetite. The mechanism for mononuclear incorporation of Tc(IV) into magnetite is discussed, and it is demonstrated that Tc(IV) substitution of Fe(II) with consequent loss of Fe(II) for the charge mismatch is more evident, despite commonly accepted assumption of Tc(IV) for Fe(III) substitution due to similarity in atomic radii. Oxidation of Fe(II) and creation of cavity during Fe(II) loss is described by the natural process of maghematization (transfer of magnetite to its fully oxidized state, maghemite), and Tc(IV) incorporation during this process is more energetically favorable, as it was supported before through computational studies. Clarification of the Tc local environment in iron minerals via EXAFS data analysis does not produce a definitive answer, as the local environment in different iron oxides and hydroxides is very similar and may not be taken alone for the conclusive statements.

Boglaienko, Daria↗

Dimensional interpolation for metallic hydrogen

In this work, we employ a simple and mostly accurate dimensional interpolation formula using dimensional limits D = 1 and D = ∞ to obtain D = 3 ground-state energy of metallic hydrogen. We also present results describing the phase transitions for different symmetries of three-dimensional structure lattices. The interpolation formula not only predicts fairly accurate energies but also predicts a correct functional form of the energy as a function of the lattice parameters. That allows us to calculate different physical quantities such as the bulk modulus, Debye temperature, and critical transition temperature, from the gradient and the curvature of the energy curve as a function of the lattice parameters. These theoretical calculations suggest that metallic hydrogen is a likely candidate for high temperature superconductivity. The dimensional interpolation formula is robust and might be useful to obtain the energies of complex many-body systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pressure and temperature dependences of the canting angle and increase in the magnetic ordering temperature, T c ( P ), for the weak ferromagnet Li + [TCNE]˙ – (TCNE = tetracyanoethylene)

The hydrostatic pressure dependence of the magnetic ordering temperature, T c (P), for the interpenetrating, diamondoid lattice-structured, weak ferromagnet (= canted antiferromagnet) Li + [TCNE]˙ – (TCNE = tetracyanoethylene) reversibly increases from 20.9 to 23.4 K at 9.73 kbar, an increase of 12% with a rate of increase, dT c /dP, of 0.27 K kbar –1 . The 5 T magnetization increased by 672% from 186 emu Oe mol –1 at ambient pressure to an average of 1440 emuOe mol –1 upon application of pressure. The remanent magnetization initially increases 30% from 10.8 to 14.0 emuOe mol –1 from ambient to 0.06 kbar, and increases further by 6% to a maximum of 14.8 emuOe mol –1 at 0.56 kbar before declining by 22% to 11.5 emuOe mol –1 at 9.73 kbar. The pressure-dependent coercive field, H cr (P), initially decreases by 42% from 31.1 Oe at ambient pressure to 18 Oe at 0.06 kbar, then increases to 52 Oe at 9.73 kbar. The canting angle, α, increases by 28% from 0.52° to 0.66° at 0.06 kbar, then decreases by 23% to 0.51° at 9.73 kbar, as well as increases by 2% from 0.536° to 0.548° from 1.8 to 2.5 K, before decreasing by 79% to 0.117° at 19 K. The interlattice interactions are attributed to be the primary exchange mechanism. Furthermore, α(T) and α(P) have similar dependencies that are attributed to a competition between an increase and a decrease in the intra- and interlayer C … N interlattice separations as the temperature and pressure increases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

MeV Proton Irradiation Effects on Fullerenes and Graphite

Ion irradiation of graphite and other carbon allotropes is a versatile tool for manipulating their physical, chemical and even magnetic properties. Fullerene films, when irradiated with 2 MeV protons, display soft-ferromagnetic ordering at 5 K. At 300 K both pristine and irradiated films show diamagnetic behaviour.Magnetisation data in the temperature range of 2-300 K, in 1 T applied field, for the irradiated film show much stronger temperature dependence compared to a pristine film. The ion irradiation study has been further extended to the graphite system. Poly-crystalline graphite samples were irradiated with 2.25MeV protons at a fluence of 2x10{sup 17} ions/cm2.Magnetic ordering in highly oriented pyrolytic graphite samples have been reported earlier under similar irradiation conditions [Esquinazi et. al. Phys. Rev. Lett. 91 (2003) 227201]. In that study, the authors attribute the observed irradiation induced magnetic ordering to the formation of a mixed sp{sup 2}-sp{sup 3} hybridized carbon atoms. Here we present Raman and X-ray photoelectron spectroscopic studies on pristine and irradiated graphite samples. Irradiated samples are found to show an increased number of sp3 hybridized carbon atoms. However, the Raman spectrum, specially the second order data, do indicate that the nature of the graphene lattice structure has been preserved in the irradiated samples. The formation of a mixed sp{sup 2}-sp{sup 3} hybridization in graphite structure, which might be responsible for magnetism,will be discussed.

36 MATERIALS SCIENCE↗

Applying uniform reversible strain to epitaxial oxide films

We demonstrate using four-circle x-ray diffraction that the piezoelectric substrate of Pb(Mg{sub 1/3}Nb{sub 2/3}){sub 0.72}Ti{sub 0.28}O{sub 3}(001) induces uniform reversible in-plane strain to epitaxially-grown oxide films and bilayers. The biaxial in-plane strain depends linearly on the applied electrical voltage. Utilizing the reversible strain, the strain-dependent lattice structure and the Poisson number characterizing the elastic response is determined for 200 nm thick SrTiO{sub 3}, LaScO{sub 3}, and BiFeO{sub 3} films. The uniformity and reversibility of the strain provides access to the direct quantitative measurement of strain-dependent properties of epitaxial oxide films.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Status of the Metrology Light Source

The Physikalisch-Technische Bundesanstalt (PTB), the German national metrology institute, has set up the low-energy electron storage ring Metrology Light Source (MLS) in close cooperation with the Helmholtz-Zentrum Berlin (HZB, formerly BESSY). This new storage ring has been in regular user operation since April 2008 and is dedicated to synchrotron-radiation-based metrology and technological developments in the far-IR/THz, IR, UV, VUV and EUV spectral range. The MLS has a double-bend-achromate lattice structure, injection is from a 105 MeV racetrack microtron. The electron energy can be ramped to any value from 105 MeV up to 630 MeV and the electron beam current covers the range from one stored electron (1 pA) up to 200 mA. The MLS is the first electron storage ring optimized for the generation of coherent synchrotron radiation, based on an electron bunch shortening mode. In this mode, MLS delivers coherent radiation in the far-IR/THz spectral range with enhanced intensity as compared to the normal mode of operation. Several beamlines are in operation or in construction, including one undulator beamline, bending magnet beamlines for the calibration of radiation sources and detectors and for reflectometry, an EUV metrology beamline and three IR/THz beamlines.

43 PARTICLE ACCELERATORS↗

Cryo-technical design aspects of the superconducting SIS100 quadrupole doublet modules

The FAIR project was initiated to build an international accelerator and experimental facility for basic research activities in various fields of modern physics. The core component of the project will be the SIS100 heavy ion accelerator, producing heavy ion beams of uniquely high intensities and qualities. The superconducting main quadrupoles and corrector magnets are assembled within complex quadrupole doublet modules (QDMs), combining two superconducting quadrupole (focusing and defocusing), sextupole and steering magnets in one cryostat. In addition a cryo-catcher, a beam position monitor and a cold beam pipe will be integrated. In accordance with the magnet lattice structure, the QDM series for the SIS100 consists of four main families composed of eleven different configurations. The common technical feature of all configurations is a sophisticated common girder structure, mechanically integrating all functional components in one cold mass and being suspended in a corresponding cryostat system. The requirements to position preservation during thermal cycling are to be fulfilled by a precise and stable support of the functional elements, as well as by a reliable, reproducible and stable cold mass suspension system. The main design aspects of the QDMs will be discussed as a result of these requirements.

43 PARTICLE ACCELERATORS↗

Stability of multiferroicity against Dy/Mn off-stoichiometry in DyMnO{sub 3}

We investigate the effects of slight Dy/Mn off-stoichiometry on the multiferroic behaviors of DyMnO{sub 3} (Dy{sub 1−x}Mn{sub 1+x}O{sub 3}). It is revealed that the distorted lattice structure and ferroelectric property exhibit higher stability against the Mn deficiency than the Dy deficiency. Since the electric polarization includes the contributions from the Mn-Mn and Dy-Mn interactions, the measured polarization exhibits different dependence on the Mn deficiency from that on the Dy deficiency. The present work suggests that the Dy/Mn off-stoichiometry is detrimental to the ferroelectricity, owing to the modulated spin interactions and reshuffled spin frustration.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strain engineering of Dirac cones in graphyne

6,6,12-graphyne, one of the two-dimensional carbon allotropes with the rectangular lattice structure, has two kinds of non-equivalent anisotropic Dirac cones in the first Brillouin zone. We show that Dirac cones can be tuned independently by the uniaxial compressive strain applied to graphyne, which induces n-type and p-type self-doping effect, by shifting the energy of the Dirac cones in the opposite directions. On the other hand, application of the tensile strain results into a transition from gapless to finite gap system for the monolayer. For the AB-stacked bilayer, the results predict tunability of Dirac-cones by in-plane strains as well as the strain applied perpendicular to the plane. The group velocities of the Dirac cones show enhancement in the resistance anisotropy for bilayer relative to the case of monolayer. Such tunable and direction-dependent electronic properties predicted for 6,6,12-graphyne make it to be competitive for the next-generation electronic devices at nanoscale.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗