Search NASA⌕ Search

SEARCH · Search NASA

Results for “Material microstructure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Microstructure and magnetic properties of sintered Nd-Fe-B magnets with high hydrogen content

The effects of hydrogen contents after the process of hydrogen decrepitation on the magnetic properties and corrosion resistance of sintered Nd-Fe-B permanent magnets have been studied. The intrinsic coercivity of the magnets increases and the remanence decreases with increasing hydrogen content. High residue hydrogen content in the starting ingot leads to the reaction of hydrogenation, disproportionation, desorption and recombination in the sinter process resulting in magnets with low remanence. The results of highly accelerated temperature/humidity stress test indicate that excessive hydrogen contents are harmful to the corrosion resistance of the magnets. The influences of residue hydrogen contents on the corrosion resistance of magnets dominate only when the residue hydrogen content exceeds 1300 parts per million.

36 MATERIALS SCIENCE↗

Third-order nonlinear optical properties of Bi{sub 2}S{sub 3} nanocrystals doped in sodium borosilicate glass studied with Z-scan technique

Research highlights: {yields} Sol-gel method to realize the synthesis of Bi{sub 2}S{sub 3} nanocrystals doped in the glass. {yields} High dispersion and narrow distribution of Bi{sub 2}S{sub 3} nanocrystals in the glass. {yields}Z-scan technique employed for nonlinear optical properties of the glass. {yields} Observation that an obvious third-order optical nonlinear properties in the glass. -- Abstract: The third-order nonlinear optical properties of Bi{sub 2}S{sub 3} nanocrystals doped in sodium borosilicate glass are measured by Z-scan technique. The microstructures of the glass are characterized by means of X-ray diffraction, transmission electron microscopy, scanning transmission electron microscopy, energy dispersion X-ray spectra, and high-resolution transmission electron microscopy. The results show that the Bi{sub 2}S{sub 3} nanocrystals ranging from 10 to 30 nm are determined to be of the orthorhombic crystalline phase, and the third-order optical nonlinear refractive index {gamma}, absorption coefficient {beta}, and susceptibility {chi}{sup (3)} of the glass are determined to be 2.56 x 10{sup -16} m{sup 2} W{sup -1}, 4.13 x 10{sup -10} mW{sup -1}, and 1.43 x 10{sup -10} esu, respectively.

36 MATERIALS SCIENCE↗

Effect of Co on the thermal stability and magnetic properties of AlNiCo 8 alloys

The magnetic properties, microstructure, and reversible temperature coefficient of magnetic flux of Alnico 8 alloys with the different Co and Ti have been investigated in this paper. The Alnico alloys containing 34, 36, 38, and 40 mass percent cobalt were fabricated by the conventional casting method including thermomagnetic treatment. The transmission electron microscopy (TEM) testing shows that there are more α1 phases particles with the diameter of less than 10 nm appearing in the matrix with the increasing of the content of Co and Ti. The thermal stability of Alnico 8 alloys deteriorates with the increasing of the content of Co and Ti, which are caused mainly by the decrease of the degree of particle alignment and particle perfection.

36 MATERIALS SCIENCE↗

Role of bromine doping on the photovoltaic properties and microstructures of CH{sub 3}NH{sub 3}PbI{sub 3} perovskite solar cells

Organic-inorganic hybrid heterojunction solar cells containing CH{sub 3}NH{sub 3}PbI{sub 3} perovskite compound were fabricated using mesoporous TiO{sub 2} as the electronic transporting layer and spirobifluorence as the hole-transporting layer. The purpose of the present study is to investigate role of bromine (Br) doping on the photovoltaic properties and microstructure of CH{sub 3}NH{sub 3}PbI{sub 3} perovskite solar cells. Photovoltaic, optical properties and microstructures of perovskite-based solar cells were investigated. The X-ray diffraction identified crystal structure of the perovskite layer doped with Br in the solar cell. Scanning electron microscopy observation showed a different behavior of surface morphology and the perovskite crystal structure on the TiO{sub 2} mesoporous structure depending on extent amount of hydrogen doping of Br. The role of bromide halogen doping on the perovskite crystal structure and photovoltaic properties was due to improvement of carrier mobility, optimization of electron structure, band gap related with the photovoltaic parameters of V{sub oc}, J{sub sc} and η. Energy diagram and photovoltaic mechanism of the perovskite solar cells varied with halogen doping was discussed by experimental results.

36 MATERIALS SCIENCE↗

X-ray microtomography shows pore structure and tortuosity in alkali-activated binders

Durability of alkali-activated binders is of vital importance in their commercial application, and depends strongly on microstructure and pore network characteristics. X-ray microtomography ({mu}CT) offers, for the first time, direct insight into microstructural and pore structure characteristics in three dimensions. Here, {mu}CT is performed on a set of sodium metasilicate-activated fly ash/slag blends, using a synchrotron beamline instrument. Segmentation of the samples into pore and solid regions is then conducted, and pore tortuosity is calculated by a random walker method. Segmented porosity and diffusion tortuosity are correlated, and vary as a function of slag content (slag addition reduces porosity and increases tortuosity), and sample age (extended curing gives lower porosity and higher tortuosity). This is particularly notable for samples with {>=} 50% slag content, where a space-filling calcium (alumino)silicate hydrate gel provides porosity reductions which are not observed for the sodium aluminosilicate ('geopolymer') gels which do not chemically bind water of hydration.

36 MATERIALS SCIENCE↗

Low-temperature sintering of temperature-stable LaNbO{sub 4} microwave dielectric ceramics

We demonstrate the correlation between sintering behavior and microstructural observations in low-temperature sintered, LaNbO{sub 4} microwave ceramics. Small CuO additions to LaNbO{sub 4} significantly lowered the sintering temperature from 1250 to 950 {sup o}C. To elucidate the sintering mechanism, the internal microstructure of the sample manipulated by a focused ion beam (FIB) was investigated using transmission electron microscopy (TEM) and energy-dispersive spectroscopy (EDS). LaNbO{sub 4} with 3 wt% CuO sintered at 950 {sup o}C for 2 h possessed the following excellent microwave dielectric properties: a quality factor (Qxf) of 49,000 GHz, relative dielectric constant ({epsilon}{sub r}) of 19.5, and temperature coefficient of resonant frequency ({tau}{sub f}) of 1 ppm/{sup o}C. The ferroelastic phase transformation was also investigated using in situ X-ray diffraction (XRD) to explain the variation of {tau}{sub f} in low-temperature sintered LaNbO{sub 4} as a function of CuO content.

36 MATERIALS SCIENCE↗

In situ laser-based resonant ultrasound measurements of microstructure mediated mechanical property evolution

In situ laser-based resonant ultrasound spectroscopy is used to characterize the development of a recrystallized microstructure in a high purity copper sample. The modal shapes, used for mode identification, of several resonant modes are determined before and after annealing by raster scanning the laser interferometric probe. This information is used to isolate the motion of individual modes during high temperature annealing. The evolution of a particular mode during annealing is examined in detail. During recrystallization, the center frequency of this mode shifts by approximately 20% of the original value. Using electron backscatter data it is shown that the majority of this shift is due to changes in the polycrystal average elastic stiffness tensor, driven by changes in texture, and that changes in dislocation density and pinning length are secondary influences.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Kernel Enriched Meshfree Multiphysics Degradation Modeling of Energy Storage Materials

Energy storage materials exhibit strong electro-chemo-mechanical coupling and highly anisotropic material properties, contributing to the formation and propagation of micro-cracking during charge/discharge cycling and ultimately diminishing performance and service life. With microstructural images supplied by the National Laboratory of the Rockies (NLR), pixel-based meshfree model construction by the reproducing kernel particle method (RKPM) is used to represent the complex material microstructures that dictate the coupled physics of these systems. Traditional electro-chemo-mechanical models rely on mesh-based finite element methods, which can lead to difficulties in meshing such complex geometries and capturing crack propagation due to mesh dependency. The first kernel enrichment discussed will be the interface modified reproducing kernel (IM-RK) [1, 2], constructed by scaling a smooth kernel function with an interface-distance function to achieve strategic discontinuity types (i.e. weak discontinuities for strain discontinuities and strong discontinuities for cracks) and alleviate Gibbs oscillations near these transition zones. The IM-RK is especially useful for areas in which a known discontinuity-type is expected a priori. The second kernel enrichment to be discussed is a neural network-enhanced reproducing kernel (NN-RK) [3, 4], which is introduced to effectively model non-obvious damage and crack propagation in the material microstructures; the location, orientation, and solution transition near a localization are automatically captured by superimposed block-level NN optimizations. This NN enrichment approach allows for effective modeling of localizations via a fixed background discretization, relieving tedious efforts for adaptive refinement in traditional mesh-based methods. Applications to the heterogeneous microstructures of Li-ion battery cathodes will be presented to demonstrate the effectiveness of the proposed methods. NN-RK is additionally used to inform how crack opening and closure in turn affect the electro-chemo-mechanical responses in the material microstructure. References: [1] Wang, Y., Baek, J., Tang, Y. et al. "Support vector machine guided reproducing kernel particle method for image-based modeling of microstructures," Comput Mech 73, 907-942 (2024). https://doi.org/10.1007/s00466-023-02394-9. [2] Susuki, K., Allen, J. & Chen, J. S.. "Image-based modeling of coupled electro-chemo-mechanical behavior of Li-ion battery cathode using an interface-modified reproducing kernel particle method," Engineering with Computers (2024). https://doi.org/10.1007/s00366-024-02016-9. [3] Baek, J., Chen, J. S., Susuki, K., "Neural Network enhanced Reproducing Kernel Particle Method for Modeling Localizations," International Journal for Numerical Methods in Engineering, Vol. 123, 4422-4454 (2022). https://doi.org/10.1002/nme.7040.

97 MATHEMATICS AND COMPUTING↗

Effects of CrRu-SiO{sub x} underlayer with MgO intermediate layer on the microstructure and magnetic properties of FePt-C thin film

The effect of the CrRu-SiO{sub x} underlayer with different doping concentrations and the thickness of the CrRu underlayer on the microstructure and magnetic properties of FePt-C films were investigated. FePt films exhibited L1{sub 0} (001) texture at various SiO{sub x} doping concentrations. The coercivities were as large as 28 kOe and the slope of M-H loop at coercivity was approximately equal to 1, suggesting that FePt grains were well exchange decoupled. Grain size was only slightly reduced after introducing the CrRu-SiO{sub x} underlayer. But the contact angle between the FePt grains and the MgO intermediate layer around 135 deg. indicated the a MgO intermediate layer was not favored for smaller grains to obtain good L1{sub 0} (001) texture. X-ray photoelectron spectroscopy in-depth profile showed that Si diffused into a whole FePt-C layer and C diffused to the film surface.

36 MATERIALS SCIENCE↗

Properties of Cu-doped ZnO films by RF sputtering method: Thickness dependence

We present results concerning the thickness dependence of structural, morphological and optical properties of the Zn{sub 0.98}Cu{sub 0.02}O films deposited on glass substrates using radio frequency (RF) sputtering method. The microstructure and the chemical state of oxygen, copper and zinc in ZnO and Zn{sub 0.98}Cu{sub 0.02}O films were investigated by X-ray diffraction spectroscopy (XRD) and X-ray photoelectron spectroscopy (XPS), respectively. The results indicate that Zn{sub 0.98}Cu{sub 0.02}O films are the wurtzite structure with strong c-axis orientation. Crystallinity of the films is closely related to the film thickness. With increasing film thickness, there are more surface (mainly nanopores) defects existing in the Zn{sub 0.98}Cu{sub 0.02}O films and surface roughness increases. XRD and XPS data show that the valence state of copper in the Zn{sub 0.98}Cu{sub 0.02}O films is Cu{sup 2+}. The transparency of all films is more than 85% in the visible region.

36 MATERIALS SCIENCE↗

Role of different compatibilizing approaches on the microstructure and mechanical properties of polypropylene/talc composites

Since in a highly filled polymer, a major problem arises from non-uniformity of properties due to the poor dispersion of filler, the application of coupling agents have been directed to overcome this problem and also to enhance the mechanical performance of the composites by improving the adhesion at the interface. In this study, a comparison between two major coupling approaches is conducted: 1) Using PPgMA as a kind of compatibilizer which changes the nature of the matrix, 2) Using titanate coupling agent which takes action at the interface and reacts with hydroxyl groups at the inorganic filler surface, resulting in the formation of monomolecular layer on the inorganic surface to increase compatibility of filler/matrix interface. The comparison is made based on the mechanical properties of the composites by means of elastic modulus, yield stress, impact strength and percentage of strain-to-fracture and evaluation of their effects on both the dispersion and adhesion of talc plates in the matrix through the microscopy. Transmission optical microscopy (TOM) and scanning electron microscopy (SEM) are used to observe the deformation micromechanism and the fracture surface of the composites, respectively.

36 MATERIALS SCIENCE↗

Structural anisotropy and orientation-induced Casimir repulsion in fluids

In this work we theoretically consider the Casimir force between two periodic arrays of nanowires (both in vacuum, and on a substrate separated by a fluid) at separations comparable to the period. Specifically, we compute the dependence of the exact Casimir force between the arrays under both lateral translations and rotations. Although typically the force between such structures is well characterized by the proximity force approximation (PFA), we find that in the present case the microstructure modulates the force in a way qualitatively inconsistent with PFA. We find instead that effective-medium theory, in which the slabs are treated as homogeneous, anisotropic dielectrics, gives a surprisingly accurate picture of the force, down to separations of half the period. This includes a situation for identical, fluid-separated slabs in which the exact force changes sign with the orientation of the wire arrays, whereas PFA predicts attraction. We discuss the possibility of detecting these effects in experiments, concluding that this effect is strong enough to make detection possible in the near future.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The influence of self-assembly behavior of nanoparticles on the dielectric polymer composites

To clearify the influence of the distribution of the conductive nanoparticles on the dielectric properties of the corresponding polymer composites, the microstructure and dielectric character of the composites based on the oleic acid modified ferroferric oxide and polyvinylidene fluoride (PVDF) polymer have been studied experimentally. It is found that these composites exhibit a normal percolative phase transition over the filler content from insulator to conductor, consistent with the classical percolation theory. However, when the percentage of fillers is at a certain value which is below the percolation threshold, these nanoparticles can assemble into a special porous structure in the PVDF matrix, associated with the enhancement of dielectric constant at low frequency. In addition, the controllable dispersion of conducting nanoparticles in a polymer matrix can prevent premature agglomeration at low filling fractions and avoid the appearance of anomalously early percolation. Therefore, the self-assembly behavior of nanoparticles can be beneficial to preparation of the high dielectric constant and low loss composites for the application of electric energy storage.

36 MATERIALS SCIENCE↗

Raman spectroscopic characterization of the core-rim structure in reaction bonded boron carbide ceramics

Raman spectroscopy was used to characterize the microstructure of reaction bonded boron carbide ceramics. Compositional and structural gradation in the silicon-doped boron carbide phase (rim), which develops around the parent boron carbide region (core) due to the reaction between silicon and boron carbide, was evaluated using changes in Raman peak position and intensity. Peak shifting and intensity variation from the core to the rim region was attributed to changes in the boron carbide crystal structure based on experimental Raman observations and ab initio calculations reported in literature. The results were consistent with compositional analysis determined by energy dispersive spectroscopy. The Raman analysis revealed the substitution of silicon atoms first into the linear 3-atom chain, and then into icosahedral units of the boron carbide structure. Thus, micro-Raman spectroscopy provided a non-destructive means of identifying the preferential positions of Si atoms in the boron carbide lattice.

36 MATERIALS SCIENCE↗

Microstructure and corrosion behavior of cast Fe-B alloys dipped into liquid zinc bath

The corrosion behavior of cast Fe-B alloys in a liquid zinc bath was examined. As a result, the as-cast Fe-3.5B alloy displays the best corrosion resistance in all tested specimens owing to its netlike structure of eutectic Fe{sub 2}B against the liquid zinc. XRD and EDS results indicate that the main phases in the corrosion layer are determined to be {delta}, {zeta} and {eta} from the matrix to the zinc zone, respectively. The corrosion process is controlled by the diffusion of zinc atoms and the dissolution mechanism. According to the observations, only three steps occur in the whole dissolution process: the preferential dissolution of {alpha}-Fe, the formation of intermetallic compounds, and the spalling of Fe{sub 2}B caused by cracks that mainly result from the internal stress produced by Fe/Zn phase transformation. The continuous netlike Fe{sub 2}B phase delays the further reaction of Fe/Zn and hinders the diffusion of zinc atoms between the substrate and liquid zinc effectively, improving corrosion resistance of Fe-B alloy in comparison with 1Cr18Ni9Ti stainless steel.

36 MATERIALS SCIENCE↗

Investigation on Tribological Properties of the Pre-oxidized Ti{sub 2}AlN/TiAl Composite

Different oxidation layers on the Ti{sub 2}AlN/TiAl substrate which was fabricated by in situ synthesis were prepared through thermal oxidation process. The microstructure, phase identification and elements distribution of the oxidation layers were analyzed. The tribological performance of pre-oxidized composites against Si{sub 3}N{sub 4} ball at 25 and 600 °C, as well as the effect of pre-oxidation layers on tribological performance was systematically investigated. The results show that, compared to Ti{sub 2}AlN/TiAl, the pre-oxidized composites present more excellent tribological properties, especially the wear resistance at 600 °C. It is a significant finding that, different from severe abrasive wear and plastic deformation of Ti{sub 2}AlN/TiAl, the tribo-films formed by the pre-oxidation layers on the worn surface of pre-oxidized composites weaken abrasive wear and suppress the development of plastic deformation to protect the underlying composite substrate from wear. Moreover, the stable cooperation on the interface between tribo-films and Si{sub 3}N{sub 4} ball results in the relatively steady friction coefficient.

36 MATERIALS SCIENCE↗

Synthesis and Characterization of Ni{sub 1−x}Cu{sub x}Bi{sub 3} Superconductor

In this paper, we characterized the microstructure and superconducting properties of Cu-doped NiBi{sub 3} samples. The polycrystalline Ni{sub 1−x}Cu{sub x}Bi{sub 3} (0 ≤ x ≤ 0.10) samples were prepared using a solid-state reaction method. The crystal structure and unit cell parameters were determined by Rietveld refinement of powder X-ray diffraction. The data showed that the main phase present corresponded to NiBi{sub 3} without dependence on the Cu concentration, but with small quantities of Ni and Bi. The SEM and AFM measurements revealed that the main phase was inhomogeneous at microscopic level, with Bi richer regions in comparison to other regions. However, Raman spectroscopy results did not show significant changes in the spectra with Cu doping and in different regions of the samples. Another finding was that regardless of Cu doping, the superconducting transition temperature was 4.05–4.06 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A comparative structural study of wet and dried ettringite

Two different techniques were used to compare structural characteristics of 'wet' ettringite (stored in the synthesis mother liquid) and 'dried' ettringite (dried to 35% relative humidity over saturated CaCl{sub 2} solution). Lattice parameters and the water content in the channel region of the structure (site occupancy factor of the water molecule not bonded to cations) as well as microstructure parameters (size and strain) were determined from a Rietveld refinement on synchrotron powder diffraction data. Local environment of sulphate anions and of the hydrogen bonding network was characterized by Raman spectroscopy. Both techniques led to the same conclusion: the 'wet' ettringite sample immersed in the mother solution from the synthesis presents similar structural features as ettringite dried to 35% relative humidity. An increase of the a lattice parameter combined with a decrease of the c lattice parameter occurs on drying. The amount of structural water, the point symmetry of sulphate and the hydrogen bond network are unchanged when passing from the wet to the dried ettringite powder. Ettringite does not form a high-hydrate polymorph in equilibrium with alkaline solution, in contrast to the AFm phases that lose water molecules on drying. According to these results we conclude that ettringite precipitated in aqueous solution at the early hydration stages is of the same chemical composition as ettringite present in the hardening concrete.

36 MATERIALS SCIENCE↗