Search NASA⌕ Search

SEARCH · Search NASA

Results for “PROCESS SOLUTIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Aluminum Metal Dissolution for Mark-18A Target Processing

The Mark-18A Program was established to preserve the unique materials found in Mark-18A targets for future research and development activity within the Department of Energy or other U.S. government agencies. The Savannah River Site has 65 Mark-18A targets to be provided for the recovery of high valued isotopes. The majority of the recovery work will be performed in the Savannah River National Laboratory (SRNL) Shielded Cells due to dose concerns. The recovered product will be transported to the Oak Ridge National Laboratory (ORNL) for future research and development tasks. The Mark-18A target material will be removed from their current configuration, dissolved, chemically separated, and calcined to a stable oxide. The baseline flowsheet is patterned after the flowsheet ORNL has previously used to process both Mark-18A and Mark-42 targets. However, it is necessary for SRNL to adapt its facility and the ORNL flowsheet to identify process improvements to successfully recover the actinide materials within the constraints of the SRNL Shielded Cells. These studies evaluated and demonstrated a chemical method for cladding removal using a mixture of sodium nitrate (NaNO 3 ) and sodium hydroxide (NaOH). Experiments provided better insights into dissolution of the Mark-18A aluminum cladding. In particular, these studies measured the effects of temperature on dissolution rate, flammable gas generation, and nitrite formation. Using the lessons learned from batch dissolution testing at SRNL, a continuous dissolution flowsheet was successfully demonstrated using prototypic-shaped materials and chemically-conservative materials. The SRNL target dissolution flowsheet departs from the baseline ORNL flowsheet in small but significant ways as discussed in the following paragraphs. These flowsheet changes facilitate faster initial reaction rates at a given temperature, enable cladding removal at a lower process temperature, and yield a more uniform dissolution rate throughout cladding removal. Multiple tests indicate that the total time at the dissolution temperatures will be about six hours for one fourth of a target. The shorter dissolution time provides the benefit of a single-shift dissolver operation. Off gas sampling determined that the quantities of flammable hydrogen (H 2 ) and ammonia (NH 3 ) expected in the process off gas will meet allowable flammable gas generation rates for the Shielded Cells Facility. The SRNL approach enables NaOH to be added at a constant rate, which simplifies operations in the shielded cells. In all six continuous dissolution tests, the process was easy to control with minimal operator interface. Analyses of process solutions throughout the experiments provide a better understanding of system behavior. The data show consistent behavior across several similar but different test conditions. Between the batch-test and continuous-test data, if future changes to the flowsheet are required, sufficient data exist to adequately predict how the system will respond to those changes. Future work will focus on design, fabrication, and evaluation of a system for dissolution of one-fourth of a Mark-18A target, which will be full-scale operations for SRNL. Based on these results, the process parameters are adequately understood and the system can be operated safely.

36 MATERIALS SCIENCE↗

Roll-to-Roll Integrated Substrates for OLED Lighting (Final Report)

OLED lighting has immense potential as aesthetically pleasing, energy-efficient general illumination. Unlike other light sources, such as incandescents, fluorescents, and inorganic LEDs, OLEDs naturally emit over a large-area surface. They are glare free, do not need to be shaded, and are cool to the touch, requiring no heatsink. The best efficiencies and lifetimes reported are on par with or better than current forms of illumination. However, the cost for OLED lighting remains high – so much so that these products are not market competitive and there is very low consumer demand. We believe that flexible, plastic-based devices will highlight the advantages of aesthetically-pleasing OLED lighting systems while paving the way for lowering both materials and manufacturing costs. These flexible devices require new development in substrate and support technology, which was the focus of the work reported here. Sinovia Technologies, as part of a collaborative team, has developed integrated plastic substrates to serve as supports for flexible OLED lighting. These substrates include a barrier to protect the OLED from moisture and oxygen-related degradation, a smooth, highly conductive transparent anode to define the OLED area, and a light scattering layer to improve emission efficiency. To ensure low cost, the anode pattern must be defined using high throughput, continuous processing, and any pattern shape should be possible. No current patterning technique meets all of these requirements. This SBIR work demonstrated the use of flexographic printing as an effective method of patterning for integrated substrates. Flexography is a letterpress process commonly used for many types of everyday items including boxes, retail bags, milk cartons, food packaging, disposable cups, adhesive tapes, envelopes, wallpaper, and newspaper. The printing process can go as fast as 600 meters per minute with feature resolution around 10 microns, showing promise for low-cost with high throughput. In this case, Sinovia has successfully used this technique to print transparent anode patterns roll-to-roll as part of our integrated substrate for OLED lighting. We have characterized the printed films and tailored the edges of the printed areas for OLED compatibility. We followed this by making white OLEDs using these anodes. To ensure that our anodes were compatible with different OLED stack structures, we fabricated solution-processed polymer white OLEDs, as well as collaborated with OLEDWorks to fabricate evaporated small-molecule devices. Comparing to results from our previous studies, we find that the flexography process does not have any detrimental effects to our overall substrate. We were able to show that our flexographically printed integrated substrate improves OLED efficiency by 24 – 35%, similar to previous results demonstrated using batch-patterning techniques. The success of this work represents two substantial opportunities for OLED lighting manufacturers. The first to first facilitate flexible lighting panels at scale, and the second to lower costs for by enabling roll-to-roll manufacture of the entire device stack. When realized, both of these will help OLED to become market competitive with other forms of general illumination.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Aeroelastic Uncertainty Quantification Studies Using the S4T Wind Tunnel Model

This paper originates from the joint efforts of an aeroelastic study team in the Applied Vehicle Technology Panel from NATO Science and Technology Organization, with the Task Group number AVT-191, titled "Application of Sensitivity Analysis and Uncertainty Quantification to Military Vehicle Design." We present aeroelastic uncertainty quantification studies using the SemiSpan Supersonic Transport wind tunnel model at the NASA Langley Research Center. The aeroelastic study team decided treat both structural and aerodynamic input parameters as uncertain and represent them as samples drawn from statistical distributions, propagating them through aeroelastic analysis frameworks. Uncertainty quantification processes require many function evaluations to asses the impact of variations in numerous parameters on the vehicle characteristics, rapidly increasing the computational time requirement relative to that required to assess a system deterministically. The increased computational time is particularly prohibitive if high-fidelity analyses are employed. As a remedy, the Istanbul Technical University team employed an Euler solver in an aeroelastic analysis framework, and implemented reduced order modeling with Polynomial Chaos Expansion and Proper Orthogonal Decomposition to perform the uncertainty propagation. The NASA team chose to reduce the prohibitive computational time by employing linear solution processes. The NASA team also focused on determining input sample distributions.

Nikbay, Melike↗

Lead free CH{sub 3}NH{sub 3}SnI{sub 3} perovskite thin-film with p-type semiconducting nature and metal-like conductivity

Lead free CH{sub 3}NH{sub 3}SnI{sub 3} perovskite thin film was prepared by low temperature solution processing and characterized using current sensing atomic force microscopy (CS-AFM). Analysis of electrical, optical, and optoelectrical properties reveals unique p-type semiconducting nature and metal like conductivity of this material. CH{sub 3}NH{sub 3}SnI{sub 3} film also showed a strong absorption in visible and near infrared spectrum with absorption onset of 1.3 eV. X-ray Diffraction analysis and scanning electron microscopy (SEM) confirmed a structure of this compound and uniform film formation. The morphology, film uniformity, light harvesting and electrical properties strongly depend on preparation method and precursor solution. CH{sub 3}NH{sub 3}SnI{sub 3} films prepared based on dimethylformamide (DMF) showed higher crystallinity and light harvesting capability compared to the film based on combination of dimethyl sulfoxide (DMSO) with gamma-butyrolactone (GBL). Local photocurrent mapping analysis showed that CH{sub 3}NH{sub 3}SnI{sub 3} can be used as an active layer and have a potential to fabricate lead free photovoltaic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Luminescent Bimetallic Two-Coordinate Gold(I) Complexes Utilizing Janus Carbenes

A series of bimetallic carbene-metal-amide (cMa) complexes have been prepared with bridging biscarbene ligands to serve as a model for the design of luminescent materials with large oscillator strengths and small energy differences between the singlet and triplet states (ΔE ST ). The complexes have a general structure (R 2 N)Au(:carbene—carbene:)Au(NR 2 ). The bimetallic complexes show solvation-dependent absorption and emission that is analyzed in detail. It is found that the molar absorptivity of the bimetallic complexes is correlated with the energy barrier to rotation of the metal–ligand bond. The bimetallic cMa complexes also exhibit short emission lifetimes (τ = 200–300 ns) with high photoluminescence efficiencies (Φ PL > 95%). The radiative rates of bimetallic cMa complexes are 3–4 times faster than that of the corresponding monometallic complexes. Analysis of temperature-dependent luminescence data indicates that the lifetime for the singlet state (τS 1 ) of bimetallic cMa complexes is near 12 ns with a ΔE ST of 40–50 meV. Here the presented compounds provide a general design for cMa complexes to achieve small values for ΔE ST while retaining high radiative rates. Solution-processed organic light-emitting devices (OLEDs) made using two of the complexes as luminescent dopants show high efficiency and low roll-off at high luminance.

14 SOLAR ENERGY↗

The power of event-driven analytics in Large Scale Data Processing

FeedZai is a software company specialized in creating high-­‐throughput low-­‐latency data processing solutions. FeedZai develops a product called "FeedZai Pulse" for continuous event-­‐driven analytics that makes application development easier for end users. It automatically calculates key performance indicators and baselines, showing how current performance differ from previous history, creating timely business intelligence updated to the second. The tool does predictive analytics and trend analysis, displaying data on real-­‐time web-­‐based graphics. In 2010 FeedZai won the European EBN Smart Entrepreneurship Competition, in the Digital Models category, being considered one of the "top-­‐20 smart companies in Europe". The main objective of this seminar/workshop is to explore the topic for large-­‐scale data processing using Complex Event Processing and, in particular, the possible uses of Pulse in the scope of the data processing needs of CERN. Pulse is available as open-­‐source and can be licensed both for non-­‐commercial and commercial applications. FeedZai is interested in exploring possible synergies with CERN in high-­‐volume low-­‐latency data processing applications. The seminar will be structured in two sessions, the first one being aimed to expose the general scope of FeedZai's activities, and the second focused on Pulse itself: 10:00-11:00 FeedZai and Large Scale Data Processing; Introduction to FeedZai; FeedZai Pulse and Complex Event Processing; Demonstration; Use-Cases and Applications; Conclusion and Q&A. 11:00-11:15 Coffee break 11:15-12:30 FeedZai Pulse Under the Hood; A First FeedZai Pulse Application; PulseQL overview; Defining KPIs and Baselines; Conclusion and Q&A. About the speakers Nuno Sebastião is the CEO of FeedZai. Having worked for many years for the European Space Agency (ESA), he was responsible the overall design and development of Satellite Simulation Infrastructure of the agency. Having left ESA to found FeedZai, Nuno is currently responsible for the whole operations of the company. Nuno holds an M.Eng. in Informatics Engineering for the University of Coimbra, and an MBA from the London Business School. Paulo Marques is the CTO of FeedZai, being responsible for product development. Paulo is an Assistant Professor at the University of Coimbra, in the area of Distributed Data Processing, and an Adjunct Associated Professor at Carnegie Mellon, in the US. In the past Paulo lead a large number of projects for institutions like the ESA, Microsoft Research, SciSys, Siemens, among others, being now fully dedicated to FeedZai. Paulo holds a Ph.D. in Distributed Systems from the University of Coimbra.

97 MATHEMATICS AND COMPUTING↗

Chemical Solution Derived Planarization Layers for Highly Aligned IBAD MgO Templates

The main goal of this research is to develop a chemical solution derived planarization layer to fabricate highly aligned IBAD-MgO templates for the development of high temperature superconductor (HTS) based coated conductors. The standard IBAD-MgO template needs an additional electrochemical polishing step of the mechanically polished 50- m-thick Hastelloy C-276 substrates to ensure a flat and smooth surface for subsequent growth of multi-layer buffer architectures, which include: sputtered 80-nm Al2O3; sputtered 7-nm Y2O3; IBAD 10-nm MgO; sputtered 30-nm homo-epi MgO; and sputtered 30-nm LaMnO3 (LMO) layers. We have successfully developed a solution planarization layer that removes the electrochemical polishing step and also acts as a barrier layer. Crack-free, smooth Al2O3 layers were prepared on mechanically polished Hastelloy substrates using a chemical solution process. A nearly 10-15-nm thick Al2O3 layer was formed with each coating and the coating was repeated several times to achieve the desired film thickness with intermediate heat-treatments after each coating. The Al2O3 planarization layer significantly reduced the surface roughness of the substrate. The average surface roughness value, Ra for a starting substrate was 9-10 nm. After 8 coatings of Al2O3 layer, the Ra was reduced to 2 nm. Highly aligned IBAD-MgO layers with out-of-plane and in-plane textures comparable to the standard IBAD-MgO layers were successfully deposited on top of the solution planarization Al2O3 layers with an Y2O3 nucleation layer using a reel-to-reel ion-beam sputtering system. Both homo-epi MgO and LMO layers were subsequently deposited on the IBAD-MgO layers using rf sputtering to complete the buffer stack required for the growth of HTS films. YBa2Cu3O7- (YBCO) films with a thickness of 0.8 m deposited on these IBAD-MgO templates by pulsed laser deposition showed a high self-field critical current density, Jc of 3.04 MA/cm2 at 77 K and 6.05 MA/cm2 at 65 K. These results demonstrate that a low-cost chemical-solution-based, high-throughput Al2O3 planarization layer can remove the electro-polishing step and replace sputtered Al2O3 layers for the production of high Jc YBCO-coated conductors.

Paranthaman, Mariappan Parans↗

Perovskite Solar Cells with Near 100% Internal Quantum Efficiency Based on Large Single Crystalline Grains and Vertical Bulk Heterojunctions

Grain boundaries (GBs) as defects in the crystal lattice detrimentally impact the power conversion efficiency (PCE) of polycrystalline solar cells, particularly in recently emerging hybrid perovskites where non-radiative recombination processes lead to significant carrier losses. Here, the beneficial effects of activated vertical GBs are demonstrated by first growing large, vertically-oriented methylammonium lead tri-iodide (CH 3 NH 3 PbI 3 ) single-crystalline grains. We show that infiltration of p-type doped 2 -7,7 -tetrakis(N,Ndi-p-methoxyphenylamine)-9,9-spirobifluorene (Spiro-OMeTAD) into CH 3 NH 3 PbI 3 films along the GBs creates space charge regions to suppress non-radiative recombination and enhance carrier collection efficiency. Solar cells with such activated GBs yielded average PCE of 16.3 ± 0.9%, which are among the best solution-processed perovskite devices. As an important alternative to growing ideal CH 3 NH 3 PbI 3 single crystal films, which is difficult to achieve for such fast-crystallizing perovskites, activating GBs paves a way to design a new type of bulk heterojunction hybrid perovskite photovoltaics toward theoretical maximum PCE.

14 SOLAR ENERGY↗

A Single-Lap Joint Adhesive Bonding Optimization Method Using Gradient and Genetic Algorithms

A natural process for any engineer, scientist, educator, etc. is to seek the most efficient method for accomplishing a given task. In the case of structural design, an area that has a significant impact on the structural efficiency is joint design. Unless the structure is machined from a solid block of material, the individual components which compose the overall structure must be joined together. The method for joining a structure varies depending on the applied loads, material, assembly and disassembly requirements, service life, environment, etc. Using both metallic and fiber reinforced plastic materials limits the user to two methods or a combination of these methods for joining the components into one structure. The first is mechanical fastening and the second is adhesive bonding. Mechanical fastening is by far the most popular joining technique; however, in terms of structural efficiency, adhesive bonding provides a superior joint since the load is distributed uniformly across the joint. The purpose of this paper is to develop a method for optimizing single-lap joint adhesive bonded structures using both gradient and genetic algorithms and comparing the solution process for each method. The goal of the single-lap joint optimization is to find the most efficient structure that meets the imposed requirements while still remaining as lightweight, economical, and reliable as possible. For the single-lap joint, an optimum joint is determined by minimizing the weight of the overall joint based on constraints from adhesive strengths as well as empirically derived rules. The analytical solution of the sin-le-lap joint is determined using the classical Goland-Reissner technique for case 2 type adhesive joints. Joint weight minimization is achieved using a commercially available routine, Design Optimization Tool (DOT), for the gradient solution while an author developed method is used for the genetic algorithm solution. Results illustrate the critical design variables as a function of adhesive properties and convergences of different joints based on the two optimization methods.

Smeltzer, Stanley S., III↗

An easy-to-fabricate low-temperature TiO{sub 2} electron collection layer for high efficiency planar heterojunction perovskite solar cells

Organometal trihalide perovskite solar cells arguably represent the most auspicious new photovoltaic technology so far, as they possess an astonishing combination of properties. The impressive and brisk advances achieved so far bring forth highly efficient and solution processable solar cells, holding great promise to grow into a mature technology that is ready to be embedded on a large scale. However, the vast majority of state-of-the-art perovskite solar cells contains a dense TiO{sub 2} electron collection layer that requires a high temperature treatment (>450 °C), which obstructs the road towards roll-to-roll processing on flexible foils that can withstand no more than ∼150 °C. Furthermore, this high temperature treatment leads to an overall increased energy payback time and cumulative energy demand for this emerging photovoltaic technology. Here we present the implementation of an alternative TiO{sub 2} layer formed from an easily prepared nanoparticle dispersion, with annealing needs well within reach of roll-to-roll processing, making this technology also appealing from the energy payback aspect. Chemical and morphological analysis allows to understand and optimize the processing conditions of the TiO{sub 2} layer, finally resulting in a maximum obtained efficiency of 13.6% for a planar heterojunction solar cell within an ITO/TiO{sub 2}/CH{sub 3}NH{sub 3}PbI{sub 3-x}Cl{sub x}poly(3-hexylthiophene)/Ag architecture.

36 MATERIALS SCIENCE↗

Structural evolution during solution-based synthesis of Li 7 P 3 S 11 solid electrolyte by synchrotron X-ray total scattering

Solution-based synthesis has emerged as a promising approach for scalable and efficient synthesis of solid electrolytes (SEs). However, the ionic conductivity of solution-synthesized SEs is much lower than that of SEs synthesized by solid state approaches. The structural evolution during the synthesis of SEs is crucial to explaining the decreased ionic conductivities but has not been well understood. Here, in this work, we use synchrotron X-ray total scattering combined with pair distribution function (PDF) analysis to understand the structural evolution during annealing of the solution-processed precursor for the synthesis of Li 7 P 3 S 11 SEs. Combining Bragg diffraction and diffuse scattering, X-ray total scattering enables detection of structural information including phase transition and crystallinity. The results show that the formation of Li 7 P 3 S 11 glass-ceramic starts at 230 °C. Increasing the annealing temperature helps to improve the crystallinity, but the degree of crystallization is still lower than 70.3% even after annealing at 290 °C when thermal decomposition of Li 7 P 3 S 11 to Li 4 P 2 S 6 has occurred. PDF analysis also revealed the existence of acetonitrile used in the solution-based synthesis in the SEs after annealing at high temperatures. The results rationalize the synthesis–property relationship, explain why annealing at 290 °C provides the highest ionic conductivity at the studied temperatures due to an optimal balance for achieving a high crystallinity while suppressing severe decomposition of Li 7 P 3 S 11 , and provide novel insights to develop approaches for synthesizing superior Li 7 P 3 S 11 SEs on a large scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Wide Bandgap Generation (WBGen): Developing the Future Wide Bandgap Power Electronics Engineering Workforce

This Final Technical Report (FTR) summarizes the work conducted at the Center for Power Electronics Systems (CPES) under the Wide-Bandgap Generation (WBGen) fellowship and traineeship program established by the Advanced Manufacturing and Technologies Office (AMMTO) of the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy (EERE) at Virginia Tech, which had as main objective to train the next generation of U.S. citizen power engineers with wide-bandgap (WBG) power semiconductor expertise, with the intent to aid in fulfilling the future workforce needs in this field. The latter was deemed of strategic importance given the fast-paced growth observed—and predicted—in the demand of this technical expertise, whose practitioners have become the enablers and executioners of the electrification transformation process that not just the U.S., but the whole world, is currently undergoing as it seeks for more effective and efficient ways to use energy. As such, the WBGen program set forth to achieve its educational goals, which in addition sought to broaden the range of WBG-based power electronics by conducting research and development on high-efficiency grid apparatus and high-efficiency electrical power systems, and to also enhance the power engineering curriculum by formalizing WBG-oriented design procedures replacing existent yet now obsolete design procedures developed for Silicon (Si) based power electronics. This effort led CPES to spearhead the development of a new major within The Bradley Electrical and Computer Engineering (ECE) Department at Virginia Tech, namely Electronic Power and Energy Systems (EPES), which coalesced power electronics and power systems courses to provide undergraduate students with a strong formation in the power engineering field, while creating a pipeline of graduate students that could pursue the WBG-based curriculum and conduct research at CPES. In all, in what is considered a true success, eight of the twenty WBGen fellows that graduated program were recruited from the ECE department undergraduate cohort. The traineeship emphasized as well, from its beginning, the partnership with industry and national laboratories, which took advantage of the successful industry consortium at CPES that has historically been formed by 80–90 power and energy companies working in close collaboration with the center. This gave WBGen fellows the accessibility and possibility to conduct internships at partner facilities during the summer months, focused solely on the evaluation, testing, and adoption of WBG devices, which were many times tightly related to their respective research work and plans. In addition, WBGen fellows conducted their main research work within the confines of research programs at CPES conducted with these industry partners, providing them with a unique opportunity to develop not just their technical expertise—while advancing their knowledge, but to also learn and practice a slew of skills needed for their professional growth. As such, the fellows tackled a variety of WBG-related research topics, from device reliability and capability aspects as well as packaging and integration, encompassing the use of advanced materials and new structures, current sharing challenges, and insulation systems, to advanced gate-drivers with integrated sensors and protection mechanisms and active current- and voltage-based control, to optimized layouts seeking to maximize the switching and power processing performance of these devices, to power processing solutions adopting Gallium-Nitride (GaN) and Silicon-Carbide (SiC) power semiconductors for a variety of applications; including radiation-hardened converters for space dc distribution systems, direct three-phase ac-to-ac power converters for aerospace systems, dc-ac inverters for automotive traction drives, high-frequency isolated dc-dc battery chargers also for heavy transportation systems, and medium-voltage dc-dc and dc-ac converters for distribution systems and future power grids. The WBGen program ultimately graduated a total of 20 power engineers, all experts on WBG-based power electronics, awarding 18 M.S. and 2 PhD degrees in the process. These fellows, all U.S. citizens, allowed CPES to increase the number of citizens students to 33 % at the peak of the program, as the traineeship made possible the recruitment of talent with more attractive graduate research assistantship (GRA) contracts. Unfortunately, the present U.S. citizen enrollment at CPES has declined back to historic levels—approximately 10 %, as the regular GRA rates are not competitive enough when compared with entry-level industry jobs. In all, WBGen fellows published a total of 7 peer-reviewed journal articles, 44 papers at international technical conferences, made 42 presentations at international technical conferences, and filed 4 invention disclosures and patent applications, which have since then been granted by the U.S. Patent and Trademark Office (USPTO). Their contribution to CPES, Virginia Tech, the United States, and the world, has been significant, and continues to yield results thanks to the exemplary career that the fellows have initiated at many of the partners of the program, which include Wolfspeed, Raytheon Technologies, Infineon, Lockheed Martin, Dominion Energy, Northrop Grumman, Rivian, Aerospace Corporation, Sandia National Laboratory, National Renewable Energy Laboratory, John Hopkins University, and Virginia Tech.

14 SOLAR ENERGY↗

Structural and magnetic studies of nanocrystalline Y{sub 2}Ir{sub 2}O{sub 7}

In this paper, we discuss synthesis of Y{sub 2}Ir{sub 2}O{sub 7} nanoparticles via chemical solution process. Structural analysis shows single cubic phase with Fd-3m space group symmetry. The particle size and distribution were studied by Transmission Electron Microscopy experiments. The average particle size turns out to be 50nm, which is in good agreement with the XRD results. Magnetic characterization shows no evidence of long range ordering even in presence of strong correlations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Bayesian Approach to Predict Solubility Parameters

Abstract Solubility is a ubiquitous phenomenon in many aspects of material science. While solubility can be determined by considering the cohesive forces in a liquid via the Hansen solubility parameters (HSP), quantitative structure–property relationship models are often used for prediction, notably due to their low computational cost. Here, gpHSP, an interpretable and versatile probabilistic approach to determining HSP, is reported. Our model is based on Gaussian processes, a Bayesian machine learning approach that provides uncertainty bounds to prediction. gpHSP achieves its flexibility by leveraging a variety of input data, such as SMILES strings, COSMOtherm simulations, and quantum chemistry calculations. gpHSP is built on experimentally determined HSP, including a general solvents set aggregated from the literature, and a polymer set experimentally characterized by this group of authors. In all sets, a high degree of agreement is obtained, surpassing well‐established machine learning methods. The general applicability of gpHSP to miscibility of organic semiconductors, drug compounds, and in general solvents is demonstrated, which can be further extended to other domains. gpHSP is a fast and accurate toolbox, which could be applied to molecular design for solution processing technologies.

Sanchez‐Lengeling, Benjamin↗

Proton-exchange induced reactivity in layered oxides for lithium-ion batteries

LiNi x Co y Mn 1-x-y O 2 (0 < x, y < 1, NCM) is the dominant positive material for the state-of-the-art lithium-ion batteries. However, the sensitivity of NCM materials to moisture makes their manufacturing, storage, transportation, electrode processing and recycling complicated. Although it is recognized that protons play a critical role in their structure stability and performance, proton exchange with Li + in NCM materials has not been well understood. Here, we employ advanced characterizations and computational studies to elucidate how protons intercalate into the layered structure of NCM, leading to the leaching of Li + and the formation of protonated NCM. It is found that protonation facilitates cation rearrangement and formation of impurity phases in NCM, significantly deteriorating structural stability. The adverse effects induced by protons become increasingly pronounced with a higher Ni content in NCM. Through a comprehensive investigation into the thermodynamics and kinetics of protonation, we discover that Li deficiencies in NCM materials can be resolved via solution process in the presence of Li + ions and controlled proton concentration. The underlying mechanism of relithiation is further explored through materials characterizations and kinetics modeling. This work provides crucial insights into controlling structural and compositional defects of Li-ion battery positive material in complicated processing environment.

batteries↗

Opto-electronic transport properties of graphene oxide based devices

Large area, solution-processed, graphene oxide (GO)nanocomposite based photo FET has been successfully fabricated. The device exhibits p-type charge transport characteristics in dark condition. Our measurements indicate that the transport characteristics are gate dependent and extremely sensitive to solar light. Photo current decay mechanism of GO is well explained and is associated with two phenomena: a) fast response process and b) slow response process. Slow response photo decay can be considered as the intrinsic phenomena which are present for both GO and reduced GO (r-GO), whereas the first response photo decay is controlled by the surface defect states. Demonstration of photo FET performance of GO thin film is a significant step forward in integrating these devices in various optoelectronic circuits.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Aqueous processing of organic semiconductors enabled by stable nanoparticles with built-in surfactants

The introduction of oligoether side chains onto a polymer backbone can help to stabilise polymeric dispersions in water without the necessity of surfactants or additives when conjugated polymer nanoparticles are prepared. A series of poly(3-hexylthiophene) (P3HT) derivatives with different content of a polar thiophene derivative 3-((2-methoxyethoxy)methyl)thiophene was interrogated to find the effect of the polar chains on the stability of the formed nanoparticles, as well as their structural, optical, electrochemical, and electrical properties. Findings indicated that incorporation of 10–20 percent of the polar side chain led to particles that are stable over a period of 42 days, with constant particle size and polydispersity, however the particles from the polymer with 30 percent polar side chain showed aggregation effects. The polymer dispersions showed a stronger solid-like behaviour in water with decreasing polar side chain content, while thin film deposition from water was found to afford globular morphologies and crystallites with more isotropic orientation compared to conventional solution-processed films. As a proof-of-principle, field-effect transistors were fabricated directly from the aqueous dispersions demonstrating that polymers with hydrophilic moieties can be processed in water without the requirement of surfactants.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Colloidal Quantum Shells: An Emerging 2D Semiconductor for Energy Applications

Low-dimensional semiconductors hold strong promise for future energy applications. These nanomaterials are inexpensive to process and offer a broad spectrum of attractive quantum-mechanical properties. The notorious problem of low-dimensional nanostructures, however, lies in their limited performance under high energetic loads, when more than one exciton per particle is created. Multiple excitons undergo fast annihilation, causing efficiently roll-off in energy-intensive applications, including high-brightness LEDs, X-ray scintillators, and solar cells. In this prospective, we will highlight an emerging type of low-dimensional semiconductors that allows avoiding such multi-exciton (MX) energy losses. Recently demonstrated colloidal quantum shells benefit from the spatial separation of multiple excitons, which leads to extraordinary improvements to MX lifetimes and MX quantum yield. This makes quantum shell morphology an attractive candidate for solution-processed optical and electrical devices. In this Focus Review, we compare the optoelectronic properties of quantum shells against other low-dimensional semiconductors and discuss their emerging opportunities in solid-state lighting and energy-harvesting applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗