Search NASA⌕ Search

SEARCH · Search NASA

Results for “Model selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Spread of an introduced parasite across the Hawaiian archipelago independent of its introduced host

1. Co-introductions of non-native parasites with non-native hosts can be a major driver of disease emergence in native species, but the conditions that promote the establishment and spread of nonnative parasites remain poorly understood. Here, we characterise the infection of a native host species by a non-native parasite relative to the distribution and density of the original non-native host species and a suite of organismal and environmental factors that have been associated with parasitism, but not commonly considered within a single system. 2. We examined the native Hawaiian goby Awaous stamineus across 23 catchments on five islands for infection by the non-native nematode parasite Camallanus cotti . We used model selection to test whether parasite infection was associated with the genetic diversity, size and population density of native hosts, the distribution and density of non-native hosts, land use and water quality. 3. We found that the distribution of non-native C. cotti parasites has become decoupled from the non-native hosts that were primary vectors of introduction to the Hawaiian Islands. Although no single intrinsic or extrinsic factor was identified that best explains parasitism of A. stamineus by C. cotti , native host size, population density and water quality were consistently identified as influencing parasite intensity and prevalence. 4. The introduction of non-native species can indirectly influence native species through infection of co-introduced parasites. Here, we show that the effects of enemy addition can extend beyond the range of non-native hosts through the independent spread of non-native parasites. This suggests that control of non-native hosts is not sufficient to halt the spread of introduced parasites. Furthermore, designing importation regulations to prevent host parasite co-introductions can promote native species conservation, even in remote areas that may not seem susceptible to human influence.

59 BASIC BIOLOGICAL SCIENCES↗

Rapid Reflective Facet Characterization Using Fringe Reflection Techniques

Reflective mirror facets for concentrating solar power (CSP) systems have stringent requirements on the surface slope accuracy in order to provide adequate system performance. This paper presents a tool that can fully characterize facets quickly enough for 100% inspection on a production line. A facet for a CSP system, specifically a dish concentrator has a parabolic design shape. This shape will concentrate near-parallel rays from the sun to a point (or a line for trough systems). Deviations of surface slope from the design shape impact the performance of the system, either losing power that misses the target or increasing peak fluxes to undesirable levels. During development or production, accurate knowledge of facet defects can lead to improvements to lower cost or improve performance. The reported characterization system, SOFAST (Sandia Optical Fringe Analysis Slope Tool), has a computer-connected camera that images the reflective surface, which is positioned so that it reflects an active target, such as an LCD screen, to the camera. A series of fringe patterns are displayed on the screen while images are captured. Using the captured information, the reflected target location of each pixel of mirror viewed can be determined, and thus through a mathematical transformation, a surface normal map can be developed. This is then fitted to the selected model equation, and the errors from design are characterized. While similar approaches have been explored, several key developments are presented here. The combination of the display, capture, and data reduction in one system allows rapid characterization. An “electronic boresight” approach is utilized to accommodate physical equipment positioning deviations, making the system insensitive to setup errors. Up to 1.5×10 6 points are characterized on each facet. Finally, while prior automotive industry commercial systems resolve the data to shape determination, SOFAST concentrates on slope characterization and reporting, which is tailored to solar applications. SOFAST can be used for facet analysis during development. However, the real payoff is in production, where complete analysis is performed in about 10s. With optimized coding, this could be further reduced.

14 SOLAR ENERGY↗

Comparison of Radiation Models for a Turbulent Piloted Methane/Air Jet Flame: A Frozen-Field Study

Numerical modeling of radiative transfer in nongray reacting media is a challenging problem in computational science and engineering. The choice of radiation models is important for accurate and efficient high-fidelity combustion simulations. Different applications usually involve different degrees of complexity, so there is yet no consensus in the community. In this paper, the performance of different radiative transfer equation (RTE) solvers and spectral models for a turbulent piloted methane/air jet flame are studied. The flame is scaled from the Sandia Flame D with a Reynolds number of 22,400. Three classes of RTE solvers, namely the discrete ordinates method, spherical harmonics method, and Monte Carlo method, are examined. The spectral models include the Planck-mean model, the full-spectrum k-distribution (FSK) method, and the line-by-line (LBL) calculation. The performances of different radiation models in terms of accuracy and computational cost are benchmarked. The results have shown that both RTE solvers and spectral models are critical in the prediction of radiative heat source terms for this jet flame. The trade-offs between the accuracy, the computational cost, and the implementation difficulty are discussed in detail. The results can be used as a reference for radiation model selection in combustor simulations.

David, Chloe↗

Growth of FePt encapsulated carbon nanotubes by thermal chemical vapor deposition

FePt encapsulated carbon nanotubes (CNTs) were grown by thermal chemical vapor deposition using an Fe/Pt bilayer catalyst. The CNTs were grown according to the base growth model. Selected area electron diffraction results revealed that the encapsulated particles were A1-FePt, L1{sub 0}-FePt, and Fe{sub 3}PtC. The crystal structures of particles found at the root parts of CNTs were not able to be identified, however. The layered structure of catalytic films seemed to be responsible for the difference in Pt content between particles found at tip and root parts of CNTs. Approximately 60% of CNTs grown at 800 °C had particles at their tip parts, compared to only 30% when the growth temperature was 700 °C, indicating that higher process temperatures promote particle encapsulation in CNTs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Properties of Optical Ceramics CO1 and CO2 upon Modification of Their Surface by Carbon Nanotubes

The results of a study of the modification of the properties of optical inorganic materials (optical ceramics CO1 (MgF{sub 2}) and CO2 (ZnS)) are presented. It is found that the main characteristics of the studied materials with a surface modified by carbon nanotubes significantly changes when the laser-oriented deposition method is applied. Main features of the carbon nanotubes caused by its developed surface, the strength of C–C bonds, and low value of refraction index are taken into consideration. Analytical, quantum-chemical and experimental results of studies of changes in the spectral and mechanical parameters, as well as the wetting angle of the selected model inorganic matrices, are given.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A Variational Inference Approach to Inverse Problems with Gamma Hyperpriors

Hierarchical models with gamma hyperpriors provide a flexible, sparse-promoting framework to bridge L 1 and L 2 regularizations in Bayesian formulations to inverse problems. Despite the Bayesian motivation for these models, existing methodologies are limited to maximum a posteriori estimation. The potential to perform uncertainty quantification has not yet been realized. This paper introduces a variational iterative alternating scheme for hierarchical inverse problems with gamma hyperpriors. The proposed variational inference approach yields accurate reconstruction, provides meaningful uncertainty quantification, and is easy to implement. In addition, it lends itself naturally to conduct model selection for the choice of hyperparameters. Here, we illustrate the performance of our methodology in several computed examples, including a deconvolution problem and sparse identification of dynamical systems from time series data.

Bayesian shrinkage↗

Optimizing deep learning hyper-parameters through an evolutionary algorithm. In: MLHPC '15 Proceedings of the Workshop on Machine Learning in High-Performance Computing Environments, Article No. 4

There has been a recent surge of success in utilizing Deep Learning (DL) in imaging and speech applications for its relatively automatic feature generation and, in particular for convolutional neural networks (CNNs), high accuracy classification abilities. While these models learn their parameters through data-driven methods, model selection (as architecture construction) through hyper-parameter choices remains a tedious and highly intuition driven task. To address this, Multi-node Evolutionary Neural Networks for Deep Learning (MENNDL) is proposed as a method for automating network selection on computational clusters through hyper-parameter optimization performed via genetic algorithms.

Young, Steven R.↗

SISSO (Sure-independence-screening sparsifying-operator regressor)

Implementation of the SISSO regression algorithm in MATLAB. The SISSO regression algorithm iteratively selects model features from candidates, converging even when the number of possible features is much greater than the number of available data points. Includes a test script that validates the algorithm by replicating the results using data and procedure from https://analytics-toolkit.nomad-coe.eu/hub/user-redirect/notebooks/tutorials/compressed_sensing.ipynb. Python code from the SISSO regressor in 'sisso.py', from the link above, was used as the basis for developing the MATLAB implementation. The SISSO regression algorithm is detailed by the original authors in R. Ouyang, S. Curtarolo, E. Ahmetcik et al., Phys. Rev. Mater. 2, 083802 (2018), R. Ouyang, E. Ahmetcik, C. Carbogno, M. Scheffler, and L. M. Ghiringhelli, J. Phys.: Mater. 2, 024002 (2019).

Gasper, Paul↗

Metal additive manufacturing simulation across length, time, and computing scales

Metal additive manufacturing (AM) offers a unique opportunity for production of advanced materials and complex geometries. However, variability in microstructure and properties challenges conventional approaches to design, process optimization, qualification, and materials selection. Modeling and simulation can improve understanding of AM processing and materials, but also poses major challenges for existing computational methods. Simultaneously, modern scientific computing hardware has become increasingly complex, most notably with the adoption of hybrid architectures such as Graphical Processing Units (GPUs). If appropriately utilized, emerging computational capabilities provide an opportunity to reveal new insight into AM processing and the resulting material structure and properties. In this review we describe the computational AM landscape, identify critical gaps, and highlight opportunities to impact the development and application of AM. First, the requirements and challenges of representative AM problem statements will be defined. Here, these problems range from scientific studies to industrial applications and are designed to capture the breadth of challenges facing the AM community. Next, the current state of AM modeling and simulation is evaluated, broken down by enabling hardware and software, process simulation, microstructure simulation, and property simulation. Each section describes the diversity of simulation approaches and associated trade-offs in physical fidelity and computational expense. Each area is then assessed based on their suitability and readiness for current and developing computational architectures. Lastly, the greatest opportunities for future research and application are highlighted, including gaps in modeling capabilities, opportunities for near-term application, and key scientific challenges.

additive manufacturing↗

Evolutionary Dynamics of West Nile Virus in the United States, 1999–2011: Phylogeny, Selection Pressure and Evolutionary Time-Scale Analysis

West Nile virus (WNV), an arbovirus maintained in a bird-mosquito enzootic cycle, can infect other vertebrates including humans. WNV was first reported in the US in 1999 where, to date, three genotypes belonging to WNV lineage I have been described (NY99, WN02, SW/WN03). We report here the WNV sequences obtained from two birds, one mosquito, and 29 selected human samples acquired during the US epidemics from 2006–2011 and our examination of the evolutionary dynamics in the open-reading frame of WNV isolates reported from 1999–2011. Maximum-likelihood and Bayesian methods were used to perform the phylogenetic analyses and selection pressure analyses were conducted with the HyPhy package. Phylogenetic analysis identified human WNV isolates within the main WNV genotypes that have circulated in the US. Within genotype SW/WN03, we have identified a cluster with strains derived from blood donors and birds from Idaho and North Dakota collected during 2006–2007, termed here MW/WN06. Using different codon-based and branch-site selection models, we detected a number of codons subjected to positive pressure in WNV genes. The mean nucleotide substitution rate for WNV isolates obtained from humans was calculated to be 5.0661024 substitutions/site/year (s/s/y). The Bayesian skyline plot shows that after a period of high genetic variability following the introduction of WNV into the US, the WNV population appears to have reached genetic stability. The establishment of WNV in the US represents a unique opportunity to understand how an arbovirus adapts and evolves in a naive environment. We describe a novel, well-supported cluster of WNV formed by strains collected from humans and birds from Idaho and North Dakota. Adequate genetic surveillance is essential to public health since new mutants could potentially affect viral pathogenesis, decrease performance of diagnostic assays, and negatively impact the efficacy of vaccines and the development of specific therapies.

59 BASIC BIOLOGICAL SCIENCES↗

Genetic Variability of West Nile Virus in U.S. Blood Donors from the 2012 Epidemic Season

West Nile virus (WNV) is an arbovirus maintained in nature in a bird-mosquito enzootic cycle which can also infect other vertebrates including humans. WNV is now endemic in the United States (U.S.), causing yearly outbreaks that have resulted in an estimated total of 4–5 million human infections. Over 41,700 cases of West Nile disease, including 18,810 neuroinvasive cases and 1,765 deaths, were reported to the CDC between 1999 and 2014. In 2012, the second largest West Nile outbreak in the U.S. was reported, which caused 5,674 cases and 286 deaths. WNV continues to evolve, and three major WNV lineage I genotypes (NY99, WN02, and SW/WN03) have been described in the U.S. since introduction of the virus in 1999. We report here the WNV sequences obtained from 19 human samples acquired during the 2012 U.S. outbreak and our examination of the evolutionary dynamics in WNV isolates sequenced from 1999–2012. Maximum-likelihood and Bayesian methods were used to perform the phylogenetic analyses. Selection pressure analyses were performed with the HyPhy package using the Datamonkey web-server. Using different codon-based and branch-site selection models, we detected a number of codons subjected to positive pressure in WNV genes. Thirteen of the 19 completely sequenced isolates from 10 U.S. states were genetically similar, sharing up to 55 nucleotide mutations and 4 amino acid substitutions when compared with the prototype isolate WN-NY99. Altogether, these analyses showed that following a brief contraction in 2008–2009, WNV genetic divergence in the U.S. continued to increase in 2012, and that closely related variants were found across a broad geographic range of the U.S., coincident with the second-largest WNV outbreak in U.S. history.

59 BASIC BIOLOGICAL SCIENCES↗

Steptoe Valley NV Data Compilation: Understanding a Stratigraphic Hydrothermal Resource through Geophysical Imaging

Sandia National Laboratories partnered with a multi-disciplinary group of subject matter experts to evaluate a stratigraphic geothermal resource in Steptoe Valley, Nevada using both established and novel geophysical imaging techniques. Provided here are a compilation of newly acquired data over the area and select modeling efforts. This encompasses a 3D geological model (inclusive of full Leapfrog files, Leapfrog viewer files, and XYZ data for faults and stratigraphy) with embedded geophysical modeling, controlled-source electromagnetic (CSEM) and magnetotelluric (MT) data packages, aqueous spring geochemistry data, seismic reflection interpretations, and a gravity data package. The stratigraphic reservoir in Steptoe Valley was previously discovered during oil and gas exploration. Subsequent studies, such as the Nevada Play Fairway Analysis, added data which further highlighted potential resource targets in the basin. Geophysical surveys, complimented with refined geologic mapping and geochemical sampling, were deployed to further characterize the resource. The resulting 3D geologic interpretation, conceptual model refinements, and reservoir simulations suggest that a power-capable reservoir is economically accessible in the Paleozoic carbonates of the deep/central basin. Additional geophysical characterization and exploration drilling efforts are recommended to calibrate interpretation and determine where/how to potentially develop the Steptoe resource. The geophysical tools, interpretations, lessons learned, and publicly available data generated by this study establish an exploration methodology to inform decisions for successful development of stratigraphic reservoirs.

15 GEOTHERMAL ENERGY↗

Microscale Metabolic, Redox and Abiotic Reactions in Hanford 300 Area Subsurface Sediments

The Hanford 300 Area is a unique site due to periodic hydrologic influence of river water resulting in changes in groundwater elevation and flow direction. This area is also highly subject to uranium remobilization, the source of which is currently believed to be the region at the base of the vadose zone that is subject to period saturation due to the changes in the water levels in the Columbia River. We found that microbial processes and redox and abiotic reactions which operate at the microscale were critical to understanding factors controlling the macroscopic fate and transport of contaminants in the subsurface. The combined laboratory and field research showed how microscale conditions control uranium mobility and how biotic, abiotic and redox reactions relate to each other. Our findings extended the current knowledge to examine U(VI) reduction and immobilization using natural 300 Area communities as well as selected model organisms on redox-sensitive and redox-insensitive minerals. Using innovative techniques developed specifically to probe biogeochemical processes at the microscale, our research expanded our current understanding of the roles played by mineral surfaces, bacterial competition, and local biotic, abiotic and redox reaction rates on the reduction and immobilization of uranium.

59 BASIC BIOLOGICAL SCIENCES↗

Expectation-maximization algorithms for learning a finite mixture of univariate survival time distributions from partially specified class values

Heterogeneity exists on a data set when samples from di erent classes are merged into the data set. Finite mixture models can be used to represent a survival time distribution on heterogeneous patient group by the proportions of each class and by the survival time distribution within each class as well. The heterogeneous data set cannot be explicitly decomposed to homogeneous subgroups unless all the samples are precisely labeled by their origin classes; such impossibility of decomposition is a barrier to overcome for estimating nite mixture models. The expectation-maximization (EM) algorithm has been used to obtain maximum likelihood estimates of nite mixture models by soft-decomposition of heterogeneous samples without labels for a subset or the entire set of data. In medical surveillance databases we can find partially labeled data, that is, while not completely unlabeled there is only imprecise information about class values. In this study we propose new EM algorithms that take advantages of using such partial labels, and thus incorporate more information than traditional EM algorithms. We particularly propose four variants of the EM algorithm named EM-OCML, EM-PCML, EM-HCML and EM-CPCML, each of which assumes a specific mechanism of missing class values. We conducted a simulation study on exponential survival trees with five classes and showed that the advantages of incorporating substantial amount of partially labeled data can be highly signi cant. We also showed model selection based on AIC values fairly works to select the best proposed algorithm on each specific data set. A case study on a real-world data set of gastric cancer provided by Surveillance, Epidemiology and End Results (SEER) program showed a superiority of EM-CPCML to not only the other proposed EM algorithms but also conventional supervised, unsupervised and semi-supervised learning algorithms.

97 MATHEMATICS AND COMPUTING↗

Assessment of Brine Management for Geologic Carbon Sequestration

Geologic carbon sequestration (GCS) is the injection of carbon dioxide (CO 2 ), typically captured from stationary emission sources, into deep geologic formations to prevent its entry into the atmosphere. Active pilot facilities run by regional United States (US) carbon sequestration partnerships inject on the order of one million metric tonnes (mt) CO 2 annually while the US electric power sector emits over 2000 million mt-CO 2 annually. GCS is likely to play an increasing role in US carbon mitigation initiatives, but scaling up GCS poses several challenges. Injecting CO 2 into sedimentary basins raises fluid pressure in the pore space, which is typically already occupied by naturally occurring, or native, brine. The resulting elevated pore pressures increase the likelihood of induced seismicity, of brine or CO 2 escaping into potable groundwater resources, and of CO 2 escaping into the atmosphere. Brine extraction is one method for pressure management, in which brine in the injection formation is brought to the surface through extraction wells. Removal of the brine makes room for the CO 2 and decreases pressurization. Although the technology required for brine extraction is mature, this form of pressure management will only be applicable if there are cost-­effective and sustainable methods of disposing of the extracted brine. Brine extraction, treatment, and disposal may increase the already substantial capital, energy, and water demands of Carbon dioxide Capture and Sequestration (CCS). But, regionally specific brine management strategies may be able to treat the extracted water as a source of revenue, energy, and water to subsidize CCS costs, while minimizing environmental impacts. By this approach, value from the extracted water would be recovered before disposing of any resulting byproducts. Until a price is placed on carbon, we expect that utilities and other CO 2 sources will be reluctant to invest in capital intensive, high risk GCS projects; early technical, economic, and environmental assessments of brine management are extremely valuable for determining the potential role of GCS in the US. We performed a first order feasibility and economic assessment, at three different locations in the US, of twelve GCS extracted-­water management options, including: geothermal energy extraction, desalination, salt and mineral harvesting, rare-­earth element harvesting, aquaculture, algae biodiesel production, road de-­icing, enhanced geothermal system (EGS) recharge, underground reinjection, landfill disposal, ocean disposal, and evaporation pond disposal. Three saline aquifers from different regions of the US were selected as hypothetical GCS project sites to encompass variation in parameters that are relevant to the feasibility and economics of brine disposal. The three aquifers are the southern Mt. Simon Sandstone Formation in the Illinois Basin, IL; the Vedder Formation in the southern San Joaquin Basin, CA; and the Jasper Interval in the eastern Texas Gulf Basin, TX. These aquifers are candidates for GCS due to their physical characteristics and their close proximity to large CO 2 emission sources. Feasibility and impacts were calculated using one mt-­CO 2 injected as the functional unit of brine management. Scenarios were performed for typical 1000MW coal-­fired power plants (CFPP) that incurred an assumed 24 percent carbon capture energy penalty (EP), injected 90 percent of CO 2 emissions (~9 million mt-­ CO 2 injected annually), and treated extracted water onsite. Net present value (NPV), land requirements, laws and regulations, and technological limits were determined for each stage of disposal, and used to estimate feasibility. The boundary of the assessment began once extracted water was brought to the surface, and ended once the water evaporated, was injected underground, or was discharged into surface water bodies. Results of the assessment were generated, stored, and analyzed using Microsoft Excel spreadsheets and ESRI Geographical Information System (GIS) maps. Conclusions about the relative benefits and impacts of alternative brine-­management strategies were highly sensitive to local climate and weather, and aquifer water chemistry. The NPV of certain scenarios ranged from -­$50/mt-­CO 2 (a cost) to +$10/mt-­CO 2 (revenue). The land footprint of the scenarios in this study ranged from <1 km 2 to 100 km 2 . Brine extraction as a pressure management tool for GCS has potential for improving the economics and for minimizing the environmental impacts of CCS. In order to maximize this potential, careful analysis of each saline aquifer and region must be conducted to determine a regionally appropriate brine use sequence (BUS) at the time of site selection. Models that use GIS will be essential tools in determining such sequences for individual CFPP. Future studies that perform risk and life cycle assessments (LCA) of BUS scenarios, incorporate additional impact metrics into the BUS model, and enhance the temporal sensitivity of the model would improve the robustness of this regional assessment method.

54 ENVIRONMENTAL SCIENCES↗

Evaluating Moving Target Defense with PLADD

This project evaluates the effectiveness of moving target defense (MTD) techniques using a new game we have designed, called PLADD, inspired by the game FlipIt. PLADD extends FlipIt by incorporating what we believe are key MTD concepts. We have analyzed PLADD and proven the existence of a defender strategy that pushes a rational attacker out of the game, demonstrated how limited the strategies available to an attacker are in PLADD, and derived analytic expressions for the expected utility of the game’s players in multiple game variants. We have created an algorithm for finding a defender’s optimal PLADD strategy. We show that in the special case of achieving deterrence in PLADD, MTD is not always cost effective and that its optimal deployment may shift abruptly from not using MTD at all to using it as aggressively as possible. We believe our effort provides basic, fundamental insights into the use of MTD, but conclude that a truly practical analysis requires model selection and calibration based on real scenarios and empirical data. We propose several avenues for further inquiry, including (1) agents with adaptive capabilities more reflective of real world adversaries, (2) the presence of multiple, heterogeneous adversaries, (3) computational game theory-based approaches such as coevolution to allow scaling to the real world beyond the limitations of analytical analysis and classical game theory, (4) mapping the game to real-world scenarios, (5) taking player risk into account when designing a strategy (in addition to expected payoff), (6) improving our understanding of the dynamic nature of MTD-inspired games by using a martingale representation, defensive forecasting, and techniques from signal processing, and (7) using adversarial games to develop inherently resilient cyber systems.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Bayesian Hierarchical Models for Parameter Inference with Missing Data: Supernova Cosmology Case Study [Slides]

Large scale astronomical surveys are going wider and deeper than ever before. However, astronomers, cosmologists and theorists continue to face the perennial issue that their data sets are often incomplete in magnitude space and must be carefully treated in order to avoid Malmquist bias, especially in the field of supernova cosmology. Historically, cosmological parameter inference in supernova cosmology was done using χ2 methodology; however, recent years have seen a rise in the use of Bayesian Hierarchical Models. In this presentation we develop a Bayesian Hierarchical methodology to account for magnitude limited surveys and present a specific application to cosmological parameter inference and model selection in supernova cosmology.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗