Search NASA⌕ Search

SEARCH · Search NASA

Results for “Microwave Observations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Investigating Convective Gustiness of Winds and Fluxes Using Microwave Remote Sensing

Tropical atmospheric convection is known to be associated with enhanced winds over the oceans that can drive increased rates of mass and energy transfer through turbulent latent and sensible heat fluxes. However, convection and its associated rainfall usually obscures the surface wind signals observed using passive microwave observations. Air-sea flux estimates based on the use of microwave imagers typically mask in areas of rainfall and thus are likely underrepresenting the true turbulent flux transfer. However, both monostatic and bistatic radar scatterometer systems are allowing for more detailed analysis of the convective near-surface environment. While rain still impact C-band scatterometer observations, the L-band observables from the Cyclone Global Navigation Satellite System (CYGNSS) are providing improved observing capabilities in all-weather conditions. In this study, we will present ongoing research to leverage CYGNSS observations in addition to other scatterometer, in situ, and satellite-based precipitation information to provide an improved characterization of surface wind enhancement within tropical oceanic convection. The results will specifically highlight current capabilities and limitations to assess convective wind enhancement and wind gustiness and their relationship to the surface turbulent fluxes of heat and water.

J Brent Roberts↗
NASA NTRS2003

Modelling CLPX IOP3 Radiometric Data by Means of the Dense Media Theory: Preliminary Results for the LSOS Test Site

The capabilities of the Dense Media Radiative Transfer model using the Quasi Crystalline Approximation with Coherent Potential (QCA-CP) to reproduce measured radiometric data were tested using the University of Tokyo Ground Based Microwave Radiometer (GBMR-7) during the third Intensive Observation Period (IOP3) of the NASA Cold-land Processes Field Experiment (CLPX). The data were collected at the Local-Scale Observation Site (LSOS), a 0.8-ha study site consisting of two open meadows separated by trees. Intensive measurements were also made of snow depth and temperature, density, and grain size profiles. A DMRT model is needed to describe radiative transfer in a medium such as snow because the assumption of independent scattering used in classical radiative transfer theory (CRT) is not valid. Validation of the DMRT approach requires a relationship between measured snow grain size and the DMRT approximation of snow grain radius as spherical particles with a mean radius of the log-normal particle-size distribution. This relationship is very important for a better understanding of snow modelling and for practical applications. DMRT simulations were compared with observations of microwave brightnesses at 18.7, 36.5 and 89-GHz (V and H polarizations) collected on February-1 9-25, 2003. Observation angles ranged from 30\deg to 70\deg. Model inputs included measured snow parameters except mean grain size. The average snow temperature, fractional volume and depth were held constant, together with the ice and soil permittivities. The minimum and maximum measured mean grain sizes were used to test the capabilities of the DMRT to reproduce the brightnesses as upper and lower limits. The sensitivity to the largest and smallest measured grain size in the three classes of minimum, medium and maximum observed grain sizes was also investigated. DMRT particle sizes yielding a best-fit to the experimental data for each date were computed. Results show that the measured brightnesses fall within the range of simulated brightnesses using the smallest and largest measured grain size values. The DMRT best-fit radii are comparable to the average radii for the medium observed grain sizes.

Tedesco, Marco↗
NASA NTRS2010

Evidence of Convective Redistribution of Carbon Monoxide in Aura Tropospheric Emission Sounder (TES) and Microwave Limb Sounder (MLS) Observations

Vertical convective transport is a key element of the tropospheric circulation. Convection lofts air from the boundary layer into the free troposphere, allowing surface emissions to travel much further, and altering the rate of chemical processes such as ozone production. This study uses satellite observations to focus on the convective transport of CO from the boundary layer to the mid and upper troposphere. Our hypothesis is that strong convection associated with high rain rate regions leads to a correlation between mid level and upper level CO amounts. We first test this hypothesis using the Global Modeling Initiative (GMI) chemistry and transport model. We find the correlation is robust and increases as the precipitation rate (the strength of convection) increases. We next examine three years of CO profiles from the Tropospheric Emission Sounder (TES) and Microwave Limb Sounder (MLS) instruments aboard EOS Aura. Rain rates are taken from the Tropical Rainfall Measuring Mission (TRMM) 3B-42 multi-satellite product. Again we find a correlation between mid-level and upper tropospheric CO, which increases with rain rate. Our result shows the critical importance of tropical convection in coupling vertical levels of the troposphere in the transport of trace gases. The effect is seen most clearly in strong convective regions such as the Inter-tropical Convergence Zone.

Manyin, Michael↗
NASA NTRS2021

The Global Satellite Precipitation Constellation: Current Status and Future Requirements

To address the need to map precipitation on a global scale a collection of satellites carrying passive microwave (PMW) radiometers has grown over the last 20 years to form a constellation of about 10-12 sensors at any one time. Over the same period, a broad range of science and user communities has become increasingly dependent on the precipitation products provided by these sensors. The constellation presently consists of both conical and cross-track scanning precipitation-capable multi-channel instruments, many of which are beyond their operational and design lifetime but continue to operate through the cooperation of the responsible agencies. The Group on Earth Observations and the Coordinating Group for Meteorological Satellites (CGMS), among other groups, have raised the issue of how a robust, future precipitation constellation should be constructed. The key issues of current and future requirements for the mapping of global precipitation from satellite sensors can be summarised as providing: 1) sufficiently fine spatial resolutions to capture precipitation-scale systems and reduce the beam-filling effects of the observations; 2) a wide channel diversity for each sensor to cover the range of precipitation types, characteristics and intensities observed across the globe; 3) an observation interval that provides temporal sampling commensurate with the variability of precipitation; and 4) precipitation radars and radiometers in low inclination orbit to provide a consistent calibration source, as demonstrated by the first two spaceborne radar/radiometer combinations on the Tropical Rainfall Measuring Mission (TRMM) and Global Precipitation Measurement (GPM) mission Core Observatory (CO). These issues are critical in determining the direction of future constellation requirements, while preserving the continuity of the existing constellation necessary for long-term climate-scale studies.

Precipitation↗
NASA NTRS1990

Observed cloud reflectivities and liquid water paths: An update

The FIRE microwave radiometer observations of liquid water path from San Nicolas Island and simultaneous NOAA AVHRR observations of cloud reflectivity were used to test a relationship between cloud liquid water path and cloud reflectivity that is often used in general circulation climate models (Stephens, 1978). The results of attempts to improve the data analysis which was described at the previous FIRE Science Team Workshop and elsewhere (Coakley and Snider, 1989) are reported. The improvements included the analysis of additional satellite passes over San Nicolas and sensitivity studies to estimate the effects on the observed reflectivities due to: (1) nonzero surface reflectivities beneath the clouds; (2) the anisotropy of the reflected radiances observed by the AVHRR; (3) small scale spatial structure in the liquid water path; and (4) adjustments to the calibration of AVHRR.

Coakley, James A., Jr.↗
NASA NTRS1989

The cosmic microwave background

Recent observational and theoretical investigations of the cosmic microwave background radiation (CMBR) are reviewed. Particular attention is given to spectral distortions and CMBR temperature anisotropies at large, intermediate, and small angular scales. The implications of the observations for inflationary cosmological models with curvature fluctuation are explored, and it is shown that the limits determined for intermediate-scale CMBR anisotropy almost rule out a baryon-dominated cosmology.

Silk, Joseph↗
NASA NTRS2014

Global-Scale Comparison of Passive (SMOS) and Active (ASCAT) Satellite Based Microwave Soil Moisture Retrievals with Soil Moisture Simulations (MERRA-Land)

Global surface soil moisture (SSM) datasets are being produced based on active and passive microwave satellite observations and simulations from land surface models (LSM). This study investigates the consistency of two global satellite-based SSM datasets based on microwave remote sensing observations from the passive Soil Moisture and Ocean Salinity (SMOS;SMOSL3 version 2.5) and the active Advanced Scatterometer (ASCAT; version TUWien- WARP 5.5) with respect to LSM SSM from the MERRA-Land data product. The relationship between the global-scale SSM products was studied during the 2010-2012 period using (1) a time series statistics (considering both original SSM data and anomalies), (2) a space-time analysis using Hovmoller diagrams, and (3) a triple collocation error model. The SMOSL3 and ASCAT retrievals are consistent with the temporal dynamics of modeled SSM (correlation R (is) greater than 0.70 for original SSM) in the transition zones between wet and dry climates, including the Sahel, the Indian subcontinent, the Great Plains of North America, eastern Australia, and southeastern Brazil. Over relatively dense vegetation covers, a better consistency with MERRA-Land was obtained with ASCAT than with SMOSL3. However, it was found that ASCAT retrievals exhibit negative correlation versus MERRA-Land in some arid regions (e.g., the Sahara and the Arabian Peninsula). In terms of anomalies, SMOSL3 better captures the short term SSM variability of the reference dataset (MERRA-Land) than ASCAT over regions with limited radio frequency interference (RFI) effects (e.g., North America, South America, and Australia). The seasonal and latitudinal variations of SSM are relatively similar for the three products, although the MERRALand SSM values are generally higher and their seasonal amplitude is much lower than for SMOSL3 and ASCAT. Both SMOSL3 and ASCAT have relatively comparable triple collocation errors with similar spatial error patterns: (i) lowest errors in arid regions (e.g., Sahara and Arabian Peninsula), due to the very low natural variability of soil moisture in these areas, and Central America, and (ii) highest errors over most of the vegetated regions (e.g., northern Australia, India, central Asia, and South America). However, the ASCAT SSM product is prone to larger random errors in some regions (e.g., north-western Africa, Iran, and southern South Africa). Vegetation density was found to be a key factor to interpret the consistency with MERRA-Land between the two remotely sensed products (SMOSL3 and ASCAT) which provides complementary information on SSM. This study shows that both SMOS and ASCAT have thus a potential for data fusion into long-term data records.

ASCAT↗
NASA NTRS1984

Microwave and X-ray observations of delayed brightenings at sites remote from the primary flare locations

Five examples of solar flares observed with the 17-GHz interferometer at Nobeyama in which a secondary microwave burst occurred at a distance of 100,000 km to 1,000,000 km from the primary flare site are presented. The secondary microwave burst in all five cases had a similar time profile to the primary burst with a delay of 2 to 25 s. The velocity of a triggering agent inferred from this delay and spatial separation is 10,000 km to 100,000 km/s. The intensity of the secondary burst was a factor of 3 to 25 smaller than that of the primary burst in all events except for one case in which it was a factor of 2 larger. The polarization degree of the secondary burst at 17 GHz was 35%, significantly higher than the average value for typical impulsive bursts. Two of the events were accompanied by meterwave type III/V bursts located high in the corona between the primary and secondary sites. For two of the other events, X-ray images of he secondary source were obtained with the hard-X-ray imaging spectrometer on the Solar Maximum Mission. These observations strongly suggest that the distant microwave bursts were produced by electrons with energies of 10 keV to 100 keV which were channeled along a huge loop from the main flare site to the remote location.

Nakajima, H.↗
NASA NTRS1985

Microwave and X-ray observations of delayed brightenings at sites remote from the primary flare locations

Five examples of solar flares observed with the 17-GHz interferometer at Nobeyama in which a secondary microwave burst occurred at a distance of 100,000 km to 1,000,000 km from the primary flare site are presented. The secondary microwave burst in all five cases had a similar time profile to the primary burst with a delay of 2 to 25 s. The velocity of a triggering agent inferred from this delay and spatial separation is 10,000 km to 100,000 km/s. The intensity of the secondary burst was a factor of 3 to 25 smaller than that of the primary burst in all events except for one case in which it was a factor of 2 larger. The polarization degree of the secondary burst at 17 GHz was 35 percent, significantly higher than the average value for typical impulsive bursts. Two of the events were accompanied by meterwave type III/V bursts located high in the corona between the primary and secondary sites. For two of the other events, X-ray images of the secondary source were obtained with the hard-X-ray imaging spectrometer on the Solar Maximum Mission. These observations strongly suggest that the distant microwave bursts were produced by electrons with energies of 10 keV to 100 keV which were channeled along a huge loop from the main flare site to the remote location.

Nakajima, H.↗
NASA NTRS1986

Month-to-month variability of ocean-atmosphere latent heat flux as observed from the Nimbus microwave radiometer

Comparison with in situ measurements shows that the Nimbus/Scanning Multichannel Microwave Radiometer is useful in describing the month-to-month variability of the latent heat flux 'LE' and related parameters during the 1982-1983 El Nino event. The spaceborne measured monthly mean LE was found to be within 30 W/sq m of those derived from ship reports. Absolute accuracy could not be determined, though satellite measurements could extrapolate information on the LE both in space and in time.

Liu, W. Timothy↗
NASA NTRS1989

Observational results using the microwave temperature profiler during the Airborne Antarctic Ozone Experiment

The Microwave Temperature Profiler (MTP) measures profiles of air temperature versus altitude. The altitude coverage is about 5 km at a flight altitude of 20 km (66,000 feet), and the profiles are obtained every 14 s. The MTP instrument is installed on NASA's ER-2 aircraft, which flew 13 missions over Antarctica during the Airborne Antarctic Ozone Experiment. Altitude temperature profiles were used to derive potential temperature cross sections. These cross sections have been useful in detecting atmospheric waves. Many wave encounters have been identified as 'mountain waves'. The mountain waves are found to extend from the lowest altitudes measured to the highest (about 24 km). The southern part of the Palmer Peninsula was found to be associated with mountain waves more than half the time. Altitude temperature profiles were also used to measure the lapse rate along the flight track. Lapse rate versus latitude plots do not show significant changes at the ozone hole boundary.

Gary, Bruce L.↗
NASA NTRS1992

Phased array feed design technology for Large Aperture Microwave Radiometer (LAMR) Earth observations

An assessment of the potential and limitations of phased array antennas in space-based geophysical precision radiometry is described. Mathematical models exhibiting the dependence of system and scene temperatures and system sensitivity on phased array antenna parameters and components such as phase shifters and low noise amplifiers (LNA) are developed. Emphasis is given to minimum noise temperature designs wherein the LNA's are located at the array level, one per element or subarray. Two types of combiners are considered: array lenses (space feeds) and corporate networks. The result of a survey of suitable components and devices is described. The data obtained from that survey are used in conjunction with the mathematical models to yield an assessment of effective array antenna noise temperature for representative geostationary and low Earth orbit systems. Practical methods of calibrating a space-based, phased array radiometer are briefly addressed as well.

Schuman, H. K.↗
NASA NTRS1994

Earth Observing System (EOS)/Advanced Microwave Sounding Unit A (AMSU-A) configuration management plan

This plan describes methods and procedures Aerojet will follow in the implementation of configuration control for each established baseline. The plan is written in response to the GSFC EOS CM Plan 420-02-02, dated January 1990, and also meets he requirements specified in DOD-STD-480, DOD-D 1000B, MIL-STD-483A, and MIL-STD-490B. The plan establishes the configuration management process to be used for the deliverable hardware, software, and firmware of the EOS/AMSU-A during development, design, fabrication, test, and delivery. This revision includes minor updates to reflect Aerojet's CM policies.

Cavanaugh, J.↗
NASA NTRS1994

Earth Observing System (EOS) Advanced Microwave Sounding Unit-A (AMSU-A) Spares Program Plan

This plan specifies the spare components to be provided for the EOS/AMSU-A instrument and the general spares philosophy for their procurement. It also address key components not recommended for spares, as well as the schedule and method for obtaining the spares. The selected spares list was generated based on component criticality, reliability, repairability, and availability. An alternative spares list is also proposed based on more stringent fiscal constraints.

Chapman, Weldon↗