Search NASA⌕ Search

SEARCH · Search NASA

Results for “Precursor analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Origin and effect of film sub-stoichiometry on ultraviolet, ns-laser damage resistance of hafnia single layers

Understanding the origin of laser damage-prone precursors in high index materials such as hafnia holds the key to the development of laser damage-resistant multilayer dielectric coated optics for high power and energy laser systems. In this study, we investigate the source of sub-stoichiometry, a potent laser damage precursor, in hafnia films produced by an ion beam sputtering (IBS) deposition method and the effect of such defects on the film performance upon ns ultraviolet (UV) laser (8 ns, 355 nm) exposure. Chemical analysis of data obtained via Rutherford backscattering spectroscopy (RBS) suggests that hafnia films deposited at two different planetary locations from the same deposition run exhibit anisotropic and location-dependent stoichiometries. While the oxygen-to-hafnium ratio is at the stoichiometric value of 2 for the hafnia film at the edge location, the ratio is significantly deviated and is 1.7 for that deposited at the planetary center. The sub-stoichiometric hafnia films display a much lower 1-on-1 damage onset at 1.6 ± 0.2 J/cm 2 compared to 2.3 ± 0.2 J/cm 2 in a stoichiometric film. The low damage performance films also have an over three times higher damage density at fluences above initiation. Coupled with Monte Carlo simulations, we reveal that sub-stoichiometry is primarily attributed to preferential removal of oxygen during film deposition by the bombardment of energetic reflected argon neutrals. The resulting oxygen deficiencies create the sub-bandgap states which facilitate the strong laser energy coupling and reduce the resistance to laser-induced damage in the hafnia single layer films.

36 MATERIALS SCIENCE↗

Reciprocal insulation analysis of Hi-C data shows that TADs represent a functionally but not structurally privileged scale in the hierarchical folding of chromosomes

Understanding how regulatory sequences interact in the context of chromosomal architecture is a central challenge in biology. Chromosome conformation capture revealed that mammalian chromosomes possess a rich hierarchy of structural layers, from multi-megabase compartments to sub-megabase topologically associating domains (TADs) and sub-TAD contact domains. TADs appear to act as regulatory microenvironments by constraining and segregating regulatory interactions across discrete chromosomal regions. However, it is unclear whether other (or all) folding layers share similar properties, or rather TADs constitute a privileged folding scale with maximal impact on the organization of regulatory interactions. Here, we present a novel algorithm named CaTCH that identifies hierarchical trees of chromosomal domains in Hi-C maps, stratified through their reciprocal physical insulation, which is a single and biologically relevant parameter. By applying CaTCH to published Hi-C data sets, we show that previously reported folding layers appear at different insulation levels. We demonstrate that although no structurally privileged folding level exists, TADs emerge as a functionally privileged scale defined by maximal boundary enrichment in CTCF and maximal cell-type conservation. By measuring transcriptional output in embryonic stem cells and neural precursor cells, we show that the likelihood that genes in a domain are coregulated during differentiation is also maximized at the scale of TADs. Finally, we observe that regulatory sequences occur at genomic locations corresponding to optimized mutual interactions at the same scale. Our analysis suggests that the architectural functionality of TADs arises from the interplay between their ability to partition interactions and the specific genomic position of regulatory sequences.

Biochemistry & Molecular Biology↗

RetSynth: determining all optimal and sub-optimal synthetic pathways that facilitate synthesis of target compounds in chassis organisms

The efficient biological production of industrially and economically important compounds is a challenging problem. Brute-force determination of the optimal pathways to efficient production of a target chemical in a chassis organism is computationally intractable. Many current methods provide a single solution to this problem, but fail to provide all optimal pathways, optional sub-optimal solutions or hybrid biological/non-biological solutions. Here we present RetSynth, software with a novel algorithm for determining all optimal biological pathways given a starting biological chassis and target chemical. By dynamically selecting constraints, the number of potential pathways scales by the number of fully independent pathways and not by the number of overall reactions or size of the metabolic network. This feature allows all optimal pathways to be determined for a large number of chemicals and for a large corpus of potential chassis organisms. Additionally, this software contains other features including the ability to collect data from metabolic repositories, perform flux balance analysis, and to view optimal pathways identified by our algorithm using a built-in visualization module. This software also identifies sub-optimal pathways and allows incorporation of non-biological chemical reactions, which may be performed after metabolic production of precursor molecules. The novel algorithm designed for RetSynth streamlines an arduous and complex process in metabolic engineering. Our stand-alone software allows the identification of candidate optimal and additional sub-optimal pathways, and provides the user with necessary ranking criteria such as target yield to decide which route to select for target production. Furthermore, the ability to incorporate non-biological reactions into the final steps allows determination of pathways to production for targets that cannot be solely produced biologically. With this comprehensive suite of features RetSynth exceeds any open-source software or webservice currently available for identifying optimal pathways for target production.

59 BASIC BIOLOGICAL SCIENCES↗

Higgs decays to Z Z and Z γ in the standard model effective field theory: An NLO analysis [Higgs decays to Z Z and Z γ in the SMEFT: An NLO analysis]

Here, we calculate the complete one-loop electroweak corrections to the inclusive H → ZZ and H → Zγ decays in the dimension-6 extension of the Standard Model Effective Field Theory (SMEFT). The corrections to H → ZZ are computed for on-shell Z bosons and are a precursor to the physical H → Zff¯ calculation. We present compact numerical formulas for our results and demonstrate that the logarithmic contributions that result from the renormalization group evolution of the SMEFT coefficients are larger than the finite NLO contributions to the decay widths. As a by-product of our calculation, we obtain the first complete result for the finite corrections to Gμ in the SMEFT.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

PRECURSORS TO INTERSTELLAR SHOCKS OF SOLAR ORIGIN

On or about 2012 August 25, the Voyager 1 spacecraft crossed the heliopause into the nearby interstellar plasma. In the nearly three years that the spacecraft has been in interstellar space, three notable particle and field disturbances have been observed, each apparently associated with a shock wave propagating outward from the Sun. Here, we present a detailed analysis of the third and most impressive of these disturbances, with brief comparisons to the two previous events, both of which have been previously reported. The shock responsible for the third event was first detected on 2014 February 17 by the onset of narrowband radio emissions from the approaching shock, followed on 2014 May 13 by the abrupt appearance of intense electron plasma oscillations generated by electrons streaming outward ahead of the shock. Finally, the shock arrived on 2014 August 25, as indicated by a jump in the magnetic field strength and the plasma density. Various disturbances in the intensity and anisotropy of galactic cosmic rays were also observed ahead of the shock, some of which are believed to be caused by the reflection and acceleration of cosmic rays by the magnetic field jump at the shock, and/or by interactions with upstream plasma waves. Comparisons to the two previous weaker events show somewhat similar precursor effects, although differing in certain details. Many of these effects are very similar to those observed in the region called the “foreshock” that occurs upstream of planetary bow shocks, only on a vastly larger spatial scale.

79 ASTRONOMY AND ASTROPHYSICS↗

High expression of diffuse panbronchiolitis critical region 1 gene promotes cell proliferation, migration and invasion in pancreatic ductal adenocarcinoma

Highlights: • DPCR1 is overexpressed in PDAC and correlates with prognosis of PDAC patients. • Inhibition of DPCR1 suppresses PDAC cell proliferation in vitro and in vivo. • Inhibition of DPCR1 suppresses PDAC cell migration and invasion. • DPCR1 may promote tumor progression by regulating NF-κB pathway. Diffuse panbronchiolitis critical region 1 (DPCR1) is located in the major histocompatibility complex (MHC) class I. It was reported to be downregulated in invasive pituitary adenoma compared with that in non-invasive tumors, but upregulated in the precursor of gastric carcinogenesis. However, the direct effect of DPCR1 on cancer cells has rarely been reported, and the role DPCR1 in pancreatic ductal adenocarcinoma (PDAC) remains unclear. The clinical sample validation and public data analysis of the present study demonstrated that DPCR1 was upregulated markedly in PDAC and this high expression was negatively correlated with the patient prognosis. Functionally, knocking down DPCR1 in PDAC cell lines inhibited cell proliferation, migration and invasion in vitro. Tumor xenograft experiments further showed that suppression of DPCR1 inhibited tumor growth in vivo. In addition, the results of RNA deep sequencing and qRT-PCR assay showed that DPCR1 participated in PADC progression by regulating nuclear factor-kappa B signaling pathway, suggesting that it might be a novel oncogene in tumor progression and a potential therapeutic target in PDAC as well.

60 APPLIED LIFE SCIENCES↗

Enhancing stability of poly(1,3-cyclohexadiene)-based materials by bromination and dehydrobromination

In order to improve their thermal stability, poly(1,3-cyclohexadiene) (PCHD) homopolymer, diblock copolymer of PCHD with styrene (PCHD-b-PS), and crosslinked PCHD membranes were dehydrogenated by addition of bromine to the polymer in solution, followed by dehydrobromination using an isothermal treatment at elevated temperature. The brominated PCHD materials thus obtained were characterized via FT-IR and thermogravimetric analysis (TGA) before and after dehydrobromination. Dehydrobromination was performed inside a TGA instrument, allowing insight into thermal stability of the analytes to be obtained. The dehydrobrominated PCHD samples were characterized using elemental analysis, and it was found the dehydrogenation of PCHD to polyphenylene was not complete. Nevertheless, some aromatization did occur, and the thermal stability of the treated polymer was greatly enhanced as compared to its PCHD precursor. Such materials may thus be of interest as high carbon content, graphene-like films. Crosslinked PCHD membranes and PCHD-b-PS diblock copolymers were treated via the same bromination/pyrolysis process, which resulted in markedly improved thermal stabilities for these materials as well.

bromination↗

Structural characterization of layered Na 0.5 Co 0.5 Mn 0.5 O 2 material as a promising cathode for sodium-ion batteries

Layered Na0.5Co0.5Mn0.5O2 material is synthesized through a facile mixed hydroxy-carbonate route using (Co0.5Mn0.5)2(OH)2CO3 precursor and well characterized as a hexagonal layered structure under P63/mmc space group. The lattice parameters and unit cell volume (a ¼ 2.8363 Å, c ¼ 11.3152 Å and V ¼ 78.83 Å3 ) are calculated by Rietveld refinement analysis. A flaky-bundle morphology is obtained to the layered Na0.5Co0.5Mn0.5O2 material with the hexagonal flake size ~30 nm. Advanced transmission electron microscopic images are revealed the local structure of the layered Na0.5Co0.5Mn0.5O2 material with contrasting bright dots and faint dark dots corresponding to the Co/Mn and Na atoms. Two oxidation and reduction peaks are occurred in a cyclic voltammetric analysis corresponding to Co3þ/Co4þ and Mn3þ/Mn4þ redox processes. These reversible processes are attributed to the intercalation/de-intercalation of Naþ ions into the host structure of layered Na0.5Co0.5Mn0.5O2 material. Accordingly, the sodium cell is delivered the initial charge-discharge capacity 53/144 mAh g1 at 0.5 C, which cycling studies are extended to rate capability test at 1 C, 3 C and 5C. Eventually, the Na-ion full-cell is yielded cathode charge-discharge capacity 55/52 mAh g1 at 0.212 mA and exhibited as a high voltage cathode for Na-ion batteries.

Cathode performance↗

Non-small cell lung cancer cell–derived exosomal miR-17-5p promotes osteoclast differentiation by targeting PTEN

Highlights: • exosomes of SPC-A-1BM cell line prompt osteoclastogenesis. • miR-17-5p increased in exosomes of SPC-A-1BM cell line. • miR-17-5p prompt osteoclastogenesis. • miR-17-5p function through PTEN/PI3K/AKT pathway in osteoclastogenesis in NSCLC. Aberrant activity of bone resorbing osteoclasts plays a key role in the development of osteoporosis and cancer bone metastasis. The identification of novel and specific targets will be helpful for the development of new therapeutic strategies for bone metastasis in lung cancer. Herein, we examined microRNAs in tumor cell-derived exosomes to investigate the communication between the bone environment and tumor cells. TCGA database analysis showed that the level of miR-17-5p increased in non-small cell lung cancer tissues compared with non-tumor tissues. To investigate the function of exosomes in inducing osteoclastogenesis, osteoclast precursors were incubated with exosomes isolated from non-small cell lung cancer cell line, as well as receptor activator of NF-KB ligand and M-CSF to induce osteoclastogenesis. We found that exosomal miR-17-5p is upregulated in a non-small cell lung cancer cell line with bone metastasis compared with the original cell line. Overexpression of miR-17-5p enhanced the osteoclastogenesis of RAW264.7 cells. PTEN was identified as a direct target of miR-17-5p and showed negative effects on osteoclastogenesis. Importantly, treatment of LY294002 (an inhibitor of the PI3K/Akt pathway) attenuated miR-17-5p-mediated osteoclastogenesis effects. Taken together, our findings demonstrated that miR-17-5p promotes osteoclastogenesis through the PI3K/Akt pathway via targeting PTEN in lung cancer.

60 APPLIED LIFE SCIENCES↗

In Situ Neutron Diffraction Studies of the Ion Exchange Synthesis Mechanism of Li 2 Mg 2 P 3 O 9 N: Evidence for a Hidden Phase Transition

Motivated by predictions made using a bond valence sum difference map (BVS-DM) analysis, the novel Li-ion conductor Li 2 Mg 2 P 3 O 9 N was synthesized in this paper by ion exchange from a Na 2 Mg 2 P 3 O 9 N precursor. Impedance spectroscopy measurements indicate that Li 2 Mg 2 P 3 O 9 N has a room temperature Li-ion conductivity of about 10 –6 S/cm (comparable to LiPON), which is 6 orders of magnitude higher than the extrapolated Na-ion conductivity of Na 2 Mg 2 P 3 O 9 N at this temperature. The structure of Li 2 Mg 2 P 3 O 9 N was determined from ex situ synchrotron and time-of-flight neutron diffraction data to retain the P2 1 3 space group, though with a cubic lattice parameter of a = 9.11176(8) Å that is significantly smaller than the a = 9.2439(1) Å of Na 2 Mg 2 P 3 O 9 N. The two Li-ion sites are found to be very substantially displaced (~0.5 Å) relative to the analogous Na sites in the precursor phase. The non-molten salt ion exchange method used to prepare Li 2 Mg 2 P 3 O 9 N produces a minimal background in powder diffraction experiments, and was therefore exploited for the first time to follow a Li + /Na + ion exchange reaction using in situ powder neutron diffraction. Lattice parameter changes during ion exchange suggest that the reaction proceeds through a Na 2–x Li x Mg 2 P 3 O 9 N solid solution (stage 1) followed by a two-phase reaction (stage 2) to form Li 2 Mg 2 P 3 O 9 N. However, full Rietveld refinements of the in situ neutron diffraction data indicate that the actual transformation mechanism is more complex and instead involves two thermodynamically distinct solid solutions in which the Li exclusively occupies the Li1 site at low Li contents (stage 1a) and then migrates to the Li3 site at higher Li contents (stage 1b), a crossover driven by the different signs of the local volume change at these sites. Finally, in addition to highlighting the importance of obtaining full structural data in situ throughout the ion exchange process, these results provide insights into the general question of what constitutes a thermodynamic phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unconventional chiral charge order in kagome superconductor KV 3 Sb 5

Intertwining quantum order and non-trivial topology is at the frontier of condensed matter physics. A charge-density-wave-like order with orbital currents has been proposed for achieving the quantum anomalous Hall effect in topological materials and for the hidden phase in cuprate high-temperature superconductors. However, the experimental realization of such an order is challenging. Here we use high-resolution scanning tunnelling microscopy to discover an unconventional chiral charge order in a kagome material, KV 3 Sb 5 , with both a topological band structure and a superconducting ground state. Through both topography and spectroscopic imaging, we observe a robust 2 × 2 superlattice. Spectroscopically, an energy gap opens at the Fermi level, across which the 2 × 2 charge modulation exhibits an intensity reversal in real space, signalling charge ordering. At the impurity-pinning-free region, the strength of intrinsic charge modulations further exhibits chiral anisotropy with unusual magnetic field response. Therefore theoretical analysis of our experiments suggests a tantalizing unconventional chiral charge density wave in the frustrated kagome lattice, which can not only lead to a large anomalous Hall effect with orbital magnetism, but also be a precursor of unconventional superconductivity.

36 MATERIALS SCIENCE↗

Rational design of an argon-binding superelectrophilic anion

Chemically binding argon (Ar) at room temperature has remained the privilege of the most reactive electrophiles, all of which are cationic (or even dicationic) in nature. Herein, we report a concept for the rational design of anionic superelectrophiles that comprise a strong electrophilic center firmly embedded in a negativelycharged framework of exceptional stability. To validate our concept, we synthesized the percyano-dodecoborate [B12(CN)12]2-, the electronically most stable dianion ever investigated experimentally. It serves as a precursor for the generation of the monoanion [B12(CN)11]-, which indeed spontaneously binds Ar at 298 K. Our mass spectrometric and spectroscopic studies are accompanied by high-level computational investigations including a bonding analysis of the exceptional B-Ar bond. The first detection and characterization of this highly reactive, structurally stable anionic superelectrophile starts a new chapter in the metal-free activation of particularly inert compounds and elements.

Mayer, Martin↗

Radiotracers For Lipid Signaling Pathways In Biological Systems

The primary focus of this project continues to be the development of radiotracers and radiotracer methodology for studying physiology and biochemistry. The compounds that have been labeled areacylethanolamines and acylglycerols that are, as classes, represented in both in plants and in animals. In the latter, some of these act as ligands for cannabinoid receptors and they are therefore known as endocannabinoids. Cannabinoid receptors are not found in plant genomes so that plants must contain other receptors and signaling systems that use acylethanolamines. Relatively little work has been done on that issue, though acylethanolamines do modulate plant growth and stress resistance, thus possessing obvious relevance to agriculture and energy production. Progress has been described in five peer-reviewed papers and seven meeting abstracts. Preparation of 2-acylglycerol lipid messengers in high purity. A novel enzymatic synthesis was developedthat gave pure 2-acylglycerols free of any rearrrangement to the thermodynamically more stable 1(3)-acylglycerol byproducts. The method utilized 1,3-dibutyryl-2-acylglycerol substrate ethanolysis by a resinimobilized lipase. Thus, pure radiolabeled 2-acylglycerols can now be conveniently prepared just prior to their utilization. These synthetic studies were published in the Journal of Medicinal Chemistry, 2011. Diacylglycerol lipase assay methodology. Diacylglycerol lipases (DAGLs) generate 2- acylglycerols, and are thus potential targets for disease- or growth-modifying agents, by means of reducing formation of 2-acylglycerols. A radioTLC assay of the hydrolysis of radiolabeled diglyceride substrate [1''-carbon-14]2-arachidonoyl-1-stearoyl-sn-glycerol has been implemented, and used to validate a novel, potentially highthroughput fluorescence resonance energy transfer (FRET) based assay. A number of new DAGL inhibitors that have selectivity for DAGLs were synthesized and screened. This work was very recently published in Bioorganic and Medicinal Chemistry Letters.Acylethanolamines. The work initially focused on myristoylethanolamine (MEA) labeled in the acyl moiety with tritium and with carbon-14. Standard coupling conditions were used and gave the desired radiotracers in decent yields. Tritiated product was needed for the search for binding sites of this signaling messenger, and C-14 labeled product for imaging using phosphorimaging screens. Additionally, C-14 MEA was prepared labeled in the ethanolamine moiety. Fluorine-18 labeled acylethanolamines. A multi-step synthesis was performed to obtain unlabeled N-(16- fluorohexadecanoyl)ethanolamide for an HPLC standard via the precursor 16-bromo-N- [2[(tetrahydro-2Hpyran-2-yl)oxy]ethyl]hexadecanoylamide. Near-anhydrous F-18 and the bromo precursor (approximately 2-3 mg) in acetonitrile (0.5 ml) were heated with a PETWave microwave reactor for 10 min at 80 °C. F-18 incorporation was checked using silica-gel TLC (8:92 methanol/chloroform). Deprotection was carried out using TFA. The crude product was purified by semi-preparative ODS HPLC (80:20 AcN/ H2O). The product peak was diluted in water, concentrated on an SPE column, and eluted in 1 mL EtOH. F-18 incorporation to form the THP protected product was >90% with negligible side products observed. Deprotection and HPLC purification proceeded successfully with >99% radiochemical l purity. Brain distribution studies were done in mice. This work was presented at the Society of Nuclear Medicine meeting in June 2012. Subsequent more detailed studies including whole body tissue distribution studies, microPET experiments and radiochromatographic studies were published in ACS Chemical Neurosciences in 2014. Iodine-125 labeled acylethanolamines. The precursor 12-bromo-N-[2[(tetrahydro-2H-pyran-2-yl)oxy]ethyl]dodecanoylamide was prepared and a 1 mg sample was subject to exchange labeling withradioiodide in refluxing acetonitrile for 1 hour. HPLC analysis as above indicated incorporation of about10% of the radioactivity into a compound with the expected retention time of the corresponding iodocompound. Treatment with TFA converted the radioactivity into a compound with the expected retentiontime of 12-iodododenanoyl ethanolamine. Radiotracer studies in plants. One of the aims of this funding was to follow up the studies of Tripathy et al. (Plant Physiol., 2003) who first reported high affinity binding sites for tritiated myristoylethanolamine in plants, and also reported blockage of these sites by the cannabinoid receptor antagonist AM281. Because plant genomes do not contain genes for cannabinoid receptors, this was an intriguing report. I-125 labeled AM281 was therefore prepared, to facilitate identification of binding sites for this compound in Arabodopsis thaliana plants. However, such sites could not be found, the binding studies were repeated in tobacco plants. Again, binding sites for AM281 were not found. Additionally, it has become evident that clear demonstration of binding sites for tritiated MEA is obscured by metabolic incorporation of radioactivity into plant tissues. Studies on this issue are being aggressively pursued. Binding methodologies used in experiments with animal tissues require modification for their optimal use with plant tissues. Detailed studies of [14C]myristoylethanolamine isotopomers and of [14C]arachidonoylethanolamine isotopomers Since the labeled compounds being prepared for experiments with plants may have utility in Nuclear Medicine, studies were conducted with some of these compounds in mice. The brain uptake of C-14 MEA labeled in either acyl or ethanolamine moiety was 3-4 fold higher than uptake of C-14 myristic acid or C-14 ethanolamine. Carrier MEA increased brain uptake. Autoradiographs of MEA showed regionally specific uptake, with somewhat different patterns for acyl and ethanolamine isotopomers. It is hypothesized that these labeled compounds might form the basis of autoradiographic imaging of regional activity of enzymes such as fatty acid amide hydrolase, which may regulate endocannabinoid tone in animals. Early results were presented at the 2011 ICRS meeting, and at the 2012 Society for Neurosciences. Narachidonoylethanolamine is an endocannabinoid signaling messenger in animals and is known as “anandamide”. It is one of several families of signaling molecules derived from arachidonic acid, the principal omega-6 polyunsaturated fatty acids (PUFA’s) in animal species. Other derivatives of arachidonic acid include thromboxanes and prostaglandins. Full details of the studies with the ethanolamide isotopomers were a part of the PhD dissertation of Kun Hu (nee Qian), and were submitted for publication to Nuclear Medicine and Biology in August 2016. Syntheses of [14C]docosahexanoylethanolamine isotopomers and preliminary biological investigations Docosahexaenoic acid (DHA) is the omega-3 PUFA that can be regarded in some respects as the counterpart of arachidonic acid in the omega-6 series. While arachidonic acid is proinflammatory, DHA is anti-inflammatory, and foods high in DHA (or artificially enriched in DHA) are commonly regarded as promoting health. In contrast to the large literature on the Nethanolamide of arachidonic acid (i.e. the endocannabinoid anandamide) as of now (9/25/2016) there are only six papers on the corresponding ethanolamide of DHA, and when our studies under this grant began there were none. Beneficial actions of endogenously produced DHAethanolamine (“synaptamide”) have been indicated, and to help elucidate the possible roles of synaptamide, we have synthesized this molecule for the first time labeled with C-14 in either the ethanolamine moiety or the fatty acid moiety. Studies of the disposition of endogenously administered isotopomers of DHA-ethanolamine are in progress, to complement tissue culture experiments evaluation hypothesized protective effects of this DHA derivative.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Preparation and Characterization of Materials for Low- to Intermediate-Temperature CO2 Adsorption

Global carbon dioxide emissions are rising and the use of fossil fuels in several sectors are the leading causes. As global population and economies continue to grow significantly, the most practical method of lowering such emissions is to capture CO2. Although other technologies are more developed, adsorption is very promising and has attracted much attention. To ensure this technology’s success, it is essential to have suitable CO2 adsorbent materials. In this work, several new hydrotalcites (HTs) with different initial concentrations of ion precursors were prepared for the first time by the co-precipitation method—it was possible to verify that the ion concentrations influence the characteristics of the materials. The prepared HTs were characterized by thermogravimetric analysis (TG), X-Ray diffraction (XRD), surface area measurements and temperature-programmed desorption of CO2 (TPD-CO2) to relate their CO2 capture capacity to their physicochemical properties; the CO2 adsorption equilibrium isotherms were determined at 35 and 300 °C for the prepared samples, as well as for some commercial materials: magnesium oxide, calcium oxide, aluminium oxide and Zeolite 13X. After determining which materials present the best CO2 adsorption capacity, these were submitted to adsorption-desorption cycles to study their stability. The main objective of the work was to prepare and study different CO2 adsorbents for processes that are carried out at low and intermediate temperatures. From the experimental results, it was possible to conclude that the Zeolite 13X showed the best capacity at 35 °C, 3.38 mmol·g−1 (@ pCO2 = 1 bar), and a prepared calcined HT (c-HT2) was the best at 300 °C, 0.97 mmol·g−1 (@ pCO2 = 1 bar). Moreover, it seems there is an optimum initial concentration of the ions’ solutions for the tested HTs, which depends on the final application—c-HT1 showed a better capacity at 35 °C and c-HT2 at 300 °C. From the adsorption-desorption cycles—performed at 35 and 300 °C with the best materials using a magnetic suspension microbalance at 1 bar of CO2 partial pressure —, a working cyclic capacity of 2.69 mmol∙g−1 was achieved by the Zeolite at 35 °C; in turn, c-HT2 showed a working cyclic capacity of 0.79 mmol∙g−1 at 300 °C.

Figueiredo, Anabela↗

BETO 2021 Peer Review - Waste Carbon Gas Upgrading via Acetogens 2.3.2.106

Waste carbon gas represents a large and diverse set of feedstocks that could be captured and turned into useful products. This includes waste gas emitted from industrial activity, syngas from burned plant biomass or processed municipal waste, and electrochemical reduction of CO2. Currently, carbon gas is being microbially converted to ethanol as a main product. However, ethanol is a lower value product with a limited market size. While these microbes can make other higher value products, there are no commercial processes for generating these other products, leaving a gap in understanding potential implementation for commercialization. Expanding the products microbially produced from waste carbon gas requires several steps before commercial implementation. We are studying the acetogen Clostridium ljungdahlii as a biocatalyst to convert waste carbon gas to the chemical 3-hydroxybutyrate (3HB), a plastic monomer and fuel precursor. For that, we are studying and engineering microbial characteristics for novel 3HB product formation from waste gas streams. This includes metabolic characterization, genetic engineering, gas fermentation scaling, as well as technoeconomic and life cycle analysis.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

The Center for Momentum Transport and Flow Organization in Plasmas - Final Scientific Report

Overview of University of Colorado Efforts: The University of Colorado group has focused on two primary fronts during the grant period: development of a variety of multi-point diagnostic and/or imaging analysis techniques, and momentum-transport related experiments on a variety of devices (NSTX at PPPL, CSDX at UCSD, LAPD at UCLA, DIII-D at GA). Experimental work has taken advantage of several diagnostic instruments, including fast-framing cameras for imaging of electron density fluctuations (either directly or using injected gas puffs), ECEI for imaging of electron temperature fluctuations, and multi-tipped Langmuir and magnetic probes for corroborating measurements of Reynolds and Maxwell stresses. Mode Characterization in CSDX: We have performed a series of experiments at the CSDX linear device at UCSD, in collaboration with Center PI G. Tynan's group. The experiments included a detailed study of velocity estimation techniques, including direct comparisons between Langmuir probes and image-based velocimetry from fast-framing camera data. We used the camera data in a second set of studies to identify the spatial and spectral structure of coherent modes, which illuminates wave behavior to a level of detail previously unavailable, and enables direct comparison of dispersion curves to theoretical estimates. In another CSDX study, similar techniques were used to demonstrate a controlled transition from nonlinearly coupled discrete eigenmodes to fully developed broadband turbulence. The axial magnetic field was varied from 40-240 mT, which drove the transition. At low magnetic fields, the plasma is dominated by drift waves. As the magnetic field is increased, a strong potential gradient at the edge introduces an ExB shear-driven instability. At the transition, another mode with signatures of a rotation-induced Rayleigh–Taylor instability appears at the central plasma region. Concurrently, large axial velocities were found in the plasma core. For larger magnetic fields, all of the instabilities co-exist, leading to rich plasma dynamics and fully developed broadband turbulence. Edge-Turbulence and Flow Experiments in NSTX: A series of Gas Puff Imaging (GPI) observations on NSTX revealed a quasi-periodic oscillation in the plasma edge preceding the L-H transition in a limited set of neutral beam heated plasmas. These ~3 kHz flow oscillations exhibit both long wavelength and long correlation lengths, suggesting they are zonal-flow-like. The flow oscillations are strongly correlated with modulations of the level of edge turbulence, thus the system appears to undergo a predator--prey-type limit-cycle preceding the L-H transition. However, a clear trigger for the L-H transition was not observed. Reynolds stress profiles were obtained directly from image velocimetry for L-mode periods ELM-Precursor Studies in NSTX: A separate study based on NSTX-GPI data captured the two-dimensional evolution of edge-localized mode (ELM) precursors. Precursor events were observed preceding ELMs and ELM-induced H–L back-transitions in radio-frequency heated H-mode plasmas, and the growth of the precursor mode through the ELM filamentation was imaged in the plane perpendicular to the local B-field. Strong edge intensity modulations appeared to propagate in the electron diamagnetic direction while steadily drifting radially outwards. Intensity fluctuations were observed at frequencies around 20 kHz and wavenumbers of 0.05-0.2 cm -1 . Upon growing to a trigger point, precursor fluctuations were seen to form filamentary structures and move into the scrape-off layer (SOL) explosively with radial velocities peaking at 8 km/s. Once in the SOL, filaments reverse their propagation direction and travel in the ion diamagnetic direction. Edge intensity fluctuations were strongly correlated with magnetic signals from Mirnov coils, and toroidally distributed coils estimated toroidal mode numbers of n=5-10. Quantitatively similar precursors have been observed in ohmic H-mode plasmas as well, though significantly fewer events are seen in the ohmic cases and none were observed in the near-threshold NBI H-modes studied. Development of Velocimetry and Image Analysis Techniques: Along with the experiments listed above, the Colorado group has continued to explore various velocimetry techniques and their range of validity. We have developed a “linear optical flow” code, which calculates smooth velocity maps while accurately assessing local regions of high curl. This is critical for separating spatial scales of velocity behavior, and thus transport. This code has recently come on-line, and we are currently using it to revisit a number of older datasets. Additionally, we have worked on developing pattern-recognition techniques for imaging diagnostics, based on established digital image compression algorithms. This has the potential to open the analysis of turbulent plasma behavior beyond the well-trodden Fourier and wavelet approaches. Finally, we have extended several of these image-analysis routines to multiple other diagnostic sets, including GPI datasets in NSTX and ECEI imaging on DIII-D. In one study, correlation maps were used to measure the full 2-D mode structure of drift-wave level structures using ECEI for the first time. This enabled direct comparison to gyrokinetic simulations using the GEM code, from which is was determined that TEM modes were being measured in DIII-D.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The potential role of organics in new particle formation and initial growth in the remote tropical upper troposphere

Abstract. Global observations and model studies indicate that new particle formation (NPF) in the upper troposphere (UT) and subsequent particles supply 40 %–60 % of cloud condensation nuclei (CCN) in the lower troposphere, thus affecting the Earth's radiative budget. There are several plausible nucleation mechanisms and precursor species in this atmospheric region, which, in the absence of observational constraints, lead to uncertainties in modeled aerosols. In particular, the type of nucleation mechanism and concentrations of nucleation precursors, in part, determine the spatial distribution of new particles and resulting spatial distribution of CCN from this source. Although substantial advances in understanding NPF have been made in recent years, NPF processes in the UT in pristine marine regions are still poorly understood and are inadequately represented in global models. Here, we evaluate commonly used and state-of-the-art NPF schemes in a Lagrangian box model to assess which schemes and precursor concentrations best reproduce detailed in situ observations. Using measurements of aerosol size distributions (0.003 < Dp < 4.8 µm) in the remote marine troposphere between ∼0.18 and 13 km altitude obtained during the NASA Atmospheric Tomography (ATom) mission, we show that high concentrations of newly formed particles in the tropical UT over both the Atlantic and Pacific oceans are associated with outflow regions of deep convective clouds. We focus analysis on observations over the remote Pacific Ocean, which is a region less perturbed by continental emissions than the Atlantic. Comparing aerosol size distribution measurements over the remote Pacific with box model simulations for 32 cases shows that none of the NPF schemes most commonly used in global models, including binary nucleation of sulfuric acid and water (neutral and ion-assisted) and ternary involving sulfuric acid, water, and ammonia, are consistent with observations, regardless of precursor concentrations. Through sensitivity studies, we find that the nucleation scheme among those tested that is able to explain most consistently (21 of 32 cases) the observed size distributions is that of Riccobono et al. (2014), which involves both organic species and sulfuric acid. The method of Dunne et al. (2016), involving charged sulfuric acid–water–ammonia nucleation, when coupled with organic growth of the nucleated particles, was most consistent with the observations for 5 of 32 cases. Similarly, the neutral sulfuric acid–water–ammonia method of Napari (2002), when scaled with a tuning factor and with organic growth added, was most consistent for 6 of 32 cases. We find that to best reproduce both nucleation and growth rates, the mixing ratios of gas-phase organic precursors generally need to be at least twice that of SO2, a proxy for dimethyl sulfide (DMS). Unfortunately, we have no information on the nature of oxidized organic species that participated in NPF in this region. Global models rarely include organic-driven nucleation and growth pathways in UT conditions where globally significant NPF takes place, which may result in poor estimates of NPF and CCN abundance and contribute to uncertainties in aerosol–cloud–radiation effects. Furthermore, our results indicate that the organic aerosol precursor vapors may be important in the tropical UT above marine regions, a finding that should guide future observational efforts.

54 ENVIRONMENTAL SCIENCES↗

Impact of pH and urea content on size and luminescence of upconverting Y2O3:Yb, Er nanophosphors

Highlights: • The granula size, morphology and upconversion luminescence of Y{sub 2}O{sub 3}:Yb{sup 3+}, Er{sup 3+} nanophosphors was tuned via altering the pH values and urea contents. • Steady state and transient spectroscopy along with FTIR analysis are performed to clarify the insight photophysical mechanism. • Nonradiative transition probability modulation due to the OH{sup −} group variation could be responsible for improved R/G intensity ratio. - Abstract: The pH value and urea concentration of precursor dramatically impact on the particle size, morphology and upconversion luminescence of Y{sub 2}O{sub 3}:Yb{sup 3+} , Er{sup 3+} nanophosphors. The lower pH leads to the smaller granula size of the final product, for instance, the crystalline size reduces from ∼30 nm to ∼16 nm as pH value varies from 9.3 to 6.7. The intensity of green (2H11/2, 4S3/2 → 4I15/2) and red emission (4F9/2 → 4I15/2) can be effectively and readily tuned by adjusting the pH value and urea content of precursor solution. The sample derived at pH of 6.7 and urea content of 384 mg/mL exhibits the highest red to green ratio, as a result of more surface defects and hydroxyl residues. Besides, the upconversion lifetime investigation further proved that the quenching and nonradiative relaxation from 2H11/2 and 4S3/2 to 4F9/2 caused by the surface defects could be responsible for the relative enhancement of the red emission.

77 NANOSCIENCE AND NANOTECHNOLOGY↗