Search NASA⌕ Search

SEARCH · Search NASA

Results for “Mixing layer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Idealized simulations of wind farm interactions with intermittent turbulence in stable boundary layer conditions

Stable atmospheric boundary layer conditions typically correspond to weak turbulence levels, but intermittent periods of elevated turbulence can occur during otherwise quiescent conditions. The interaction between intermittent turbulence and wind turbines is not well understood because of sparse observations, as well as the difficulty in realistically resolving small-scale turbulence during strongly stable conditions with numerical simulations. In this study, an explicit filtering and reconstruction approach for large-eddy simulation (LES) is used to simulate weakly and strongly stable conditions, with surface cooling rates of −0.2 and −2.0 K h −1 , respectively. This approach can sustain resolved background turbulence at relatively coarse grid spacing and stronger stratification compared to conventional closures, permitting more realistic intermittent stable boundary layer (SBL) turbulence. The idealized LES capability of the Weather Research and Forecasting model is employed with turbine rotors parameterized using generalized actuator disks to examine (1) how the presence of turbine wakes affects SBL evolution and (2) the effect of intermittent turbulence on power production and wake recovery. Wakes increase mixing and deepen the SBL, with a stronger effect under strongly stable conditions, primarily because the SBL is shallower and closer to the top of the wind turbine rotor layer. Intermittent turbulence does not have a significant impact on mean power generation and wake recovery because the relevant intermittent turbulent structures in this study only affect the bottom half of the rotor disk. Power production is, however, more variable during periods of elevated turbulence, demonstrating the impact of SBL intermittency. This study uses an idealized configuration, focusing on LES model performance and physical understanding, with the goal of informing future simulations of the conditions observed during the American Wake Experiment.

Energy - Wind↗
DOE OSTI2022

Li x (C 5 H 5 N) y Fe 2– z Se 2 : A Defect-Resilient Expanded-Lattice High-Temperature Superconductor

Two-dimensional iron chalcogenide intercalates display a remarkable correlation of the interlayer spacing with enhancement of the superconducting critical temperature (T c ). In this work, synchrotron X-ray absorption (XAS; at the Fe and Se K-edges) and emission (XES; at the Fe Κβ) spectroscopies allow one to discuss how the important rise of T c (~44 K) in the molecule-intercalated Li x (C 5 H 5 N) y Fe 2-z Se 2 relates to the electronic and local structural changes felt by the inorganic host upon doping (x). XES shows that widely separated layers of edge-sharing FeSe 4 tetrahedra carry low-spin moieties, with a local Fe magnetic moment slightly reduced compared to the parent β-Fe 2-z Se 2 . Pre-edge XAS expresses the progressively reduced mixing of metal 3d-4p states upon lithiation. Doping-mediated local lattice modifications, probed by conventional T c optimization measures (cf. the anion height and FeSe 4 tetrahedra regularity), become less relevant when layers are spaced far away. On the basis of extended X-ray absorption fine structure, such distortions are compensated by a softer Fe network that relates to Fe-site vacancies, alleviating electron-lattice correlations and superconductivity. Density functional theory (DFT) guided modification of the isolated Fe 2-z Se 2 (z, vacant sites) planes, resembling the host layers, identify that Fe-site deficiency occurs at low energy cost, giving rise to stretched Fe sheets, in accordance with experiments. Here, the robust high-T c in Li x (C 5 H 5 N) y Fe 2-z Se 2 , arises from the interplay of electron-donating spacers and the iron selenide layer's tolerance to defect chemistry, a tool to favorably tune its Fermi surface properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Burning conditions and transportation pathways determine biomass-burning aerosol properties in the Ascension Island marine boundary layer

African biomass-burning aerosol (BBA) in the southeast Atlantic Ocean (SEA) marine boundary layer (MBL) is an important contributor to Earth’s radiation budget yet its representation remains poorly constrained in regional and global climate models. Data from the Layered Atlantic Smoke Interactions with Clouds (LASIC) field campaign on Ascension Island (-7.95° N, -14.36° E) detail how fire source regions (burning conditions and fuel type), transport pathways, and longer-term chemical processing affect the chemical, microphysical, and optical properties of the BBA in the remote MBL between June and September of 2017. Ten individual plume events characterize the seasonal evolution of BBA characteristics. Inefficient burning conditions, determined by the mass ratio of refractory black carbon to above-background carbon monoxide (rBC:ΔCO), enhance organic- and sulfate-rich aerosol concentrations in June–July. In contrast, the heart of the burning season exhibited higher rBC:ΔCO values indicative of efficient burning conditions, correlating with more rBC-enriched BBA. Toward the end of the burning season, a mix of burning conditions results in increased variation of the BBA properties. The BBA transit to Ascension Island was predominantly through slow-moving pathways in the MBL and lower free troposphere (FT), facilitating prolonged chemical transformations through heterogeneous and aqueous phase processes. Heterogeneous oxidation can persist for up to 10 days, resulting in a considerable decrease in organic aerosol (OA) mass. OA to rBC mass ratios (OA:rBC) in the MBL between 2 and 5 contrast to higher values of 5 to 15 observed in the nearby FT. Conversely, early-season aqueous-phase processes primarily contributed to aerosol oxidation and some aerosol production, but not appreciable aerosol removal. These two chemical processes yield more light-absorbing BBA in the MBL than in the FT and explain the notably low scattering albedo at 530 nm (SSA 530 ) values (< 0.80) at Ascension Island. This study establishes a robust correlation between SSA 530 and OA:rBC across both MBL and FT, underscoring the dependency of optical properties on chemical composition. These findings highlight how the interplay between chemical composition and atmospheric processing can be improved in global and regional climate models. Questions remain on the mixing of aerosols with different pathway histories, and on what accounts for the doubling of the mass absorption coefficient in the boundary layer.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Interaction mechanism of transition metal phthalocyanines on transition metal nitride supports

Here, we investigated the electronic interactions between transition metal phthalocyanine (TMPc’s) on a refractory transition metal nitride support, specifically copper phthalocyanine (CuPc) on titanium nitride (TiN). X-ray Photoelectron Spectroscopy (XPS) results suggest a presence of a few nanometer native oxide layer on the surface of the TiN nanoparticles, which consists of TiN, TiO 2 , and Titanium oxynitrides (Ti x O y N z ). A TiNCuPc nanocomposite was synthesized via a simple mixing method due to the strong binding between CuPc and TiN confirmed by density functional theory (DFT) calculations. Both XPS data and DFT calculations revealed an electron transfer from TiN substrate to CuPc molecule. The nature of charge transfer is not influenced by the presence of an oxide layer on the surface of TiN. Substantial deviations are however found between photoelectron emission microscopy (PEEM) measured work function for TiN (4.68 eV) and theoretically calculated work function for pristine stoichiometric TiN (2.63 eV). This behavior is attributed to the presence of an oxide layer on the TiN surface. TiNCuPc composite system has a work function value between those of TiN and CuPc. Our studies open up an opportunity to apply a new class of materials based on transition metal phthalocyanine/transition metal nitride composites to catalysis and optoelectronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Probing eddy size and its effective mixing length in stably stratified roughness sublayer flows

Stably stratified roughness sublayer flows are ubiquitous yet remain difficult to represent in models and to interpret using field experiments. Here, continuous high-frequency potential temperature profiles from the forest floor up to 6.5 times the canopy height observed with distributed temperature sensing (DTS) are used to link eddy topology to roughness sublayer stability correction functions and coupling between air layers within and above the canopy. The experiments are conducted at two forest stands classified as hydrodynamically sparse and dense. Near-continuous profiles of eddy sizes (length scales) and effective mixing lengths for heat are derived from the observed profiles using a novel conditional sampling approach. The approach utilizes potential temperature isoline fluctuations from a statically stable background state. The transport of potential temperature by an observed eddy is assumed to be conserved (adiabatic movement) and we assume that irreversible heat exchange between the eddy and the surrounding background occurs along the (vertical) periphery of the eddy. This assumption is analogous to Prandtl's mixing-length concept, where momentum is transported rapidly vertically and then equilibrated with the local mean velocity gradient. A distinct dependence of the derived length scales on background stratification, height above ground, and canopy characteristics emerges from the observed profiles. Implications of these findings for (1) the failure of Monin–Obukhov similarity in the roughness sublayer and (2) above-canopy flow coupling to the forest floor are examined. The findings have practical applications in terms of analysing similar DTS data sets with the proposed approach, modelling roughness sublayer flows, and interpreting nocturnal eddy covariance measurements above tall forested canopies.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

A Semiconducting Two‐Dimensional Polymer as an Organic Electrochemical Transistor Active Layer

Abstract Organic electrochemical transistors (OECTs) are devices with broad potential in bioelectronic sensing, circuits, and neuromorphic hardware. Their unique properties arise from the use of organic mixed ionic/electronic conductors (OMIECs) as the active channel. Typical OMIECs are linear polymers, where defined and controlled microstructure/morphology, and reliable characterization of transport and charging can be elusive. Semiconducting two‐dimensional polymers (2DPs) present a new avenue in OMIEC materials development, enabling electronic transport along with precise control of well‐defined channels ideal for ion transport/intercalation. To this end, a recently reported 2DP, TIIP, is synthesized and patterned at 10 µm resolution as the channel of a transistor. The TIIP films demonstrate textured microstructure and show semiconducting properties with accessible oxidation states. Operating in an aqueous electrolyte, the 2DP‐OECT exhibits a device‐scale hole mobility of 0.05 cm 2 V –1 s –1 and a µ C * figure of merit of 1.75 F cm –1 V –1 s –1 . 2DP OMIECs thus offer new synthetic degrees of freedom to control OECT performance and may enable additional opportunities such as ion selectivity or improved stability through reduced morphological modulation during device operation.

2D-polymer↗
DOE OSTI2023

Sr(Ag 1− x Li x ) 2 Se 2 and [Sr 3 Se 2 ][(Ag 1− x Li x ) 2 Se 2 ] Tunable Direct Band Gap Semiconductors

Abstract Synthesizing solids in molten fluxes enables the rapid diffusion of soluble species at temperatures lower than in solid‐state reactions, leading to crystal formation of kinetically stable compounds. In this study, we demonstrate the effectiveness of mixed hydroxide and halide fluxes in synthesizing complex Sr/Ag/Se in mixed LiOH/LiCl. We have accessed a series of two‐dimensional Sr(Ag 1− x Li x ) 2 Se 2 layered phases. With increased LiOH/LiCl ratio or reaction temperature, Li partially substituted Ag to form solid solutions of Sr(Ag 1− x Li x ) 2 Se 2 with x up to 0.45. In addition, a new type of intergrowth compound [Sr 3 Se 2 ][(Ag 1− x Li x ) 2 Se 2 ] was synthesized upon further reaction of Sr(Ag 1− x Li x ) 2 Se 2 with SrSe. Both Sr(Ag 1− x Li x ) 2 Se 2 and [Sr 3 Se 2 ][(Ag 1− x Li x ) 2 Se 2 ] exhibit a direct band gap, which increases with increasing Li substitution ( x ). Therefore, the band gap of Sr(Ag 1− x Li x ) 2 Se 2 can be precisely tuned via fine‐tuning x that is controlled by only the flux ratio and temperature.

Zhou, Xiuquan↗
DOE OSTI2023

Microstructural Insights into Performance Loss of High-Voltage Spinel Cathodes for Lithium-ion Batteries

Spinel-structured LiNi x Mn 2-x O 4 (LNMO), with low-cost earth-abundant constituents, is a promising high-voltage cathode material for lithium-ion batteries. Even though extensive electrochemical investigations have been conducted on these materials, few studies have explored correlations between their loss in performance and associated changes in microstructure. Here, down to the atomic scale, the structural evolution of these materials is investigated upon the progressive cycling of lithium-ion cells. Transgranular cracking is revealed to be a key feature during cycling; this cracking is initiated at the particle surface and leads to the penetration of electrolytes along the crack path, thereby increasing particle exposure to the electrolyte. The lattice structure on the crack surface shows spatial variances, featuring a top layer of rock-salt, a sublayer of a Mn 3 O 4 -like arrangement, and then a mixed-cation region adjacent to the bulk lattice. The transgranular cracking, along with the emergence of local lattice distortion, becomes more evident with extended cycling. Further, phase transformation at primary particle surfaces and void formation through vacancy condensation is found in the cycled samples. All these features collectively contribute to the performance degradation of the battery cells during electrochemical cycling.

25 ENERGY STORAGE↗
DOE OSTI2020

Radiation response of FeCrAl-coated Zircaloy-4

Coating the surface of Zircaloy-4 light water reactor fuel cladding tube is of considerable interest for enhancing its accident tolerance. In this study, thermal annealing of FeCrAl-coated Zircaloy-4 at 725 °C for 500 h, was used to induce interfacial reactions between Zircaloy-4 and FeCrAl. The interface zones were then irradiated by 3.5 MeV Zr ions at 400 °C, up to 50, 100, 150 peak dpa values. Transmission electron microscopy (TEM) and scanning TEM were used to characterize microstructural and composition changes before and after ion irradiation. Three interfacial phases were identified: FeZr 3 , (Fe,Cr) 2 Zr, and ZrC. The widest intermetallic layer, FeZr3, had large grains. The narrower phases, (Fe,Cr)2Zr and ZrC, contained small grains and were often mixed. The unexpected observation of the ZrC phase was attributed to the presence of very small impurity level concentrations of carbon in the powder material. No void swelling was observed in any of the phases, including the FeCrAl coating and Zircaloy-4 substrate. (Fe,Cr) 2 Zr, however, fully amorphized after irradiation, even at the lowest dpa.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The passivity of low-temperature carburized austenitic stainless steel AISI-316L in a simulated boiling-water-reactor environment

The passive film on low-temperature-carburized AISI-316L austenitic stainless steel was studied in an oxygenated, simulated boiling-water-reactor environment with normal water chemistry. The microstructure was studied using scanning electron microscopy, grazing-incidence X-ray diffractometry, Auger electron spectroscopy, X-ray energy-dispersive spectroscopy, and transmission electron microscopy. For non-surface engineered AISI-316L, three distinct layers were observed after exposure: an outer layer of larger nickel-oxide enriched particles with the spinel structure, an intermediate layer of small Cr-oxide-enriched hematite particles, and a compact inner layer of Cr-enriched oxide also having the spinel structure. Exposure of low-temperature-carburized AISI-316L, in contrast, resulted in only two distinct layers. These layers did not include a compact Cr-rich inner layer. Instead, the innermost layer consisted of an oxide with the spinel structure that was a mixture of Fe, Cr and Ni oxide. The outer layer on the low-temperature-carburized specimen consisted of large loosely stacked particles with the spinel structure of mixed composition. In addition to passive-film characterization, the corrosion rate was studied by monitoring mass loss. Finally, after 500 h of immersion, the mass changes measured were relatively low for all specimens indicating good adhesion and low oxidation rates.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Generic Behavior of Ultrastability and Anisotropic Molecular Packing in Codeposited Organic Semiconductor Glass Mixtures

Vapor-deposited glass mixtures of organic semiconductors commonly serve as active layers in organic electronic devices, whose lifetime and performance are strongly influenced by the stability and structure of these mixed glasses. Here, we study the stability and anisotropic molecular packing of six co-deposited organic semiconductor glass mixtures with 50:50 weight ratio, by differential scanning calorimetry and spectroscopic ellipsometry. We also find that all six binary systems exhibit high kinetic stability and significantly reduced enthalpy relative to the corresponding liquid-cooled glassy mixtures (ultrastable behavior), even for systems where the glass transition temperatures of the components differ by more than 90 K. Furthermore, we demonstrate that the birefringence of a co-deposited glass mixture, a measure of its anisotropic packing, can be predicted from the birefringence of glasses of the two pure components. These results for stability and structure are expected to be applicable to other co-deposited organic semiconductor glass mixtures, so long as the two components mix well in the glass and individually can form ultrastable glasses. Therefore, our findings are significant for designing novel electronic devices with enhanced device lifetime and increased operational efficiency.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Photophysical Properties and Phase Behavior of Ultrawide Photovoltaic Bandgap Cesium–Lead-Based Triple Halide Perovskites

Metal halide perovskite films in the top cell of triple-junction tandems require bandgaps around 2.0 eV to achieve current matching, assuming that the middle absorbing layer is the commonly used FAPbI 3 composition and the bottom cell has a bandgap around 1.1 eV. Unfortunately, mixed organic/inorganic metal halide perovskites that have the necessary Br content to reach a bandgap of 2.0 eV segregate into iodine-rich and bromine-rich phases under illumination, limiting their obtainable voltage. Previous reports have shown improved photostability using either Cs-based inorganic compositions or Cl incorporation on the X-site. Here, we investigate the inorganic triple halide compositional space CsPb­(I 1–x–y Br y Cl x ) 3 where bandgaps near 2.0 eV are expected based on the knowledge that CsPbI2Br has a bandgap of 1.90 eV. Incorporation of Cl occurs readily for x ≤ 0.07–0.10 within perovskites with a Br content of 0.3 ≤ y ≤ 0.42. When x >0.1, X-ray diffraction and photoluminescence (PL) measurements indicate that multiple compositional phases form. We hypothesize that the variable sizes of the three halide ions are not supported within the rigid Cs lattice, resulting in the formation of multiple compositional phases. The photoluminescence quantum yield of the single-phase compositional space–CsPb­(I 1–x–y Br y Cl x ) 3 where x ≤ 0.07was typically 0.001–0.004%, most likely as a result of a high defect density, including mobile iodine species. PL light-soaking measurements of many perovskite compositions with bandgaps in the range of 1.89–2.05 eV demonstrate that phase segregation occurs when initial bandgaps are above 1.95 eV regardless of halide content: indicating further iodide oxidation and corresponding migration under illumination. The conclusion is that further compositional or additive engineering is necessary for the development of inorganic triple halide compositions that accomplish the elusive goal of fabricating high-quality and photostable 2.0 eV films for use in multijunction tandems.

Electrical conductivity↗
DOE OSTI2022

Solvation Thermodynamics of Solutes in Water and Ionic Liquids Using the Multiscale Solvation-Layer Interface Condition Continuum Model

We report molecular assembly processes are generally driven by thermodynamic properties in solutions. Atomistic modeling can be very helpful in designing and understanding complex systems, except that bulk solvent is very inefficient to treat explicitly as discrete molecules. The SLIC/CDC multiscale model combines continuum solvent electrostatics based on the solvent layer interface condition (SLIC) with statistical thermodynamic models for hydrogen bonding and nonpolar modes: cavity formation, dispersion interactions, combinatorial mixing (CDC). The SLIC/CDC model predicts Gibbs energies of solvation for a database of 500 solutes in water with average accuracy better than 1 kcal/mol both for experimental measurements and for explicit-solvent molecular dynamics simulations. The separate SLIC/CDC energy mode values agree quantitatively with those computed from explicit-solvent molecular dynamics. The SLIC/SASA multiscale model combines the SLIC continuum electrostatic model with the solvent accessible surface area (SASA) nonpolar energy mode. The SLIC/SASA model predicts Gibbs energies of solvation with better than 1.4 kcal/mol average accuracy in aqueous systems and better than 1.6 kcal/mol average accuracy in ionic liquids. Both models predict solvation entropies, and are the first implicit-solvation models capable of predicting solvation heat capacities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Topanga: A kinetic ion plasma code for large-scale ionospheric simulations on magnetohydrodynamic timescales

Topanga is a kinetic ion code developed for simulating large-scale plasma phenomena in the Earth's ionosphere on magnetohydrodynamic timescales. It is a domain-decomposed parallel code that runs on high-performance computing platforms. Features of Topanga include spherical geometry for simplified boundary conditions and computational efficiency; a hybrid plasma model with inertia-less fluid electrons, kinetic ions, and an electric field specified via an Ohm's law; a Maxwell-FDTD (finite difference time domain) plasma model which retains the displacement current in Maxwell's equations and models electron currents in the ionosphere with a tensor conductivity; sponge-layer boundary conditions for absorption of electromagnetic and plasma waves incident on the domain boundaries; and a novel mixed-implicit algorithm for evolving the EM fields inside the Maxwell-FDTD region that is stable over many orders of magnitude in the electron–ion collision frequency. We verify the numerical methods used in Topanga on a pair of test problems. The first test involves modeling a three-dimensional collisionless shock using the hybrid set of equations. The second test involves modeling a spherical TEM mode in vacuum using the Maxwell-FDTD set of equations. Finally, we demonstrate how using the combined set of hybrid and Maxwell-FDTD equations to model the Starfish Prime high-altitude nuclear test recovers a “missing” EM signal on the ground that is not present when using only the hybrid set of equations. The magnitude of this signal in the simulation containing the Maxwell-FDTD region agrees well with the E3a portion of the magnetohydrodynamic electromagnetic pulse from Starfish Prime.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Direct ink write multi-material printing of PDMS-BTO composites with MWCNT electrodes for flexible force sensors

Here, with recent advances of additive manufacturing technology, direct ink write (DIW) printing has allowed to incorporate multi-material printing of various materials with freedom of design and complex geometric shapes to complete functional sensors in a one-step fabrication. This paper introduces the use of DIW 3D printing of polydimethylsiloxane (PDMS) with barium titanate (BTO) filler as stretchable composites with tunable piezoelectric properties that can be used for force sensors applications. To improve the bonding between stretchable piezoelectric composites and electrodes, multi-walled carbon nanotubes was included in the fabrication of electrodes at a fixed ratio of 11 wt. %. The alignment of the BTO dipoles was achieved through corona poling method, which applies an electric charge on the surface layer of the functional material, aligning the dipoles in the desired direction and thus gaining the piezoelectricity. Different BTO mixing ratios (10–50 wt. %) were evaluated in order to obtain tunable piezoelectric properties and compare the sensitivity with respect their elastic properties. Tensile testing and piezoelectric testing were carried out to characterize mechanical and piezoelectric properties. Results showed that fabricated PDMS with 50 wt. % BTO gave the highest piezoelectric coefficient (d 33 ) of 11.5 pC N -1 and with an output voltage of 385 mV under compression loading of >200 lbF. This demonstrates feasibility of using multi-material DIW printing to fabricate piezoelectric force sensors with integrated electrodes in one-step without compromising the flexibility of the material.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Time-resolved cryogenic electron tomography for the study of transient cellular processes

Cryogenic electron tomography (cryo-ET) is the highest resolution imaging technique applicable to the life sciences, enabling sub-nanometer visualization of specimens preserved in their near native states. The rapid plunge freezing process used to prepare samples lends itself to time-resolved studies, which researchers have pursued for in vitro samples for decades. Here, we focus on developing a freezing apparatus for time-resolved studies in situ. The device mixes cellular samples with solution-phase stimulants before spraying them directly onto an electron microscopy grid that is transiting into cryogenic liquid ethane. By varying the flow rates of cell and stimulant solutions within the device, we can control the reaction time from tens of milliseconds to over a second prior to freezing. In a proof-of-principle demonstration, the freezing method is applied to a model bacterium, Caulobacter crescentus, mixed with an acidic buffer. Through cryo-ET we resolved structural changes throughout the cell, including surface-layer protein dissolution, outer membrane deformation, and cytosolic rearrangement, all within 1.5 seconds of reaction time. This new approach, Time-Resolved cryo-ET (TR-cryo-ET), enhances the capabilities of cryo-ET by incorporating a sub-second temporal axis and enables the visualization of induced structural changes at the molecular, organelle, or cellular level.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Valence transition and termination-dependent surface states in the topological Kondo semimetal YbPtBi

Here, the Yb-terminated and Bi-terminated (111) surface electronic structure of topological Kondo semimetal YbPtBi is investigated using both density-functional-theory (DFT) -based calculations and angle-resolved photoemission spectroscopy (ARPES). The cleavage plane is found to be between Yb-layers and Bi-layers in both experiment and theory, and the broken inversion symmetry ensures the Yb-terminated surface does not mix with the Bi-terminated surface. The ARPES results at the Bi-terminated surface are similar to those reported for YPtBi or LuPtBi, and they can be well explained using DFT calculations assuming trivalent Yb atoms. In contrast, at the Yb-terminated surface, a trivalent to divalent transition and reduced hybridization with conduction electrons for the topmost Yb atoms are observed, as a result of reduced bonding with Bi-atoms. In addition, the Fermi arc features induced by the triply degenerate-points, which are missing at the Bi-terminated surface, can be identified at the Yb-terminated surface. Our study demonstrates unambiguously the reconstruction of surface electronic structure due to the valence transition of the lanthanide element in a Kondo lattice system.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Carbon Corrosion in Polymer Electrolyte Fuel Cells: A Complex Interplay between Morphological Changes and Electrochemical Performance

Due to the high gravimetric energy density of hydrogen, the focus of implementation of polymer electrolyte fuel cells (PEFCs) has shifted from light duty passenger vehicles to heavy duty vehicles such as buses, trucks, locomotives and marine vessels. A mechanistic understanding of degradation is therefore necessary to improve durability and efficiency. During start-up and shut-down (SUSD) of PEFC systems, the catalyst (Pt nanoparticles embedded on carbon support) undergoes local potentials ~ 1 - 1.5 V caused by a combination of fuel (H 2 ) starvation, mixed fuel region and cell reversal. This leads to a series of degradation phenomenon including reduction in cathode catalyst layer (cCL) thickness and porosity, loss in electrochemical surface area (ECSA), ionomer degradation and loss in electrical contact, therefore resulting in severe performance loss. The convoluted relationship between these individual degradation mechanisms, their chronology and their effects on electrochemical performance are yet unresolved. Here, the complex interplay between morphological changes due to carbon corrosion and its effects on the electrochemical performance were analyzed using a combination of detailed electrochemical characterization, spectroscopy, and electron microscopy techniques.

25 ENERGY STORAGE↗