Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA ARC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

The Flow of Plasma in the Solar-Terrestrial Environment

The overall goal of our NASA theory research is to trace the flow of mass, momentum, and energy through the magnetosphere-ionosphere-atmosphere system taking into account the coupling, time delays, and feedback mechanisms that are characteristic of the system. Our approach is to model the magnetosphere-ionosphere-atmosphere (M-I-A) system in a self-consistent quantitative manner using unique global models that allow us to study the coupling between the different regions on a range of spatial and temporal scales. The uniqueness of our global models stems from their high spatial and temporal resolutions, the physical processes included, and the numerical techniques employed. Currently, we have time-dependent global models of the ionosphere, thermosphere, polar wind, plasmasphere, and electrodynamics. It is now becoming clear that a significant fraction of the flow of mass, momentum, and energy in the M-I-A system occurs on relatively small spatial scales. Therefore, an important aspect of our NASA Theory program concerns the effect that mesoscale (100-l000 km) density structures have on the macroscopic flows in the ionosphere, thermosphere, and polar wind. The structures can be created either by structured magnetospheric inputs (i.e., structured electric field, precipitation, or Birkeland current patterns) or by time variations of these inputs due to geomagnetic storms and substorms. Some of the mesoscale structures of interest include sun-aligned polar cap arcs, propagating plasma patches, traveling convection vortices, subauroral ion drift (SAID) channels, gravity waves, and the polar hole.

Schunk, Robert W.↗

Mitigation of nonthermal plasma production to measure the pulsed magnetic field threshold for the thermal formation of plasma from thick aluminum surfaces

Untangling the roles of different plasma formation mechanisms in high-current electrical discharges requires controlling each mechanism and isolating its effects. Recent experiments use this method to find that thermal formation of plasma occurs from 6061-alloy Al conductors by ohmic heating when the surface field reaches a magnetic field threshold of 2.2 MG (independently of {partial_derivative}B/{partial_derivative}t ranging from 30 to 80 MG/{mu}s) [T. J. Awe et al., Phys. Rev. Lett. 104, 035001 (2010)]. The experiments pulse 1.0 MA peak current on the surface of thick ({approx}1.0 mm diameter) aluminum rods in 100 ns. Strong electric fields are necessarily introduced, and precursor plasma may form (e.g., from arcing electrical contacts). To ensure plasma formation is predominantly thermal, a systematic study of multiple combinations of high-current electrodes and central-rod profiles was completed. Data from multiple diagnostics show that the time and location of plasma formation strongly correlate with the hardware combination used. An extensive dataset (greater than 100 shots) enabled numerous hypotheses to be tested regarding plasma formation mechanisms. For hardware with compressed, large-diameter current joints, plasma formation is a predominantly thermal process driven by ohmic heating.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Carbon diffusion in alumina from carbon and Ti{sub 2}AlC thin films

Carbon diffusion is observed in single crystal {alpha}-Al{sub 2}O{sub 3} substrates from carbon and Ti{sub 2}AlC thin films synthesized via pulsed cathodic arc deposition. Diffusion was found to occur at substrate temperatures of 570 deg. C and above. The diffusion coefficient of carbon in {alpha}-Al{sub 2}O{sub 3} is estimated to be of the order 3x10{sup -13} cm{sup 2}/s for deposition temperatures in the 570-770{sup o}C range by examining elastic recoil detection analysis (ERDA) elemental depth profiles. It is suggested that an appropriate diffusion barrier may be useful when depositing carbon containing thin films on {alpha}-Al{sub 2}O{sub 3} substrates at high temperatures.

36 MATERIALS SCIENCE↗

Model of oval and polar cap arc configurations

A model of oval and polar cap arc configurations has been formulated by combining the theory of antiparallel magnetic merging and theories of the evening discrete arc and of the morningside arc systems. Aside from incorporating the verified and yet-to-be-verified predictions of the individual component theories this unified model leads to definite predictions of not only arc configurations but also characteristics of the plasmas that produce the various types of arcs. The model predicts two types of polar cap arcs characterized by the plasma sources: the magnetosheath arc and the plasma sheet arc. Their occurrence should be governed by the By component of the interplanetary magnetic field, and the same type should not occur simultaneously in both hemispheres.

Chiu, Y. T.↗

A Desorbed Gas Molecular Ionization Mechanism for Arcing Onset in Solar Arrays Immersed in a Low-Density Plasma

Previous experimental studies have hypothesized that the onset of Solar Array Arc (SAA) initiation in low-density space plasmas is caused by a desorbed gas molecular ionization mechanism. Indeed past investigations performed at the NASA Glenn Plasma Interaction Facility tend to not only support the desorbed gas molecular ionization mechanism, but have gone as far as identifying the crucial molecular species that must be present for molecular ion dominated process to occur. When electrical breakdown occurs at a triple junction site on a solar array panel, a quasi-neutral plasma cloud is ejected. Assuming the main component of the expelled plasma cloud by weight is due to water vapor, the fastest process available is due to HO molecules and OH(+) ions, or more succinctly, dissociative molecular-ion dominated recombination processes: H2O(+) + e(-) yields H* + OH*. Recently published spectroscopic observations of solar array arc spectra in ground tests have revealed the well-known molecular OH band (302 to 309nm), as well as the molecular SiH band (387nm peak), and the molecular CH band (432nm peak). Note that the OH band is observed in emission arcs where water vapor is present. Strong atomic lines were also observed for H(sub beta) at 486nm and H(sub alpha) at 656.3nm in prior ground testing. Independent supporting evidence of desorbed gas molecular ionization mechanisms also come from measurements of arc current pulse widths at different capacitances. We will revisit an earlier first order approximation demonstrating the dependence of arc current pulse widths on the square root of the capacitance. The simple arc current pulse width model will be then be used to estimate the temperature of the arc plasma (currently believed to be somewhere in the range of 3 to 5 eV). The current paper then seeks to extend the outlined work by including numerous vacuum chamber measurements obtained with a quadrupole mass spectrometer. A small solar array was mounted inside the vacuum chamber. A plasma source, also mounted inside the vacuum chamber, is used to simulate a low-density plasma environment. The solar array is then biased to a high negative potential and allowed to arc while a mass spectrometer is used to record the partial pressure of H2O and to track other significant changes in mass (1 to 150) AMU.

Galofaro, J.↗

Vacuum arc with a distributed cathode spot as a plasma source for plasma separation of spent nuclear fuel and radioactive waste

Results from experimental studies of a vacuum arc with a distributed cathode spot on the heated cathode are presented. Such an arc can be used as a plasma source for plasma separation of spent nuclear fuel and radioactive waste. The experiments were performed with a gadolinium cathode, the properties of which are similar to those of an uranium arc cathode. The heat flux from the plasma to the cathode (and its volt equivalent) at discharge voltages of 4-15 V and discharge currents of 44-81 A, the radial distribution of the emission intensity of gadolinium atoms and singly charged ions in the arc channel at a voltage of 4.3 V, and the plasma electron temperature behind the anode were measured. The average charge of plasma ions at arc voltages of 3.5-8 V and a discharge current of 52 A and the average rate of gadolinium evaporation in the discharge were also determined.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Through-thickness determination of phase composition and residual stresses in thermall barrier coatings using high- energy x-rays.

High-energy X-rays were used to determine the local phase composition and residual stresses through the thickness of as-sprayed and heat-treated plasma-sprayed thermal barrier coatings consisting of a NiCoCrAlY bond coat and an yttria-stabilized zirconia (YSZ) topcoat produced with through-thickness segmentation cracks. The as-sprayed residual stresses reflected the combined influence of quenching stresses from the plasma spray process, thermal expansion mismatch between the topcoat, bond coat and substrate, and stress relief from the segmentation cracks. Heat treatments led to the formation of a thermally grown oxide (TGO) which was in compression in the plane, as well as relief of quenching stresses and development of a stress gradient in the YSZ topcoat. The high-energy X-ray technique used in this study revealed the effects that TGO and segmentation cracks have on the in-plane stress state of the entire coating.

36 MATERIALS SCIENCE↗

MeV-ion beam analysis of the interface between filtered cathodic arc-deposited a-carbon and single crystalline silicon

Amorphous carbon (a-C) films were deposited on Si(100) wafers by a filtered cathodicvacuum arc (FCVA) plasma source. A negative electrical bias was applied tothe silicon substrate in order to control the incident energy of carbon ions. Effects ofthe electrical bias on the a-C/Si interface characteristics were investigated by usingstandard Rutherford backscattering spectrometry (RBS) in the channeling modewith 2.1-MeV He2+ ions. The shape of the Si surface peaks of the RBS/channelingspectra reflects the degree of interface disorder due to atomic displacement fromthe bulk position of the Si crystal. Details of the analysis method developed aredescribed. It was found that the width of the a-C/Si interface increases linearlywith the substrate bias voltage but not the thickness of the a-C film.

36 MATERIALS SCIENCE↗

Combustion-aided suspension plasma spraying of Y{sub 2}O{sub 3} nanoparticles: Synthesis and modeling

Combustion-aided suspension plasma spraying (SPS) was developed for the synthesis of Y{sub 2}O{sub 3} nanoparticles. Numerical models for Ar, Ar/O{sub 2}, and combustion-aided plasma fields were built using FLUENT V6.3.2(c) to compare their different plasma thermophysical properties. Modeling and experimental results both indicate that the plasma field was substantially altered by combustion-aided SPS. The plasma exhibited an elevated volume average temperature and reduced velocity as well as a broadened plasma plume, which resulted in an enhanced vapor supersaturation degree and a faster quenching rate in the radial direction. These can be attributed to the dual effects of oxygen dissociation/recombination and acetone solvent combustion. Consequently, productivity of the obtained nanoparticles increased remarkably and the particles' morphology was improved, with a smaller mean particle size and a narrower size distribution in comparison with those of powder feeding spraying. Furthermore, plasma-induced cubic{yields}monoclinic phase transformation in the as-sprayed Y{sub 2}O{sub 3} particles was restrained by combustion-aided SPS to some extent.

36 MATERIALS SCIENCE↗

Spreading and Solidification of Hollow Molten Droplet under Its Impact onto Substrate: Computer Simulation and Experiment

The peculiarities of plasma treatment of agglomerated (spray dry) YSZ powder and subsequent plasma spraying of produced HOSP powder (consisting of the hollow spherical particles) are analyzed. Formation of splats of hollow YSZ droplets deserves a special attention within thermal spraying. In this case, immediately prior to particle--substrate collision, we have a droplet that consists of a liquid shell enclosing a gas cavity heated to a temperature close to the melt temperature. The paper presented includes the results of computer simulation and model experiments carried out under full control of the key physical parameters: temperature, velocity, external diameter of droplet, thickness of its shell, and temperature of polished substrate. It was shown that formation of splats of hollow droplets proceeds in a manner more stable compared to the case of 'dense' molten particles obtained from fused and crushed compacts, and this provides superior coating-substrate interface.

36 MATERIALS SCIENCE↗

Effect Of The Plasma Deposition Parameters On The Properties Of Ti/TiN Multilayers For Hard Coatings Applications

In this study, we present the effect of the plasma deposition parameters on the mechanical properties of Ti/TiN multilayers. The elaboration of our films has been carried out by RF-Magnetron Sputtering (13.56 MHz) under nitrogen and argon reactive plasma at low pressure. The film depositions have been done on steel substrates. The first step of our study was the optimization of the depositions conditions in order to obtain good quality films. The amount of nitrogen in the sputtering gases being fixed at 10%. The total pressure was set between 2mTorr to 10mTorr. The deposited multilayers were characterized by X-ray diffraction (XRD), energy dispersive spectroscopy (EDS), atomic force microscopy (AFM) and micro-indentation.

36 MATERIALS SCIENCE↗

Thermal Spraying Coatings Assisted by Laser Treatment

Coatings produced by air plasma spraying (APS) are widely used to protect components against abrasive wear and corrosion. However, APS coatings contain porosities and the properties of these coatings may thereby be reduced. To improve these properties, various methods could be proposed, including post-laser irradiation [1-4]. Firstly, PROTAL process (thermal spraying assisted by laser) has been developed as a palliative technique to degreasing and grit-blasting prior to thermal spraying. Secondly, thermal spray coatings are densified and remelted using Laser treatment. In this study, a review of microstructure coatings prepared by laser-assisted air plasma spraying will be presented. Mechanical and magnetic properties will be evaluated in relation to changes in the coating microstructure and the properties of such coatings will be compared with those of as-sprayed APS coatings.

36 MATERIALS SCIENCE↗

X-Ray Photoelectron Spectra of La{sub 0.67}Ca{sub 0.33}MnO{sub 3} Processed by EATPAH Technique

La{sub 0.67}Ca{sub 0.33}MnO{sub 3}(LCMO) colossal magnetoresistance (CMR) materials were sintered to highly dense products by an extended arc thermal plasma assisted heating (EATPAH) technique within a short sintering time of 2.5 minutes as compared to conventional long range heating schedule (few hours of time). 2.5 minutes plasma sintered LCMO showed enhanced T{sub c}(272 K), which is closed to T{sub IM}(275 K)[1] as compared to the conventional sintered LCMO sample. Specimens are analyzed by X-ray Photoelectron Spectra (XPS) and electron probe microstructure analysis (EPMA) to get idea on elemental distribution and valence spectra of all the elements present in the specimen. The binding energy of La, Ca and Mn are analogous to the conventional sintered LCMO and to the reference spectra [2].

36 MATERIALS SCIENCE↗

Gold-implanted shallow conducting layers in polymethylmethacrylate

PMMA (polymethylmethacrylate) was ion implanted with gold at very low energy and over a range of different doses using a filtered cathodic arc metal plasma system. A nanometer scale conducting layer was formed, fully buried below the polymer surface at low implantation dose, and evolving to include a gold surface layer as the dose was increased. Depth profiles of the implanted material were calculated using the Dynamic TRIM computer simulation program. The electrical conductivity of the gold-implanted PMMA was measured in situ as a function of dose. Samples formed at a number of different doses were subsequently characterized by Rutherford backscattering spectrometry, and test patterns were formed on the polymer by electron beam lithography. Lithographic patterns were imaged by atomic force microscopy and demonstrated that the contrast properties of the lithography were well maintained in the surface-modified PMMA.

36 MATERIALS SCIENCE↗

Preparation of the spacer for narrow electrode gap configuration in ionization-based gas sensor

Carbon nanotubes (CNTs) have started to be developed as the sensing element for ionization-based gas sensors due to the demand for improved sensitivity, selectivity, stability and other sensing properties beyond what can be offered by the conventional ones. Although these limitations have been overcome, the problems still remain with the conventional ionization-based gas sensors in that they are bulky and operating with large breakdown voltage and high temperature. Recent studies have shown that the breakdown voltage can be reduced by using nanostructured electrodes and narrow electrode gap. Nanostructured electrode in the form of aligned CNTs array with evenly distributed nanotips can enhance the linear electric field significantly. The later is attributed to the shorter conductivity path through narrow electrode gap. The paper presents the study on the design consideration in order to realize ionization based gas sensor using aligned carbon nanotubes array in an optimum sensor configuration with narrow electrode gap. Several deposition techniques were studied to deposit the spacer, the key component that can control the electrode gap. Plasma spray deposition, electron beam deposition and dry oxidation method were employed to obtain minimum film thickness around 32 {mu}m. For plasma spray method, sand blasting process is required in order to produce rough surface for strong bonding of the deposited film onto the surface. Film thickness, typically about 39 {mu}m can be obtained. For the electron beam deposition and dry oxidation, the film thickness is in the range of nanometers and thus unsuitable to produce the spacer. The deposited multilayer film consisting of copper, alumina and ferum on which CNTs array will be grown was found to be removed during the etching process. This is attributed to the high etching rate on the thin film which can be prevented by reducing the rate and having a thicker conductive copper film.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spatiotemporal study of the local thermodynamic equilibrium deviations in high-intensity discharge lamps

The aim of this work is to study the local thermodynamic equilibrium (LTE) deviations in arc discharges plasma generated in high-intensity discharge lamps operating under an ac (50 Hz) power supply. To achieve this goal, we elaborate a two-temperature, two-dimensional, and time-depending model. We have found numerical results almost reproducing the experimental data, which allows us to validate this model. After validation, we have discussed different energy term effects on the LTE deviations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Influence of bias voltage on structural and optical properties of TiN{sub x} thin films

In the present work, Ti thin films were deposited on Si substrate using DC sputtering technique. Indigenous hot cathode arc discharge plasma system was used for nitriding over these samples, where the plasma parameters and work piece can be controlled independently. A mixture of H{sub 2} and N{sub 2} gases (in the ratio of 80:20) was supplied into the plasma chamber. The effect of bias voltage on the crystal structure, morphology and optical properties was investigated by employing various physical techniques such as X-ray Diffraction, Atomic Force Microscopy and UV-Vis spectrometry. It was found that bias voltage affects largely the crystal structure and band gap which in turn is responsible for the modifications in optical properties of the deposited films.

36 MATERIALS SCIENCE↗

Development of a 2 ns duration high current electron beam source using CsI coated carbon fibre cathode

A 50 ampere beam current having a rise time lesser than 500 pico-seconds with its energy 50 keV is generated using field emission mechanism. Beam duration was 2 ns. CsI coating on carbon fibre cathode was done using plasma spray coating. The results obtained from this cathode were compared to the carbon fibre cathode and the reason behind higher current density in the case of CsI coating has been explained. (author)

43 PARTICLE ACCELERATORS↗