SEARCH · Search NASA

Results for “Partitioning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

All sources NASA NTRS DOE OSTI

DOE OSTI2013

Experimental Determination of the Speciation, Partitioning, and Release of Perrhenate as a Chemical Surrogate for Pertechnetate from a Sodalite-Bearing Multiphase Ceramic Waste Form

A key component to closing the nuclear fuel cycle is the storage and disposition of nuclear waste in geologic systems. Multiphase ceramic waste forms have been studied extensively as a potential host matrix for nuclear waste. Understanding the speciation, partitioning, and release behavior of radionuclides immobilized in multiphase ceramic waste forms is a critical aspect of developing the scientific and technical basis for nuclear waste management. In this study, we evaluated a sodalite-bearing multiphase ceramic waste form (i.e., fluidized-bed steam reform sodium aluminosilicate [FBSR NAS] product) as a potential host matrix for long-lived radionuclides, such as technetium (99Tc). The FBSR NAS material consists primarily of nepheline (ideally NaAlSiO4), anion-bearing sodalites (ideally M8[Al6Si6O24]X2, where M refers to alkali and alkaline earth cations and X refers to monovalent anions), and nosean (ideally Na8[AlSiO4]6SO4). Bulk x-ray absorption fine structure analysis of the multiphase ceramic waste form, suggest rhenium (Re) is in the Re(VII) oxidation state and has partitioned to a Re-bearing sodalite phase (most likely a perrhenate sodalite Na8[Al6Si6O24](ReO4)2). Rhenium was added as a chemical surrogate for 99Tc during the FBSR NAS synthesis process. The weathering behavior of the FBSR NAS material was evaluated under hydraulically unsaturated conditions with deionized water at 90 C. The steady-state Al, Na, and Si concentrations suggests the weathering mechanisms are consistent with what has been observed for other aluminosilicate minerals and include a combination of ion exchange, network hydrolysis, and the formation of an enriched-silica surface layer or phase. The steady-state S and Re concentrations are within an order of magnitude of the nosean and perrhenate sodalite solubility, respectively. The order of magnitude difference between the observed and predicted concentration for Re and S may be associated with the fact that the anion-bearing sodalites contained in the multiphase ceramic matrix are present as mixed-anion sodalite phases. These results suggest the multiphase FBSR NAS material may be a viable host matrix for long-lived, highly mobilie radionuclides which is a critical aspect in the management of nuclear waste.

Pierce, Eric M↗

DOE OSTI2013

Experimental determination of the speciation, partitioning, and release of perrhenate as a chemical surrogate for pertechnetate from a sodalite-bearing multiphase ceramic waste form

A key component to closing the nuclear fuel cycle is the storage and disposition of nuclear waste in geologic systems. Multiphase ceramic waste forms have been studied extensively as a potential host matrix for nuclear waste. Understanding the speciation, partitioning, and release behavior of radionuclides immobilized in multiphase ceramic waste forms is a critical aspect of developing the scientific and technical basis for nuclear waste management. In this study, we evaluated a sodalite-bearing multiphase ceramic waste form (i.e., fluidized-bed steam reform sodium aluminosilicate [FBSR NAS] product) as a potential host matrix for long-lived radionuclides, such as technetium (99Tc). The FBSR NAS material consists primarily of nepheline (ideally NaAlSiO4), anion-bearing sodalites (ideally M8[Al6Si6O24]X2, where M refers to alkali and alkaline earth cations and X refers to monovalent anions), and nosean (ideally Na8[AlSiO4]6SO4). Bulk X-ray absorption fine structure analysis of the multiphase ceramic waste form, suggest rhenium (Re) is in the Re(VII) oxidation state and has partitioned to a Re-bearing sodalite phase (most likely a perrhenate sodalite Na8[Al6Si6O24](ReO4)2). Rhenium was added as a chemical surrogate for 99Tc during the FBSR NAS synthesis process. The weathering behavior of the FBSR NAS material was evaluated under hydraulically unsaturated conditions with deionized water at 90 ?C. The steady-state Al, Na, and Si concentrations suggests the weathering mechanisms are consistent with what has been observed for other aluminosilicate minerals and include a combination of ion exchange, network hydrolysis, and the formation of an enriched-silica surface layer or phase. The steady-state S and Re concentrations are within an order of magnitude of the nosean and perrhenate sodalite solubility, respectively. The order of magnitude difference between the observed and predicted concentration for Re and S may be associated with the fact that the anion-bearing sodalites contained in the multiphase ceramic matrix are present as mixed-anion sodalite phases. These results suggest the multiphase FBSR NAS material may be a viable host matrix for long-lived, highly mobilie radionuclides which is a critical aspect in the management of nuclear waste.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2015

Micro-fluidic partitioning between polymeric sheets for chemical amplification and processing

A system for fluid partitioning for chemical amplification or other chemical processing or separations of a sample, comprising a first dispenser of a first polymeric sheet, wherein the first polymeric sheet contains chambers; a second dispenser of a second polymeric sheet wherein the first dispenser and the second dispenser are positioned so that the first polymeric sheet and the second polymeric sheet become parallel; a dispenser of the fluid positioned to dispense the fluid between the first polymeric sheet and the second polymeric sheet; and a seal unit that seals the first polymeric sheet and the second polymeric sheet together thereby sealing the sample between the first polymeric sheet and the second polymeric sheet and partitioning the fluid for chemical amplification or other chemical processing or separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2017

Micro-fluidic partitioning between polymeric sheets for chemical amplification and processing

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2017

Partitioned key-value store with atomic memory operations

A partitioned key-value store is provided that supports atomic memory operations. A server performs a memory operation in a partitioned key-value store by receiving a request from an application for at least one atomic memory operation, the atomic memory operation comprising a memory address identifier; and, in response to the atomic memory operation, performing one or more of (i) reading a client-side memory location identified by the memory address identifier and storing one or more key-value pairs from the client-side memory location in a local key-value store of the server; and (ii) obtaining one or more key-value pairs from the local key-value store of the server and writing the obtained one or more key-value pairs into the client-side memory location identified by the memory address identifier. The server can perform functions obtained from a client-side memory location and return a result to the client using one or more of the atomic memory operations.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2019

Partitioned key-value store with one-sided communications for secondary global key lookup by range-knowledgeable clients

Partitioned key-value stores with one-sided communications are provided for secondary global key lookup by range-knowledgeable clients. A secondary global lookups is performed in a partitioned key-value store by receiving a request from an application for a secondary global key; accessing metadata to identify a first server storing the secondary global key; instructing the identified first server to store a first value corresponding to the requested secondary global key into a memory address of the client; and returning program control to the application, wherein the first server identifies a primary key corresponding to the requested secondary global key and instructs a second server storing the corresponding primary key to store a second value corresponding to the primary key into the memory address of the client. The second server stores the second value corresponding to the primary key into the first memory address of the client.

Bent, John M.↗

DOE OSTI2019

Parallel storage system with burst buffer appliance for storage of partitioned key-value store across a plurality of storage tiers

Parallel storage systems are provided with a burst buffer appliance for storage of a partitioned key-value store across a plurality of storage tiers. The burst buffer appliance is configured to store key-value data on first and second storage tiers comprising respective disjoint subsets of storage. One or more servers in the partitioned key-value store provide (i) an interface between one or more local key-value stores and one or more additional storage architectures, and/or (ii) a key value interface that provides access to at least one hardware key-value store. The local key-values are optionally sorted both locally by the local store and globally by the overall MDHIM framework. The local and global sorting can be leveraged to provide batch input/output (IO) operations that aggregate multiple requests into batch operations on one or more sorted ranges.

Bent, John M.↗

DOE OSTI2015

Main results of the french R and D on minor actinides partitioning, a significant improvement towards nuclear waste reduction - 15618

In the framework of the successive 1991 and 2006 Waste Management Act, French government supported a very significant R and D program on partitioning and transmutation of minor actinides (MA). This program aims to study potential solutions for still minimizing the quantity and the hazardousness of final waste, by MA recycling. Indeed, MA recycling can reduce the heat load and the half-life of most of the waste to be buried to a couple of hundred years, overcoming the concerns of the public related to the long-life of the waste. Within this framework, this paper aims to present the most recent progress obtained in CEA on the development of innovative actinide partitioning hydrometallurgical processes in support of their recycling, either in an homogeneous mode (MA are recycled at low concentration in all the standard reactor fuel) or in an heterogeneous mode (MA are recycled at higher concentration in specific targets, at the periphery of the reactor core). Recovery performances obtained on recent tests in high active conditions of the so-called GANEX and DIAMEX-SANEX process will be presented and discussed in light of the potential P and T scenarios. Finally, recent developments regarding the recycling of the sole Am will be presented as well as the results obtained on highly active solutions for this so-called EXAM process. This set of results gives to the French government a portfolio of potential recycling processes which could be separately and progressively implemented if decided. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2016

On the Modeling of Wall Heat Flux Partitioning in Subcooled Flow Boiling

Accurate prediction of void distribution in reactor coolant channels at subcooled boiling conditions is an important factor in the analysis of the operating conditions of both pressurized water reactors (PWRs) and boiling water reactors (BWRs). Its importance arises from purely thermal-hydraulic considerations (thermal limits, CRUD formation, etc.) and the impact of void reactivity feedback on core neutronics. A mechanistic multidimensional model of subcooled boiling was originally developed by Kurul and Podowski. Whereas this model has been implemented in several commercial CFD codes and successfully used in computer simulations of flow and phase distributions in the coolant channels of light water reactor, additional new modeling aspects of forced-convection subcooled boiling heat transfer have been investigated in recent studies. The purpose of this paper is to formulate a modified model of wall heat flux partitioning, which allows for capturing and quantifying the effect of simultaneous evaporation and condensation at the heated wall on the net evaporation rate and wall temperature. The new model has been implemented in the NPHASE-CMFD code, numerically tested and validated against experimental data. A mechanistic wall heat flux partitioning model for subcooled flow boiling has been presented. This model has been combined with extensively tested models of interfacial mass, momentum and energy transfer terms. It turns out that the model predictions of the wall temperature and void fraction are in good agreement with the experimental data of reference. Future work will focus on the continuation of model validation against experimental data, and on extending its scope to include the phenomena governing departure from nucleate boiling. (authors)

42 ENGINEERING↗

DOE OSTI2017

Flexible Spatial Partitions in MPACT Through Module-Based Data Passing

As part of the Consortium for Advanced Simulation of Light Water Reactors (CASL), the Virtual Environment for Reactor Applications (VERA) is being developed to provide high-fidelity multiphysics simulations of nuclear reactor cores. The MPACT code being developed collaboratively by Oak Ridge National Laboratory and the University of Michigan is the primary deterministic neutron transport solver available within VERA. MPACT employs the 2D/1D method to solve 3D problems using 2D method of characteristics (MOC) radial transport solvers with 1D nodal expansion method-based P3 (NEM-P3) axial transport solvers, which are coupled using axial and radial transverse leakages. A 3D coarse mesh finite difference (CMFD) solver is used to provide accelerated convergence and stability. Quarter-core problems in MPACT are typically run on moderately sized clusters ({approx}500-10,000 cores). As such, it relies heavily on spatial decomposition, both radially and axially, using MPI data communication along spatial domain boundaries to pass angular flux boundary condition and neighboring data. The initial spatial decomposition strategy implemented into MPACT overlaid a Cartesian grid over the core to form the domain boundaries. With this approach, a single buffer spanning across the entire boundary between two spatial domains is passed to a domain's neighbor. Additionally, only one neighboring domain index was allowed in each direction. For example, the entire eastern boundary of a domain must be the entire western boundary of the corresponding neighbour's domain. This implementation helped to execute cases on several thousand cores, where substantial radial decomposition was used. The default for several years was to use assembly decomposition, which yielded 73 radial partitions in the Watts Bar Unit 1 (WBN1) models being analyzed. However, as CASL formed stronger connections with industry partners, there was a strong push to allow MPACT to run on fewer cores, preferably in the 500-1,000 core range. Such cases require much less radial decomposition, typically with 8-16 radial domains on each plane. Unfortunately, the previous decomposition strategy is very limited in its ability to yield well-balanced domains, and it does not permit partitions with an arbitrary number of domains, particularly with small numbers of radial domains (3, 5, 7, 11, 13, etc.). With these limitations, a more flexible approach that provided more even-load balancing was needed. The details of this new strategy are outlined here, along with insights to its advantages. The examples provided are for the WBN1 core, which has been the focus of several initial CASL analyses. It is worth noting that spatial decomposition strategies have been employed in many codes with focus on a number of different transport methodologies. The references cited are not exhaustive as this has been very important research topic across many areas.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2018

Exploiting Geometric Partitioning in Task Mapping for Parallel Computes

We present a new method for mapping applications' MPI tasks to cores of a parallel computer such that applications' communication time is reduced. We address the case of sparse node allocation, where the nodes assigned to a job are not necessarily located in a contiguous block nor within close proximity to each other in the network, although our methods generalize to contiguous allocations as well. The goal is to assign tasks to cores so that interdependent tasks are performed by "nearby' cores, thus lowering the distance messages must travel, the amount of congestion in the network, and the overall cost of communication. Our new method applies a geometric partitioning algorithm to both the tasks and the processors, and assigns task parts to the corresponding processor parts. We also present a number of algorithmic optimizations that exploit specific features of the network or application. We show that, for the structured finite difference mini-application MiniGhost, our mapping methods reduced communication time up to 75% relative to MiniGhost's default mapping on 128K cores of a Cray XK7 with sparse allocation. For the atmospheric modeling code E3SM/HOMME, our methods reduced communication time up to 31% on 32K cores of an IBM BlueGene/Q with contiguous allocation.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2016

Comparison of fluid-fluid interfacial areas measured with X-ray microtomography and interfacial partitioning tracer tests for the same samples

Two different methods are currently used for measuring interfacial areas between immiscible fluids within 3-D porous media, high-resolution microtomographic imaging and interfacial partitioning tracer tests (IPTT). Both methods were used in this study to measure nonwetting/wetting interfacial areas for a natural sand. The microtomographic imaging was conducted on the same packed columns that were used for the IPTTs. This is in contrast to prior studies comparing the two methods, for which in all cases different samples were used for the two methods. In addition, the columns were imaged before and after the IPTTs to evaluate the potential impacts of the tracer solution on fluid configuration and attendant interfacial area. The interfacial areas measured using IPTT are ~5 times larger than the microtomographic-measured values, which is consistent with previous work. Analysis of the image data revealed no significant impact of the tracer solution on NAPL configuration or interfacial area. Furthermore, other potential sources of error were evaluated, and all were demonstrated to be insignificant. The disparity in measured interfacial areas between the two methods is attributed to the limitation of the microtomography method to characterize interfacial area associated with microscopic surface roughness due to resolution constraints.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2024

Tailorable Multi–Modular Pore–Space–Partitioned Vanadium Metal–Organic Frameworks for Gas Separation

Currently, few porous vanadium metal-organic frameworks (V-MOFs) are known and even fewer are obtainable as single crystals, resulting in limited information on their structures and properties. Here this work demonstrates remarkable promise of V-MOFs by presenting an extensible family of V-MOFs with tailorable pore geometry and properties. The synthesis leverages inter-modular synergy on a tri-modular pore-partitioned platform. New V-MOFs show a broad range of structural features and sorption properties suitable for gas storage and separation applications for C 2 H 2 /CO 2 , C 2 H 6 /C 2 H 4 , and C 3 H 8 /C 3 H 6 . The c/a ratio of the hexagonal cell, a measure of pore shape, is tunable from 0.612 to 1.258. Other tunable properties include pore size from 5.0 to 10.9 Å and surface area from 820 to 2964 m 2 g –1 . With C 2 H 2 /CO 2 selectivity from 3.3 to 11 and high uptake capacity for C 2 H 2 from 65.2 to 182 cm 3 g –1 (298K, 1 bar), an efficient separation is confirmed by breakthrough experiments. The near-record high uptake for C 2 H 6 (166.8 cm 3 g –1 ) contributes to the promise for C 2 H 6 -selective separation of C 2 H 6 /C 2 H 4 . The multi-module pore expansion enables transition from C 3 H 6 -selective to more desirable C 3 H 8 -selective separation with extraordinarily high C 3 H 8 uptake (254.9 cm 3 g –1 ) and high separation potential (1.25 mmol g –1 ) for C 3 H 8 /C 3 H 6 (50:50 v/v) mixture.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Ultrastable Carboxyl–Functionalized Pore–Space–Partitioned Metal–Organic Frameworks for Gas Separation

Isoreticular chemistry, which enables property optimization by changing compositions without changing topology, is a powerful synthetic strategy. One of the biggest challenges facing isoreticular chemistry is to extend it to ligands with strongly coordinating substituent groups such as unbound –COOH, because competitive interactions between such groups and metal ions can derail isoreticular chemistry. It is even more challenging to have an isoreticular series of carboxyl-functionalized MOFs capable of encompassing chemically disparate metal ions. Furthermore, with the simultaneous introduction of carboxyl functionalization and pore space partition, a family of carboxyl-functionalized materials is developed in diverse compositions from homometallic Cr 3+ and Ni 2+ to heterometallic Co 2+ /V 3+ , Ni 2+ /V 3+ , Co 2+ /In 3+ , Co 2+ /Ni 2+ . Cr-MOFs remain highly crystalline in boiling water. Unprecedentedly, one Cr-MOF can withstand the treatment cycle with 10m NaOH and 12m HCl, allowing reversible inter-conversion between unbound –COOH acid form and –COO – base form. These materials exhibit excellent sorption properties such as high uptake capacity for CO 2 (100.2 cm 3 g –1 ) and hydrocarbon gases (e.g., 142.1 cm 3 g –1 for C 2 H 2 , 110.5 cm 3 g –1 for C 2 H 4 ) at 1 bar and 298K, high benzene/cyclohexane selectivity (up to ≈40), and promising separation performance for gas mixtures such as C 2 H 2 /CO 2 and C 2 H 2 /C 2 H 4 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Evapotranspiration Partitioning Using Flux Tower Data in a Semi-Arid Ecosystem

Information about evapotranspiration (ET) and its components, that is, evaporation and transpiration, is crucial for a wide range of water and ecosystem management applications. However, partitioning ET into its two components is often challenging because of their spatiotemporal variabilities and lack of process understanding. This study developed a machine learning (ML) framework to shed light on ET processes and assess the relative importance of different drivers by incorporating hydrometeorology and biomass productivity variables. The Shapley Additive Explanations (SHAP) approach was applied to enhance explainability and rank the importance of ET drivers and their components. A total of 62 variables covering hydrometeorological and biomass productivity dimensions were considered from the Reynolds Creek Critical Zone Observatory (CZO) station in Idaho. The variable importance assessment identified the leading drivers individually for evaporation, transpiration and ET (soil water content for evaporation, vapour pressure deficit for transpiration and soil water content for ET). The results further highlighted the value of combining hydrometeorological and biomass productivity variables to achieve better predictability of ET processes.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Enhancing Mechanical Properties of Carbon–Silicon Steel through Two–Stage Quenching and Partitioning with Bainitic Transformation: Ultimate Tensile Strength of 1875 MPa and Total Elongation of 8.03%

To achieve the desired microstructural properties, the ongoing development and innovation in new structural steels require novel thermal processing. This study aims to improve the mechanical properties of a commercial spring carbon–silicon steel by tailoring its microstructure through a process involving quenching and partitioning (Q&P) followed by bainitic transformation. A two–stage Q&P process is proposed to generate a nanoscale dispersion of stable retained austenite and carbides within the tempered martensite and bainite microstructure. The resulting tensile properties demonstrate a yield strength of 1280 MPa, an ultimate tensile strength of 1875 MPa, and a total elongation of 8.03%. These values surpass those of conventional spring 9254 steel, highlighting the effectiveness of the thermal treatment design. Microstructure analysis reveals the presence of tempered martensite, bainite sheaves, nanoscale carbides, and aggregates of retained austenite. Moreover, the resulting body–centered cubic matrix exhibits minimal lattice tetragonality of ≈1.0051, coupled with stable retained austenite featuring a carbon concentration of ≈3.42 ± 0.5 wt%, resulting in outstanding strength–ductility properties. In conclusion, these findings indicate that the proposed two–stage Q&P process, followed by bainitic transformation, significantly enhances the mechanical properties of carbon–silicon steels, making it a promising candidate for high–performance spring applications.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Revisiting a Drag Partition Model For Canopy-Like Roughness Elements

Turbulent flows over a large surface area (S) covered by n obstacles experience an overall drag due to the presence of the ground and the protruding obstacles into the flow. The drag partition between the roughness obstacles and the ground is analyzed using an analytical model proposed by Raupach (Boundary-Layer Meteorol 60:375-395, 1992) and is hereafter referred to as R92. The R92 is based on the premise that the wake behind an isolated roughness element can be described by a shelter area A and a shelter volume V. The individual sizes of A and V without any interference from other obstacles can be determined from scaling analysis for the spread of wakes. To upscale from an individual roughness element to n/S elements where wakes may interact, R92 adopted a background stress re-normalizing instead of reducing A or V with each element addition. This work demonstrates that R92’s approach results in a linear background stress reduction in A and V only when the ratio of n/S is small, due to a low probability of wake interactions. This probabilistic nature suggests that up-scaling from individual to multiple roughness elements can be re-formulated using stochastic averaging methods proposed here. The two approaches are shown to recover R92 under plausible conditions. An alternative scaling for the shelter volume is also proposed here using thermodynamic arguments of work and dissipation though the final outcome remains similar to R92. Comparisons between R92 and available data spanning more than two decades after R92 on blocks and vegetation-like roughness elements confirm the practical utility of R92. The agreement between R92 and this updated databases of experiments and simulations confirm the potential use of R92 in large-scale models provided that the relevant parameters accommodate certain features of the roughness element type (cube versus vegetation-like) and, to a lesser extent, their configuration throughout S. Last, a comparison between R92 and models based on first-order closure principles with constant mixing length suggests that R92 can outperform such models when evaluated across a wide range of roughness densities.

canopy turbulence↗

DOE OSTI2019

The Partition Function of the Four-Vertex Model in a Special External Field

The exactly solvable four-vertex model on a square grid with the fixed boundary conditions in a presence of a special external field is considered. Namely, we study a system in a linear field acting on the central column of the grid. The partition function of the model is calculated by the quantum inverse scattering method. The answer is written in determinantal form.

97 MATHEMATICS AND COMPUTING↗