Search NASA⌕ Search

SEARCH · Search NASA

Results for “Level Up”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Demonstrations of System-Level Autonomy for Spacecraft

System-level autonomy refers to autonomously meeting the crosscutting needs of a system through awareness and coordinated control spanning the system's breadth of capabilities. In contrast to function-level autonomy, which focuses on capabilities required to achieve a specific function such as surface navigation or image recognition, system-level autonomy addresses the needs to coordinate and manage activities and resources, and estimate the state, across subsystems. This paper describes demonstrations that were conducted on a spacecraft workstation testbed. The autonomy was provided by system-level planning and execution integrated with system-level estimators of orbit knowledge and spacecraft hardware health. These components are embedded in a system-level framework defining how goals are formed and executed, which elements exist, and how control authority is distributed among components. The planning and execution system at the heart of the framework has the capability to schedule, execute and monitor completion of tasks, as well as plan around unexpected events including new science opportunities and anomalies. The planning and scheduling system is the Multi-mission EXECutive (MEXEC), supported by the system-level health state estimator Model-Based Off-Nominal State Identification and Detection (MONSID), and Autonomous Navigation (AutoNav) algorithms, which determine the orbital system state based on optical observation of other targets. These components are applicable to many kinds of missions on different platforms. These demonstrations were elaborations of earlier experiments conducted on the ASTERIA (Arcsecond Space Telescope Enabling Research In Astrophysics) CubeSat, described in a companion submission [1]. The spacecraft’s extended mission served as an in-flight test platform, during which some individual autonomous capabilities were flown successfully. The autonomy experiments described here were performed on the ASTERIA workstation testbed.

Prather, Maurice↗

SAGE III/ISS v5.3 Level 2 Data Product Changes and Improvements

The Stratospheric Aerosol and Gas Experiment on the International Space Station (SAGE III/ISS) is an occultation instrument that acquires measurements of aerosols and gases within the Earth’s stratosphere and upper troposphere. SAGE III/ISS provides level 2 solar species products for aerosol extinction (9 channels), nitrogen dioxide (NO2), ozone (O3), and water vapor (H2O). The level 2 products currently provide three O3 profiles based on differing retrievals. The first O3 profile is based on measurements at short wavelengths within the Hartley-Huggins band (MesO3), the second O3 profile is based on measurements made at visible wavelengths within the Chappius band (MLR O3), and the final profile is found using a more SAGE II like approach (AO3). The SAGE III/ISS also provides level 2 lunar species products for ozone (O3), nitrogen dioxide (NO2), and nitrogen trioxide (NO3). Version 5.3 of the SAGE III/ISS retrieval algorithm introduces improvements that affect the level 2 data products. The largest change to the solar algorithm is the implementation of disturbance monitoring package (DMP) corrections to improve pointing accuracy. The DMP is comprised of a miniature inertial measurement unit that measures rotation in inertial space using ring laser gyroscopes oriented about three orthogonal axes which can be used to correct pointing errors caused by mechanical disturbances. A major change common to solar and lunar algorithms is meteorological input from the coarser 42 level Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2) model data to the 72 level MERRA-2 model data. The final major change involves improving the automated quality assurance (QA) algorithm to recover events that were withheld from the public release because differences between the AO3 and MLR O3 for some events after the eruption of Tonga–Hunga Haʻapai. Other changes for v5.3 include minor bug fixes as well as restoration of some data quality flags that were removed in v5.21. This presentation presents the impacts of these changes as well as overall observations of interest from v5.3 level 2 data products.

Carter Hulsey↗

SAGE III/ISS v5.3 Level 2 Data Product Changes and Improvements

The Stratospheric Aerosol and Gas Experiment on the International Space Station (SAGE III/ISS) is an occultation instrument that acquires measurements of aerosols and gases within the Earth’s stratosphere and upper troposphere. SAGE III/ISS provides level 2 solar species products for aerosol extinction (9 channels), nitrogen dioxide (NO2), ozone (O3), and water vapor (H2O). The level 2 products currently provide three O3 profiles based on differing retrievals. The first O3 profile is based on measurements at short wavelengths within the Hartley-Huggins band (MesO3), the second O3 profile is based on measurements made at visible wavelengths within the Chappius band (MLR O3), and the final profile is found using a more SAGE II like approach (AO3). The SAGE III/ISS also provides level 2 lunar species products for ozone (O3), nitrogen dioxide (NO2), and nitrogen trioxide (NO3). Version 5.3 of the SAGE III/ISS retrieval algorithm introduces improvements that affect the level 2 data products. The largest change to the solar algorithm is the implementation of disturbance monitoring package (DMP) corrections to improve pointing accuracy. The DMP is comprised of a miniature inertial measurement unit that measures rotation in inertial space using ring laser gyroscopes oriented about three orthogonal axes which can be used to correct pointing errors caused by mechanical disturbances. A major change common to solar and lunar algorithms is meteorological input from the coarser 42 level Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2) model data to the 72 level MERRA-2 model data. The final major change involves improving the automated quality assurance (QA) algorithm to recover events that were withheld from the public release because differences between the AO3 and MLR O3 for some events after the eruption of Tonga–Hunga Haʻapai. Other changes for v5.3 include minor bug fixes as well as restoration of some data quality flags that were removed in v5.21. This presentation presents the impacts of these changes as well as overall observations of interest from v5.3 level 2 data products.

Carter Hulsey↗

Selective Determination of Methylmercury Levels in Mercury-Contaminated Topsoils from Oak Ridge, TN - 18163

Mercury (Hg) is a strong neurotoxin that affects the central and peripheral nervous system. Mercury has several organomercury species that bio-accumulate in many different environments. In early 1950's, elemental mercury was used for manufacturing of various components nuclear weapons systems in the Y-12 Security Complex in Oak Ridge, TN. The mercury released to the environment contaminated the facilities, soil, sediment, surface water, and groundwater within the boundaries of the Y-12 Plant and the downstream environment along the East Fork Poplar Creek. Remediation efforts have been made since then to alleviate the amount of mercury contamination that impacts the soil, water and wildlife at the Y-12 complex and surrounding areas. Yet, mercury levels in the water still exceed both the regulatory limits (51 ng/L) and the remediation goal (200 μg/L). Methylmercury (CH{sub 3}Hg) is the most toxic form of mercury that bio-accumulates exponentially compared to other forms of mercury. It is hypothesized that contaminated soils contain significant levels of methylmercury that contributes to contamination in nearby freshwater ecosystems in Y-12 complex. The objective of this study was to develop analytical method for selective determination of CH{sub 3}Hg from mercury-contaminated soils that contained elevated levels of inorganic mercury, Hg(II). Attempts were made to selectively extract CH{sub 3}Hg from spiked template soils via extraction in dilute hydrochloric (HCl) and nitric acids (HNO{sub 3}). The latter performed better than HCl affording quantitative extraction of CH{sub 3}Hg with minimal extraction of Hg(II). Under same circumstance, only about 5% of Hg(II) extracted from the soil matrix. Coprecipitation efforts were made using Bi(III), Fe(III) and La(III) alone and in conjunction with thiourea and L-cysteine. A combination of La(III) + L-cysteine afforded highest elimination of Hg(II) from solutions. Thiourea was not suitable for coprecipitation of Hg(II) as it also precipitated up to 67% of CH{sub 3}Hg from simulated soil solutions. Cold vapor generation (CVG) interfaced to ICP-MS was optimized for selective determination of CH{sub 3}Hg{sup +}. Calibration curves were established with CH{sub 3}Hg standards in La(III) and 0.1% L-cysteine and 5% (v/v) HNO{sub 3} by CVG-ICP-MS. The method was validated by determination of CH{sub 3}Hg in sediment reference material (SQC1238) and Estuarine sediment (ERM - CC580) containing trace levels of CH{sub 3}Hg in Hg(II) matrix. The procedure was applied to floodplain soils from Oak Ridge, TN. Methylmercury levels were in the range of 0.031 to 0.047 μg/g. The results indicated that CH{sub 3}Hg{sup +} levels were substantially lower inorganic Hg(II), still though CH{sub 3}Hg at these levels could be significant source of persistent mercury contamination in freshwater systems. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Use of Micro-Gravity Sensors for External Fluid Level Monitoring in Waste and Nuclear Related Applications - 20315

There are a number of applications in nuclear energy and hazardous waste disposal that require monitoring of fluids under extreme environments, including high levels of temperature, pressure, toxicity and radioactivity. Many of these applications will benefit from a monitoring technique that is external and non-invasive. Currently the sensors used are invasive, must reside inside the pressurized vessels and must penetrate the vessel walls, which can create a weakness in the vessel. Additionally, instruments that are used inside such containers must be exceptionally hardened to the environment. Information Systems Laboratories (ISL) has developed an external mass (gravimetric) measuring technique for monitoring nuclear coolant in Small Modular Reactors (SMRs), which will also work for measuring fluid levels in waste tanks, that avoids the problems inherent in invasive sensors. It utilizes a COTS gravitational sensor of unprecedented accuracy, leveraged via proper sensor placement geometry, to detect fluid changes of small amplitude from an outside position, obviating the need to penetrate the vessel. The technique is called Gravisense{sup TM}. ISL has proven via simulation and experiment that this concept can be usefully applied to monitoring fluid levels in both nuclear reactors and large waste tanks. Numerical simulation algorithms were developed to calculate the gravity effect of small changes in water level, which were verified by experiments at the NIST Physical Simulator facility at the Oregon State University. The measured ultralow noise levels of the superconducting gravimeter type which utilizes a Niobium sphere suspended in a magnetic field to attain its phenomenal accuracy, demonstrated that fluid levels in SMRs can be measured at least to within 3 cm. Furthermore, the method can distinguish between a contained leak (from reactor to containment vessel) from an external leak (from reactor to outside of containment). Additionally, simulations of waste canisters that hold spent fuel rods show that the fluid level measuring accuracy can potentially do better than 1 cm accuracy by measuring from below the vessel, and judicious placement of sensors on top of large waste tanks can potentially achieve a very impressive 2 mm measurement accuracy. These encouraging results prove that the Gravisense{sup TM} technique for fluid determination can be very useful in nuclear energy generation, testing, and research, as well as in waste monitoring situations that are difficult to monitor via traditional sensing technology. We believe that the next step should be to test the technique on canisters of the type that are currently storing waste in various DOE locations. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Competing decay-channel fluorescence, dissociation, and ionization in superexcited levels of H{sub 2}

The absolute cross sections for the competing decay-channel fluorescence, dissociation, and ionization of photoexcited long-lived superexcited H{sub 2} molecular levels have been measured from the ionization threshold of H{sub 2} up to the H(1s) + H(n=3) dissociation limit. The total and partial natural widths of these levels have been determined. Good agreement is found with first principles calculations carried out with the multichannel quantum defect theory for excited levels of {sup 1{Pi}}{sub u}{sup -} symmetry, which represent 70% of the levels studied experimentally. The calculations reproduce the balance between the competing decay processes as well as its substantial evolution from level to level.

74 ATOMIC AND MOLECULAR PHYSICS↗

Coherently prepared nondegenerate Y-shaped four-level correlated emission laser: A source of tripartite entangled light

A detailed derivation of the master equation of the cavity radiation of a coherently prepared Y-shaped four-level correlated emission laser is presented. The outline of the procedures that can be employed in analytically solving the stochastic differential equations and the rate equations of various correlations are also provided. It is shown that coherently preparing the atoms in the upper two energy levels and the lower level initially can lead to a genuine continuous-variable tripartite entanglement. Moreover, preparing the atoms in the coherent superposition, other than the possible maximum or minimum, of the upper two energy levels, leaving the lower level unpopulated, may lead to a similar observation. With the possibility of the atom at the intermediate energy level to take three different transition roots guided by the induced coherence, this system, in general, is found to encompass versatile options for practical utilization. In particular, coupling at least one of the dipole forbidden transitions by an external radiation is expected to enhance the degree of detectable entanglement.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Properties of Fr-like Th{sup 3+} from spectroscopy of high-L Rydberg levels of Th{sup 2+}

Binding energies of high-L Rydberg states (L{>=} 7) of Th{sup 2+} with n = 27-29 were studied using the resonant excitation Stark ionization spectroscopy (RESIS) method. The core of the Th{sup 2+} Rydberg ion is the Fr-like ion Th{sup 3+} whose ground state is a 5 {sup 2}F{sub 5/2} level. The large-core angular momentum results in a complex Rydberg fine-structure pattern consisting of six levels for each value of L that is only partially resolved in the RESIS excitation spectrum. The pattern is further complicated, especially for the relatively-low-L levels, by strong nonadiabatic effects due to the low-lying 6d levels. Analysis of the observed RESIS spectra leads to determination of five properties of the Th{sup 3+} ion: its electric quadrupole moment Q = 0.54(4); its adiabatic scalar and tensor dipole polarizabilities {alpha}{sub d,0} = 15.42(17) and {alpha}{sub d,2} = -3.6(1.3); and the dipole matrix elements connecting the ground 5 {sup 2}F{sub 5/2} level to the low-lying 6 {sup 2}D{sub 3/2} and 6 {sup 2}D{sub 5/2} levels, |<5 {sup 2}F{sub 5/2}||D||6{sup 2}D{sub 3/2}>|=1.435(10) and |<5{sup 2}F{sub 5/2}||D||6{sup 2}D{sub 5/2}>|=0.414(24). All are in atomic units. These are compared with theoretical calculations.

74 ATOMIC AND MOLECULAR PHYSICS↗

Multi-Level Kondo Effect and Enhanced Critical Temperature in Nanoscale Granular Al

The normal state conductance of high resistivity granular Al films, having an enhanced critical temperature above 3 K, shows a non-monotonous temperature dependence. Upon cooling the conductance first increases, reaches a broad maximum, then decreases, and finally increases sharply again at low temperatures. This behavior bears a striking resemblance to that predicted for the conductance of quantum dots in a regime where the broadening of discrete energy levels, due to coupling of the dot to the leads reservoirs, is larger than the level separation. In this regime, a multi-level Kondo temperature can be larger than the effective Coulomb charging energy, leading to a metallic-like behavior at high temperatures. This is followed by a Coulomb dominated regime, while at yet lower temperatures, the single level Kondo behavior can be recovered. We believe that this multi-level Kondo resonance model for single dots may apply to our 3D network of nanoscale grains. The multi-level resonance prevents the insulating state from setting-in already at high temperatures, which is favorable for superconductivity. This interpretation of the experimental conductance data is in line with the previously reported presence of magnetic moments in these films. High-resolution electron microscopy shows that intergrain coupling can take place through atomic size Sharvin contacts, which is consistent with the typical values of the intergrain resistance of the films as the metal to insulator transition is approached.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Emergence of shallow energy levels in B-doped Q-carbon: A high-temperature superconductor

We report the spectroscopic demonstration of the shallow-level energy states in the recently discovered B-doped Q-carbon Bardeen-Cooper-Schrieffer (BCS) high-temperature superconductor. The Q-carbon is synthesized by ultrafast melting and quenching, allowing for high B-doping concentrations which increase the superconducting transition temperature (Tc) to 36 K (compared to 4 K for B-doped diamond). The increase in Tc is attributed to the increased density of energy states near the Fermi level in B-doped Q-carbon, which give rise to superconducting states via strong electron-phonon coupling below Tc. These shallow-level energy states, however, are challenging to map due to limited spatial and energy resolution. Here, we use ultrahigh energy resolution monochromated electron energy-loss spectroscopy (EELS), to detect and visualize the newly formed shallow-level energy states (vibrational modes) near the Fermi level (ranging 30–100 meV) of the B-doped Q-carbon. In this work, we establish the significance of high-resolution EELS in understanding the superconducting behavior of BCS superconducting C-based materials, which demonstrate a phenomenal enhancement in the presence of shallow-level energy states.

36 MATERIALS SCIENCE↗

Fine-structure calculations of energy levels, oscillator strengths, and transition probabilities for sulfur-like iron, Fe XI

Energy levels, oscillator strengths, and transition probabilities for transitions among the 14 LS states belonging to configurations of sulfur-like iron, Fe XI, have been calculated. These states are represented by configuration interaction wavefunctions and have configurations 3s{sup 2}3p{sup 4}, 3s3p{sup 5}, 3s{sup 2}3p{sup 3}3d, 3s{sup 2}3p{sup 3}4s, 3s{sup 2}3p{sup 3}4p, and 3s{sup 2}3p{sup 3}4d, which give rise to 123 fine-structure energy levels. Extensive configuration interaction calculations using the CIV3 code have been performed. To assess the importance of relativistic effects, the intermediate coupling scheme by means of the Breit–Pauli Hamiltonian terms, such as the one-body mass correction and Darwin term, and spin–orbit, spin–other-orbit, and spin–spin corrections, are incorporated within the code. These incorporations adjusted the energy levels, therefore the calculated values are close to the available experimental data. Comparisons between the present calculated energy levels as well as oscillator strengths and both experimental and theoretical data have been performed. Our results show good agreement with earlier works, and they might be useful in thermonuclear fusion research and astrophysical applications. -- Highlights: •Accurate atomic data of iron ions are needed for identification of solar corona. •Extensive configuration interaction wavefunctions including 123 fine-structure levels have been calculated. •The relativistic effects by means of the Breit–Pauli Hamiltonian terms are incorporated. •This incorporation adjusts the energy levels, therefore the calculated values are close to experimental values.

74 ATOMIC AND MOLECULAR PHYSICS↗

A block-tridiagonal solver with two-level parallelization for finite element-spectral codes

Two-level parallelization is introduced to solve a massive block-tridiagonal matrix system. One-level is used for distributing blocks whose size is as large as the number of block rows due to the spectral basis, and the other level is used for parallelizing in the block row dimension. The reason for the added parallelization dimension is to retard the saturation of the scaling due to communication overhead and inefficiencies in the single-level parallelization only distributing blocks. As a technique for parallelizing the tridiagonal matrix, the combined method of “Partitioned Thomas method” and “Cyclic Odd–Even Reduction” is implemented in an MPI-Fortran90 based finite element-spectral code (TORIC) that calculates the propagation of electromagnetic waves in a tokamak. The two-level parallel solver using thousands of processors shows more than 5 times improved computation speed with the optimized processor grid compared to the single-level parallel solver under the same conditions. Three-dimensional RF field reconstructions in a tokamak are reflected as examples of the physics simulations that have been enabled by this algorithmic advance.

97 MATHEMATICS AND COMPUTING↗

Cosmogenic surface exposure ( 10 Be) dating of raised beaches in Marguerite bay, Antarctic Peninsula: Implications for relative sea-level history

Understanding the dynamics of ice mass loss in polar regions is crucial for deciphering climate change and Glacio Isostatic Adjustment patterns. This study focuses on Marguerite Bay, located in the south-central Antarctic Peninsula. We dated raised beaches to investigate relative sea-level changes using the cosmogenic surface exposure ( 10 Be) method. Previous studies have provided valuable insights into the region's glacial history, but limitations in dating techniques and age estimates necessitate further investigation. By analysing raised shingle beaches in Gaul Cove of Horseshoe Island and the southern coast of Calmette Bay, this research aims to contribute relative sea-level change history for these areas. In Horseshoe Island's Gaul Cove, raised beaches clustered on prominent steps reveal a 15 m relative sea-level change over the last 3.31 ka. Differently, Calmette Bay exhibits a 36 m relative sea-level fall over the last 7.29 ka. Finally, these findings indicate significant and differential glacial-isostatic adjustments in both regions during the middle and late Holocene. Additionally, our data reveal accelerated sea-level fall periods corresponding to Holocene deglaciation and glacial advance events, indicating the shorelines' relative sea-level change sensitivity to climate change.

58 GEOSCIENCES↗

Assessing methane oxidation under landfill covers and its contribution to the above atmospheric CO{sub 2} levels: The added value of the isotope ({delta}{sup 13}C and {delta}{sup 18}O CO{sub 2}; {delta}{sup 13}C and {delta}D CH{sub 4}) approach

Highlights: Black-Right-Pointing-Pointer Comparison of the isotope and mass balance approaches to evaluate the level of methane oxidation within a landfill. Black-Right-Pointing-Pointer The level of methane oxidation is not homogenous under the landfill cover and is strongly correlated to the methane flux. Black-Right-Pointing-Pointer Isotope tracking of the contribution of the methane oxidation to the CO{sub 2} concentrations in the ambient air. - Abstract: We are presenting here a multi-isotope approach ({delta}{sup 13}C and {delta}{sup 18}O of CO{sub 2}; {delta}{sup 13}C and {delta}D of CH{sub 4}) to assess (i) the level(s) of methane oxidation during waste biodegradation and its migration through a landfill cover in Sonzay (France), and (ii) its contribution to the atmospheric CO{sub 2} levels above the surface. The isotope approach is compared to the more conventional mass balance approach. Results from the two techniques are comparable and show that the CH{sub 4} oxidation under the landfill cover is heterogenous, with low oxidation percentages in samples showing high biogas fluxes, which was expected in clay covers presenting fissures, through which CH{sub 4} is rapidly transported. At shallow depth, more immobile biogas pockets show a higher level of CH{sub 4} oxidation by the methanotrophic bacteria. {delta}{sup 13}C of CO{sub 2} samples taken at different heights (from below the cover up to 8 m above the ground level) were also used to identify and assess the relative contributions of its main sources both under the landfill cover and in the surrounding atmosphere.

54 ENVIRONMENTAL SCIENCES↗

The minimum-uncertainty coherent states for Landau levels

The Glauber minimum-uncertainty coherent states with two variables for Landau levels, based on the representation of Weyl-Heisenberg algebra by two different modes, have been studied about four decades ago. Here, we introduce new two-variable coherent states with minimum uncertainty relationship for Landau levels in three different methods: the infinite unitary representation of su(1, 1) is realized in two different methods, first, by consecutive levels with the same energy gaps and also with the same value for z-angular momentum quantum number, then, by shifting z-angular momentum mode number by two units while the energy level remaining the same. Besides, for su(2), whether by lowest Landau levels or Landau levels with lowest z-angular momentum, just one finite unitary representation is introduced. Having constructed the generalized Klauder-Perelomov coherent states, for any of the three representations, we obtain their Glauber coherency by displacement operator of Weyl-Heisenberg algebra.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Characterization of deep level defects and thermally stimulated depolarization phenomena in La-doped TlInS{sub 2} layered semiconductor

Lanthanum-doped high quality TlInS{sub 2} (TlInS{sub 2}:La) ferroelectric-semiconductor was characterized by photo-induced current transient spectroscopy (PICTS). Different impurity centers are resolved and identified. Analyses of the experimental data were performed in order to determine the characteristic parameters of the extrinsic and intrinsic defects. The energies and capturing cross section of deep traps were obtained by using the heating rate method. The observed changes in the Thermally Stimulated Depolarization Currents (TSDC) near the phase transition points in TlInS{sub 2}:La ferroelectric-semiconductor are interpreted as a result of self-polarization of the crystal due to the internal electric field caused by charged defects. The TSDC spectra show the depolarization peaks, which are attributed to defects of dipolar origin. These peaks provide important information on the defect structure and localized energy states in TlInS{sub 2}:La. Thermal treatments of TlInS{sub 2}:La under an external electric field, which was applied at different temperatures, allowed us to identify a peak in TSDC which was originated from La-dopant. It was established that deep energy level trap BTE43, which are active at low temperature (T ≤ 156 K) and have activation energy 0.29 eV and the capture cross section 2.2 × 10{sup −14} cm{sup 2}, corresponds to the La dopant. According to the PICTS results, the deep level trap center B5 is activated in the temperature region of incommensurate (IC) phases of TlInS{sub 2}:La, having the giant static dielectric constant due to the structural disorders. From the PICTS simulation results for B5, native deep level trap having an activation energy of 0.3 eV and the capture cross section of 1.8 × 10{sup −16} cm{sup 2} were established. A substantial amount of residual space charges is trapped by the deep level localized energy states of B5 in IC-phase. While the external electric field is applied, permanent dipoles, which are originated from the charged B5 deep level defects, are aligned in the direction of the applied electric field and the equilibrium polarization can be reached in a relatively short time. When the polarization field is maintained, while cooling the temperature of sample to a sufficiently low degrees, the relaxation times of the aligned dipoles drastically increases. Practically, frozen internal electric field or electrets states remain inside the TlInS{sub 2}:La when the applied bias field is switched off. The influence of deep level defects on TSDC spectra of TlInS{sub 2}:La has been revealed for the first time.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Subgap time of flight: A spectroscopic study of deep levels in semi-insulating CdTe:Cl

We report on a study of deep levels in semi-insulating CdTe:Cl by means of a time-of-flight spectral approach. By varying the wavelength of a pulsed optical source within the CdTe energy gap, transitions to/from localized levels generate free carriers which are analysed through the induced photocurrent transients. Both acceptor-like centers, related to the A-center, and a midgap level, 0.725 eV from the valence band, have been detected. The midgap level is close to the Fermi level and is possibly a recombination center responsible for the compensation mechanism. When the irradiance is varied, either linear or quadratic dependence of the electron and hole collected charge are observed, depending on the dominant optical transitions. The analysis discloses the potentiality of such a novel approach exploitable in the field of photorefractive materials as well as for deep levels spectroscopy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Identification of the defect dominating high temperature reverse leakage current in vertical GaN power diodes through deep level transient spectroscopy

Deep level defects in wide bandgap semiconductors, whose response times are in the range of power converter switching times, can have a significant effect on converter efficiency. We use Deep Level Transient Spectroscopy (DLTS) to evaluate such defect levels in the n- drift layer of vertical GaN (v-GaN) power diodes with VBD ~ 1500 V. DLTS reveals three energy levels that are at ~0.6 eV (highest density), ~0.27 eV (lowest density) and ~ 45 meV (a dopant level) from the conduction band. Dopant extraction from Capacitance-Voltage measurement test (C-V) at multiple temperatures enables trap density evaluation, and the ~0.6 eV trap has a density of 1.2 × 10 15 cm -3 . Here, the 0.6 eV energy level and its density are similar to a defect that is known to cause current collapse in GaN based surface conducting devices (like HEMTs). Analysis of reverse bias currents over temperature in the v-GaN diodes indicates a predominant role of the same defect in determining reverse leakage current at high temperatures, reducing switching efficiency.

42 ENGINEERING↗