Search NASA⌕ Search

SEARCH · Search NASA

Results for “Models, Statistical”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

International challenge to predict the impact of radioxenon releases from medical isotope production on a comprehensive nuclear test ban treaty sampling station

Abstract The International Monitoring System (IMS) is part of the verification regime for the Comprehensive Nuclear-Test-Ban-Treaty Organization (CTBTO). At entry-into-force, half of the 80 radionuclide stations will be able to measure concentrations of several radioactive xenon isotopes produced in nuclear explosions, and then the full network may be populated with xenon monitoring afterward (Bowyer et al., 2013). Fission-based production of 99Mo for medical purposes also releases radioxenon isotopes to the atmosphere (Saey, 2009). One of the ways to mitigate the effect of emissions from medical isotope production is the use of stack monitoring data, if it were available, so that the effect of radioactive xenon emissions could be subtracted from the effect from a presumed nuclear explosion, when detected at an IMS station location. To date, no studies have addressed the impacts the time resolution or data accuracy of stack monitoring data have on predicted concentrations at an IMS station location. Recently, participants from seven nations used atmospheric transport modeling to predict the time-history of 133Xe concentration measurements at an IMS station in Germany using stack monitoring data from a medical isotope production facility in Belgium. Participants received only stack monitoring data and used the atmospheric transport model and meteorological data of their choice. Some of the models predicted the highest measured concentrations quite well (a high composite statistical model comparison rank or a small mean square error with the measured values). The results suggest release data on a 15 min time spacing is best. The model comparison rank and ensemble analysis suggests that combining multiple models may provide more accurate predicted concentrations than any single model. Further research is needed to identify optimal methods for selecting ensemble members and those methods may depend on the specific transport problem. None of the submissions based only on the stack monitoring data predicted the small measured concentrations very well. The one submission that best predicted small concentrations also included releases from nuclear power plants. Modeling of sources by other nuclear facilities with smaller releases than medical isotope production facilities may be important in discriminating those releases from releases from a nuclear explosion.

133Xe↗

AN ALTERNATIVE APPROACH TO MEASURING REVERBERATION LAGS IN ACTIVE GALACTIC NUCLEI

Motivated by recent progress in the statistical modeling of quasar variability, we develop a new approach to measuring emission-line reverberation lags to estimate the size of broad-line regions (BLRs) in active galactic nuclei. Assuming that all emission-line light curves are scaled, smoothed, and displaced versions of the continuum, this alternative approach fits the light curves directly using a damped random walk model and aligns them to recover the time lag and its statistical confidence limits. We introduce the mathematical formalism of this approach and demonstrate its ability to cope with some of the problems for traditional methods, such as irregular sampling, correlated errors, and seasonal gaps. We redetermine the lags for 87 emission lines in 31 quasars and reassess the BLR size-luminosity relationship using 60 H{beta} lags. We confirm the general results from the traditional cross-correlation methods, with a few exceptions. Our method, however, also supports a broad range of extensions. In particular, it can simultaneously fit multiple lines and continuum light curves which improves the lag estimate for the lines and provides estimates of the error correlations between them. Determining these correlations is of particular importance for interpreting emission-line velocity-delay maps. We can also include parameters for luminosity-dependent lags or line responses. We use this to detect the scaling of the BLR size with continuum luminosity in NGC 5548.

79 ASTRONOMY AND ASTROPHYSICS↗

A Process-based Model with Temperature, Water, and Lab-derived Data Improves Predictions of Daily Culex pipiens/restuans Mosquito Density

While the number of human cases of mosquito-borne diseases has increased in North America in the last decade, accurate modeling of mosquito population density has remained a challenge. Longitudinal mosquito trap data over the many years needed for model calibration, and validation is relatively rare. In particular, capturing the relative changes in mosquito abundance across seasons is necessary for predicting the risk of disease spread as it varies from year to year. We developed a discrete, semi-stochastic, mechanistic process-based mosquito population model that captures life-cycle egg, larva, pupa, adult stages, and diapause for Culex pipiens (Diptera, Culicidae) and Culex restuans (Diptera, Culicidae) mosquito populations. This model combines known models for development and survival into a fully connected age-structured model that can reproduce mosquito population dynamics. Mosquito development through these stages is a function of time, temperature, daylight hours, and aquatic habitat availability. The time-dependent parameters are informed by both laboratory studies and mosquito trap data from the Greater Toronto Area. The model incorporates city-wide water-body gauge and precipitation data as a proxy for aquatic habitat. This approach accounts for the nonlinear interaction of temperature and aquatic habitat variability on the mosquito life stages. We demonstrate that the full model predicts the yearly variations in mosquito populations better than a statistical model using the same data sources. This improvement in modeling mosquito abundance can help guide interventions for reducing mosquito abundance in mitigating mosquito-borne diseases like West Nile virus.

59 BASIC BIOLOGICAL SCIENCES↗

Thermodynamics of clusterized matter

Thermodynamics of clusterized matter is studied in the framework of statistical models with noninteracting cluster degrees of freedom. At variance with the analytical Fisher model, exact Metropolis simulation results indicate that the transition from homogeneous to clusterized matter lies along the {rho}={rho}{sub 0} axis at all temperatures and the limiting point of the phase diagram is not a critical point even if the surface energy vanishes at this point. Sensitivity of the inferred phase diagram to the employed statistical framework in the case of finite systems is discussed by considering the grand-canonical and constant-pressure canonical ensembles. A Wigner-Seitz formalism in which the fragment charge is neutralized by a uniform electron distribution allows one to build the phase diagram of neutron star matter as predicted by the cluster model.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Harmonizing tau positron emission tomography in Alzheimer's disease: The CenTauR scale and the joint propagation model

Abstract INTRODUCTION Tau‐positron emission tomography (PET) outcome data of patients with Alzheimer's disease (AD) cannot currently be meaningfully compared or combined when different tracers are used due to differences in tracer properties, instrumentation, and methods of analysis. METHODS Using head‐to‐head data from five cohorts with tau PET radiotracers designed to target tau deposition in AD, we tested a joint propagation model (JPM) to harmonize quantification (units termed “CenTauR” [CTR]). JPM is a statistical model that simultaneously models the relationships between head‐to‐head and anchor point data. JPM was compared to a linear regression approach analogous to the one used in the amyloid PET Centiloid scale. RESULTS A strong linear relationship was observed between CTR values across brain regions. Using the JPM approach, CTR estimates were similar to, but more accurate than, those derived using the linear regression approach. DISCUSSION Preliminary findings using the JPM support the development and adoption of a universal scale for tau‐PET quantification. Highlights Tested a novel joint propagation model (JPM) to harmonize quantification of tau PET. Units of common scale are termed “CenTauRs”. Tested a Centiloid‐like linear regression approach. Using five cohorts with head‐to‐head tau PET, JPM outperformed linearregressionbased approach. Strong linear relationship was observed between CenTauRs values across brain regions.

Neurosciences & Neurology↗

A multi-scale calibration approach for process-oriented aggregated building energy demand models

Long-term energy planning relies largely on projections of future energy demand and hourly load profiles. Aggregate building models are increasingly being utilized to characterize the sensitivity of current and future building stocks to changes in climate, population, and building technology on city-to-regional-to-national scales. Due to challenges in the availability of data, those analyses have been limited to projection of energy demand at a single scale, usually state or country, while long-term planning power system models and production cost models might operate at different spatial scales such as energy regions which are focused on ensuring adequate generation infrastructure. In this work, we propose and evaluate a novel method to calibrate an aggregate building energy demand model (PNNL’s BEND model) against the best available data at the spatial scale of balancing authorities. This approach extends previous work on aggregated building energy demand by facilitating analysis of building energy demand across scales, in particular policy and operational decision-making scales. We show that the bias-corrected model estimates building electric loads reasonably well compared with estimates from a statistical model, but has the additional feature of flexibility across spatial scales. While the calibration approach is presently U.S.-centric and associated with U.S. energy regions, it can be extrapolated to other worldwide regions with similar scale challenges between policy and operational implementation decision making. We discuss the significant challenges involved in formulating and calibrating a complex physical model based on simulations of roughly 100,000 individual buildings against available aggregate regional electric load data and highlight areas for potential future work and improved data collection.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Pro‐ L * ‐ A Probabilistic L * Mapping Tool for Ground Observations

Abstract Both ground and space observations are used extensively in the modeling of space weather processes within the Earth’s magnetosphere. In radiation belt physics modeling, one of the key phase‐space coordinates is L *, which indicates the location of the drift paths of energetic electrons. Global magnetic field models allow a subset of locations on the ground (mainly subauroral) to be mapped along field lines to a location in space and transformed into L *, provided that the initial ground location maps to a closed drift path. This allows observations from ground, or low‐altitude space‐based platforms to be mapped into space in order to inform radiation belt modeling. Many data‐based magnetic field models exist; however, these models can significantly disagree on mapped L * values for a single point on the ground, during both quiet times and storms. We present a state of the art probabilistic L * mapping tool, Pro‐ L *, which produces probability distributions for L * corresponding to a given ground location. Pro‐ L * has been calculated for a high resolution magnetic latitude by magnetic local time grid in the Earth’s Northern Hemisphere. We have developed the probabilistic model using 11 years of L * calculations for seven widely used magnetic field models. Usage of the tool is highlighted for both event studies and statistical models, and we demonstrate a number of potential applications.

79 ASTRONOMY AND ASTROPHYSICS↗

A NEW TEST OF THE STATISTICAL NATURE OF THE BRIGHTEST CLUSTER GALAXIES

A novel statistic is proposed to examine the hypothesis that all cluster galaxies are drawn from the same luminosity distribution (LD). In such a 'statistical model' of galaxy LD, the brightest cluster galaxies (BCGs) are simply the statistical extreme of the galaxy population. Using a large sample of nearby clusters, we show that BCGs in high luminosity clusters (e.g., L {sub tot} {approx}> 4 x 10{sup 11} h {sup -2} {sub 70} L {sub sun}) are unlikely (probability {<=}3 x 10{sup -4}) to be drawn from the LD defined by all red cluster galaxies more luminous than M{sub r} = -20. On the other hand, BCGs in less luminous clusters are consistent with being the statistical extreme. Applying our method to the second brightest galaxies, we show that they are consistent with being the statistical extreme, which implies that the BCGs are also distinct from non-BCG luminous, red, cluster galaxies. We point out some issues with the interpretation of the classical tests proposed by Tremaine and Richstone (TR) that are designed to examine the statistical nature of BCGs, investigate the robustness of both our statistical test and those of TR against difficulties in photometry of galaxies of large angular size, and discuss the implication of our findings on surveys that use the luminous red galaxies to measure the baryon acoustic oscillation features in the galaxy power spectrum.

79 ASTRONOMY AND ASTROPHYSICS↗

Ponderosa pine hydraulic stress predicts more extreme wildfire behavior under future conditions in Bandelier National Monument, New Mexico

Background Live fuel moisture contributes to wildfire spread and reflects plant stress and physiological traits. The anticipated change in live fuel moisture under future conditions is likely non-linear, owing to physiological plant thresholds in water hydraulics. We constructed a mechanistic model of live fuel moisture’s response to water stress to understand the impact of future climate on live fuel moisture. We first gathered data on plant physiology and live fuel moisture for Pinus ponderosa at Bandelier National Monument, NM, USA, and modeled their relationship. We then parameterized a mechanistic plant hydrodynamics model (FATES-HYDRO) to simulate changes in plant stress and a statistical model to simulate the resulting impact on live fuel moisture. We then simulated FATES-HYDRO under future climate anomalies (SSP2-4.5 and SSP5-8.5: 2080–2100) to understand the change in plant stress and estimate its impact on live fuel moisture. Results We found that the number of days below crucial thresholds of live fuel moisture (100% and 79%) increased from contemporary levels (< 100%: 72 days, < 79%: 1.4 days) under SSP2-4.5 (< 100%: 185 days, < 79%: 10.2 day) and increased exponentially under SSP5-8.5 (< 100%: 215 days, < 79%: 65 days). We found that gross primary productivity decreased under both future climate scenarios (contemporary: 336 g C m −2 , SSP2-4.5: 203 g C m −2 , SSP5-8.5: 243 g C m −2 ); however, spring productivity increased under SSP5-8.5, potentially altering fuel loading. We additionally see a potentially lethal loss of conductivity in hydraulic P. ponderosa under SSP5-8.5. Conclusions The overall increase in plant water stress (as represented by loss of hydraulic conductivity and leaf water potential) and lower live fuel moisture appear to be driven by reduced precipitation during late summer monsoons typical of the region, extending the fire season later in the year. We predict increasing variability in the P. ponderosa wildfire regime under both climate projections driven by changing productivity, rising mortality, and an overall decrease in live fuel moisture.

54 ENVIRONMENTAL SCIENCES↗

Sesame Equation of State Number 2100 for Scandium

An equation of state (EOS) for scandium has been constructed using the OpenSesame code and was placed in the SESAME library as material number 2100. The cold curve was constructed with a Mie-Grüneisen model fitted to the high pressure Hugoniot data and to the zero pressure bulk sound speed, the nuclear contribution was calculated from JD Johnson nuclear model and the electronic thermal contribution from the Thomas-Fermi-Dirac statistical model. The EOS behaves reasonably well over a wide range of densities, pressures and temperatures, and compares fairly with the available experimental data. Of the 5 solid phases present in scandium at room temperature, however, only the first one, the hcp phase, is assumed to occur. Also the transition to bcc at room pressure just before melting is ignored. We plan to construct a multiphase EOS as the next step. The purpose of the present calculation was mostly for learning purposes, as is reflected by the way the report is written.

36 MATERIALS SCIENCE↗

Deterministic Calibration of MFiX-PIC, Part 1: Settling Bed

The Particle-in-cell (PIC) numerical approach for modeling granular solids in fluid flow has gained significant interest in recent years. Valued for its often shorter time-to-solution, the PIC formulation relies on modeling statistical groupings of particles called parcels in cooperation with a solids stress model to affect local solids velocity. This is in contrast to the discrete element model (DEM) where every particle in a system is modelled individually and directly coupled to local solids velocity through Newtonian mechanics. The U.S. Department of Energy (DOE), National Energy Technology Laboratory (NETL) develops and maintains Multiphase Flow with Interphase eXchanges (MFiX), a collection of open-source computational fluid dynamics (CFD) solvers. Included in the MFiX suite are traditional two-fluid model (TFM) and DEM solvers, and a recently added PIC solver (NETL, 2021). In general, PIC methodologies offer an accuracy trade-off in lieu of computational speed; and therefore, it is important to assess the credibility of MFiX-PIC simulations. For this purpose, a systematic verification, validation and uncertainty quantification (VVUQ) effort was initiated at NETL to assess the new PIC solver

42 ENGINEERING↗

Improving and Assessing the Quality of Uncertainty Quantification in Deep Learning

Deep learning (DL) models have enjoyed increased attention in recent years because of their powerful predictive capabilities. While many successes have been achieved, standard deep learning methods suffer from a lack of uncertainty quantification (UQ). While the development of methods for producing UQ from DL models is an active area of current research, little attention has been given to the quality of the UQ produced by such methods. In order to deploy DL models to high-consequence applications, high-quality UQ is necessary. This report details the research and development conducted as part of a Laboratory Directed Research and Development (LDRD) project at Sandia National Laboratories. The focus of this project is to develop a framework of methods and metrics for the principled assessment of UQ quality in DL models. This report presents an overview of UQ quality assessment in traditional statistical modeling and describes why this approach is difficult to apply in DL contexts. An assessment on relatively simple simulated data is presented to demonstrate that UQ quality can differ greatly between DL models trained on the same data. A method for simulating image data that can then be used for UQ quality assessment is described. A general method for simulating realistic data for the purpose of assessing a model’s UQ quality is also presented. A Bayesian uncertainty framework for understanding uncertainty and existing metrics is described. Research that came out of collaborations with two university partners are discussed along with a software toolkit that is currently being developed to implement the UQ quality assessment framework as well as serve as a general guide to incorporating UQ into DL applications.

97 MATHEMATICS AND COMPUTING↗

Using MODIS estimates of fractional snow cover area to improve streamflow forecasts in interior Alaska

Remotely sensed snow cover observations give an opportunity to improve operational snow melt and stream flow forecasting in remote regions. This is particularly true in Alaska, where remote basins and a spatially and temporally sparse gaging network plague efforts to understand and forecast the hydrology of subarctic boreal basins and where climate change is leading to rapid shifts in basin function. In this study,the operational framework employed by the United States (US) National Weather Service, including the Alaska Pacific River Forecast Center, is adapted to integrate Moderate Resolution Imaging Spectroradiometer (MODIS) remotely sensed observations of fractional snow cover area (fSCA) to determine if these data improve streamflow forecasts in interior Alaska river basins. Two versions of MODIS fSCA are tested against a base case extent of snow cover derived by aerial depletion curves: the MODIS 10A1(MOD10A1) and the MODIS Snow Cover Area and Grain size (MODSCAG) product over the period 2000–2010. Observed runoff is compared to simulated runoff to calibrate both iterations of the model. MODIS-forced simulations haveimproved snow depletion timing compared with snow telemetry sites in the basins, with discernable increases in skill for the streamflow simulations.The MODSCAG fSCA version provides moderate increases in skill but is similar to the MOD10A1 results. The basins with the largest improvement in streamflow simulations have the sparsest streamflow observations.Considering the numerous low-quality gages (discontinuous, short, or unreliable) and ungauged systems throughout the high-latitude regions of the globe, this result is valuable and indicates the utility of the MODIS fSCAdata in these regions. Additionally, while improvements in predicted discharge values are subtle, the snow model better represents the physical conditions of the snow pack and therefore provides more robust simulations,which are consistent with the US National Weather Service's move toward a physically based National Water Model. Physically based models may also be more capable of adapting to changing climates than statistical models corrected to past regimes. This work provides direction for both the Alaska Pacific River Forecast Center and other forecast centers across the US to implement remote-sensing observations within their operational framework, to refine the representation of snow, and to improve streamflow forecasting skill in basins with few or poor-quality observations.

54 ENVIRONMENTAL SCIENCES↗

Data-driven fuel consumption estimation: A multivariate adaptive regression spline approach

Providing guidance and information to drivers to help them make fuel-efficient route choices remains an important and effective strategy in the near term to reduce fuel consumption from the transportation sector. One key component in implementing this strategy is a fuel-consumption estimation model. In this paper, we developed a mesoscopic fuel consumption estimation model that can be implemented into an eco-routing system. Our proposed model presents a framework that utilizes large-scale, real-world driving data, clusters road links by free-flow speed and fits one statistical model for each of cluster. This model includes predicting variables that were rarely or never considered before, such as free-flow speed and number of lanes. We applied the model to a real-world driving data set based on a global positioning system travel survey in the Philadelphia-Camden-Trenton metropolitan area. Results from the statistical analyses indicate that the independent variables we chose influence the fuel consumption rates of vehicles. But the magnitude and direction of the influences are dependent on the type of road links, specifically free-flow speeds of links. Here, a statistical diagnostic is conducted to ensure the validity of the models and results. Although the real-world driving data we used to develop statistical relationships are specific to one region, the framework we developed can be easily adjusted and used to explore the fuel consumption relationship in other regions.

30 DIRECT ENERGY CONVERSION↗

The MCDB System for Management and Analysis of Petabyte-Scale Uncertain Data

Analysts working with very large data sets often use statistical models to “guess” at unknown, inaccurate, or missing information associated with the data. For example, a distant object viewed through an optical lens will have its position slightly shifted by imperfections in the lens. Thus, rather than considering the object’s observed position to be absolutely correct, it makes sense to take into account the lens’s imperfections to obtain a probabilistic guess as to the object’s true position. For another example, it might be important to associate some sort of error distribution with each of the individual sensors in an array of magnetometers. This error distribution may be complex and include spatially-driven covariances, because errors in nearby sensors are likely to be correlated (caused, for example, by the presence of some nearby, fixed metal object). This project is concerned with the design and implementation of a prototype data management system called the Monte Carlo Database System, or MCDB for short. MCDB allows an expert-level analyst or statistician to attach arbitrary stochastic models to very large data sets in order to “guess” the values for unknown or inaccurate data, such as the actual position of the observed object in the lens example above. When the resulting data set is analyzed, the underlying stochastic models are used to generate hundreds or thousands of possible data set instances, and each of those possible instances is analyzed separately by MCDB. Thus, MCDB does not just give a single answer to the analysis, but it actually gives an empirical distribution of query results that embody the underlying uncertainty, and can in turn be analyzed using standard statistical techniques. The stochastic models in MCDB are implemented as user-defined, external C++ libraries called Variable Generation functions (VG functions for short). Because the VG function interface is exceedingly general, it allows MCDB to be used in a very wide variety of application domains, in conjunction with virtually any stochastic model. Ultimately, we ended up calling the system that we developed over the course of the project SimSQL, to denote the fact that it allowed for stochastic simulation of data. The software developed during the lifetime of the project is available for download from the SimSQL project website: http://cmj4.web.rice.edu/SimSQL/SimSQL.html.

42 ENGINEERING↗

Tail Dependence as a Measure of Teleconnected Warm and Cold Extremes of North American Wintertime Temperatures

Current models for spatial extremes are concerned with the joint upper (or lower) tail of the distribution at two or more locations. Such models cannot account for teleconnection patterns of 2-m surface air temperature ( T 2m ) in North America, where very low temperatures in the contiguous United States may coincide with very high temperatures in Alaska in the wintertime. This dependence between warm and cold extremes motivates the need for a model with opposite-tail dependence in spatial extremes. This work develops a statistical modeling framework that has flexible behavior in all four pairings of high and low extremes at pairs of locations. In particular, we use a mixture of rotations of common Archimedean copulas to capture various combinations of four-corner tail dependence. We study teleconnected T 2m extremes using ERA5 of daily average 2-m temperature during the boreal winter. Further, the estimated mixture model quantifies the strength of opposite-tail dependence between warm temperatures in Alaska and cold temperatures in the midlatitudes of North America, as well as the reverse pattern. These dependence patterns are shown to correspond to blocked and zonal patterns of midtropospheric flow. This analysis extends the classical notion of correlation-based teleconnections to considering dependence in higher quantiles.

54 ENVIRONMENTAL SCIENCES↗

SU-F-J-187: The Statistical NTCP and TCP Models in the Proton Therapy

Purpose: The statistical models (SM) are typically used as a subjective description of a population for which there is only limited sample data, and especially in cases where the relationship between variables is known. The normal tissue complications and tumor control are frequently stochastic effects in the Radiotherapy (RT). Based on probabilistic treatments, it recently has been formulated new NTCP and TCP models for the RT. Investigating the particular requirements for their clinical use in the proton therapy (PT) is the goal of this work. Methods: The SM can be used as phenomenological or mechanistic models. The former way allows fitting real data and getting theirparameters. In the latter one, we should do efforts for determining the parameters through the acceptable estimations, measurements, and/or simulation experiments. Experimental methodologies for determination of the parameters have been developed from the fraction cells surviving the proton irradiation curves in tumor and OAR, and precise RBE models are used for calculating the variable of effective dose. As the executions of these methodologies have a high costs, so we have developed computer tools enable to perform simulation experiments as complement to limitations of the real ones. Results: The requirements for the use of the SM in the PT, such as validation and improvement of the elaborated and existent methodologies for determining the SM parameters and effective dose respectively, were determined. Conclusion: The SM realistically simulates the main processes in the PT, and for this reason these can be implemented in this therapy, which are simples, computable and they have other advantages over some current models. It has been determined some negative aspects for some currently used probabilistic models in the RT, like the LKB NTCP and others derived from logistic functions; which can be improved with the proposed methods in this study.

60 APPLIED LIFE SCIENCES↗

Probabilistic Failure Criterion of SiC/SiC Composites Under Multiaxial Loading

Owing to its excellent mechanical properties and stability under high temperature and neutron irradiation conditions, SiC/SiC composites have emerged as a promising material for light water reactors (LWRs) in the development of accident-tolerant fuel (ATF) systems. Structural integrity and retention of hermeticity are two crucial requirements for SiC/SiC claddings during normal operations, and both of them are closely related to the proportional limit stress (PLS) of the material. Understanding the behavior of SiC/SiC composites under multiaxial stress states and developing a probabilistic approach for evaluating the structural vulnerability are of paramount importance for reliability-based analysis and design of SiC/SiC composite claddings. So far, there has been very limited effort towards experimental and analytical investigations of probabilistic failure of SiC/SiC claddings. This critical knowledge gap motivates this research. A probabilistic failure criterion for SiC/SiC composites under multi-axial loading is developed, and this criterion is incorporated into reliability analysis of the structural integrity of SiC/SiC fuel cladding. The research consists of two parts: 1) experimental investigation of multiaxial failure behavior of SiC/SiC composites, and 2) theoretical modeling of time-dependent probabilistic failure of SiC/SiC cladding. In the experimental investigation, the PLS is determined through the examination of stress-strain response, the acoustic emission measurement, as well as the X-ray computed tomography. The theoretical framework is derived by combin- ing the finite weakest-link statistical model and the subcritical damage growth model. This theoretical model captures the time-dependent failure mechanism of the material, which has a major consequence for predicting the lifetime distribution of the cladding. Meanwhile, the model also predicts that the failure statistics of the cladding depends strongly on the cladding length. The results of the multiaxial experiments reveal the level of statistical variation of the PLS of SiC/SiC materials under different stress states. The theoretical model provides a robust analytical tool for extrapolation of small-scale laboratory test results to the behavior of full-scale claddings. These findings establish a scientific foundation for the development of reliability-based design of SiC/SiC fuel claddings, which will play an essential role in improving the structural safety and integrity of LWRs.

42 ENGINEERING↗