Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAOS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Coupling a terrestrial biogeochemical model to the common land model

A terrestrial biogeochemical model (CASACNP) was coupled to a land surface model (the Common Land Model, CoLM) to simulate the dynamics of carbon substrate in soil and its limitation on soil respiration. The combined model, CoLM-CASACNP, was able to predict long-term carbon sources and sinks that CoLM alone could not. The coupled model was tested using measurements of belowground respiration and surface fluxes from two forest ecosystems. The combined model simulated reasonably well the diurnal and seasonal variations of net ecosystem carbon exchange, as well as seasonal variation in the soil respiration rate of both the forest sites chosen for this study. However, the agreement between model simulations and actual measurements was poorer under dry conditions. The model should be tested against more measurements before being applied globally to investigate the feedbacks between the carbon cycle and climate change.

54 ENVIRONMENTAL SCIENCES↗

Projected changes in the terrestrial and oceanic regulators of climate variability across sub-Saharan Africa

Future changes in the sign and intensity of ocean–land–atmosphere interactions have been insufficiently studied, despite implications for regional climate change projections, extreme event statistics, and seasonal climate predictability. In response to this deficiency, the present study focuses on projected responses to the enhanced greenhouse effect in: (1) the mean state of the atmosphere and land surface; (2) oceanic and terrestrial drivers of sub-Saharan climate variability; and (3) total seasonal climate predictability of sub-Saharan Africa, a region known for its pronounced land–atmosphere coupling. Analysis focuses on output from 23 Earth System Models in the Coupled Model Intercomparison Project Phase Five for the late twentieth and twenty-first centuries. It is projected that the greatest warming across sub-Saharan Africa will occur over the Sahel, the monsoon season will become more persistent into late summer and autumn, short rains in the Horn of Africa (HOA) will intensify, and leaf area index will increase across the HOA. Stepwise Generalized Equilibrium Feedback Assessment, i.e. a multivariate statistical approach, is applied to the model output over sub-Saharan Africa in order to explore the oceanic and terrestrial drivers of regional climate. The models indicate that the study region’s climate variability is dominated by oceanic drivers, with secondary contributions from soil moisture and very modest impacts from vegetation. Overall, the general model consensus of future projections indicates a concerning diminished seasonal predictability of sub-Saharan African regional climate based on key oceanic and terrestrial predictors and an elevated role of the land surface (associated with soil moisture anomalies) compared to oceanic drivers in regulating regional climate variability.

54 ENVIRONMENTAL SCIENCES↗

Crystal structure, thermal expansivity, and elasticity of OH-chondrodite: Trends among dense hydrous magnesium silicates

Here, we report the structure and thermoelastic properties of OH-chondrodite. The sample was synthesized at 12 GPa and 1523 K, coexisting with hydroxyl-clinohumite and hydrous olivine. The Fe content Fe/(Fe+Mg) is 1.1 mol%, and the monoclinic unit-cell parameters are: a = 4.7459(2) Å, b = 10.3480(7) Å, c = 7.9002(6) Å, α = 108.702(7)°, and V = 367.50(4) Å3. At ambient conditions the crystal structure was refined in space group P 2 1 /b from 1915 unique reflection intensities measured by single-crystal x-ray diffraction. The volume thermal expansion coefficient was measured between 150 and 800 K, resulting in α V = 2.8(5)×10 -9 (K -2 ) × T + 40.9(7) × 10 -6 (K -1 ) – 0.81(3)(K)/T 2 , with an average value of 38.0(9)×10 -6 K -1 . Brillouin spectroscopy was used to measure a set of acoustic velocities from which all thirteen components (C ij ) of the elastic tensor were determined. The Voigt-Reuss-Hill average of the moduli yield for the adiabatic bulk modulus, K S 0 = 117.9(12) GPa, and for shear modulus, G 0 = 70.1(5) GPa. The Reuss bound on the isothermal bulk modulus (K T0 ) is 114.2(14) GPa. From the measured thermodynamic properties, the Grüneisen parameter (γ) is calculated to be 1.66(4). Fitting previous static compression data using our independently measured bulk modulus (isothermal Reuss bound) as a fixed parameter, we refined the first pressure derivative of the bulk modulus, K T ’ = 5.5(1). Systematic trends between H 2 O content and physical properties are evaluated among dense hydrous magnesium silicate (DHMS) phases along the forsterite-brucite join.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Physics-informed neural networks (PINNs) for fluid mechanics: a review

Despite the significant progress over the last 50 years in simulating flow problems using numerical discretization of the Navier–Stokes equations (NSE), we still cannot incorporate seamlessly noisy data into existing algorithms, mesh-generation is complex, and we cannot tackle high-dimensional problems governed by parametrized NSE. Moreover, solving inverse flow problems is often prohibitively expensive and requires complex and expensive formulations and new computer codes. Here, we review flow physics-informed learning, integrating seamlessly data and mathematical models, and implement them using physics-informed neural networks (PINNs). Here, we demonstrate the effectiveness of PINNs for inverse problems related to three-dimensional wake flows, supersonic flows, and biomedical flows.

42 ENGINEERING↗

H-D Exchange of Simple Aromatics as a Measure of Brønsted-Acid Site Strengths in Solids

The relative Brønsted-acid strengths of H-[Al]ZSM-5, H-[Fe]ZSM-5, H-[B]ZSM-5, silicalite, P-SPP, tungstated zirconia, ZrO2, and γ-Al2O3 were studied using H-D exchange with toluene and chlorobenzene. Temperature programmed desorption (TPD) of toluene-h8 and chlorobenzene-h5 from the deuterated forms of H-[Al]ZSM-5, H-[Fe]ZSM-5, and P-SPP demonstrated that the temperature at which H-D exchange rates become significant change with the proton affinity of the aromatic molecule and the strength of the Brønsted sites. The steady-state, gas-phase reaction between D2O and the aromatic molecules were consistent with the TPD results and allowed the Brønsted-acid site strengths to be ordered as follows: H-[Al]ZSM-5 > H-[Fe]ZSM-5 > tungstated zirconia > P-SPP > H-[B]ZSM-5. H-D exchange was also observed at high temperatures with ZrO2 and γ-Al2O3 but it appears that the reaction mechanism with these Lewis acids is different because reaction with toluene and chlorobenzene occur at nearly the same temperature. It is suggested that the H-D exchange reaction with simple aromatic molecules is a useful way to probe Brønsted acidity in solids

bio-inspired↗

A Study of Support Effects for CH 4 and CO Oxidation over Pd Catalysts on ALD-Modified Al 2 O 3

Interactions between a metal and its oxide support can influence CO and CH 4 oxidation, but promotion by the support can be difficult to study because oxides can have different surface structures and surface areas. To focus on the chemical aspects of support promotion for CO and CH 4 oxidation, this study investigated the effect of support composition on Pd catalysts by preparing uniform films of NiO, Co 3 O 4 , Fe 2 O 3 , MnO 2 , CeO 2 , and ZrO 2 on γ-Al 2 O 3 using Atomic Layer Deposition (ALD). The structure of the films was characterized by XRD and STEM, and catalysts with ~ 1-wt% Pd were examined for CO and CH 4 oxidation. CeO 2 /γ-Al 2 O 3 was unique among the supports in greatly stabilizing the Pd dispersion to 1173 K. Rates for CO oxidation were enhanced by the presence of CeO 2 , Fe 2 O 3 , and MnO 2 , while the other oxides had no promotional effect. For CH 4 oxidation, only NiO and Co 3 O 4 were modest promoters, while the other reducible oxides even showed a negative effect on rates. Finally, possible reasons for the differences between CH 4 and CO oxidation activities are discussed.

42 ENGINEERING↗

Synthesis and characterization of multicyclic oxadiazoles and 1-hydroxytetrazoles as energetic materials

Synthesis and characterization of several multicyclic oxadiazoles, 3,5-bis(4-nitrofurazan-3-yl)-1,2,4-oxadiazole, 3,3'-bis(4-nitrofurazan-3-yl)-5,5'-bi(1,2,4-oxadiazole), 3-(4-nitrofurazan-3-yl)-1,2,4-oxadiazol-5-amine, and salts of 1-hydroxytetrazoles, ammonium 5,5'-(1,2,4-oxadiazole-3,5-diyl)bis(1H-tetrazol-1-olate) and hydroxylammonium 5,5'-{[3,3'-bi(1,2,4-oxadiazole)]-5,5'-diyl}bis(1H-tetrazol-1-olate), as energetic materials are reported here. Two of the compounds, 3,5-bis(4-nitrofurazan-3-yl)-1,2,4-oxadiazole and 3,3'-bis(4-nitrofurazan-3-yl)-5,5'-bi(1,2,4-oxadiazole), have attractive single crystal densities of 1.91 and 1.94 g·cm –3 (at 20°C), respectively. The design of these materials has been based on the idea that these multicyclic compounds with a 1,2,4-oxadiazole core will have good thermal stability and high density because of their 3,5-substitution pattern and the possibility of achieving a planar conformation. The various synthetic approaches and interesting chemistry observed during the construction of these new heterocycles has been described.

1,2,4-oxadiazoles↗

Skinny kelp (Saccharina angustissima) provides valuable genetics for the biomass improvement of farmed sugar kelp (Saccharina latissima)

Abstract Saccharina latissima (sugar kelp) is one of the most widely cultivated brown marine macroalgae species in the North Atlantic and the eastern North Pacific Oceans. To meet the expanding demands of the sugar kelp mariculture industry, selecting and breeding sugar kelp that is best suited to offshore farm environments is becoming necessary. To that end, a multi-year, multi-institutional breeding program was established by the U.S. Department of Energy's (DOE) Advanced Research Projects Agency-Energy (ARPA-E) Macroalgae Research Inspiring Novel Energy Resources (MARINER) program. Hybrid sporophytes were generated using 203 unique gametophyte cultures derived from wild-collected Saccharina spp . for two seasons of farm trials (2019–2020 and 2020–2021). The wild sporophytes were collected from 10 different locations within the Gulf of Maine (USA) region, including both sugar kelp ( Saccharina latissima ) and the skinny kelp species ( Saccharina angustissima ). We harvested 232 common farm plots during these two seasons with available data. We found that farmed kelp plots with skinny kelp as parents had an average increased yield over the mean (wet weight 2.48 ± 0.90 kg m −1 and dry weight 0.32 ± 0.10 kg m −1 ) in both growing seasons. We also found that blade length positively correlated with biomass in skinny kelp x sugar kelp crosses or pure sugar kelp crosses. The skinny x sugar progenies had significantly longer and narrower blades than the pure sugar kelp progenies in both seasons. Overall, these findings suggest that sugar x skinny kelp crosses provide improved yield compared to pure sugar kelp crosses.

59 BASIC BIOLOGICAL SCIENCES↗

Component Analysis and Identification of Black Tahitian Cultured Pearls From the Oyster Pinctada margaritifera Using Spectroscopic Techniques

Raman spectroscopy, ultraviolet, visible, and near infrared (UV–Vis–NIR) reflectance spectroscopy, and X-ray fluorescence (XRF) spectroscopy were used to characterize black Tahitian cultured pearls and imitations of these saltwater cultured pearls produced by γ-irradiation, and by coloring of cultured pearls with silver nitrate or organic dyes. Raman spectra indicated that aragonite was the major constituent of these four types of pearl. Using Raman spectroscopy at an excitation wavelength of 514 nm, black Tahitian cultured pearls exhibited characteristic 1100–1700 cm{sup –1} bands. These bands were attributed to various organic components, including conchiolin and other black biological pigments. The peaks shown by saltwater cultured pearls colored with organic dyes varied with the type of dye used. Tahitian cultured and organic-dye-treated saltwater cultured pearls were easily identified by Raman spectroscopy. UV–Vis–NIR reflectance spectra showed bands at 408, 497, and 700 nm derived from porphyrin pigment and other black pigments. The spectra of dye-treated black saltwater pearls showed absorption peaks at 216, 261, 300, and 578 nm. The 261-nm absorption band disappeared from the spectra of γ-irradiated saltwater cultured pearls. This suggests the degradation of conchiolin in the γ-irradiated saltwater cultured pearls. XRF analysis revealed the presence of Ag on the surface of silver nitrate-dyed saltwater cultured pearls.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of a New 4-Amino-1,8-Naphthalimide Derivative as a Fluorescent Probe for Monitoring the Divalent Copper Ion

This article presents the design and synthesis of a new variant of the 4-amino-1,8-naphthalimide fluorescent probe for monitoring the divalent copper ion, Cu{sup 2+}. The probe BRST, functionalized with two propionic carboxylic acid groups in its receptor moiety, demonstrated high selectivity and sensitivity for the detection of Cu{sup 2+} in competitive media of various metal ions in DMSO/HEPES buffer solution (1:1; pH 7.4), with a fluorescence quenching of 75.41%. Besides its good linearity with Cu{sup 2+}, the probe yielded commendable values of the association constant and the detection limit, 5.54 × 10{sup 5} M{sup –1} and 4.33 × 10{sup –9} M, respectively. The quenching of the fluorescence intensity of the sensor in the presence of Cu{sup 2+} ions is attributable to the strong paramagnetic nature of the Cu{sup 2+} ion. The fluorescence 'turn off' behavior of this simple and effective probe was successfully applied for the determination of Cu{sup 2+} levels in untreated water samples, with excellent recovery rates of 98–105.8%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Design of Terahertz Bio-Absorber Using Plum Flower Curves

A double peaks bio-absorber, which includes two metal layers and one dielectric layer, is proposed. The surface metal layer of the bio-absorber is a square array that consists of a plum shape metal cell that can produce double resonance absorption. By studying the surface current and electric field z component, the double peak is shown to originate from the two distinct resonance modes of the plum flower curves induced by the incident electromagnetic wave. Due to the symmetrical structure, the proposed bio-absorber is not sensitive to the polarization direction of incident waves and can maintain high absorption rates in a wide, range of angles.

42 ENGINEERING↗

A deep learning framework for layer-wise porosity prediction in metal powder bed fusion using thermal signatures

Abstract Part quality manufactured by the laser powder bed fusion process is significantly affected by porosity. Existing works of process–property relationships for porosity prediction require many experiments or computationally expensive simulations without considering environmental variations. While efforts that adopt real-time monitoring sensors can only detect porosity after its occurrence rather than predicting it ahead of time. In this study, a novel porosity detection-prediction framework is proposed based on deep learning that predicts porosity in the next layer based on thermal signatures of the previous layers. The proposed framework is validated in terms of its ability to accurately predict lack of fusion porosity using computerized tomography (CT) scans, which achieves a F1-score of 0.75. The framework presented in this work can be effectively applied to quality control in additive manufacturing. As a function of the predicted porosity positions, laser process parameters in the next layer can be adjusted to avoid more part porosity in the future or the existing porosity could be filled. If the predicted part porosity is not acceptable regardless of laser parameters, the building process can be stopped to minimize the loss.

42 ENGINEERING↗

Size, structure, and luminescence of Nd 2 Zr 2 O 7 nanoparticles by molten salt synthesis

Pyrochlore materials with novel properties are in demand with multifunctional applications such as optoelectronics, scintillator materials, and theranostics. Many reports have already indicated the importance of the synthesis technique for Nd 2 Zr 2 O 7 (NZO) nanoparticles (NPs); however, no explanation has been provided for the reason behind the nature of its phase selectivity. Here, we have explored the structural and optical properties of the NZO NPs synthesized by a molten salt synthesis method. We have synthesized size-tunable NZO NPs and correlated the particle size with their structural behavior and optical performance. All NZO NPs are stabilized in defect fluorite phase. Neutron diffraction provided insight on the behavior of oxygen in the presence of heavy atoms. We have collected bright amalgam of blue and green emission on UV irradiation due to the presence of oxygen vacancies from these NPs. We have carried out in situ XRD and Raman investigations to observe the temperature-induced phase transformation in a controlled argon environment. Interestingly, we have not observed phase change for the molten salt synthesized fluorite NZO NPs; however, we observed phase transformation from a precursor stage to pyrochlore phase by in situ XRD directly. Finally, these observations provide a new strategy to synthesize nanomaterials phase-selectively for a variety of applications in materials science.

36 MATERIALS SCIENCE↗

Effect of proton irradiation on anatase TiO 2 nanotube anodes for lithium-ion batteries

The role of defects in the charge transfer and transport properties of electrode materials for lithium-ion batteries has recently garnered increased interest. It is widely known that ion irradiation promotes the formation of defects within a crystalline solid. Within all ion species used for irradiation, protons are expected to create primarily simple Frenkel pair point defects without significantly changing the stoichiometry of the damaged region of the target material. This work investigates the effect of proton irradiation at varying temperatures on the electrochemical properties of anatase TiO 2 nanotube (TiO2-NT) electrode for lithium-ion battery applications. Anatase TiO 2 -NTs are irradiated at both room temperature (25 °C) and 250 °C and compared with non-irradiated control specimens. Characterization by Raman spectroscopy and XRD suggests that the irradiation at both temperatures does not alter the long-range order of the nanotubes. Yet, high-resolution TEM reveals that defect clusters are formed upon irradiation and increase in size with increasing temperature. Both irradiated samples exhibit increased capacity and enhanced rate capability compared with the non-irradiated control, which can be explained by increased storage sites as well as improved Li + diffusivity due to the presence of irradiation-induced defects. This study presents a unique perspective on pathways to engineer functional nanostructured electrode materials by tailoring irradiation conditions.

25 ENERGY STORAGE↗

Preparation of nanofibrillated cellulose and application in reinforced PLA/starch nanocomposite film

Polylactic acid (PLA), one of the most promising biopolymers with exceptional properties, is being used in a wide variety of applications in diverse fields. However, low degradation rate, relatively high cost and inherently high brittleness of PLA severely hamper its further development, particularly in functional nanocomposites for bio-based packaging. In the present work, green, biodegradable and reinforced PLA-based nanocomposite films were designed and prepared, where starch was incorporated for reducing the overall cost of nanocomposites for large-scale application, and nanofibrillated cellulose (NFC) isolated from microcrystalline cellulose (MCC) via a completely green process was employed as a reinforcing phase. Initially, the morphology structure and dimension of the NFC samples isolated by high-pressure homogenization (HPH) coupled with hot water pretreatment were characterized using SEM, FT-IR, XRD, and laser scattering particle analyzer. Moreover, the effect of NFC loadings on the rheological behavior of the PLA based nanocomposite suspensions and the overall properties of the corresponding nanocomposite films were investigated. Results indicated that increased NFC loadings reduced the shear viscosity and shear stress of the nanocomposite suspensions. Furthermore, the desired PLA/starch/NFC nanocomposite films were found to exhibit improved tensile strength, Young’s modulus and reduced air permeability in comparison to pure PLA/starch films. This work offered an effective route for the preparation of biodegradable and reinforced PLA-based nanocomposite films, which may be promising bio-nanocomposite materials for food packaging applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Lateral Shifts for Spin Electrons in a Hybrid Magnetic-Electric-Barrier Nanostructure Modulated by Spin-Orbit Couplings

We theoretically investigate how to modulate spin-dependent lateral shifts by the spin-orbit coupling (SOC) in a hybrid magnetic-electric-barrier (MEB) nanostructure, which can be experimentally realized by depositing a ferromagnetic (FM) stripe and a Schottky metal (SM) stripe on the top and bottom of the semiconductor heterostructure, respectively. Two kinds of ROCs, Rashba SOC (RSOC) and Dresselhaus SOC (DSOC), are taken into account fully. The Schrödinger equation of the spin electron in the hybrid MEB nanostructure is exactly solved by using the improved transfer-matrix method (ITMM), and the lateral shift and its spin polarization are numerically calculated with the help of the stationary phase method (SPM). Theoretical analysis indicates that the spin polarization effect in the lateral shift still exists in the hybrid MEB nanostructure when the SOCs are considered. Numerical simulations show that both magnitude and sign of the spin polarization effect in lateral shifts vary strongly with the strengths of RSOC and DSOC. These interesting features may offer an effective means to control the behavior of spin-polarized electrons in the semiconductor nanostructure, and such a hybrid MEB nanostructure serves as a SOC-manipulable spatial spin splitter for spintronic applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗